Debian Codegraph @

plat/arm/board/tc/platform.mk

raw
1 # Copyright (c) 2021-2024, Arm Limited. All rights reserved.
2 #
3 # SPDX-License-Identifier: BSD-3-Clause
4 #
5
6 include common/fdt_wrappers.mk
7
8 TARGET_FLAVOUR := fvp
9 # DPU with SCMI may not necessarily work, so allow its independence
10 TC_DPU_USE_SCMI_CLK := 1
11 # SCMI power domain control enable
12 TC_SCMI_PD_CTRL_EN := 1
13
14 # System setup
15 CSS_USE_SCMI_SDS_DRIVER := 1
16 HW_ASSISTED_COHERENCY := 1
17 USE_COHERENT_MEM := 0
18 GIC_ENABLE_V4_EXTN := 1
19 GICV3_SUPPORT_GIC600 := 1
20 override NEED_BL2U := no
21 override ARM_PLAT_MT := 1
22
23 # CPU setup
24 ARM_ARCH_MINOR := 7
25 BRANCH_PROTECTION := 1
26 ENABLE_FEAT_MPAM := 1 # default is 2, optimise
27 ENABLE_SVE_FOR_NS := 2 # to show we use it
28 ENABLE_SVE_FOR_SWD := 1
29 ENABLE_SME_FOR_NS := 2
30 ENABLE_SME2_FOR_NS := 2
31 ENABLE_SME_FOR_SWD := 1
32 ENABLE_TRBE_FOR_NS := 1
33 ENABLE_SYS_REG_TRACE_FOR_NS := 1
34 ENABLE_FEAT_AMU := 1
35 ENABLE_AMU_FCONF := 1
36 ENABLE_AMU_AUXILIARY_COUNTERS := 1
37 ENABLE_MPMM := 1
38 ENABLE_MPMM_FCONF := 1
39 ENABLE_FEAT_MTE2 := 2
40 ENABLE_SPE_FOR_NS := 3
41 ENABLE_FEAT_TCR2 := 3
42
43 CTX_INCLUDE_AARCH32_REGS := 0
44
45 ifeq (${SPD},spmd)
46 SPMD_SPM_AT_SEL2 := 1
47 CTX_INCLUDE_PAUTH_REGS := 1
48 endif
49
50 # TC RESOLUTION - LIST OF VALID OPTIONS (this impacts only FVP)
51 TC_RESOLUTION_OPTIONS := 640x480p60 \
52 1920x1080p60
53 # Set default to the 640x480p60 resolution mode
54 TC_RESOLUTION ?= $(firstword $(TC_RESOLUTION_OPTIONS))
55
56 # Check resolution option for FVP
57 ifneq ($(filter ${TARGET_FLAVOUR}, fvp),)
58 ifeq ($(filter ${TC_RESOLUTION}, ${TC_RESOLUTION_OPTIONS}),)
59 $(error TC_RESOLUTION is ${TC_RESOLUTION}, it must be: ${TC_RESOLUTION_OPTIONS})
60 endif
61 endif
62
63 ifneq ($(shell expr $(TARGET_PLATFORM) \<= 1), 0)
64 $(error Platform ${PLAT}$(TARGET_PLATFORM) is no longer available.)
65 endif
66
67 ifneq ($(shell expr $(TARGET_PLATFORM) = 2), 0)
68 $(warning Platform ${PLAT}$(TARGET_PLATFORM) is deprecated. \
69 Some of the features might not work as expected)
70 endif
71
72 ifeq ($(shell expr $(TARGET_PLATFORM) \<= 4), 0)
73 $(error TARGET_PLATFORM must be less than or equal to 4)
74 endif
75
76 ifeq ($(filter ${TARGET_FLAVOUR}, fvp fpga),)
77 $(error TARGET_FLAVOUR must be fvp or fpga)
78 endif
79
80 $(eval $(call add_defines, \
81 TARGET_PLATFORM \
82 TARGET_FLAVOUR_$(call uppercase,${TARGET_FLAVOUR}) \
83 TC_RESOLUTION_$(call uppercase,${TC_RESOLUTION}) \
84 TC_DPU_USE_SCMI_CLK \
85 TC_SCMI_PD_CTRL_EN \
86 ))
87
88 CSS_LOAD_SCP_IMAGES := 1
89
90 # Save DSU PMU registers on cluster off and restore them on cluster on
91 PRESERVE_DSU_PMU_REGS := 1
92
93 # Specify MHU type based on platform
94 ifneq ($(filter ${TARGET_PLATFORM}, 2),)
95 PLAT_MHU_VERSION := 2
96 else
97 PLAT_MHU_VERSION := 3
98 endif
99
100 # Include GICv3 driver files
101 include drivers/arm/gic/v3/gicv3.mk
102
103 ENT_GIC_SOURCES := ${GICV3_SOURCES} \
104 plat/common/plat_gicv3.c \
105 plat/arm/common/arm_gicv3.c
106
107 TC_BASE = plat/arm/board/tc
108
109 PLAT_INCLUDES += -I${TC_BASE}/include/ \
110 -I${TC_BASE}/fdts/
111
112 # CPU libraries for TARGET_PLATFORM=1
113 ifeq (${TARGET_PLATFORM}, 1)
114 TC_CPU_SOURCES += lib/cpus/aarch64/cortex_a510.S \
115 lib/cpus/aarch64/cortex_a715.S \
116 lib/cpus/aarch64/cortex_x3.S
117 endif
118
119 # CPU libraries for TARGET_PLATFORM=2
120 ifeq (${TARGET_PLATFORM}, 2)
121 ERRATA_A520_2938996 := 1
122 ERRATA_X4_2726228 := 1
123
124 TC_CPU_SOURCES += lib/cpus/aarch64/cortex_a520.S \
125 lib/cpus/aarch64/cortex_a720.S \
126 lib/cpus/aarch64/cortex_x4.S
127 endif
128
129 # CPU libraries for TARGET_PLATFORM=3
130 ifeq (${TARGET_PLATFORM}, 3)
131 ERRATA_A520_2938996 := 1
132
133 TC_CPU_SOURCES += lib/cpus/aarch64/cortex_a520.S \
134 lib/cpus/aarch64/cortex_a725.S \
135 lib/cpus/aarch64/cortex_x925.S
136 endif
137
138 # CPU libraries for TARGET_PLATFORM=4
139 ifeq (${TARGET_PLATFORM}, 4)
140 TC_CPU_SOURCES += lib/cpus/aarch64/cortex_gelas.S \
141 lib/cpus/aarch64/nevis.S \
142 lib/cpus/aarch64/travis.S
143 endif
144
145 INTERCONNECT_SOURCES := ${TC_BASE}/tc_interconnect.c \
146 plat/arm/common/arm_ni.c
147
148 PLAT_BL_COMMON_SOURCES += ${TC_BASE}/tc_plat.c \
149 ${TC_BASE}/include/tc_helpers.S
150
151 BL1_SOURCES += ${INTERCONNECT_SOURCES} \
152 ${TC_CPU_SOURCES} \
153 ${TC_BASE}/tc_trusted_boot.c \
154 ${TC_BASE}/tc_bl1_setup.c \
155 ${TC_BASE}/tc_err.c \
156 drivers/arm/sbsa/sbsa.c
157
158 BL2_SOURCES += ${TC_BASE}/tc_security.c \
159 ${TC_BASE}/tc_err.c \
160 ${TC_BASE}/tc_trusted_boot.c \
161 ${TC_BASE}/tc_bl2_setup.c \
162 lib/utils/mem_region.c \
163 drivers/arm/tzc/tzc400.c \
164 plat/arm/common/arm_nor_psci_mem_protect.c
165
166 ifeq ($(shell test $(TARGET_PLATFORM) -le 2; echo $$?),0)
167 BL2_SOURCES += plat/arm/common/arm_tzc400.c
168 endif
169
170 BL31_SOURCES += ${INTERCONNECT_SOURCES} \
171 ${TC_CPU_SOURCES} \
172 ${ENT_GIC_SOURCES} \
173 ${TC_BASE}/tc_bl31_setup.c \
174 ${TC_BASE}/tc_topology.c \
175 lib/fconf/fconf.c \
176 lib/fconf/fconf_dyn_cfg_getter.c \
177 drivers/arm/css/dsu/dsu.c \
178 drivers/cfi/v2m/v2m_flash.c \
179 lib/utils/mem_region.c \
180 plat/arm/common/arm_nor_psci_mem_protect.c \
181 drivers/arm/sbsa/sbsa.c
182
183 BL31_SOURCES += ${FDT_WRAPPERS_SOURCES}
184
185 # Add the FDT_SOURCES and options for Dynamic Config
186 FDT_SOURCES += ${TC_BASE}/fdts/${PLAT}_fw_config.dts \
187 ${TC_BASE}/fdts/${PLAT}_tb_fw_config.dts \
188 ${TC_BASE}/fdts/${PLAT}_nt_fw_config.dts
189 FW_CONFIG := ${BUILD_PLAT}/fdts/${PLAT}_fw_config.dtb
190 TB_FW_CONFIG := ${BUILD_PLAT}/fdts/${PLAT}_tb_fw_config.dtb
191 FVP_NT_FW_CONFIG := ${BUILD_PLAT}/fdts/${PLAT}_nt_fw_config.dtb
192
193 # Add the FW_CONFIG to FIP and specify the same to certtool
194 $(eval $(call TOOL_ADD_PAYLOAD,${FW_CONFIG},--fw-config,${FW_CONFIG}))
195 # Add the TB_FW_CONFIG to FIP and specify the same to certtool
196 $(eval $(call TOOL_ADD_PAYLOAD,${TB_FW_CONFIG},--tb-fw-config,${TB_FW_CONFIG}))
197 # Add the NT_FW_CONFIG to FIP and specify the same to certtool
198 $(eval $(call TOOL_ADD_PAYLOAD,${FVP_NT_FW_CONFIG},--nt-fw-config,${FVP_NT_FW_CONFIG}))
199
200 ifeq (${SPD},spmd)
201 ifeq ($(ARM_SPMC_MANIFEST_DTS),)
202 ARM_SPMC_MANIFEST_DTS := ${TC_BASE}/fdts/${PLAT}_spmc_test_manifest.dts
203 endif
204
205 FDT_SOURCES += ${ARM_SPMC_MANIFEST_DTS}
206 TC_TOS_FW_CONFIG := ${BUILD_PLAT}/fdts/$(notdir $(basename ${ARM_SPMC_MANIFEST_DTS})).dtb
207
208 # Add the TOS_FW_CONFIG to FIP and specify the same to certtool
209 $(eval $(call TOOL_ADD_PAYLOAD,${TC_TOS_FW_CONFIG},--tos-fw-config,${TC_TOS_FW_CONFIG}))
210 endif
211
212 #Device tree
213 TC_HW_CONFIG_DTS := fdts/${PLAT}${TARGET_PLATFORM}.dts
214 TC_HW_CONFIG := ${BUILD_PLAT}/fdts/${PLAT}.dtb
215 FDT_SOURCES += ${TC_HW_CONFIG_DTS}
216 $(eval TC_HW_CONFIG := ${BUILD_PLAT}/$(patsubst %.dts,%.dtb,$(TC_HW_CONFIG_DTS)))
217
218 # Add the HW_CONFIG to FIP and specify the same to certtool
219 $(eval $(call TOOL_ADD_PAYLOAD,${TC_HW_CONFIG},--hw-config,${TC_HW_CONFIG}))
220
221 # Include Measured Boot makefile before any Crypto library makefile.
222 # Crypto library makefile may need default definitions of Measured Boot build
223 # flags present in Measured Boot makefile.
224 $(info Including rse_comms.mk)
225 ifeq (${MEASURED_BOOT},1)
226 $(info Including rse_comms.mk)
227 include drivers/arm/rse/rse_comms.mk
228
229 BL1_SOURCES += ${RSE_COMMS_SOURCES}
230 BL2_SOURCES += ${RSE_COMMS_SOURCES}
231 PLAT_INCLUDES += -Iinclude/lib/psa
232
233 ifeq (${DICE_PROTECTION_ENVIRONMENT},1)
234 $(info Including qcbor.mk)
235 include drivers/measured_boot/rse/qcbor.mk
236 $(info Including dice_prot_env.mk)
237 include drivers/measured_boot/rse/dice_prot_env.mk
238
239 BL1_SOURCES += ${QCBOR_SOURCES} \
240 ${DPE_SOURCES} \
241 plat/arm/board/tc/tc_common_dpe.c \
242 plat/arm/board/tc/tc_bl1_dpe.c \
243 lib/psa/dice_protection_environment.c \
244 drivers/arm/css/sds/sds.c \
245 drivers/delay_timer/delay_timer.c \
246 drivers/delay_timer/generic_delay_timer.c
247
248 BL2_SOURCES += ${QCBOR_SOURCES} \
249 ${DPE_SOURCES} \
250 plat/arm/board/tc/tc_common_dpe.c \
251 plat/arm/board/tc/tc_bl2_dpe.c \
252 lib/psa/dice_protection_environment.c
253
254 PLAT_INCLUDES += -I${QCBOR_INCLUDES} \
255 -Iinclude/lib/dice
256 else
257 $(info Including rse_measured_boot.mk)
258 include drivers/measured_boot/rse/rse_measured_boot.mk
259
260 BL1_SOURCES += ${MEASURED_BOOT_SOURCES} \
261 plat/arm/board/tc/tc_common_measured_boot.c \
262 plat/arm/board/tc/tc_bl1_measured_boot.c \
263 lib/psa/measured_boot.c
264
265 BL2_SOURCES += ${MEASURED_BOOT_SOURCES} \
266 plat/arm/board/tc/tc_common_measured_boot.c \
267 plat/arm/board/tc/tc_bl2_measured_boot.c \
268 lib/psa/measured_boot.c
269 endif
270 endif
271
272 ifeq (${TRNG_SUPPORT},1)
273 BL31_SOURCES += plat/arm/board/tc/tc_trng.c
274 endif
275
276 ifneq (${PLATFORM_TEST},)
277 # Add this include as first, before arm_common.mk. This is necessary
278 # because arm_common.mk builds Mbed TLS, and platform_test.mk can
279 # change the list of Mbed TLS files that are to be compiled
280 # (LIBMBEDTLS_SRCS).
281 include plat/arm/board/tc/platform_test.mk
282 endif
283
284
285 include plat/arm/common/arm_common.mk
286 include plat/arm/css/common/css_common.mk
287 include plat/arm/board/common/board_common.mk