Debian Codegraph @

plat/intel/soc/agilex5/include/socfpga_plat_def.h

raw
1 /*
2 * Copyright (c) 2019, ARM Limited and Contributors. All rights reserved.
3 * Copyright (c) 2019-2023, Intel Corporation. All rights reserved.
4 * Copyright (c) 2024, Altera Corporation. All rights reserved.
5 *
6 * SPDX-License-Identifier: BSD-3-Clause
7 */
8
9 #ifndef PLAT_SOCFPGA_DEF_H
10 #define PLAT_SOCFPGA_DEF_H
11
12 #include "agilex5_memory_controller.h"
13 #include "agilex5_system_manager.h"
14
15 #include <platform_def.h>
16
17 /* Platform Setting */
18 #define PLATFORM_MODEL PLAT_SOCFPGA_AGILEX5
19 /* 1 = Flush cache, 0 = No cache flush.
20 * Default for Agilex5 is Cache flush.
21 */
22 #define CACHE_FLUSH 1
23 #define MMC_DEVICE_TYPE 1 /* MMC = 0, SD = 1 */
24 #define XLAT_TABLES_V2 U(1)
25 #define PLAT_PRIMARY_CPU_A55 0x000
26 #define PLAT_PRIMARY_CPU_A76 0x200
27 #define PLAT_CLUSTER_ID_MPIDR_AFF_SHIFT MPIDR_AFF2_SHIFT
28 #define PLAT_CPU_ID_MPIDR_AFF_SHIFT MPIDR_AFF1_SHIFT
29 #define PLAT_L2_RESET_REQ 0xB007C0DE
30 #define PLAT_HANDOFF_OFFSET 0x0007F000
31 #define PLAT_TIMER_BASE_ADDR 0x10D01000
32
33 /* System Counter */
34 /* TODO: Update back to 400MHz.
35 * This shall be updated to read from L4 clock instead of hardcoded.
36 */
37 #define PLAT_SYS_COUNTER_FREQ_IN_TICKS U(400000000)
38 #define PLAT_SYS_COUNTER_FREQ_IN_MHZ U(400)
39
40 /* FPGA config helpers */
41 #define INTEL_SIP_SMC_FPGA_CONFIG_ADDR 0x80400000
42 #define INTEL_SIP_SMC_FPGA_CONFIG_SIZE 0x82000000
43
44 /* QSPI Setting */
45 #define CAD_QSPIDATA_OFST 0x10900000
46 #define CAD_QSPI_OFFSET 0x108d2000
47
48 /* FIP Setting */
49 #define PLAT_FIP_BASE (0)
50 #if ARM_LINUX_KERNEL_AS_BL33
51 #define PLAT_FIP_MAX_SIZE (0x8000000)
52 #else
53 #define PLAT_FIP_MAX_SIZE (0x1000000)
54 #endif
55
56 /* SDMMC Setting */
57 #if ARM_LINUX_KERNEL_AS_BL33
58 #define PLAT_MMC_DATA_BASE (0x90000000)
59 #define PLAT_MMC_DATA_SIZE (0x100000)
60 #define SOCFPGA_MMC_BLOCK_SIZE U(32768)
61 #else
62 #define PLAT_MMC_DATA_BASE (0x0007D000)
63 #define PLAT_MMC_DATA_SIZE (0x2000)
64 #define SOCFPGA_MMC_BLOCK_SIZE U(8192)
65 #endif
66
67 /* Register Mapping */
68 #define SOCFPGA_CCU_NOC_REG_BASE 0x1c000000
69 #define SOCFPGA_F2SDRAMMGR_REG_BASE 0x18001000
70
71 #define SOCFPGA_MMC_REG_BASE 0x10808000
72 #define SOCFPGA_MEMCTRL_REG_BASE 0x108CC000
73 #define SOCFPGA_RSTMGR_REG_BASE 0x10d11000
74 #define SOCFPGA_SYSMGR_REG_BASE 0x10d12000
75 #define SOCFPGA_PINMUX_REG_BASE 0x10d13000
76 #define SOCFPGA_NAND_REG_BASE 0x10B80000
77 #define SOCFPGA_ECC_QSPI_REG_BASE 0x10A22000
78
79 #define SOCFPGA_L4_PER_SCR_REG_BASE 0x10d21000
80 #define SOCFPGA_L4_SYS_SCR_REG_BASE 0x10d21100
81 #define SOCFPGA_SOC2FPGA_SCR_REG_BASE 0x10d21200
82 #define SOCFPGA_LWSOC2FPGA_SCR_REG_BASE 0x10d21300
83 #define SOCFPGA_SDMMC_SECU_BIT 0x40
84 #define SOCFPGA_LWSOC2FPGA_ENABLE 0xffe0301
85 #define SOCFPGA_SDMMC_SECU_BIT_ENABLE 0x1010001
86
87
88 /* Define maximum page size for NAND flash devices */
89 #define PLATFORM_MTD_MAX_PAGE_SIZE U(0x2000)
90
91 /* OCRAM Register*/
92
93 #define OCRAM_REG_BASE 0x108CC400
94 #define OCRAM_REGION_0_OFFSET 0x18
95 #define OCRAM_REGION_0_REG_BASE (OCRAM_REG_BASE + \
96 OCRAM_REGION_0_OFFSET)
97 #define OCRAM_NON_SECURE_ENABLE 0x0
98
99 /*******************************************************************************
100 * Platform memory map related constants
101 ******************************************************************************/
102 #define DRAM_BASE (0x80000000)
103 #define DRAM_SIZE (0x80000000)
104
105 #define OCRAM_BASE (0x00000000)
106 #define OCRAM_SIZE (0x00080000)
107
108 #define MEM64_BASE (0x0080000000)
109 #define MEM64_SIZE (0x0080000000)
110
111 //128MB PSS
112 #define PSS_BASE (0x10000000)
113 #define PSS_SIZE (0x08000000)
114
115 //64MB MPFE
116 #define MPFE_BASE (0x18000000)
117 #define MPFE_SIZE (0x04000000)
118
119 //16MB CCU
120 #define CCU_BASE (0x1C000000)
121 #define CCU_SIZE (0x01000000)
122
123 //1MB GIC
124 #define GIC_BASE (0x1D000000)
125 #define GIC_SIZE (0x00100000)
126
127 #define BL2_BASE (0x00000000)
128 #define BL2_LIMIT (0x0007E000)
129
130 #define BL31_BASE (0x80000000)
131 #define BL31_LIMIT (0x82000000)
132 /*******************************************************************************
133 * UART related constants
134 ******************************************************************************/
135 #define PLAT_UART0_BASE (0x10C02000)
136 #define PLAT_UART1_BASE (0x10C02100)
137
138 /*******************************************************************************
139 * WDT related constants
140 ******************************************************************************/
141 #define WDT_BASE (0x10D00200)
142
143 /*******************************************************************************
144 * GIC related constants
145 ******************************************************************************/
146 #define PLAT_GIC_BASE (0x1D000000)
147 #define PLAT_GICC_BASE (PLAT_GIC_BASE + 0x20000)
148 #define PLAT_GICD_BASE (PLAT_GIC_BASE + 0x00000)
149 #define PLAT_GICR_BASE (PLAT_GIC_BASE + 0x60000)
150
151 #define PLAT_INTEL_SOCFPGA_GICR_BASE PLAT_GICR_BASE
152
153 /*******************************************************************************
154 * SDMMC related pointer function
155 ******************************************************************************/
156 #define SDMMC_READ_BLOCKS sdmmc_read_blocks
157 #define SDMMC_WRITE_BLOCKS sdmmc_write_blocks
158
159 /*******************************************************************************
160 * sysmgr.boot_scratch_cold6 & 7 (64bit) are used to indicate L2 reset
161 * is done and HPS should trigger warm reset via RMR_EL3.
162 ******************************************************************************/
163 #define L2_RESET_DONE_REG 0x10D12218
164
165 #endif /* PLAT_SOCFPGA_DEF_H */