| 1 |
# |
| 2 |
# Copyright (c) 2020-2023, Arm Limited. All rights reserved. |
| 3 |
# |
| 4 |
# SPDX-License-Identifier: BSD-3-Clause |
| 5 |
# |
| 6 |
|
| 7 |
# Making sure the Morello platform type is specified |
| 8 |
ifeq ($(filter ${TARGET_PLATFORM}, fvp soc),) |
| 9 |
$(error TARGET_PLATFORM must be fvp or soc) |
| 10 |
endif |
| 11 |
|
| 12 |
MORELLO_BASE := plat/arm/board/morello |
| 13 |
|
| 14 |
INTERCONNECT_SOURCES := ${MORELLO_BASE}/morello_interconnect.c |
| 15 |
|
| 16 |
PLAT_INCLUDES := -I${MORELLO_BASE}/include |
| 17 |
|
| 18 |
MORELLO_CPU_SOURCES := lib/cpus/aarch64/rainier.S |
| 19 |
|
| 20 |
# GIC-600 configuration |
| 21 |
GICV3_SUPPORT_GIC600 := 1 |
| 22 |
|
| 23 |
# Include GICv3 driver files |
| 24 |
include drivers/arm/gic/v3/gicv3.mk |
| 25 |
|
| 26 |
MORELLO_GIC_SOURCES := ${GICV3_SOURCES} \ |
| 27 |
plat/common/plat_gicv3.c \ |
| 28 |
plat/arm/common/arm_gicv3.c \ |
| 29 |
|
| 30 |
PLAT_BL_COMMON_SOURCES := ${MORELLO_BASE}/morello_plat.c \ |
| 31 |
${MORELLO_BASE}/aarch64/morello_helper.S |
| 32 |
|
| 33 |
BL1_SOURCES := ${MORELLO_CPU_SOURCES} \ |
| 34 |
${INTERCONNECT_SOURCES} \ |
| 35 |
${MORELLO_BASE}/morello_err.c \ |
| 36 |
${MORELLO_BASE}/morello_trusted_boot.c \ |
| 37 |
${MORELLO_BASE}/morello_bl1_setup.c \ |
| 38 |
drivers/arm/sbsa/sbsa.c |
| 39 |
|
| 40 |
BL2_SOURCES := ${MORELLO_BASE}/morello_security.c \ |
| 41 |
${MORELLO_BASE}/morello_err.c \ |
| 42 |
${MORELLO_BASE}/morello_trusted_boot.c \ |
| 43 |
${MORELLO_BASE}/morello_bl2_setup.c \ |
| 44 |
${MORELLO_BASE}/morello_image_load.c \ |
| 45 |
lib/utils/mem_region.c \ |
| 46 |
drivers/arm/css/sds/sds.c |
| 47 |
|
| 48 |
BL31_SOURCES := ${MORELLO_CPU_SOURCES} \ |
| 49 |
${INTERCONNECT_SOURCES} \ |
| 50 |
${MORELLO_GIC_SOURCES} \ |
| 51 |
${MORELLO_BASE}/morello_bl31_setup.c \ |
| 52 |
${MORELLO_BASE}/morello_pm.c \ |
| 53 |
${MORELLO_BASE}/morello_topology.c \ |
| 54 |
${MORELLO_BASE}/morello_security.c \ |
| 55 |
drivers/arm/css/sds/sds.c |
| 56 |
|
| 57 |
FDT_SOURCES += fdts/morello-${TARGET_PLATFORM}.dts \ |
| 58 |
${MORELLO_BASE}/fdts/morello_fw_config.dts \ |
| 59 |
${MORELLO_BASE}/fdts/morello_tb_fw_config.dts \ |
| 60 |
${MORELLO_BASE}/fdts/morello_nt_fw_config.dts |
| 61 |
|
| 62 |
FW_CONFIG := ${BUILD_PLAT}/fdts/morello_fw_config.dtb |
| 63 |
HW_CONFIG := ${BUILD_PLAT}/fdts/morello-${TARGET_PLATFORM}.dtb |
| 64 |
TB_FW_CONFIG := ${BUILD_PLAT}/fdts/morello_tb_fw_config.dtb |
| 65 |
NT_FW_CONFIG := ${BUILD_PLAT}/fdts/morello_nt_fw_config.dtb |
| 66 |
|
| 67 |
# Add the FW_CONFIG to FIP and specify the same to certtool |
| 68 |
$(eval $(call TOOL_ADD_PAYLOAD,${FW_CONFIG},--fw-config,${FW_CONFIG})) |
| 69 |
# Add the HW_CONFIG to FIP and specify the same to certtool |
| 70 |
$(eval $(call TOOL_ADD_PAYLOAD,${HW_CONFIG},--hw-config,${HW_CONFIG})) |
| 71 |
# Add the TB_FW_CONFIG to FIP and specify the same to certtool |
| 72 |
$(eval $(call TOOL_ADD_PAYLOAD,${TB_FW_CONFIG},--tb-fw-config,${TB_FW_CONFIG})) |
| 73 |
# Add the NT_FW_CONFIG to FIP and specify the same to certtool |
| 74 |
$(eval $(call TOOL_ADD_PAYLOAD,${NT_FW_CONFIG},--nt-fw-config,${NT_FW_CONFIG})) |
| 75 |
|
| 76 |
MORELLO_FW_NVCTR_VAL := 0 |
| 77 |
TFW_NVCTR_VAL := ${MORELLO_FW_NVCTR_VAL} |
| 78 |
NTFW_NVCTR_VAL := ${MORELLO_FW_NVCTR_VAL} |
| 79 |
|
| 80 |
# TF-A not required to load the SCP Images |
| 81 |
override CSS_LOAD_SCP_IMAGES := 0 |
| 82 |
|
| 83 |
override NEED_BL2U := no |
| 84 |
|
| 85 |
# 32 bit mode not supported |
| 86 |
override CTX_INCLUDE_AARCH32_REGS := 0 |
| 87 |
|
| 88 |
override ARM_PLAT_MT := 1 |
| 89 |
|
| 90 |
override ARM_BL31_IN_DRAM := 1 |
| 91 |
|
| 92 |
override PSCI_EXTENDED_STATE_ID := 1 |
| 93 |
override ARM_RECOM_STATE_ID_ENC := 1 |
| 94 |
|
| 95 |
# Errata workarounds: |
| 96 |
ERRATA_N1_1868343 := 1 |
| 97 |
|
| 98 |
# Select SCMI/SDS drivers instead of SCPI/BOM driver for communicating with the |
| 99 |
# SCP during power management operations and for SCP RAM Firmware transfer. |
| 100 |
CSS_USE_SCMI_SDS_DRIVER := 1 |
| 101 |
|
| 102 |
# System coherency is managed in hardware |
| 103 |
HW_ASSISTED_COHERENCY := 1 |
| 104 |
|
| 105 |
# When building for systems with hardware-assisted coherency, there's no need to |
| 106 |
# use USE_COHERENT_MEM. Require that USE_COHERENT_MEM must be set to 0 too. |
| 107 |
USE_COHERENT_MEM := 0 |
| 108 |
|
| 109 |
# Add TARGET_PLATFORM to differentiate between Morello FVP and Morello SoC platform |
| 110 |
$(eval $(call add_define,TARGET_PLATFORM_$(call uppercase,${TARGET_PLATFORM}))) |
| 111 |
|
| 112 |
# Add MORELLO_FW_NVCTR_VAL |
| 113 |
$(eval $(call add_define,MORELLO_FW_NVCTR_VAL)) |
| 114 |
|
| 115 |
include plat/arm/common/arm_common.mk |
| 116 |
include plat/arm/css/common/css_common.mk |
| 117 |
include plat/arm/board/common/board_common.mk |