Debian Codegraph @

plat/arm/common/arm_common.mk

raw
1 #
2 # Copyright (c) 2015-2024, Arm Limited and Contributors. All rights reserved.
3 #
4 # SPDX-License-Identifier: BSD-3-Clause
5 #
6
7 include common/fdt_wrappers.mk
8
9 ifeq (${ARCH},aarch32)
10 ifeq (${AARCH32_SP},none)
11 $(error Variable AARCH32_SP has to be set for AArch32)
12 endif
13 endif
14
15 ifeq (${ARCH}, aarch64)
16 # On ARM standard platorms, the TSP can execute from Trusted SRAM, Trusted
17 # DRAM (if available) or the TZC secured area of DRAM.
18 # TZC secured DRAM is the default.
19
20 ARM_TSP_RAM_LOCATION ?= dram
21
22 ifeq (${ARM_TSP_RAM_LOCATION}, tsram)
23 ARM_TSP_RAM_LOCATION_ID = ARM_TRUSTED_SRAM_ID
24 else ifeq (${ARM_TSP_RAM_LOCATION}, tdram)
25 ARM_TSP_RAM_LOCATION_ID = ARM_TRUSTED_DRAM_ID
26 else ifeq (${ARM_TSP_RAM_LOCATION}, dram)
27 ARM_TSP_RAM_LOCATION_ID = ARM_DRAM_ID
28 else
29 $(error Unsupported ARM_TSP_RAM_LOCATION value)
30 endif
31
32 # Process flags
33 # Process ARM_BL31_IN_DRAM flag
34 ARM_BL31_IN_DRAM := 0
35 $(eval $(call assert_boolean,ARM_BL31_IN_DRAM))
36 $(eval $(call add_define,ARM_BL31_IN_DRAM))
37 else
38 ARM_TSP_RAM_LOCATION_ID = ARM_TRUSTED_SRAM_ID
39 endif
40
41 $(eval $(call add_define,ARM_TSP_RAM_LOCATION_ID))
42
43
44 # For the original power-state parameter format, the State-ID can be encoded
45 # according to the recommended encoding or zero. This flag determines which
46 # State-ID encoding to be parsed.
47 ARM_RECOM_STATE_ID_ENC := 0
48
49 # If the PSCI_EXTENDED_STATE_ID is set, then ARM_RECOM_STATE_ID_ENC need to
50 # be set. Else throw a build error.
51 ifeq (${PSCI_EXTENDED_STATE_ID}, 1)
52 ifeq (${ARM_RECOM_STATE_ID_ENC}, 0)
53 $(error Build option ARM_RECOM_STATE_ID_ENC needs to be set if \
54 PSCI_EXTENDED_STATE_ID is set for ARM platforms)
55 endif
56 endif
57
58 # Process ARM_RECOM_STATE_ID_ENC flag
59 $(eval $(call assert_boolean,ARM_RECOM_STATE_ID_ENC))
60 $(eval $(call add_define,ARM_RECOM_STATE_ID_ENC))
61
62 # Process ARM_DISABLE_TRUSTED_WDOG flag
63 # By default, Trusted Watchdog is always enabled unless
64 # SPIN_ON_BL1_EXIT or ENABLE_RME is set
65 ARM_DISABLE_TRUSTED_WDOG := 0
66 ifneq ($(filter 1,${SPIN_ON_BL1_EXIT} ${ENABLE_RME}),)
67 ARM_DISABLE_TRUSTED_WDOG := 1
68 endif
69 $(eval $(call assert_boolean,ARM_DISABLE_TRUSTED_WDOG))
70 $(eval $(call add_define,ARM_DISABLE_TRUSTED_WDOG))
71
72 # Process ARM_CONFIG_CNTACR
73 ARM_CONFIG_CNTACR := 1
74 $(eval $(call assert_boolean,ARM_CONFIG_CNTACR))
75 $(eval $(call add_define,ARM_CONFIG_CNTACR))
76
77 # Process ARM_BL31_IN_DRAM flag
78 ARM_BL31_IN_DRAM := 0
79 $(eval $(call assert_boolean,ARM_BL31_IN_DRAM))
80 $(eval $(call add_define,ARM_BL31_IN_DRAM))
81
82 # As per CCA security model, all root firmware must execute from on-chip secure
83 # memory. This means we must not run BL31 from TZC-protected DRAM.
84 ifeq (${ARM_BL31_IN_DRAM},1)
85 ifeq (${ENABLE_RME},1)
86 $(error BL31 must not run from DRAM on RME-systems. Please set ARM_BL31_IN_DRAM to 0)
87 endif
88 endif
89
90 # Process ARM_PLAT_MT flag
91 ARM_PLAT_MT := 0
92 $(eval $(call assert_boolean,ARM_PLAT_MT))
93 $(eval $(call add_define,ARM_PLAT_MT))
94
95 # Use translation tables library v2 by default
96 ARM_XLAT_TABLES_LIB_V1 := 0
97 $(eval $(call assert_boolean,ARM_XLAT_TABLES_LIB_V1))
98 $(eval $(call add_define,ARM_XLAT_TABLES_LIB_V1))
99
100 # Don't have the Linux kernel as a BL33 image by default
101 ARM_LINUX_KERNEL_AS_BL33 := 0
102 $(eval $(call assert_boolean,ARM_LINUX_KERNEL_AS_BL33))
103 $(eval $(call add_define,ARM_LINUX_KERNEL_AS_BL33))
104
105 ifeq (${ARM_LINUX_KERNEL_AS_BL33},1)
106 ifneq (${ARCH},aarch64)
107 ifneq (${RESET_TO_SP_MIN},1)
108 $(error ARM_LINUX_KERNEL_AS_BL33 is only available if RESET_TO_SP_MIN=1.)
109 endif
110 endif
111 ifndef PRELOADED_BL33_BASE
112 $(error PRELOADED_BL33_BASE must be set if ARM_LINUX_KERNEL_AS_BL33 is used.)
113 endif
114 ifeq (${RESET_TO_BL31},1)
115 ifndef ARM_PRELOADED_DTB_BASE
116 $(error ARM_PRELOADED_DTB_BASE must be set if ARM_LINUX_KERNEL_AS_BL33 is used with RESET_TO_BL31.)
117 endif
118 $(eval $(call add_define,ARM_PRELOADED_DTB_BASE))
119 endif
120 endif
121
122 # Add the build options to pack Trusted OS Extra1 and Trusted OS Extra2 images
123 # in the FIP if the platform requires.
124 ifneq ($(BL32_EXTRA1),)
125 $(eval $(call TOOL_ADD_IMG,bl32_extra1,--tos-fw-extra1))
126 endif
127 ifneq ($(BL32_EXTRA2),)
128 $(eval $(call TOOL_ADD_IMG,bl32_extra2,--tos-fw-extra2))
129 endif
130
131 # Enable PSCI_STAT_COUNT/RESIDENCY APIs on ARM platforms
132 ENABLE_PSCI_STAT := 1
133 ENABLE_PMF := 1
134
135 # Override the standard libc with optimised libc_asm
136 OVERRIDE_LIBC := 1
137 ifeq (${OVERRIDE_LIBC},1)
138 include lib/libc/libc_asm.mk
139 endif
140
141 # On ARM platforms, separate the code and read-only data sections to allow
142 # mapping the former as executable and the latter as execute-never.
143 SEPARATE_CODE_AND_RODATA := 1
144
145 # On ARM platforms, disable SEPARATE_NOBITS_REGION by default. Both PROGBITS
146 # and NOBITS sections of BL31 image are adjacent to each other and loaded
147 # into Trusted SRAM.
148 SEPARATE_NOBITS_REGION := 0
149
150 # In order to support SEPARATE_NOBITS_REGION for Arm platforms, we need to load
151 # BL31 PROGBITS into secure DRAM space and BL31 NOBITS into SRAM. Hence mandate
152 # the build to require that ARM_BL31_IN_DRAM is enabled as well.
153 ifeq ($(SEPARATE_NOBITS_REGION),1)
154 ifneq ($(ARM_BL31_IN_DRAM),1)
155 $(error For SEPARATE_NOBITS_REGION, ARM_BL31_IN_DRAM must be enabled)
156 endif
157 ifneq ($(RECLAIM_INIT_CODE),0)
158 $(error For SEPARATE_NOBITS_REGION, RECLAIM_INIT_CODE cannot be supported)
159 endif
160 endif
161
162 # Enable PIE support for RESET_TO_BL31/RESET_TO_SP_MIN case
163 ifneq ($(filter 1,${RESET_TO_BL31} ${RESET_TO_SP_MIN}),)
164 ENABLE_PIE := 1
165 endif
166
167 # On Arm platform, disable ARM_FW_CONFIG_LOAD_ENABLE by default.
168 ARM_FW_CONFIG_LOAD_ENABLE := 0
169 $(eval $(call assert_boolean,ARM_FW_CONFIG_LOAD_ENABLE))
170 $(eval $(call add_define,ARM_FW_CONFIG_LOAD_ENABLE))
171
172 # In order to enable ARM_FW_CONFIG_LOAD_ENABLE for the Arm platform, the
173 # platform should be reset to BL2 (RESET_TO_BL2=1), and FW_CONFIG must be
174 # specified.
175 ifeq (${ARM_FW_CONFIG_LOAD_ENABLE},1)
176 ifneq (${RESET_TO_BL2},1)
177 $(error RESET_TO_BL2 must be enabled when ARM_FW_CONFIG_LOAD_ENABLE \
178 is enabled)
179 endif
180 ifeq (${FW_CONFIG},)
181 $(error FW_CONFIG must be specified when ARM_FW_CONFIG_LOAD_ENABLE \
182 is enabled)
183 endif
184 endif
185
186 # Disable GPT parser support, use FIP image by default
187 ARM_GPT_SUPPORT := 0
188 $(eval $(call assert_boolean,ARM_GPT_SUPPORT))
189 $(eval $(call add_define,ARM_GPT_SUPPORT))
190
191 # Include necessary sources to parse GPT image
192 ifeq (${ARM_GPT_SUPPORT}, 1)
193 BL2_SOURCES += drivers/partition/gpt.c \
194 drivers/partition/partition.c
195 endif
196
197 # Enable CRC instructions via extension for ARMv8-A CPUs.
198 # For ARMv8.1-A, and onwards CRC instructions are default enabled.
199 # Enable HW computed CRC support unconditionally in BL2 component.
200 ifeq (${ARM_ARCH_MAJOR},8)
201 ifeq (${ARM_ARCH_MINOR},0)
202 BL2_CPPFLAGS += -march=armv8-a+crc
203 endif
204 endif
205
206 ifeq ($(PSA_FWU_SUPPORT),1)
207 # GPT support is recommended as per PSA FWU specification hence
208 # PSA FWU implementation is tightly coupled with GPT support,
209 # and it does not support other formats.
210 ifneq ($(ARM_GPT_SUPPORT),1)
211 $(error For PSA_FWU_SUPPORT, ARM_GPT_SUPPORT must be enabled)
212 endif
213 FWU_MK := drivers/fwu/fwu.mk
214 $(info Including ${FWU_MK})
215 include ${FWU_MK}
216 endif
217
218 ifeq (${ARCH}, aarch64)
219 PLAT_INCLUDES += -Iinclude/plat/arm/common/aarch64
220 endif
221
222 PLAT_BL_COMMON_SOURCES += plat/arm/common/${ARCH}/arm_helpers.S \
223 plat/arm/common/arm_common.c \
224 plat/arm/common/arm_console.c
225
226 ifeq (${ARM_XLAT_TABLES_LIB_V1}, 1)
227 PLAT_BL_COMMON_SOURCES += lib/xlat_tables/xlat_tables_common.c \
228 lib/xlat_tables/${ARCH}/xlat_tables.c
229 else
230 ifeq (${XLAT_MPU_LIB_V1}, 1)
231 include lib/xlat_mpu/xlat_mpu.mk
232 PLAT_BL_COMMON_SOURCES += ${XLAT_MPU_LIB_V1_SRCS}
233 else
234 include lib/xlat_tables_v2/xlat_tables.mk
235 PLAT_BL_COMMON_SOURCES += ${XLAT_TABLES_LIB_SRCS}
236 endif
237 endif
238
239 ARM_IO_SOURCES += plat/arm/common/arm_io_storage.c \
240 plat/arm/common/fconf/arm_fconf_io.c
241 ifeq (${SPD},spmd)
242 ifeq (${BL2_ENABLE_SP_LOAD},1)
243 ARM_IO_SOURCES += plat/arm/common/fconf/arm_fconf_sp.c
244 endif
245 endif
246
247 BL1_SOURCES += drivers/io/io_fip.c \
248 drivers/io/io_memmap.c \
249 drivers/io/io_storage.c \
250 plat/arm/common/arm_bl1_setup.c \
251 plat/arm/common/arm_err.c \
252 ${ARM_IO_SOURCES}
253
254 ifdef EL3_PAYLOAD_BASE
255 # Need the plat_arm_program_trusted_mailbox() function to release secondary CPUs from
256 # their holding pen
257 BL1_SOURCES += plat/arm/common/arm_pm.c
258 endif
259
260 BL2_SOURCES += drivers/delay_timer/delay_timer.c \
261 drivers/delay_timer/generic_delay_timer.c \
262 drivers/io/io_fip.c \
263 drivers/io/io_memmap.c \
264 drivers/io/io_storage.c \
265 plat/arm/common/arm_bl2_setup.c \
266 plat/arm/common/arm_err.c \
267 common/tf_crc32.c \
268 ${ARM_IO_SOURCES}
269
270 # Firmware Configuration Framework sources
271 include lib/fconf/fconf.mk
272
273 BL1_SOURCES += ${FCONF_SOURCES} ${FCONF_DYN_SOURCES}
274 BL2_SOURCES += ${FCONF_SOURCES} ${FCONF_DYN_SOURCES}
275
276 # Add `libfdt` and Arm common helpers required for Dynamic Config
277 include lib/libfdt/libfdt.mk
278
279 DYN_CFG_SOURCES += plat/arm/common/arm_dyn_cfg.c \
280 plat/arm/common/arm_dyn_cfg_helpers.c \
281 common/uuid.c
282
283 DYN_CFG_SOURCES += ${FDT_WRAPPERS_SOURCES}
284
285 BL1_SOURCES += ${DYN_CFG_SOURCES}
286 BL2_SOURCES += ${DYN_CFG_SOURCES}
287
288 ifeq (${RESET_TO_BL2},1)
289 BL2_SOURCES += plat/arm/common/arm_bl2_el3_setup.c
290 endif
291
292 # Because BL1/BL2 execute in AArch64 mode but BL32 in AArch32 we need to use
293 # the AArch32 descriptors.
294 ifeq (${JUNO_AARCH32_EL3_RUNTIME},1)
295 BL2_SOURCES += plat/arm/common/aarch32/arm_bl2_mem_params_desc.c
296 else
297 ifeq ($(filter $(PLAT), corstone1000 rd1ae),)
298 BL2_SOURCES += plat/arm/common/${ARCH}/arm_bl2_mem_params_desc.c
299 endif
300 endif
301 BL2_SOURCES += plat/arm/common/arm_image_load.c \
302 common/desc_image_load.c
303 ifeq (${SPD},opteed)
304 BL2_SOURCES += lib/optee/optee_utils.c
305 endif
306
307 BL2U_SOURCES += drivers/delay_timer/delay_timer.c \
308 drivers/delay_timer/generic_delay_timer.c \
309 plat/arm/common/arm_bl2u_setup.c
310
311 BL31_SOURCES += plat/arm/common/arm_bl31_setup.c \
312 plat/arm/common/arm_pm.c \
313 plat/arm/common/arm_topology.c \
314 plat/common/plat_psci_common.c
315
316 ifeq (${TRANSFER_LIST}, 1)
317 TRANSFER_LIST_SOURCES += plat/arm/common/arm_transfer_list.c
318 endif
319
320 ifneq ($(filter 1,${ENABLE_PMF} ${ETHOSN_NPU_DRIVER}),)
321 ARM_SVC_HANDLER_SRCS :=
322
323 ifeq (${ENABLE_PMF},1)
324 ARM_SVC_HANDLER_SRCS += lib/pmf/pmf_smc.c
325 endif
326
327 ifeq (${ETHOSN_NPU_DRIVER},1)
328 ARM_SVC_HANDLER_SRCS += plat/arm/common/fconf/fconf_ethosn_getter.c \
329 drivers/delay_timer/delay_timer.c \
330 drivers/arm/ethosn/ethosn_smc.c
331 ifeq (${ETHOSN_NPU_TZMP1},1)
332 ARM_SVC_HANDLER_SRCS += drivers/arm/ethosn/ethosn_big_fw.c
333 endif
334 endif
335
336 ifeq (${ARCH}, aarch64)
337 BL31_SOURCES += plat/arm/common/aarch64/execution_state_switch.c\
338 plat/arm/common/arm_sip_svc.c \
339 plat/arm/common/plat_arm_sip_svc.c \
340 ${ARM_SVC_HANDLER_SRCS}
341 else
342 BL32_SOURCES += plat/arm/common/arm_sip_svc.c \
343 plat/arm/common/plat_arm_sip_svc.c \
344 ${ARM_SVC_HANDLER_SRCS}
345 endif
346 endif
347
348 ifeq (${EL3_EXCEPTION_HANDLING},1)
349 BL31_SOURCES += plat/common/aarch64/plat_ehf.c
350 endif
351
352 ifeq (${SDEI_SUPPORT},1)
353 BL31_SOURCES += plat/arm/common/aarch64/arm_sdei.c
354 ifeq (${SDEI_IN_FCONF},1)
355 BL31_SOURCES += plat/arm/common/fconf/fconf_sdei_getter.c
356 endif
357 endif
358
359 # RAS sources
360 ifeq (${ENABLE_FEAT_RAS}-${HANDLE_EA_EL3_FIRST_NS},1-1)
361 BL31_SOURCES += lib/extensions/ras/std_err_record.c \
362 lib/extensions/ras/ras_common.c
363 endif
364
365 # Pointer Authentication sources
366 ifeq (${ENABLE_PAUTH}, 1)
367 PLAT_BL_COMMON_SOURCES += plat/arm/common/aarch64/arm_pauth.c
368 endif
369
370 ifeq (${SPD},spmd)
371 BL31_SOURCES += plat/common/plat_spmd_manifest.c \
372 common/uuid.c \
373 ${LIBFDT_SRCS}
374
375 BL31_SOURCES += ${FDT_WRAPPERS_SOURCES}
376 endif
377
378 ifeq (${DRTM_SUPPORT},1)
379 BL31_SOURCES += plat/arm/common/arm_err.c
380 endif
381
382 ifneq ($(filter 1,${MEASURED_BOOT} ${TRUSTED_BOARD_BOOT} ${DRTM_SUPPORT}),)
383 PLAT_INCLUDES += -Iplat/arm/common \
384 -Iinclude/drivers/auth/mbedtls
385 # Specify mbed TLS configuration file
386 ifeq (${PSA_CRYPTO},1)
387 MBEDTLS_CONFIG_FILE ?= "<plat_arm_psa_mbedtls_config.h>"
388 else
389 MBEDTLS_CONFIG_FILE ?= "<plat_arm_mbedtls_config.h>"
390 endif
391 endif
392
393 ifneq (${TRUSTED_BOARD_BOOT},0)
394
395 # Include common TBB sources
396 AUTH_SOURCES := drivers/auth/auth_mod.c \
397 drivers/auth/img_parser_mod.c
398
399 # Include the selected chain of trust sources.
400 ifeq (${COT},tbbr)
401 BL1_SOURCES += drivers/auth/tbbr/tbbr_cot_common.c \
402 drivers/auth/tbbr/tbbr_cot_bl1.c
403 ifneq (${COT_DESC_IN_DTB},0)
404 BL2_SOURCES += lib/fconf/fconf_cot_getter.c
405 else
406 # Juno has its own TBBR CoT file for BL2
407 ifeq (${PLAT},juno)
408 BL2_SOURCES += drivers/auth/tbbr/tbbr_cot_common.c
409 endif
410 endif
411 else ifeq (${COT},dualroot)
412 BL1_SOURCES += drivers/auth/dualroot/bl1_cot.c
413 ifneq (${COT_DESC_IN_DTB},0)
414 BL2_SOURCES += lib/fconf/fconf_cot_getter.c
415 endif
416 else ifeq (${COT},cca)
417 BL1_SOURCES += drivers/auth/cca/bl1_cot.c
418 ifneq (${COT_DESC_IN_DTB},0)
419 BL2_SOURCES += lib/fconf/fconf_cot_getter.c
420 endif
421 else
422 $(error Unknown chain of trust ${COT})
423 endif
424
425 ifeq (${COT_DESC_IN_DTB},0)
426 ifeq (${COT},dualroot)
427 COTDTPATH := fdts/dualroot_cot_descriptors.dtsi
428 else ifeq (${COT},cca)
429 COTDTPATH := fdts/cca_cot_descriptors.dtsi
430 else ifeq (${COT},tbbr)
431 ifneq (${PLAT},juno)
432 COTDTPATH := fdts/tbbr_cot_descriptors.dtsi
433 endif
434 endif
435 endif
436
437 BL1_SOURCES += ${AUTH_SOURCES} \
438 bl1/tbbr/tbbr_img_desc.c \
439 plat/arm/common/arm_bl1_fwu.c \
440 plat/common/tbbr/plat_tbbr.c
441
442 BL2_SOURCES += ${AUTH_SOURCES} \
443 plat/common/tbbr/plat_tbbr.c
444
445 $(eval $(call TOOL_ADD_IMG,ns_bl2u,--fwu,FWU_))
446
447 IMG_PARSER_LIB_MK := drivers/auth/mbedtls/mbedtls_x509.mk
448
449 $(info Including ${IMG_PARSER_LIB_MK})
450 include ${IMG_PARSER_LIB_MK}
451 endif
452
453 # Include Measured Boot makefile before any Crypto library makefile.
454 # Crypto library makefile may need default definitions of Measured Boot build
455 # flags present in Measured Boot makefile.
456 ifneq ($(filter 1,${MEASURED_BOOT} ${DRTM_SUPPORT}),)
457 MEASURED_BOOT_MK := drivers/measured_boot/event_log/event_log.mk
458 $(info Including ${MEASURED_BOOT_MK})
459 include ${MEASURED_BOOT_MK}
460
461 ifeq (${MEASURED_BOOT},1)
462 BL1_SOURCES += ${EVENT_LOG_SOURCES}
463 BL2_SOURCES += ${EVENT_LOG_SOURCES}
464 endif
465
466 ifeq (${DRTM_SUPPORT},1)
467 BL31_SOURCES += ${EVENT_LOG_SOURCES}
468 endif
469 endif
470
471 ifneq ($(filter 1,${MEASURED_BOOT} ${TRUSTED_BOARD_BOOT} ${DRTM_SUPPORT}),)
472 CRYPTO_SOURCES := drivers/auth/crypto_mod.c \
473 lib/fconf/fconf_tbbr_getter.c
474 BL1_SOURCES += ${CRYPTO_SOURCES}
475 BL2_SOURCES += ${CRYPTO_SOURCES}
476 BL31_SOURCES += drivers/auth/crypto_mod.c
477
478 # We expect to locate the *.mk files under the directories specified below
479 CRYPTO_LIB_MK := drivers/auth/mbedtls/mbedtls_crypto.mk
480
481 $(info Including ${CRYPTO_LIB_MK})
482 include ${CRYPTO_LIB_MK}
483 endif
484
485 ifeq (${RECLAIM_INIT_CODE}, 1)
486 ifeq (${ARM_XLAT_TABLES_LIB_V1}, 1)
487 $(error To reclaim init code xlat tables v2 must be used)
488 endif
489 endif
490
491 ifneq ($(COTDTPATH),)
492 cot-dt-defines = IMAGE_BL2 $(BL2_DEFINES) $(PLAT_BL_COMMON_DEFINES)
493 cot-dt-include-dirs = $(BL2_INCLUDE_DIRS) $(PLAT_BL_COMMON_INCLUDE_DIRS)
494
495 cot-dt-cpp-flags = $(cot-dt-defines:%=-D%)
496 cot-dt-cpp-flags += $(cot-dt-include-dirs:%=-I%)
497
498 cot-dt-cpp-flags += $(BL2_CPPFLAGS) $(PLAT_BL_COMMON_CPPFLAGS)
499 cot-dt-cpp-flags += $(CPPFLAGS) $(BL_CPPFLAGS) $(TF_CFLAGS_$(ARCH))
500 cot-dt-cpp-flags += -c -x assembler-with-cpp -E -P -o $@ $<
501
502 $(BUILD_PLAT)/$(COTDTPATH:.dtsi=.dts): $(COTDTPATH) | $$(@D)/
503 $(q)$($(ARCH)-cpp) $(cot-dt-cpp-flags)
504
505 $(BUILD_PLAT)/$(COTDTPATH:.dtsi=.c): $(BUILD_PLAT)/$(COTDTPATH:.dtsi=.dts) | $$(@D)/
506 $(if $(host-poetry),$(q)poetry -q install)
507 $(q)$(if $(host-poetry),poetry run )cot-dt2c convert-to-c $< $@
508
509 BL2_SOURCES += $(BUILD_PLAT)/$(COTDTPATH:.dtsi=.c)
510 endif