Debian Codegraph @

plat/imx/imx8m/imx8mm/imx8mm_bl31_setup.c

raw
1 /*
2 * Copyright (c) 2019-2022 ARM Limited and Contributors. All rights reserved.
3 *
4 * SPDX-License-Identifier: BSD-3-Clause
5 */
6
7 #include <assert.h>
8 #include <stdbool.h>
9
10 #include <platform_def.h>
11
12 #include <arch_helpers.h>
13 #include <common/bl_common.h>
14 #include <common/debug.h>
15 #include <context.h>
16 #include <drivers/arm/tzc380.h>
17 #include <drivers/console.h>
18 #include <drivers/generic_delay_timer.h>
19 #include <lib/el3_runtime/context_mgmt.h>
20 #include <lib/mmio.h>
21 #include <lib/xlat_tables/xlat_tables_v2.h>
22 #include <plat/common/platform.h>
23
24 #include <dram.h>
25 #include <gpc.h>
26 #include <imx_aipstz.h>
27 #include <imx_uart.h>
28 #include <imx_rdc.h>
29 #include <imx8m_caam.h>
30 #include <imx8m_ccm.h>
31 #include <imx8m_csu.h>
32 #include <imx8m_snvs.h>
33 #include <plat_common.h>
34 #include <plat_imx8.h>
35
36 #define TRUSTY_PARAMS_LEN_BYTES (4096*2)
37
38 /*
39 * Note: DRAM region is mapped with entire size available and uses MT_RW
40 * attributes.
41 * See details in docs/plat/imx8m.rst "High Assurance Boot (HABv4)" section
42 * for explanation of this mapping scheme.
43 */
44 static const mmap_region_t imx_mmap[] = {
45 MAP_REGION_FLAT(IMX_GIC_BASE, IMX_GIC_SIZE, MT_DEVICE | MT_RW),
46 MAP_REGION_FLAT(IMX_AIPS_BASE, IMX_AIPS_SIZE, MT_DEVICE | MT_RW), /* AIPS map */
47 MAP_REGION_FLAT(OCRAM_S_BASE, OCRAM_S_SIZE, MT_DEVICE | MT_RW), /* OCRAM_S */
48 MAP_REGION_FLAT(IMX_DDRPHY_BASE, IMX_DDR_IPS_SIZE, MT_DEVICE | MT_RW), /* DDRMIX */
49 MAP_REGION_FLAT(IMX_VPUMIX_BASE, IMX_VPUMIX_SIZE, MT_DEVICE | MT_RW), /* VPUMIX */
50 MAP_REGION_FLAT(IMX_CAAM_RAM_BASE, IMX_CAAM_RAM_SIZE, MT_MEMORY | MT_RW), /* CAMM RAM */
51 MAP_REGION_FLAT(IMX_NS_OCRAM_BASE, IMX_NS_OCRAM_SIZE, MT_MEMORY | MT_RW), /* NS OCRAM */
52 MAP_REGION_FLAT(IMX_ROM_BASE, IMX_ROM_SIZE, MT_MEMORY | MT_RO), /* ROM code */
53 MAP_REGION_FLAT(IMX_DRAM_BASE, IMX_DRAM_SIZE, MT_MEMORY | MT_RW | MT_NS), /* DRAM */
54 {0},
55 };
56
57 static const struct aipstz_cfg aipstz[] = {
58 {IMX_AIPSTZ1, 0x77777777, 0x77777777, .opacr = {0x0, 0x0, 0x0, 0x0, 0x0}, },
59 {IMX_AIPSTZ2, 0x77777777, 0x77777777, .opacr = {0x0, 0x0, 0x0, 0x0, 0x0}, },
60 {IMX_AIPSTZ3, 0x77777777, 0x77777777, .opacr = {0x0, 0x0, 0x0, 0x0, 0x0}, },
61 {IMX_AIPSTZ4, 0x77777777, 0x77777777, .opacr = {0x0, 0x0, 0x0, 0x0, 0x0}, },
62 {0},
63 };
64
65 static struct imx_rdc_cfg rdc[] = {
66 /* Master domain assignment */
67 RDC_MDAn(RDC_MDA_M4, DID1),
68
69 /* peripherals domain permission */
70 RDC_PDAPn(RDC_PDAP_UART4, D1R | D1W),
71 RDC_PDAPn(RDC_PDAP_UART2, D0R | D0W),
72
73 /* memory region */
74
75 /* Sentinel */
76 {0},
77 };
78
79 static const struct imx_csu_cfg csu_cfg[] = {
80 /* peripherals csl setting */
81 CSU_CSLx(CSU_CSL_RDC, CSU_SEC_LEVEL_3, LOCKED),
82 CSU_CSLx(CSU_CSL_TZASC, CSU_SEC_LEVEL_5, LOCKED),
83 CSU_CSLx(CSU_CSL_CSU, CSU_SEC_LEVEL_5, LOCKED),
84
85 /* master HP0~1 */
86
87 /* SA setting */
88 CSU_SA(CSU_SA_M4, NON_SEC_ACCESS, LOCKED),
89 CSU_SA(CSU_SA_SDMA1, NON_SEC_ACCESS, LOCKED),
90 CSU_SA(CSU_SA_PCIE_CTRL1, NON_SEC_ACCESS, LOCKED),
91 CSU_SA(CSU_SA_USB1, NON_SEC_ACCESS, LOCKED),
92 CSU_SA(CSU_SA_USB2, NON_SEC_ACCESS, LOCKED),
93 CSU_SA(CSU_SA_VPU, NON_SEC_ACCESS, LOCKED),
94 CSU_SA(CSU_SA_GPU, NON_SEC_ACCESS, LOCKED),
95 CSU_SA(CSU_SA_APBHDMA, NON_SEC_ACCESS, LOCKED),
96 CSU_SA(CSU_SA_ENET, NON_SEC_ACCESS, LOCKED),
97 CSU_SA(CSU_SA_USDHC1, NON_SEC_ACCESS, LOCKED),
98 CSU_SA(CSU_SA_USDHC2, NON_SEC_ACCESS, LOCKED),
99 CSU_SA(CSU_SA_USDHC3, NON_SEC_ACCESS, LOCKED),
100 CSU_SA(CSU_SA_HUGO, NON_SEC_ACCESS, LOCKED),
101 CSU_SA(CSU_SA_DAP, NON_SEC_ACCESS, LOCKED),
102 CSU_SA(CSU_SA_SDMA2, NON_SEC_ACCESS, LOCKED),
103 CSU_SA(CSU_SA_SDMA3, NON_SEC_ACCESS, LOCKED),
104 CSU_SA(CSU_SA_LCDIF, NON_SEC_ACCESS, LOCKED),
105 CSU_SA(CSU_SA_CSI, NON_SEC_ACCESS, LOCKED),
106
107 /* HP control setting */
108
109 /* Sentinel */
110 {0}
111 };
112
113 static entry_point_info_t bl32_image_ep_info;
114 static entry_point_info_t bl33_image_ep_info;
115
116 /* get SPSR for BL33 entry */
117 static uint32_t get_spsr_for_bl33_entry(void)
118 {
119 unsigned long el_status;
120 unsigned long mode;
121 uint32_t spsr;
122
123 /* figure out what mode we enter the non-secure world */
124 el_status = read_id_aa64pfr0_el1() >> ID_AA64PFR0_EL2_SHIFT;
125 el_status &= ID_AA64PFR0_ELX_MASK;
126
127 mode = (el_status) ? MODE_EL2 : MODE_EL1;
128
129 spsr = SPSR_64(mode, MODE_SP_ELX, DISABLE_ALL_EXCEPTIONS);
130 return spsr;
131 }
132
133 void bl31_tzc380_setup(void)
134 {
135 unsigned int val;
136
137 val = mmio_read_32(IMX_IOMUX_GPR_BASE + 0x28);
138 if ((val & GPR_TZASC_EN) != GPR_TZASC_EN)
139 return;
140
141 tzc380_init(IMX_TZASC_BASE);
142
143 /*
144 * Need to substact offset 0x40000000 from CPU address when
145 * programming tzasc region for i.mx8mm.
146 */
147
148 /* Enable 1G-5G S/NS RW */
149 tzc380_configure_region(0, 0x00000000, TZC_ATTR_REGION_SIZE(TZC_REGION_SIZE_4G) |
150 TZC_ATTR_REGION_EN_MASK | TZC_ATTR_SP_ALL);
151 }
152
153 void bl31_early_platform_setup2(u_register_t arg0, u_register_t arg1,
154 u_register_t arg2, u_register_t arg3)
155 {
156 unsigned int console_base = IMX_BOOT_UART_BASE;
157 static console_t console;
158 int i, ret;
159
160 /* Enable CSU NS access permission */
161 for (i = 0; i < 64; i++) {
162 mmio_write_32(IMX_CSU_BASE + i * 4, 0x00ff00ff);
163 }
164
165 imx_aipstz_init(aipstz);
166
167 if (console_base == 0U) {
168 console_base = imx8m_uart_get_base();
169 }
170
171 imx_rdc_init(rdc, console_base);
172
173 imx_csu_init(csu_cfg);
174
175 console_imx_uart_register(console_base, IMX_BOOT_UART_CLK_IN_HZ,
176 IMX_CONSOLE_BAUDRATE, &console);
177 /* This console is only used for boot stage */
178 console_set_scope(&console, CONSOLE_FLAG_BOOT);
179
180 imx8m_caam_init();
181
182 /*
183 * tell BL3-1 where the non-secure software image is located
184 * and the entry state information.
185 */
186 bl33_image_ep_info.pc = PLAT_NS_IMAGE_OFFSET;
187 bl33_image_ep_info.spsr = get_spsr_for_bl33_entry();
188 SET_SECURITY_STATE(bl33_image_ep_info.h.attr, NON_SECURE);
189
190 #if defined(SPD_opteed) || defined(SPD_trusty)
191 /* Populate entry point information for BL32 */
192 SET_PARAM_HEAD(&bl32_image_ep_info, PARAM_EP, VERSION_1, 0);
193 SET_SECURITY_STATE(bl32_image_ep_info.h.attr, SECURE);
194 bl32_image_ep_info.pc = BL32_BASE;
195 bl32_image_ep_info.spsr = 0;
196
197 /* Pass TEE base and size to bl33 */
198 bl33_image_ep_info.args.arg1 = BL32_BASE;
199 bl33_image_ep_info.args.arg2 = BL32_SIZE;
200
201 #ifdef SPD_trusty
202 bl32_image_ep_info.args.arg0 = BL32_SIZE;
203 bl32_image_ep_info.args.arg1 = BL32_BASE;
204 #else
205 /* Make sure memory is clean */
206 mmio_write_32(BL32_FDT_OVERLAY_ADDR, 0);
207 bl33_image_ep_info.args.arg3 = BL32_FDT_OVERLAY_ADDR;
208 bl32_image_ep_info.args.arg3 = BL32_FDT_OVERLAY_ADDR;
209 #endif
210 #endif
211 ret = imx_bl31_params_parse(arg0, IMX_NS_OCRAM_SIZE, IMX_NS_OCRAM_BASE,
212 &bl32_image_ep_info, &bl33_image_ep_info);
213 if (ret != 0) {
214 ret = imx_bl31_params_parse(arg0, IMX_TCM_BASE, IMX_TCM_SIZE,
215 &bl32_image_ep_info,
216 &bl33_image_ep_info);
217 }
218
219 #if !defined(SPD_opteed) && !defined(SPD_trusty)
220 enable_snvs_privileged_access();
221 #endif
222
223 bl31_tzc380_setup();
224 }
225
226 #define MAP_BL31_TOTAL \
227 MAP_REGION_FLAT(BL31_START, BL31_SIZE, MT_MEMORY | MT_RW | MT_SECURE)
228 #define MAP_BL31_RO \
229 MAP_REGION_FLAT(BL_CODE_BASE, BL_CODE_END - BL_CODE_BASE, MT_MEMORY | MT_RO | MT_SECURE)
230 #define MAP_COHERENT_MEM \
231 MAP_REGION_FLAT(BL_COHERENT_RAM_BASE, BL_COHERENT_RAM_END - BL_COHERENT_RAM_BASE, \
232 MT_DEVICE | MT_RW | MT_SECURE)
233 #define MAP_BL32_TOTAL \
234 MAP_REGION_FLAT(BL32_BASE, BL32_SIZE, MT_MEMORY | MT_RW)
235
236 void bl31_plat_arch_setup(void)
237 {
238 const mmap_region_t bl_regions[] = {
239 MAP_BL31_TOTAL,
240 MAP_BL31_RO,
241 #if USE_COHERENT_MEM
242 MAP_COHERENT_MEM,
243 #endif
244 #if defined(SPD_opteed) || defined(SPD_trusty)
245 /* Map TEE memory */
246 MAP_BL32_TOTAL,
247 #endif
248 {0}
249 };
250
251 setup_page_tables(bl_regions, imx_mmap);
252 enable_mmu_el3(0);
253 }
254
255 void bl31_platform_setup(void)
256 {
257 generic_delay_timer_init();
258
259 /* select the CKIL source to 32K OSC */
260 mmio_write_32(IMX_ANAMIX_BASE + ANAMIX_MISC_CTL, 0x1);
261
262 /* Init the dram info */
263 dram_info_init(SAVED_DRAM_TIMING_BASE);
264
265 plat_gic_driver_init();
266 plat_gic_init();
267
268 imx_gpc_init();
269 }
270
271 entry_point_info_t *bl31_plat_get_next_image_ep_info(unsigned int type)
272 {
273 if (type == NON_SECURE)
274 return &bl33_image_ep_info;
275 if (type == SECURE)
276 return &bl32_image_ep_info;
277
278 return NULL;
279 }
280
281 unsigned int plat_get_syscnt_freq2(void)
282 {
283 return COUNTER_FREQUENCY;
284 }
285
286 #ifdef SPD_trusty
287 void plat_trusty_set_boot_args(aapcs64_params_t *args)
288 {
289 args->arg0 = BL32_SIZE;
290 args->arg1 = BL32_BASE;
291 args->arg2 = TRUSTY_PARAMS_LEN_BYTES;
292 }
293 #endif