| 1 |
/* |
| 2 |
* Copyright 2021-2024 NXP |
| 3 |
* |
| 4 |
* SPDX-License-Identifier: BSD-3-Clause |
| 5 |
*/ |
| 6 |
|
| 7 |
#include <assert.h> |
| 8 |
#include <stdbool.h> |
| 9 |
|
| 10 |
#include <drivers/delay_timer.h> |
| 11 |
#include <lib/mmio.h> |
| 12 |
|
| 13 |
#include <plat_imx8.h> |
| 14 |
#include <xrdc.h> |
| 15 |
|
| 16 |
#define PCC_PR BIT(31) |
| 17 |
#define PFD_VALID_MASK U(0x40404040) |
| 18 |
|
| 19 |
#define S400_MU_BASE U(0x27020000) |
| 20 |
#define S400_MU_RSR (S400_MU_BASE + 0x12c) |
| 21 |
#define S400_MU_TRx(i) (S400_MU_BASE + 0x200 + (i) * 4) |
| 22 |
#define S400_MU_RRx(i) (S400_MU_BASE + 0x280 + (i) * 4) |
| 23 |
|
| 24 |
/* |
| 25 |
* need to re-init the PLL, CGC1, PCC, CMC, XRDC, SIM, GPIO etc. |
| 26 |
* init the PLL &PFD first, then switch the CA35 clock to PLL for |
| 27 |
* performance consideration, restore other bus fabric clock. |
| 28 |
*/ |
| 29 |
|
| 30 |
extern void imx8ulp_caam_init(void); |
| 31 |
extern void upower_wait_resp(void); |
| 32 |
extern void dram_enter_retention(void); |
| 33 |
extern void dram_exit_retention(void); |
| 34 |
|
| 35 |
struct plat_gic_ctx imx_gicv3_ctx; |
| 36 |
static uint32_t cmc1_pmprot; |
| 37 |
static uint32_t cmc1_srie; |
| 38 |
|
| 39 |
/* TPM5: global timer */ |
| 40 |
static uint32_t tpm5[3]; |
| 41 |
|
| 42 |
static uint32_t wdog3[2]; |
| 43 |
|
| 44 |
/* CGC1 PLL2 */ |
| 45 |
uint32_t pll2[][2] = { |
| 46 |
{0x292c0510, 0x0}, {0x292c0518, 0x0}, {0x292c051c, 0x0}, |
| 47 |
{0x292c0520, 0x0}, {0x292c0500, 0x0}, |
| 48 |
}; |
| 49 |
|
| 50 |
/* CGC1 PLL3 */ |
| 51 |
uint32_t pll3[][2] = { |
| 52 |
{0x292c0604, 0x0}, {0x292c0608, 0x0}, {0x292c060c, 0x0}, |
| 53 |
{0x292c0610, 0x0}, {0x292c0618, 0x0}, {0x292c061c, 0x0}, |
| 54 |
{0x292c0620, 0x0}, {0x292c0624, 0x0}, {0x292c0600, 0x0}, |
| 55 |
{0x292c0614, 0x0}, |
| 56 |
}; |
| 57 |
|
| 58 |
/* CGC1 others */ |
| 59 |
uint32_t cgc1[][2] = { |
| 60 |
{0x292c0014, 0x0}, {0x292c0034, 0x0}, {0x292c0038, 0x0}, |
| 61 |
{0x292c0108, 0x0}, {0x292c0208, 0x0}, {0x292c0700, 0x0}, |
| 62 |
{0x292c0810, 0x0}, {0x292c0900, 0x0}, {0x292c0904, 0x0}, |
| 63 |
{0x292c0908, 0x0}, {0x292c090c, 0x0}, {0x292c0a00, 0x0}, |
| 64 |
}; |
| 65 |
|
| 66 |
static uint32_t pcc3[61]; |
| 67 |
static uint32_t pcc4[32]; |
| 68 |
|
| 69 |
static uint32_t pcc5_0[33]; |
| 70 |
static uint32_t pcc5_1[][2] = { |
| 71 |
{0x2da70084, 0x0}, {0x2da70088, 0x0}, {0x2da7008c, 0x0}, |
| 72 |
{0x2da700a0, 0x0}, {0x2da700a4, 0x0}, {0x2da700a8, 0x0}, |
| 73 |
{0x2da700ac, 0x0}, {0x2da700b0, 0x0}, {0x2da700b4, 0x0}, |
| 74 |
{0x2da700bc, 0x0}, {0x2da700c0, 0x0}, {0x2da700c8, 0x0}, |
| 75 |
{0x2da700cc, 0x0}, {0x2da700d0, 0x0}, {0x2da700f0, 0x0}, |
| 76 |
{0x2da700f4, 0x0}, {0x2da700f8, 0x0}, {0x2da70108, 0x0}, |
| 77 |
{0x2da7010c, 0x0}, {0x2da70110, 0x0}, {0x2da70114, 0x0}, |
| 78 |
}; |
| 79 |
|
| 80 |
static uint32_t cgc2[][2] = { |
| 81 |
{0x2da60014, 0x0}, {0x2da60020, 0x0}, {0x2da6003c, 0x0}, |
| 82 |
{0x2da60040, 0x0}, {0x2da60108, 0x0}, {0x2da60208, 0x0}, |
| 83 |
{0x2da60900, 0x0}, {0x2da60904, 0x0}, {0x2da60908, 0x0}, |
| 84 |
{0x2da60910, 0x0}, {0x2da60a00, 0x0}, |
| 85 |
}; |
| 86 |
|
| 87 |
static uint32_t pll4[][2] = { |
| 88 |
{0x2da60604, 0x0}, {0x2da60608, 0x0}, {0x2da6060c, 0x0}, |
| 89 |
{0x2da60610, 0x0}, {0x2da60618, 0x0}, {0x2da6061c, 0x0}, |
| 90 |
{0x2da60620, 0x0}, {0x2da60624, 0x0}, {0x2da60600, 0x0}, |
| 91 |
{0x2da60614, 0x0}, |
| 92 |
}; |
| 93 |
|
| 94 |
static uint32_t lpav_sim[][2] = { |
| 95 |
{0x2da50000, 0x0}, {0x2da50004, 0x0}, {0x2da50008, 0x0}, |
| 96 |
{0x2da5001c, 0x0}, {0x2da50020, 0x0}, {0x2da50024, 0x0}, |
| 97 |
{0x2da50034, 0x0}, |
| 98 |
}; |
| 99 |
|
| 100 |
#define APD_GPIO_CTRL_NUM 2 |
| 101 |
#define LPAV_GPIO_CTRL_NUM 1 |
| 102 |
#define GPIO_CTRL_REG_NUM 8 |
| 103 |
#define GPIO_PIN_MAX_NUM 32 |
| 104 |
#define GPIO_CTX(addr, num) \ |
| 105 |
{.base = (addr), .pin_num = (num), } |
| 106 |
|
| 107 |
struct gpio_ctx { |
| 108 |
/* gpio base */ |
| 109 |
uintptr_t base; |
| 110 |
/* port control */ |
| 111 |
uint32_t port_ctrl[GPIO_CTRL_REG_NUM]; |
| 112 |
/* GPIO ICR, Max 32 */ |
| 113 |
uint32_t pin_num; |
| 114 |
uint32_t gpio_icr[GPIO_PIN_MAX_NUM]; |
| 115 |
}; |
| 116 |
|
| 117 |
static uint32_t gpio_ctrl_offset[GPIO_CTRL_REG_NUM] = { |
| 118 |
0xc, 0x10, 0x14, 0x18, 0x1c, 0x40, 0x54, 0x58 |
| 119 |
}; |
| 120 |
static struct gpio_ctx apd_gpio_ctx[APD_GPIO_CTRL_NUM] = { |
| 121 |
GPIO_CTX(IMX_GPIOE_BASE, 24), |
| 122 |
GPIO_CTX(IMX_GPIOF_BASE, 32), |
| 123 |
}; |
| 124 |
|
| 125 |
static struct gpio_ctx lpav_gpio_ctx = GPIO_CTX(IMX_GPIOD_BASE, 24); |
| 126 |
/* iomuxc setting */ |
| 127 |
#define IOMUXC_SECTION_NUM 8 |
| 128 |
struct iomuxc_section { |
| 129 |
uint32_t offset; |
| 130 |
uint32_t reg_num; |
| 131 |
}; |
| 132 |
|
| 133 |
struct iomuxc_section iomuxc_sections[IOMUXC_SECTION_NUM] = { |
| 134 |
{.offset = IOMUXC_PTD_PCR_BASE, .reg_num = 24}, |
| 135 |
{.offset = IOMUXC_PTE_PCR_BASE, .reg_num = 24}, |
| 136 |
{.offset = IOMUXC_PTF_PCR_BASE, .reg_num = 32}, |
| 137 |
{.offset = IOMUXC_PSMI_BASE0, .reg_num = 10}, |
| 138 |
{.offset = IOMUXC_PSMI_BASE1, .reg_num = 61}, |
| 139 |
{.offset = IOMUXC_PSMI_BASE2, .reg_num = 12}, |
| 140 |
{.offset = IOMUXC_PSMI_BASE3, .reg_num = 20}, |
| 141 |
{.offset = IOMUXC_PSMI_BASE4, .reg_num = 75}, |
| 142 |
}; |
| 143 |
static uint32_t iomuxc_ctx[258]; |
| 144 |
|
| 145 |
#define PORTS_NUM 3U |
| 146 |
void apd_io_pad_off(void) |
| 147 |
{ |
| 148 |
unsigned int i, j; |
| 149 |
|
| 150 |
/* off the PTD/E/F, need to be customized based on actual user case */ |
| 151 |
for (i = 0; i < PORTS_NUM; i++) { |
| 152 |
for (j = 0; j < iomuxc_sections[i].reg_num; j++) { |
| 153 |
mmio_write_32(iomuxc_sections[i].offset + j * 4, 0); |
| 154 |
} |
| 155 |
} |
| 156 |
|
| 157 |
/* disable the PTD compensation */ |
| 158 |
mmio_write_32(IMX_SIM1_BASE + 0x48, 0x800); |
| 159 |
} |
| 160 |
|
| 161 |
void iomuxc_save(void) |
| 162 |
{ |
| 163 |
unsigned int i, j; |
| 164 |
unsigned int index = 0U; |
| 165 |
|
| 166 |
for (i = 0U; i < IOMUXC_SECTION_NUM; i++) { |
| 167 |
for (j = 0U; j < iomuxc_sections[i].reg_num; j++) { |
| 168 |
iomuxc_ctx[index++] = mmio_read_32(iomuxc_sections[i].offset + j * 4); |
| 169 |
} |
| 170 |
} |
| 171 |
|
| 172 |
apd_io_pad_off(); |
| 173 |
} |
| 174 |
|
| 175 |
void iomuxc_restore(void) |
| 176 |
{ |
| 177 |
unsigned int i, j; |
| 178 |
unsigned int index = 0U; |
| 179 |
|
| 180 |
for (i = 0U; i < IOMUXC_SECTION_NUM; i++) { |
| 181 |
for (j = 0U; j < iomuxc_sections[i].reg_num; j++) { |
| 182 |
mmio_write_32(iomuxc_sections[i].offset + j * 4, iomuxc_ctx[index++]); |
| 183 |
} |
| 184 |
} |
| 185 |
} |
| 186 |
|
| 187 |
void gpio_save(struct gpio_ctx *ctx, int port_num) |
| 188 |
{ |
| 189 |
unsigned int i, j; |
| 190 |
|
| 191 |
for (i = 0U; i < port_num; i++) { |
| 192 |
/* save the port control setting */ |
| 193 |
for (j = 0U; j < GPIO_CTRL_REG_NUM; j++) { |
| 194 |
if (j < 4U) { |
| 195 |
ctx->port_ctrl[j] = mmio_read_32(ctx->base + gpio_ctrl_offset[j]); |
| 196 |
/* |
| 197 |
* clear the permission setting to read the GPIO |
| 198 |
* non-secure world setting. |
| 199 |
*/ |
| 200 |
mmio_write_32(ctx->base + gpio_ctrl_offset[j], 0x0); |
| 201 |
} else { |
| 202 |
ctx->port_ctrl[j] = mmio_read_32(ctx->base + gpio_ctrl_offset[j]); |
| 203 |
} |
| 204 |
} |
| 205 |
/* save the gpio icr setting */ |
| 206 |
for (j = 0U; j < ctx->pin_num; j++) { |
| 207 |
ctx->gpio_icr[j] = mmio_read_32(ctx->base + 0x80 + j * 4); |
| 208 |
} |
| 209 |
|
| 210 |
ctx++; |
| 211 |
} |
| 212 |
} |
| 213 |
|
| 214 |
void gpio_restore(struct gpio_ctx *ctx, int port_num) |
| 215 |
{ |
| 216 |
unsigned int i, j; |
| 217 |
|
| 218 |
for (i = 0U; i < port_num; i++) { |
| 219 |
for (j = 0U; j < ctx->pin_num; j++) |
| 220 |
mmio_write_32(ctx->base + 0x80 + j * 4, ctx->gpio_icr[j]); |
| 221 |
|
| 222 |
for (j = 4U; j < GPIO_CTRL_REG_NUM; j++) { |
| 223 |
mmio_write_32(ctx->base + gpio_ctrl_offset[j], ctx->port_ctrl[j]); |
| 224 |
} |
| 225 |
|
| 226 |
/* permission config retore last */ |
| 227 |
for (j = 0U; j < 4; j++) { |
| 228 |
mmio_write_32(ctx->base + gpio_ctrl_offset[j], ctx->port_ctrl[j]); |
| 229 |
} |
| 230 |
|
| 231 |
ctx++; |
| 232 |
} |
| 233 |
} |
| 234 |
|
| 235 |
void cgc1_save(void) |
| 236 |
{ |
| 237 |
unsigned int i; |
| 238 |
|
| 239 |
/* PLL2 */ |
| 240 |
for (i = 0U; i < ARRAY_SIZE(pll2); i++) { |
| 241 |
pll2[i][1] = mmio_read_32(pll2[i][0]); |
| 242 |
} |
| 243 |
|
| 244 |
/* PLL3 */ |
| 245 |
for (i = 0U; i < ARRAY_SIZE(pll3); i++) { |
| 246 |
pll3[i][1] = mmio_read_32(pll3[i][0]); |
| 247 |
} |
| 248 |
|
| 249 |
/* CGC1 others */ |
| 250 |
for (i = 0U; i < ARRAY_SIZE(cgc1); i++) { |
| 251 |
cgc1[i][1] = mmio_read_32(cgc1[i][0]); |
| 252 |
} |
| 253 |
} |
| 254 |
|
| 255 |
void cgc1_restore(void) |
| 256 |
{ |
| 257 |
unsigned int i; |
| 258 |
|
| 259 |
/* PLL2 */ |
| 260 |
for (i = 0U; i < ARRAY_SIZE(pll2); i++) { |
| 261 |
mmio_write_32(pll2[i][0], pll2[i][1]); |
| 262 |
} |
| 263 |
/* wait for PLL2 lock */ |
| 264 |
while (!(mmio_read_32(pll2[4][0]) & BIT(24))) { |
| 265 |
; |
| 266 |
} |
| 267 |
|
| 268 |
/* PLL3 */ |
| 269 |
for (i = 0U; i < 9U; i++) { |
| 270 |
mmio_write_32(pll3[i][0], pll3[i][1]); |
| 271 |
} |
| 272 |
|
| 273 |
/* wait for PLL3 lock */ |
| 274 |
while (!(mmio_read_32(pll3[4][0]) & BIT(24))) { |
| 275 |
; |
| 276 |
} |
| 277 |
|
| 278 |
/* restore the PFDs */ |
| 279 |
mmio_write_32(pll3[9][0], pll3[9][1] & ~(BIT(31) | BIT(23) | BIT(15) | BIT(7))); |
| 280 |
mmio_write_32(pll3[9][0], pll3[9][1]); |
| 281 |
|
| 282 |
/* wait for the PFD is stable, only need to check the enabled PFDs */ |
| 283 |
while (!(mmio_read_32(pll3[9][0]) & PFD_VALID_MASK)) { |
| 284 |
; |
| 285 |
} |
| 286 |
|
| 287 |
/* CGC1 others */ |
| 288 |
for (i = 0U; i < ARRAY_SIZE(cgc1); i++) { |
| 289 |
mmio_write_32(cgc1[i][0], cgc1[i][1]); |
| 290 |
} |
| 291 |
} |
| 292 |
|
| 293 |
void tpm5_save(void) |
| 294 |
{ |
| 295 |
tpm5[0] = mmio_read_32(IMX_TPM5_BASE + 0x10); |
| 296 |
tpm5[1] = mmio_read_32(IMX_TPM5_BASE + 0x18); |
| 297 |
tpm5[2] = mmio_read_32(IMX_TPM5_BASE + 0x20); |
| 298 |
} |
| 299 |
|
| 300 |
void tpm5_restore(void) |
| 301 |
{ |
| 302 |
mmio_write_32(IMX_TPM5_BASE + 0x10, tpm5[0]); |
| 303 |
mmio_write_32(IMX_TPM5_BASE + 0x18, tpm5[1]); |
| 304 |
mmio_write_32(IMX_TPM5_BASE + 0x20, tpm5[2]); |
| 305 |
} |
| 306 |
|
| 307 |
void wdog3_save(void) |
| 308 |
{ |
| 309 |
/* enable wdog3 clock */ |
| 310 |
mmio_write_32(IMX_PCC3_BASE + 0xa8, 0xd2800000); |
| 311 |
|
| 312 |
/* save the CS & TOVAL regiter */ |
| 313 |
wdog3[0] = mmio_read_32(IMX_WDOG3_BASE); |
| 314 |
wdog3[1] = mmio_read_32(IMX_WDOG3_BASE + 0x8); |
| 315 |
} |
| 316 |
|
| 317 |
void wdog3_restore(void) |
| 318 |
{ |
| 319 |
/* enable wdog3 clock */ |
| 320 |
mmio_write_32(IMX_PCC3_BASE + 0xa8, 0xd2800000); |
| 321 |
|
| 322 |
/* reconfig the CS */ |
| 323 |
mmio_write_32(IMX_WDOG3_BASE, wdog3[0]); |
| 324 |
/* set the tiemout value */ |
| 325 |
mmio_write_32(IMX_WDOG3_BASE + 0x8, wdog3[1]); |
| 326 |
|
| 327 |
/* wait for the lock status */ |
| 328 |
while ((mmio_read_32(IMX_WDOG3_BASE) & BIT(11))) { |
| 329 |
; |
| 330 |
} |
| 331 |
|
| 332 |
/* wait for the config done */ |
| 333 |
while (!(mmio_read_32(IMX_WDOG3_BASE) & BIT(10))) { |
| 334 |
; |
| 335 |
} |
| 336 |
} |
| 337 |
|
| 338 |
static uint32_t lpuart_regs[4]; |
| 339 |
#define LPUART_BAUD 0x10 |
| 340 |
#define LPUART_CTRL 0x18 |
| 341 |
#define LPUART_FIFO 0x28 |
| 342 |
#define LPUART_WATER 0x2c |
| 343 |
|
| 344 |
void lpuart_save(void) |
| 345 |
{ |
| 346 |
lpuart_regs[0] = mmio_read_32(IMX_LPUART5_BASE + LPUART_BAUD); |
| 347 |
lpuart_regs[1] = mmio_read_32(IMX_LPUART5_BASE + LPUART_FIFO); |
| 348 |
lpuart_regs[2] = mmio_read_32(IMX_LPUART5_BASE + LPUART_WATER); |
| 349 |
lpuart_regs[3] = mmio_read_32(IMX_LPUART5_BASE + LPUART_CTRL); |
| 350 |
} |
| 351 |
|
| 352 |
void lpuart_restore(void) |
| 353 |
{ |
| 354 |
mmio_write_32(IMX_LPUART5_BASE + LPUART_BAUD, lpuart_regs[0]); |
| 355 |
mmio_write_32(IMX_LPUART5_BASE + LPUART_FIFO, lpuart_regs[1]); |
| 356 |
mmio_write_32(IMX_LPUART5_BASE + LPUART_WATER, lpuart_regs[2]); |
| 357 |
mmio_write_32(IMX_LPUART5_BASE + LPUART_CTRL, lpuart_regs[3]); |
| 358 |
} |
| 359 |
|
| 360 |
bool is_lpav_owned_by_apd(void) |
| 361 |
{ |
| 362 |
return (mmio_read_32(0x2802b044) & BIT(7)) ? true : false; |
| 363 |
} |
| 364 |
|
| 365 |
void lpav_ctx_save(void) |
| 366 |
{ |
| 367 |
unsigned int i; |
| 368 |
uint32_t val; |
| 369 |
|
| 370 |
/* CGC2 save */ |
| 371 |
for (i = 0U; i < ARRAY_SIZE(cgc2); i++) { |
| 372 |
cgc2[i][1] = mmio_read_32(cgc2[i][0]); |
| 373 |
} |
| 374 |
|
| 375 |
/* PLL4 */ |
| 376 |
for (i = 0U; i < ARRAY_SIZE(pll4); i++) { |
| 377 |
pll4[i][1] = mmio_read_32(pll4[i][0]); |
| 378 |
} |
| 379 |
|
| 380 |
/* PCC5 save */ |
| 381 |
for (i = 0U; i < ARRAY_SIZE(pcc5_0); i++) { |
| 382 |
val = mmio_read_32(IMX_PCC5_BASE + i * 4); |
| 383 |
if (val & PCC_PR) { |
| 384 |
pcc5_0[i] = val; |
| 385 |
} |
| 386 |
} |
| 387 |
|
| 388 |
for (i = 0U; i < ARRAY_SIZE(pcc5_1); i++) { |
| 389 |
val = mmio_read_32(pcc5_1[i][0]); |
| 390 |
if (val & PCC_PR) { |
| 391 |
pcc5_1[i][1] = val; |
| 392 |
} |
| 393 |
} |
| 394 |
|
| 395 |
/* LPAV SIM save */ |
| 396 |
for (i = 0U; i < ARRAY_SIZE(lpav_sim); i++) { |
| 397 |
lpav_sim[i][1] = mmio_read_32(lpav_sim[i][0]); |
| 398 |
} |
| 399 |
|
| 400 |
/* Save GPIO port D */ |
| 401 |
gpio_save(&lpav_gpio_ctx, LPAV_GPIO_CTRL_NUM); |
| 402 |
|
| 403 |
/* put DDR into retention */ |
| 404 |
dram_enter_retention(); |
| 405 |
} |
| 406 |
|
| 407 |
void lpav_ctx_restore(void) |
| 408 |
{ |
| 409 |
unsigned int i; |
| 410 |
|
| 411 |
/* PLL4 */ |
| 412 |
for (i = 0U; i < 9U; i++) { |
| 413 |
mmio_write_32(pll4[i][0], pll4[i][1]); |
| 414 |
} |
| 415 |
|
| 416 |
/* wait for PLL4 lock */ |
| 417 |
while (!(mmio_read_32(pll4[8][0]) & BIT(24))) { |
| 418 |
; |
| 419 |
} |
| 420 |
|
| 421 |
/* restore the PLL4 PFDs */ |
| 422 |
mmio_write_32(pll4[9][0], pll4[9][1] & ~(BIT(31) | BIT(23) | BIT(15) | BIT(7))); |
| 423 |
mmio_write_32(pll4[9][0], pll4[9][1]); |
| 424 |
|
| 425 |
/* wait for the PFD is stable */ |
| 426 |
while (!(mmio_read_32(pll4[9][0]) & PFD_VALID_MASK)) { |
| 427 |
; |
| 428 |
} |
| 429 |
|
| 430 |
/* CGC2 restore */ |
| 431 |
for (i = 0U; i < ARRAY_SIZE(cgc2); i++) { |
| 432 |
mmio_write_32(cgc2[i][0], cgc2[i][1]); |
| 433 |
} |
| 434 |
|
| 435 |
/* PCC5 restore */ |
| 436 |
for (i = 0U; i < ARRAY_SIZE(pcc5_0); i++) { |
| 437 |
if (pcc5_0[i] & PCC_PR) { |
| 438 |
mmio_write_32(IMX_PCC5_BASE + i * 4, pcc5_0[i]); |
| 439 |
} |
| 440 |
} |
| 441 |
|
| 442 |
for (i = 0U; i < ARRAY_SIZE(pcc5_1); i++) { |
| 443 |
if (pcc5_1[i][1] & PCC_PR) { |
| 444 |
mmio_write_32(pcc5_1[i][0], pcc5_1[i][1]); |
| 445 |
} |
| 446 |
} |
| 447 |
|
| 448 |
/* LPAV_SIM */ |
| 449 |
for (i = 0U; i < ARRAY_SIZE(lpav_sim); i++) { |
| 450 |
mmio_write_32(lpav_sim[i][0], lpav_sim[i][1]); |
| 451 |
} |
| 452 |
|
| 453 |
gpio_restore(&lpav_gpio_ctx, LPAV_GPIO_CTRL_NUM); |
| 454 |
/* DDR retention exit */ |
| 455 |
dram_exit_retention(); |
| 456 |
} |
| 457 |
|
| 458 |
void imx_apd_ctx_save(unsigned int proc_num) |
| 459 |
{ |
| 460 |
unsigned int i; |
| 461 |
uint32_t val; |
| 462 |
|
| 463 |
/* enable LPUART5's clock by default */ |
| 464 |
mmio_setbits_32(IMX_PCC3_BASE + 0xe8, BIT(30)); |
| 465 |
|
| 466 |
/* save the gic config */ |
| 467 |
plat_gic_save(proc_num, &imx_gicv3_ctx); |
| 468 |
|
| 469 |
cmc1_pmprot = mmio_read_32(IMX_CMC1_BASE + 0x18); |
| 470 |
cmc1_srie = mmio_read_32(IMX_CMC1_BASE + 0x8c); |
| 471 |
|
| 472 |
/* save the PCC3 */ |
| 473 |
for (i = 0U; i < ARRAY_SIZE(pcc3); i++) { |
| 474 |
/* save the pcc if it is exist */ |
| 475 |
val = mmio_read_32(IMX_PCC3_BASE + i * 4); |
| 476 |
if (val & PCC_PR) { |
| 477 |
pcc3[i] = val; |
| 478 |
} |
| 479 |
} |
| 480 |
|
| 481 |
/* save the PCC4 */ |
| 482 |
for (i = 0U; i < ARRAY_SIZE(pcc4); i++) { |
| 483 |
/* save the pcc if it is exist */ |
| 484 |
val = mmio_read_32(IMX_PCC4_BASE + i * 4); |
| 485 |
if (val & PCC_PR) { |
| 486 |
pcc4[i] = val; |
| 487 |
} |
| 488 |
} |
| 489 |
|
| 490 |
/* save the CGC1 */ |
| 491 |
cgc1_save(); |
| 492 |
|
| 493 |
wdog3_save(); |
| 494 |
|
| 495 |
gpio_save(apd_gpio_ctx, APD_GPIO_CTRL_NUM); |
| 496 |
|
| 497 |
iomuxc_save(); |
| 498 |
|
| 499 |
tpm5_save(); |
| 500 |
|
| 501 |
lpuart_save(); |
| 502 |
|
| 503 |
/* |
| 504 |
* save the lpav ctx & put the ddr into retention |
| 505 |
* if lpav master is assigned to APD domain. |
| 506 |
*/ |
| 507 |
if (is_lpav_owned_by_apd()) { |
| 508 |
lpav_ctx_save(); |
| 509 |
} |
| 510 |
} |
| 511 |
|
| 512 |
void xrdc_reinit(void) |
| 513 |
{ |
| 514 |
xrdc_apply_apd_config(); |
| 515 |
xrdc_apply_lpav_config(); |
| 516 |
|
| 517 |
xrdc_enable(); |
| 518 |
} |
| 519 |
|
| 520 |
void s400_release_caam(void) |
| 521 |
{ |
| 522 |
uint32_t msg, resp; |
| 523 |
|
| 524 |
mmio_write_32(S400_MU_TRx(0), 0x17d70206); |
| 525 |
mmio_write_32(S400_MU_TRx(1), 0x7); |
| 526 |
|
| 527 |
do { |
| 528 |
resp = mmio_read_32(S400_MU_RSR); |
| 529 |
} while ((resp & 0x3) != 0x3); |
| 530 |
|
| 531 |
msg = mmio_read_32(S400_MU_RRx(0)); |
| 532 |
resp = mmio_read_32(S400_MU_RRx(1)); |
| 533 |
|
| 534 |
VERBOSE("resp %x; %x", msg, resp); |
| 535 |
} |
| 536 |
|
| 537 |
void imx_apd_ctx_restore(unsigned int proc_num) |
| 538 |
{ |
| 539 |
unsigned int i; |
| 540 |
|
| 541 |
/* restore the CCG1 */ |
| 542 |
cgc1_restore(); |
| 543 |
|
| 544 |
for (i = 0U; i < ARRAY_SIZE(pcc3); i++) { |
| 545 |
/* save the pcc if it is exist */ |
| 546 |
if (pcc3[i] & PCC_PR) { |
| 547 |
mmio_write_32(IMX_PCC3_BASE + i * 4, pcc3[i]); |
| 548 |
} |
| 549 |
} |
| 550 |
|
| 551 |
for (i = 0U; i < ARRAY_SIZE(pcc4); i++) { |
| 552 |
if (pcc4[i] & PCC_PR) { |
| 553 |
mmio_write_32(IMX_PCC4_BASE + i * 4, pcc4[i]); |
| 554 |
} |
| 555 |
} |
| 556 |
|
| 557 |
wdog3_restore(); |
| 558 |
|
| 559 |
iomuxc_restore(); |
| 560 |
|
| 561 |
tpm5_restore(); |
| 562 |
|
| 563 |
xrdc_reinit(); |
| 564 |
|
| 565 |
/* Restore GPIO after xrdc_reinit, otherwise MSCs are invalid */ |
| 566 |
gpio_restore(apd_gpio_ctx, APD_GPIO_CTRL_NUM); |
| 567 |
|
| 568 |
/* restore the gic config */ |
| 569 |
plat_gic_restore(proc_num, &imx_gicv3_ctx); |
| 570 |
|
| 571 |
mmio_write_32(IMX_CMC1_BASE + 0x18, cmc1_pmprot); |
| 572 |
mmio_write_32(IMX_CMC1_BASE + 0x8c, cmc1_srie); |
| 573 |
|
| 574 |
/* enable LPUART5's clock by default */ |
| 575 |
mmio_setbits_32(IMX_PCC3_BASE + 0xe8, BIT(30)); |
| 576 |
|
| 577 |
/* restore the console lpuart */ |
| 578 |
lpuart_restore(); |
| 579 |
|
| 580 |
/* FIXME: make uart work for ATF */ |
| 581 |
mmio_write_32(IMX_LPUART_BASE + 0x18, 0xc0000); |
| 582 |
|
| 583 |
/* Allow M core to reset A core */ |
| 584 |
mmio_clrbits_32(IMX_MU0B_BASE + 0x10, BIT(2)); |
| 585 |
/* |
| 586 |
* Ask S400 to release caam to APD as it is owned by s400 |
| 587 |
*/ |
| 588 |
s400_release_caam(); |
| 589 |
|
| 590 |
/* re-init the caam */ |
| 591 |
imx8ulp_caam_init(); |
| 592 |
|
| 593 |
/* |
| 594 |
* ack the upower, seems a necessary steps, otherwise the upower can |
| 595 |
* not response to the new API service call. put this just before the |
| 596 |
* ddr retention exit because that the dram retention exit flow need to |
| 597 |
* communicate with upower. |
| 598 |
*/ |
| 599 |
upower_wait_resp(); |
| 600 |
|
| 601 |
/* |
| 602 |
* restore the lpav ctx & make ddr out of retention |
| 603 |
* if lpav master is assigned to APD domain. |
| 604 |
*/ |
| 605 |
if (is_lpav_owned_by_apd()) { |
| 606 |
lpav_ctx_restore(); |
| 607 |
} |
| 608 |
} |
| 609 |
|
| 610 |
#define DGO_CTRL1 U(0xc) |
| 611 |
#define USB_WAKEUP U(0x44) |
| 612 |
#define USB1_PHY_DPD_WAKEUP_EN BIT_32(5) |
| 613 |
#define USB0_PHY_DPD_WAKEUP_EN BIT_32(4) |
| 614 |
#define USB1_PHY_WAKEUP_ISO_DISABLE BIT_32(1) |
| 615 |
#define USB0_PHY_WAKEUP_ISO_DISABLE BIT_32(0) |
| 616 |
|
| 617 |
void usb_wakeup_enable(bool enable) |
| 618 |
{ |
| 619 |
if (enable) { |
| 620 |
mmio_setbits_32(IMX_SIM1_BASE + USB_WAKEUP, |
| 621 |
USB1_PHY_WAKEUP_ISO_DISABLE | USB0_PHY_WAKEUP_ISO_DISABLE); |
| 622 |
mmio_setbits_32(IMX_SIM1_BASE + DGO_CTRL1, BIT(0)); |
| 623 |
while (!(mmio_read_32(IMX_SIM1_BASE + DGO_CTRL1) & BIT(1))) { |
| 624 |
; |
| 625 |
} |
| 626 |
|
| 627 |
mmio_clrbits_32(IMX_SIM1_BASE + DGO_CTRL1, BIT(0)); |
| 628 |
mmio_write_32(IMX_SIM1_BASE + DGO_CTRL1, BIT(1)); |
| 629 |
|
| 630 |
/* Need to delay for a while to make sure the wakeup logic can work */ |
| 631 |
udelay(500); |
| 632 |
|
| 633 |
mmio_setbits_32(IMX_SIM1_BASE + USB_WAKEUP, |
| 634 |
USB1_PHY_DPD_WAKEUP_EN | USB0_PHY_DPD_WAKEUP_EN); |
| 635 |
mmio_setbits_32(IMX_SIM1_BASE + DGO_CTRL1, BIT(0)); |
| 636 |
while (!(mmio_read_32(IMX_SIM1_BASE + DGO_CTRL1) & BIT(1))) { |
| 637 |
; |
| 638 |
} |
| 639 |
|
| 640 |
mmio_clrbits_32(IMX_SIM1_BASE + DGO_CTRL1, BIT(0)); |
| 641 |
mmio_write_32(IMX_SIM1_BASE + DGO_CTRL1, BIT(1)); |
| 642 |
} else { |
| 643 |
/* |
| 644 |
* USBx_PHY_DPD_WAKEUP_EN should be cleared before USB0_PHY_WAKEUP_ISO_DISABLE |
| 645 |
* to provide the correct the wake-up functionality. |
| 646 |
*/ |
| 647 |
mmio_write_32(IMX_SIM1_BASE + USB_WAKEUP, USB1_PHY_WAKEUP_ISO_DISABLE | |
| 648 |
USB0_PHY_WAKEUP_ISO_DISABLE); |
| 649 |
mmio_write_32(IMX_SIM1_BASE + DGO_CTRL1, BIT(0)); |
| 650 |
while (!(mmio_read_32(IMX_SIM1_BASE + DGO_CTRL1) & BIT(1))) { |
| 651 |
; |
| 652 |
} |
| 653 |
|
| 654 |
mmio_clrbits_32(IMX_SIM1_BASE + DGO_CTRL1, BIT(0)); |
| 655 |
mmio_write_32(IMX_SIM1_BASE + DGO_CTRL1, BIT(1)); |
| 656 |
} |
| 657 |
} |