Debian Codegraph @

plat/arm/board/n1sdp/platform.mk

raw
1 #
2 # Copyright (c) 2018-2023, Arm Limited. All rights reserved.
3 #
4 # SPDX-License-Identifier: BSD-3-Clause
5 #
6
7
8 N1SDP_BASE := plat/arm/board/n1sdp
9
10 INTERCONNECT_SOURCES := ${N1SDP_BASE}/n1sdp_interconnect.c
11
12 PLAT_INCLUDES := -I${N1SDP_BASE}/include
13
14
15 N1SDP_CPU_SOURCES := lib/cpus/aarch64/neoverse_n1.S
16
17 # Neoverse N1 cores support Armv8.2 extensions
18 ARM_ARCH_MAJOR := 8
19 ARM_ARCH_MINOR := 2
20
21 # GIC-600 configuration
22 GICV3_SUPPORT_GIC600 := 1
23 GICV3_IMPL_GIC600_MULTICHIP := 1
24
25 # Include GICv3 driver files
26 include drivers/arm/gic/v3/gicv3.mk
27
28 N1SDP_GIC_SOURCES := ${GICV3_SOURCES} \
29 plat/common/plat_gicv3.c \
30 plat/arm/common/arm_gicv3.c \
31
32 PLAT_BL_COMMON_SOURCES := ${N1SDP_BASE}/n1sdp_plat.c \
33 ${N1SDP_BASE}/aarch64/n1sdp_helper.S
34
35 BL1_SOURCES := ${N1SDP_CPU_SOURCES} \
36 ${INTERCONNECT_SOURCES} \
37 ${N1SDP_BASE}/n1sdp_err.c \
38 ${N1SDP_BASE}/n1sdp_trusted_boot.c \
39 ${N1SDP_BASE}/n1sdp_bl1_setup.c \
40 drivers/arm/sbsa/sbsa.c
41
42 BL2_SOURCES := ${N1SDP_BASE}/n1sdp_security.c \
43 ${N1SDP_BASE}/n1sdp_err.c \
44 ${N1SDP_BASE}/n1sdp_trusted_boot.c \
45 lib/utils/mem_region.c \
46 ${N1SDP_BASE}/n1sdp_bl2_setup.c \
47 ${N1SDP_BASE}/n1sdp_image_load.c \
48 drivers/arm/css/sds/sds.c
49
50 BL31_SOURCES := ${N1SDP_CPU_SOURCES} \
51 ${INTERCONNECT_SOURCES} \
52 ${N1SDP_GIC_SOURCES} \
53 ${N1SDP_BASE}/n1sdp_bl31_setup.c \
54 ${N1SDP_BASE}/n1sdp_pm.c \
55 ${N1SDP_BASE}/n1sdp_topology.c \
56 ${N1SDP_BASE}/n1sdp_security.c \
57 drivers/arm/css/sds/sds.c
58
59 FDT_SOURCES += fdts/${PLAT}-single-chip.dts \
60 fdts/${PLAT}-multi-chip.dts \
61 ${N1SDP_BASE}/fdts/n1sdp_fw_config.dts \
62 ${N1SDP_BASE}/fdts/n1sdp_tb_fw_config.dts \
63 ${N1SDP_BASE}/fdts/n1sdp_nt_fw_config.dts
64
65 FW_CONFIG := ${BUILD_PLAT}/fdts/n1sdp_fw_config.dtb
66 TB_FW_CONFIG := ${BUILD_PLAT}/fdts/n1sdp_tb_fw_config.dtb
67 NT_FW_CONFIG := ${BUILD_PLAT}/fdts/n1sdp_nt_fw_config.dtb
68
69 # Add the FW_CONFIG to FIP and specify the same to certtool
70 $(eval $(call TOOL_ADD_PAYLOAD,${FW_CONFIG},--fw-config,${FW_CONFIG}))
71 # Add the TB_FW_CONFIG to FIP and specify the same to certtool
72 $(eval $(call TOOL_ADD_PAYLOAD,${TB_FW_CONFIG},--tb-fw-config,${TB_FW_CONFIG}))
73 # Add the NT_FW_CONFIG to FIP and specify the same to certtool
74 $(eval $(call TOOL_ADD_PAYLOAD,${NT_FW_CONFIG},--nt-fw-config,${NT_FW_CONFIG}))
75
76 N1SDP_SPMC_MANIFEST_DTS := ${N1SDP_BASE}/fdts/${PLAT}_optee_spmc_manifest.dts
77 FDT_SOURCES += ${N1SDP_SPMC_MANIFEST_DTS}
78 N1SDP_TOS_FW_CONFIG := ${BUILD_PLAT}/fdts/${PLAT}_optee_spmc_manifest.dtb
79
80 # Add the TOS_FW_CONFIG to FIP and specify the same to certtool
81 $(eval $(call TOOL_ADD_PAYLOAD,${N1SDP_TOS_FW_CONFIG},--tos-fw-config,${N1SDP_TOS_FW_CONFIG}))
82
83 # Setting to 0 as no NVCTR in N1SDP
84 N1SDP_FW_NVCTR_VAL := 0
85 TFW_NVCTR_VAL := ${N1SDP_FW_NVCTR_VAL}
86 NTFW_NVCTR_VAL := ${N1SDP_FW_NVCTR_VAL}
87
88 # Add N1SDP_FW_NVCTR_VAL
89 $(eval $(call add_define,N1SDP_FW_NVCTR_VAL))
90
91 # TF-A not required to load the SCP Images
92 override CSS_LOAD_SCP_IMAGES := 0
93
94 override NEED_BL2U := no
95
96 # 32 bit mode not supported
97 override CTX_INCLUDE_AARCH32_REGS := 0
98
99 override ARM_PLAT_MT := 1
100
101 # Select SCMI/SDS drivers instead of SCPI/BOM driver for communicating with the
102 # SCP during power management operations and for SCP RAM Firmware transfer.
103 CSS_USE_SCMI_SDS_DRIVER := 1
104
105 # System coherency is managed in hardware
106 HW_ASSISTED_COHERENCY := 1
107
108 # When building for systems with hardware-assisted coherency, there's no need to
109 # use USE_COHERENT_MEM. Require that USE_COHERENT_MEM must be set to 0 too.
110 USE_COHERENT_MEM := 0
111
112 # Enable the flag since N1SDP has a system level cache
113 NEOVERSE_Nx_EXTERNAL_LLC := 1
114 include plat/arm/common/arm_common.mk
115 include plat/arm/css/common/css_common.mk
116 include plat/arm/board/common/board_common.mk