Debian Codegraph @

plat/arm/board/fvp_ve/include/platform_def.h

raw
1 /*
2 * Copyright (c) 2019-2024, Arm Limited. All rights reserved.
3 *
4 * SPDX-License-Identifier: BSD-3-Clause
5 */
6
7 #ifndef PLATFORM_DEF_H
8 #define PLATFORM_DEF_H
9
10 #include <common/tbbr/tbbr_img_def.h>
11 #include <lib/utils_def.h>
12 #include <lib/xlat_tables/xlat_tables_defs.h>
13 #include <plat/arm/board/common/v2m_def.h>
14 #include <plat/arm/common/smccc_def.h>
15 #include <plat/common/common_def.h>
16
17 #include "../fvp_ve_def.h"
18
19 #define ARM_CACHE_WRITEBACK_SHIFT 6
20
21 /* Memory location options for TSP */
22 #define ARM_DRAM_ID 2
23
24 #define ARM_DRAM1_BASE UL(0x80000000)
25 #define ARM_DRAM1_SIZE UL(0x80000000)
26 #define ARM_DRAM1_END (ARM_DRAM1_BASE + \
27 ARM_DRAM1_SIZE - 1)
28
29 #define ARM_DRAM2_BASE PLAT_ARM_DRAM2_BASE
30 #define ARM_DRAM2_SIZE PLAT_ARM_DRAM2_SIZE
31 #define ARM_DRAM2_END (ARM_DRAM2_BASE + \
32 ARM_DRAM2_SIZE - 1)
33
34 #define ARM_NS_DRAM1_BASE ARM_DRAM1_BASE
35 /*
36 * The last 2MB is meant to be NOLOAD and will not be zero
37 * initialized.
38 */
39 #define ARM_NS_DRAM1_SIZE (ARM_DRAM1_SIZE - \
40 0x00200000)
41
42
43 /* The first 4KB of NS DRAM1 are used as shared memory */
44 #define FVP_VE_SHARED_RAM_BASE ARM_NS_DRAM1_BASE
45 #define FVP_VE_SHARED_RAM_SIZE UL(0x00001000) /* 4 KB */
46
47 /* The next 252 kB of NS DRAM is used to load the BL images */
48 #define ARM_BL_RAM_BASE (FVP_VE_SHARED_RAM_BASE + \
49 FVP_VE_SHARED_RAM_SIZE)
50 #define ARM_BL_RAM_SIZE (PLAT_ARM_BL_PLUS_SHARED_RAM_SIZE - \
51 FVP_VE_SHARED_RAM_SIZE)
52
53
54 #define ARM_IRQ_SEC_PHY_TIMER 29
55
56 #define ARM_IRQ_SEC_SGI_0 8
57 #define ARM_IRQ_SEC_SGI_1 9
58 #define ARM_IRQ_SEC_SGI_2 10
59 #define ARM_IRQ_SEC_SGI_3 11
60 #define ARM_IRQ_SEC_SGI_4 12
61 #define ARM_IRQ_SEC_SGI_5 13
62 #define ARM_IRQ_SEC_SGI_6 14
63 #define ARM_IRQ_SEC_SGI_7 15
64
65 /*
66 * Define a list of Group 1 Secure and Group 0 interrupt properties as per GICv3
67 * terminology. On a GICv2 system or mode, the lists will be merged and treated
68 * as Group 0 interrupts.
69 */
70 #define ARM_G1S_IRQ_PROPS(grp) \
71 INTR_PROP_DESC(ARM_IRQ_SEC_PHY_TIMER, GIC_HIGHEST_SEC_PRIORITY, (grp), \
72 GIC_INTR_CFG_LEVEL), \
73 INTR_PROP_DESC(ARM_IRQ_SEC_SGI_1, GIC_HIGHEST_SEC_PRIORITY, (grp), \
74 GIC_INTR_CFG_EDGE), \
75 INTR_PROP_DESC(ARM_IRQ_SEC_SGI_2, GIC_HIGHEST_SEC_PRIORITY, (grp), \
76 GIC_INTR_CFG_EDGE), \
77 INTR_PROP_DESC(ARM_IRQ_SEC_SGI_3, GIC_HIGHEST_SEC_PRIORITY, (grp), \
78 GIC_INTR_CFG_EDGE), \
79 INTR_PROP_DESC(ARM_IRQ_SEC_SGI_4, GIC_HIGHEST_SEC_PRIORITY, (grp), \
80 GIC_INTR_CFG_EDGE), \
81 INTR_PROP_DESC(ARM_IRQ_SEC_SGI_5, GIC_HIGHEST_SEC_PRIORITY, (grp), \
82 GIC_INTR_CFG_EDGE), \
83 INTR_PROP_DESC(ARM_IRQ_SEC_SGI_7, GIC_HIGHEST_SEC_PRIORITY, (grp), \
84 GIC_INTR_CFG_EDGE)
85
86 #define ARM_G0_IRQ_PROPS(grp) \
87 INTR_PROP_DESC(ARM_IRQ_SEC_SGI_6, GIC_HIGHEST_SEC_PRIORITY, (grp), \
88 GIC_INTR_CFG_EDGE)
89
90 #define ARM_MAP_SHARED_RAM MAP_REGION_FLAT( \
91 FVP_VE_SHARED_RAM_BASE, \
92 FVP_VE_SHARED_RAM_SIZE, \
93 MT_DEVICE | MT_RW | MT_SECURE)
94
95 #define ARM_MAP_NS_DRAM1 MAP_REGION_FLAT( \
96 ARM_NS_DRAM1_BASE, \
97 ARM_NS_DRAM1_SIZE, \
98 MT_MEMORY | MT_RW | MT_NS)
99
100 #define ARM_MAP_DRAM2 MAP_REGION_FLAT( \
101 ARM_DRAM2_BASE, \
102 ARM_DRAM2_SIZE, \
103 MT_MEMORY | MT_RW | MT_NS)
104
105 #define ARM_MAP_BL_RO MAP_REGION_FLAT( \
106 BL_CODE_BASE, \
107 BL_CODE_END - BL_CODE_BASE, \
108 MT_CODE | MT_SECURE), \
109 MAP_REGION_FLAT( \
110 BL_RO_DATA_BASE, \
111 BL_RO_DATA_END \
112 - BL_RO_DATA_BASE, \
113 MT_RO_DATA | MT_SECURE)
114
115 #if USE_COHERENT_MEM
116 #define ARM_MAP_BL_COHERENT_RAM MAP_REGION_FLAT( \
117 BL_COHERENT_RAM_BASE, \
118 BL_COHERENT_RAM_END \
119 - BL_COHERENT_RAM_BASE, \
120 MT_DEVICE | MT_RW | MT_SECURE)
121 #endif
122
123 /*
124 * Map the region for device tree configuration with read and write permissions
125 */
126 #define ARM_MAP_BL_CONFIG_REGION MAP_REGION_FLAT(ARM_BL_RAM_BASE, \
127 (ARM_FW_CONFIGS_LIMIT \
128 - ARM_BL_RAM_BASE), \
129 MT_MEMORY | MT_RW | MT_SECURE)
130
131
132 /*
133 * The max number of regions like RO(code), coherent and data required by
134 * different BL stages which need to be mapped in the MMU.
135 */
136 #define ARM_BL_REGIONS 6
137
138 #define MAX_MMAP_REGIONS (PLAT_ARM_MMAP_ENTRIES + \
139 ARM_BL_REGIONS)
140
141 /* Memory mapped Generic timer interfaces */
142 #define FVP_VE_TIMER_BASE_FREQUENCY UL(24000000)
143 #define ARM_SYS_CNTREAD_BASE UL(0x2a800000)
144 #define ARM_SYS_CNT_BASE_S UL(0x2a820000)
145 #define ARM_SYS_CNT_BASE_NS UL(0x2a830000)
146
147 #define ARM_CONSOLE_BAUDRATE 115200
148
149 /* Trusted Watchdog constants */
150 #define ARM_SP805_TWDG_BASE UL(0x1C0F0000)
151 #define ARM_SP805_TWDG_CLK_HZ 32768
152 /* The TBBR document specifies a watchdog timeout of 256 seconds. SP805
153 * asserts reset after two consecutive countdowns (2 x 128 = 256 sec) */
154 #define ARM_TWDG_TIMEOUT_SEC 128
155 #define ARM_TWDG_LOAD_VAL (ARM_SP805_TWDG_CLK_HZ * \
156 ARM_TWDG_TIMEOUT_SEC)
157
158 #define PLAT_PHY_ADDR_SPACE_SIZE (1ULL << 32)
159 #define PLAT_VIRT_ADDR_SPACE_SIZE (1ULL << 32)
160
161 /* Define memory configuration for device tree files. */
162 #define PLAT_ARM_HW_CONFIG_SIZE U(0x01000000)
163
164 /*
165 * This macro defines the deepest retention state possible. A higher state
166 * id will represent an invalid or a power down state.
167 */
168 #define PLAT_MAX_RET_STATE 1
169
170 /*
171 * This macro defines the deepest power down states possible. Any state ID
172 * higher than this is invalid.
173 */
174 #define PLAT_MAX_OFF_STATE 2
175
176 /*
177 * Some data must be aligned on the biggest cache line size in the platform.
178 * This is known only to the platform as it might have a combination of
179 * integrated and external caches.
180 */
181 #define CACHE_WRITEBACK_GRANULE (U(1) << ARM_CACHE_WRITEBACK_SHIFT)
182
183 /*
184 * To enable FW_CONFIG to be loaded by BL1, define the corresponding base
185 * and limit. Leave enough space of BL2 meminfo.
186 */
187 #define ARM_FW_CONFIG_BASE (ARM_BL_RAM_BASE + sizeof(meminfo_t))
188 #define ARM_FW_CONFIG_LIMIT ((ARM_BL_RAM_BASE + PAGE_SIZE) \
189 + (PAGE_SIZE / 2U))
190
191 /*
192 * Define limit of firmware configuration memory:
193 * ARM_FW_CONFIG + ARM_BL2_MEM_DESC memory
194 */
195 #define ARM_FW_CONFIGS_LIMIT (ARM_BL_RAM_BASE + (PAGE_SIZE * 2))
196
197 /*******************************************************************************
198 * BL1 specific defines.
199 * BL1 RW data is relocated from ROM to RAM at runtime so we need 2 sets of
200 * addresses.
201 ******************************************************************************/
202 #define BL1_RO_BASE 0x00000000
203 #define BL1_RO_LIMIT PLAT_ARM_TRUSTED_ROM_SIZE
204 /*
205 * Put BL1 RW at the top of the memory allocated for BL images in NS DRAM.
206 */
207 #define BL1_RW_BASE (ARM_BL_RAM_BASE + \
208 ARM_BL_RAM_SIZE - \
209 (PLAT_ARM_MAX_BL1_RW_SIZE))
210 #define BL1_RW_LIMIT (ARM_BL_RAM_BASE + \
211 (ARM_BL_RAM_SIZE))
212
213
214 /*******************************************************************************
215 * BL2 specific defines.
216 ******************************************************************************/
217
218 /*
219 * Put BL2 just below BL1.
220 */
221 #define BL2_BASE (BL1_RW_BASE - FVP_VE_MAX_BL2_SIZE)
222 #define BL2_LIMIT BL1_RW_BASE
223
224
225 /* Put BL32 below BL2 in NS DRAM.*/
226 #define ARM_BL2_MEM_DESC_BASE ARM_FW_CONFIG_LIMIT
227 #define ARM_BL2_MEM_DESC_LIMIT (ARM_BL2_MEM_DESC_BASE \
228 + (PAGE_SIZE / 2U))
229
230 #define BL32_BASE ((ARM_BL_RAM_BASE + ARM_BL_RAM_SIZE)\
231 - PLAT_ARM_MAX_BL32_SIZE)
232 #define BL32_PROGBITS_LIMIT BL2_BASE
233 #define BL32_LIMIT (ARM_BL_RAM_BASE + ARM_BL_RAM_SIZE)
234
235 /* Required platform porting definitions */
236 #define PLATFORM_CORE_COUNT FVP_VE_CLUSTER_COUNT
237 #define PLAT_NUM_PWR_DOMAINS ((FVP_VE_CLUSTER_COUNT + \
238 PLATFORM_CORE_COUNT) + U(1))
239
240 #define PLAT_MAX_PWR_LVL 2
241
242 /*
243 * Other platform porting definitions are provided by included headers
244 */
245
246 /*
247 * Required ARM standard platform porting definitions
248 */
249
250 #define PLAT_ARM_BL_PLUS_SHARED_RAM_SIZE 0x00040000 /* 256 KB */
251
252 #define PLAT_ARM_TRUSTED_ROM_BASE 0x00000000
253 #define PLAT_ARM_TRUSTED_ROM_SIZE 0x04000000 /* 64 MB */
254
255 #define PLAT_ARM_DRAM2_BASE ULL(0x880000000)
256 #define PLAT_ARM_DRAM2_SIZE ULL(0x80000000)
257
258 /*
259 * Load address of BL33 for this platform port
260 */
261 #define PLAT_ARM_NS_IMAGE_BASE (ARM_DRAM1_BASE + U(0x8000000))
262
263 /*
264 * PLAT_ARM_MMAP_ENTRIES depends on the number of entries in the
265 * plat_arm_mmap array defined for each BL stage.
266 */
267 #if defined(IMAGE_BL32)
268 # define PLAT_ARM_MMAP_ENTRIES 8
269 # define MAX_XLAT_TABLES 6
270 #else
271 # define PLAT_ARM_MMAP_ENTRIES 12
272 # define MAX_XLAT_TABLES 6
273 #endif
274
275 /*
276 * PLAT_ARM_MAX_BL1_RW_SIZE is calculated using the current BL1 RW debug size
277 * plus a little space for growth.
278 */
279 #define PLAT_ARM_MAX_BL1_RW_SIZE 0xB000
280
281 /*
282 * FVP_VE_MAX_BL2_SIZE is calculated using the current BL2 debug size plus a
283 * little space for growth.
284 */
285 #define FVP_VE_MAX_BL2_SIZE 0x11000
286
287 /*
288 * Since BL32 NOBITS overlays BL2 and BL1-RW, PLAT_ARM_MAX_BL32_SIZE is
289 * calculated using the current SP_MIN PROGBITS debug size plus the sizes of
290 * BL2 and BL1-RW
291 */
292 #define PLAT_ARM_MAX_BL32_SIZE 0x3B000
293 /*
294
295 * Size of cacheable stacks
296 */
297 #if defined(IMAGE_BL1)
298 # define PLATFORM_STACK_SIZE 0x440
299 #elif defined(IMAGE_BL2)
300 # define PLATFORM_STACK_SIZE 0x400
301 #elif defined(IMAGE_BL32)
302 # define PLATFORM_STACK_SIZE 0x440
303 #endif
304
305 #define MAX_IO_DEVICES 3
306 #define MAX_IO_HANDLES 4
307
308 /* Reserve the last block of flash for PSCI MEM PROTECT flag */
309 #define PLAT_ARM_FLASH_IMAGE_BASE V2M_FLASH1_BASE
310 #define PLAT_ARM_FLASH_IMAGE_MAX_SIZE (V2M_FLASH1_SIZE - V2M_FLASH_BLOCK_SIZE)
311
312 #define PLAT_ARM_NVM_BASE V2M_FLASH1_BASE
313 #define PLAT_ARM_NVM_SIZE (V2M_FLASH1_SIZE - V2M_FLASH_BLOCK_SIZE)
314
315 /*
316 * PL011 related constants
317 */
318 #define PLAT_ARM_BOOT_UART_BASE V2M_IOFPGA_UART0_BASE
319 #define PLAT_ARM_BOOT_UART_CLK_IN_HZ V2M_IOFPGA_UART0_CLK_IN_HZ
320
321 #define PLAT_ARM_RUN_UART_BASE V2M_IOFPGA_UART1_BASE
322 #define PLAT_ARM_RUN_UART_CLK_IN_HZ V2M_IOFPGA_UART1_CLK_IN_HZ
323
324 #define PLAT_ARM_CRASH_UART_BASE PLAT_ARM_RUN_UART_BASE
325 #define PLAT_ARM_CRASH_UART_CLK_IN_HZ PLAT_ARM_RUN_UART_CLK_IN_HZ
326
327 /* System timer related constants */
328 #define PLAT_ARM_NSTIMER_FRAME_ID 1
329
330 /* Mailbox base address */
331 #define FVP_VE_TRUSTED_MAILBOX_BASE FVP_VE_SHARED_RAM_BASE
332
333 /*
334 * GIC related constants to cater for GICv2
335 */
336 #define PLAT_ARM_GICD_BASE VE_GICD_BASE
337 #define PLAT_ARM_GICC_BASE VE_GICC_BASE
338
339 /*
340 * Define a list of Group 1 Secure and Group 0 interrupts as per GICv3
341 * terminology. On a GICv2 system or mode, the lists will be merged and treated
342 * as Group 0 interrupts.
343 */
344 #define PLAT_ARM_G1S_IRQ_PROPS(grp) \
345 ARM_G1S_IRQ_PROPS(grp), \
346 INTR_PROP_DESC(FVP_VE_IRQ_TZ_WDOG, GIC_HIGHEST_SEC_PRIORITY, (grp), \
347 GIC_INTR_CFG_LEVEL), \
348 INTR_PROP_DESC(FVP_VE_IRQ_SEC_SYS_TIMER, GIC_HIGHEST_SEC_PRIORITY, (grp), \
349 GIC_INTR_CFG_LEVEL)
350
351 #define PLAT_ARM_G0_IRQ_PROPS(grp) ARM_G0_IRQ_PROPS(grp)
352
353 /*
354 * Physical and virtual address space limits for MMU in AARCH64 & AARCH32 modes
355 */
356 #ifdef __aarch64__
357 #define PLAT_PHY_ADDR_SPACE_SIZE (1ULL << 36)
358 #define PLAT_VIRT_ADDR_SPACE_SIZE (1ULL << 36)
359 #else
360 #define PLAT_PHY_ADDR_SPACE_SIZE (1ULL << 32)
361 #define PLAT_VIRT_ADDR_SPACE_SIZE (1ULL << 32)
362 #endif
363
364 #endif /* PLATFORM_H */