Debian Codegraph @

plat/imx/imx7/warp7/include/platform_def.h

raw
1 /*
2 * Copyright (c) 2018-2019, ARM Limited and Contributors. All rights reserved.
3 *
4 * SPDX-License-Identifier: BSD-3-Clause
5 */
6
7 #ifndef PLATFORM_DEF_H
8 #define PLATFORM_DEF_H
9
10 #include <arch.h>
11 #include <common/tbbr/tbbr_img_def.h>
12 #include <plat/common/common_def.h>
13
14 #define PLATFORM_STACK_SIZE 0x1000
15
16 #define PLATFORM_MAX_CPUS_PER_CLUSTER U(2)
17 #define PLATFORM_CLUSTER_COUNT U(1)
18 #define PLATFORM_CLUSTER0_CORE_COUNT PLATFORM_MAX_CPUS_PER_CLUSTER
19 #define PLATFORM_CLUSTER1_CORE_COUNT U(0)
20
21 #define PLATFORM_CORE_COUNT (PLATFORM_CLUSTER0_CORE_COUNT + \
22 PLATFORM_CLUSTER1_CORE_COUNT)
23
24 #define WARP7_PRIMARY_CPU U(0)
25
26 #define PLAT_NUM_PWR_DOMAINS (PLATFORM_CLUSTER_COUNT + \
27 PLATFORM_CORE_COUNT)
28 #define PLAT_MAX_PWR_LVL MPIDR_AFFLVL1
29
30 #define PLAT_MAX_RET_STATE 1
31 #define PLAT_MAX_OFF_STATE 2
32
33 /* Local power state for power domains in Run state. */
34 #define PLAT_LOCAL_STATE_RUN 0
35
36 /* Local power state for retention. Valid only for CPU power domains */
37 #define PLAT_LOCAL_STATE_RET 1
38
39 /*
40 * Local power state for OFF/power-down. Valid for CPU and cluster power
41 * domains.
42 */
43 #define PLAT_LOCAL_STATE_OFF 2
44
45 /*
46 * Macros used to parse state information from State-ID if it is using the
47 * recommended encoding for State-ID.
48 */
49 #define PLAT_LOCAL_PSTATE_WIDTH 4
50 #define PLAT_LOCAL_PSTATE_MASK ((1 << PLAT_LOCAL_PSTATE_WIDTH) - 1)
51
52 /*
53 * Some data must be aligned on the biggest cache line size in the platform.
54 * This is known only to the platform as it might have a combination of
55 * integrated and external caches.
56 * i.MX7 has a 32 byte cacheline size
57 * i.MX 7Solo Applications Processor Reference Manual, Rev. 0.1, 08/2016 pg 244
58 */
59 #define CACHE_WRITEBACK_SHIFT 4
60 #define CACHE_WRITEBACK_GRANULE (1 << CACHE_WRITEBACK_SHIFT)
61
62 /*
63 * Partition memory into secure BootROM, OCRAM_S, non-secure DRAM, secure DRAM
64 */
65 #define BOOT_ROM_BASE 0x00000000
66 #define BOOT_ROM_SIZE 0x00020000
67
68 #define OCRAM_S_BASE 0x00180000
69 #define OCRAM_S_SIZE 0x00008000
70
71 /* Controller maps 2GB, board contains 512 MB. 0x80000000 - 0xa0000000 */
72 #define DRAM_BASE 0x80000000
73 #define DRAM_SIZE 0x20000000
74 #define DRAM_LIMIT (DRAM_BASE + DRAM_SIZE)
75
76 /* Place OPTEE at minus 32 MB from the end of memory. 0x9e000000 - 0xa0000000 */
77 #define IMX7_OPTEE_SIZE 0x02000000
78 #define IMX7_OPTEE_BASE (DRAM_LIMIT - IMX7_OPTEE_SIZE)
79 #define IMX7_OPTEE_LIMIT (IMX7_OPTEE_BASE + IMX7_OPTEE_SIZE)
80
81 /* Place ATF directly beneath OPTEE. 0x9df00000 - 0x9e000000 */
82 #define BL2_RAM_SIZE 0x00100000
83 #define BL2_RAM_BASE (IMX7_OPTEE_BASE - BL2_RAM_SIZE)
84 #define BL2_RAM_LIMIT (BL2_RAM_BASE + BL2_RAM_SIZE)
85
86 /* Optional Mailbox. Only relevant on i.MX7D. 0x9deff000 - 0x9df00000*/
87 #define SHARED_RAM_SIZE 0x00001000
88 #define SHARED_RAM_BASE (BL2_RAM_BASE - SHARED_RAM_SIZE)
89 #define SHARED_RAM_LIMIT (SHARED_RAM_BASE + SHARED_RAM_SIZE)
90
91 /* Define the absolute location of u-boot 0x87800000 - 0x87900000 */
92 #define IMX7_UBOOT_SIZE 0x00100000
93 #define IMX7_UBOOT_BASE (DRAM_BASE + 0x7800000)
94 #define IMX7_UBOOT_LIMIT (IMX7_UBOOT_BASE + IMX7_UBOOT_SIZE)
95
96 /* Define FIP image absolute location 0x80000000 - 0x80100000 */
97 #define IMX_FIP_SIZE 0x00100000
98 #define IMX_FIP_BASE (DRAM_BASE)
99 #define IMX_FIP_LIMIT (IMX_FIP_BASE + IMX_FIP_SIZE)
100
101 /* Define FIP image location at 1MB offset */
102 #define IMX_FIP_MMC_BASE (1024 * 1024)
103
104 /* Define the absolute location of DTB 0x83000000 - 0x83100000 */
105 #define IMX7_DTB_SIZE 0x00100000
106 #define IMX7_DTB_BASE (DRAM_BASE + 0x03000000)
107 #define IMX7_DTB_LIMIT (IMX7_DTB_BASE + IMX7_DTB_SIZE)
108
109 /* Define the absolute location of DTB Overlay 0x83100000 - 0x83101000 */
110 #define IMX7_DTB_OVERLAY_SIZE 0x00001000
111 #define IMX7_DTB_OVERLAY_BASE IMX7_DTB_LIMIT
112 #define IMX7_DTB_OVERLAY_LIMIT (IMX7_DTB_OVERLAY_BASE + \
113 IMX7_DTB_OVERLAY_SIZE)
114
115 /*
116 * BL2 specific defines.
117 *
118 * Put BL2 just below BL3-1. BL2_BASE is calculated using the current BL2 debug
119 * size plus a little space for growth.
120 */
121 #define BL2_BASE BL2_RAM_BASE
122 #define BL2_LIMIT (BL2_RAM_BASE + BL2_RAM_SIZE)
123
124 /*
125 * BL3-2/OPTEE
126 */
127 # define BL32_BASE IMX7_OPTEE_BASE
128 # define BL32_LIMIT (IMX7_OPTEE_BASE + IMX7_OPTEE_SIZE)
129
130 /*
131 * BL3-3/U-BOOT
132 */
133 #define BL33_BASE IMX7_UBOOT_BASE
134 #define BL33_LIMIT (IMX7_UBOOT_BASE + IMX7_UBOOT_SIZE)
135
136 /*
137 * ATF's view of memory
138 *
139 * 0xa0000000 +-----------------+
140 * | DDR | BL32/OPTEE
141 * 0x9e000000 +-----------------+
142 * | DDR | BL23 ATF
143 * 0x9df00000 +-----------------+
144 * | DDR | Shared MBOX RAM
145 * 0x9de00000 +-----------------+
146 * | DDR | Unallocated
147 * 0x87900000 +-----------------+
148 * | DDR | BL33/U-BOOT
149 * 0x87800000 +-----------------+
150 * | DDR | Unallocated
151 * 0x83101000 +-----------------+
152 * | DDR | DTB Overlay
153 * 0x83100000 +-----------------+
154 * | DDR | DTB
155 * 0x83000000 +-----------------+
156 * | DDR | Unallocated
157 * 0x80100000 +-----------------+
158 * | DDR | FIP
159 * 0x80000000 +-----------------+
160 * | SOC I/0 |
161 * 0x00a00000 +-----------------+
162 * | OCRAM | Not used
163 * 0x00900000 +-----------------+
164 * | SOC I/0 |
165 * 0x00188000 +-----------------+
166 * | OCRAM_S | Not used
167 * 0x00180000 +-----------------+
168 * | SOC I/0 |
169 * 0x00020000 +-----------------+
170 * | BootROM | BL1
171 * 0x00000000 +-----------------+
172 */
173
174 #define PLAT_PHY_ADDR_SPACE_SIZE (1ULL << 32)
175 #define PLAT_VIRT_ADDR_SPACE_SIZE (1ULL << 32)
176 #define MAX_MMAP_REGIONS 10
177 #define MAX_XLAT_TABLES 6
178 #define MAX_IO_DEVICES 2
179 #define MAX_IO_HANDLES 3
180 #define MAX_IO_BLOCK_DEVICES 1U
181
182 /* UART defines */
183 #if PLAT_WARP7_UART == 1
184 #define PLAT_WARP7_UART_BASE MXC_UART1_BASE
185 #elif PLAT_WARP7_UART == 6
186 #define IMX_UART_DTE
187 #define PLAT_WARP7_UART_BASE MXC_UART6_BASE
188 #else
189 #error "define PLAT_WARP7_UART=1 or PLAT_WARP7_UART=6"
190 #endif
191
192 #define PLAT_IMX7_BOOT_UART_BASE PLAT_WARP7_UART_BASE
193 #define PLAT_IMX7_BOOT_UART_CLK_IN_HZ 24000000
194 #define PLAT_IMX7_CONSOLE_BAUDRATE 115200
195
196 /* MMC defines */
197 #ifndef PLAT_WARP7_SD
198 #define PLAT_WARP7_SD 3
199 #endif
200
201 #if PLAT_WARP7_SD == 1
202 #define PLAT_WARP7_BOOT_MMC_BASE USDHC1_BASE
203 #endif /* PLAT_WARP7_SD == 1 */
204
205 #if PLAT_WARP7_SD == 2
206 #define PLAT_WARP7_BOOT_MMC_BASE USDHC2_BASE
207 #endif /* PLAT_WARP7_SD == 2 */
208
209 #if PLAT_WARP7_SD == 3
210 #define PLAT_WARP7_BOOT_MMC_BASE USDHC3_BASE
211 #endif /* PLAT_WARP7_SD == 3 */
212
213 /*
214 * System counter
215 */
216 #define SYS_COUNTER_FREQ_IN_TICKS 8000000 /* 8 MHz */
217
218 #endif /* PLATFORM_DEF_H */