Debian Codegraph @

include/plat/nuvoton/common/npcm845x_arm_def.h

raw
1 /*
2 * Copyright (c) 2015-2023, ARM Limited and Contributors. All rights reserved.
3 *
4 * Copyright (C) 2017-2023 Nuvoton Ltd.
5 *
6 * SPDX-License-Identifier: BSD-3-Clause
7 */
8
9 #ifndef NPCM845x_ARM_DEF_H
10 #define NPCM845x_ARM_DEF_H
11
12 #include <arch.h>
13 #include <common/interrupt_props.h>
14 #include <common/tbbr/tbbr_img_def.h>
15 #include <drivers/arm/gic_common.h>
16 #include <lib/utils_def.h>
17 #include <lib/xlat_tables/xlat_tables_defs.h>
18 #include <plat/arm/common/smccc_def.h>
19 #include <plat/common/common_def.h>
20
21 /* This flag will add zones to the MMU so that it will be possible to debug */
22 #ifdef NPCM845X_DEBUG
23 #define ALLOW_DEBUG_MMU
24 #undef ALLOW_DEBUG_MMU
25 #endif /* NPCM845X_DEBUG */
26
27 #undef CONFIG_TARGET_ARBEL_PALLADIUM
28 /******************************************************************************
29 * Definitions common to all ARM standard platforms
30 *****************************************************************************/
31
32 /*
33 * Root of trust key hash lengths
34 */
35 #define ARM_ROTPK_HEADER_LEN 19
36 #define ARM_ROTPK_HASH_LEN 32
37
38 /* Special value used to verify platform parameters from BL2 to BL31 */
39 #define ARM_BL31_PLAT_PARAM_VAL ULL(0x0f1e2d3c4b5a6978)
40
41 /* No need for system because we have only one cluster */
42 #define ARM_SYSTEM_COUNT U(0)
43
44 #define ARM_CACHE_WRITEBACK_SHIFT 6
45
46 /*
47 * Macros mapping the MPIDR Affinity levels to ARM Platform Power levels.
48 * The power levels have a 1:1 mapping with the MPIDR affinity levels.
49 */
50 /* In NPCM845x - refers to cores */
51 #define ARM_PWR_LVL0 MPIDR_AFFLVL0
52
53 /* In NPCM845x - refers to cluster */
54 #define ARM_PWR_LVL1 MPIDR_AFFLVL1
55
56 /* No need for additional settings because the platform doesn't have system */
57
58 /*
59 * Macros for local power states in ARM platforms encoded by State-ID field
60 * within the power-state parameter.
61 */
62 #define NPCM845x_PLAT_PRIMARY_CPU U(0x0)
63 #define NPCM845x_CLUSTER_COUNT U(1)
64
65 #ifdef SECONDARY_BRINGUP
66 #define NPCM845x_MAX_CPU_PER_CLUSTER U(2)
67 #define NPCM845x_PLATFORM_CORE_COUNT U(2)
68 #define NPCM845x_PLATFORM_CLUSTER0_CORE_COUNT U(2)
69 #else
70 #define NPCM845x_MAX_CPU_PER_CLUSTER U(4)
71 #define NPCM845x_PLATFORM_CORE_COUNT U(4)
72 #define NPCM845x_PLATFORM_CLUSTER0_CORE_COUNT U(4)
73 #endif /* SECONDARY_BRINGUP */
74
75 #define NPCM845x_SYSTEM_COUNT U(0)
76
77 /* Memory mapping for NPCM845x */
78 #define NPCM845x_REG_BASE 0xf0000000
79 #define NPCM845x_REG_SIZE 0x0ff16000
80
81 /*
82 * DRAM
83 * 0x3fffffff +-------------+
84 * | BL33 | (non-secure)
85 * 0x06200000 +-------------+
86 * | BL32 SHARED | (non-secure)
87 * 0x06000000 +-------------+
88 * | BL32 | (secure)
89 * 0x02100000 +-------------+
90 * | BL31 | (secure)
91 * 0x02000000 +-------------+
92 * | | (non-secure)
93 * 0x00000000 +-------------+
94 *
95 * Trusted ROM
96 * 0xfff50000 +-------------+
97 * | BL1 (ro) |
98 * 0xfff40000 +-------------+
99 */
100
101 #define ARM_DRAM1_BASE ULL(0x00000000)
102 #ifndef CONFIG_TARGET_ARBEL_PALLADIUM
103 /*
104 * Although npcm845x is 4G,
105 * consider only 2G Trusted Firmware memory allocation
106 */
107 #define ARM_DRAM1_SIZE ULL(0x37000000)
108 #else
109 #define ARM_DRAM1_SIZE ULL(0x10000000)
110 #define ARM_DRAM1_END (ARM_DRAM1_BASE + ARM_DRAM1_SIZE - 1U)
111 #endif /* CONFIG_TARGET_ARBEL_PALLADIUM */
112
113 /*
114 * The top 16MB of DRAM1 is configured as secure access only using the TZC
115 * - SCP TZC DRAM: If present, DRAM reserved for SCP use
116 * - AP TZC DRAM: The remaining TZC secured DRAM reserved for AP use
117 */
118
119 /* Check for redundancy */
120 #ifdef NPCM845X_DEBUG
121 #define PLAT_ARM_NS_IMAGE_BASE 0x0
122 #endif /* NPCM845X_DEBUG */
123
124 #define ARM_TZC_DRAM1_SIZE UL(0x01000000)
125 #define ARM_SCP_TZC_DRAM1_SIZE PLAT_ARM_SCP_TZC_DRAM1_SIZE
126 #define ARM_SCP_TZC_DRAM1_END (ARM_SCP_TZC_DRAM1_BASE + \
127 ARM_SCP_TZC_DRAM1_SIZE - 1U)
128
129 /*
130 * Define a 2MB region within the TZC secured DRAM for use by EL3 runtime
131 * firmware. This region is meant to be NOLOAD and will not be zero
132 * initialized. Data sections with the attribute `arm_el3_tzc_dram`
133 * will be placed here.
134 *
135 * NPCM845x - Currently the platform doesn't have EL3 implementation
136 * on secured DRAM.
137 */
138 #define ARM_EL3_TZC_DRAM1_BASE (ARM_SCP_TZC_DRAM1_BASE - \
139 ARM_EL3_TZC_DRAM1_SIZE)
140 #define ARM_EL3_TZC_DRAM1_SIZE UL(0x00200000) /* 2 MB */
141 #define ARM_EL3_TZC_DRAM1_END (ARM_EL3_TZC_DRAM1_BASE + \
142 ARM_EL3_TZC_DRAM1_SIZE - 1U)
143
144 #define ARM_AP_TZC_DRAM1_BASE 0x02100000
145 #define ARM_AP_TZC_DRAM1_SIZE (ARM_TZC_DRAM1_SIZE - \
146 (ARM_SCP_TZC_DRAM1_SIZE + \
147 ARM_EL3_TZC_DRAM1_SIZE))
148 #define ARM_AP_TZC_DRAM1_END (ARM_AP_TZC_DRAM1_BASE + \
149 ARM_AP_TZC_DRAM1_SIZE - 1U)
150
151 /* Define the Access permissions for Secure peripherals to NS_DRAM */
152 #if ARM_CRYPTOCELL_INTEG
153 /*
154 * Allow Secure peripheral to read NS DRAM when integrated with CryptoCell.
155 * This is required by CryptoCell to authenticate BL33 which is loaded
156 * into the Non Secure DDR.
157 */
158 #define ARM_TZC_NS_DRAM_S_ACCESS TZC_REGION_S_RD
159 #else
160 #define ARM_TZC_NS_DRAM_S_ACCESS TZC_REGION_S_NONE
161 #endif /* ARM_CRYPTOCELL_INTEG */
162
163 #ifdef SPD_opteed
164 /*
165 * BL2 needs to map 4MB at the end of TZC_DRAM1 in order to
166 * load/authenticate the trusted os extra image. The first 512KB of
167 * TZC_DRAM1 are reserved for trusted os (OPTEE). The extra image loading
168 * for OPTEE is paged image which only include the paging part using
169 * virtual memory but without "init" data. OPTEE will copy the "init" data
170 * (from pager image) to the first 512KB of TZC_DRAM, and then copy the
171 * extra image behind the "init" data.
172 */
173 #define TSP_SEC_MEM_BASE ARM_AP_TZC_DRAM1_BASE
174 #define TSP_SEC_MEM_SIZE ARM_AP_TZC_DRAM1_SIZE
175 #define BL32_BASE ARM_AP_TZC_DRAM1_BASE
176 #define BL32_LIMIT (ARM_AP_TZC_DRAM1_BASE + \
177 ARM_AP_TZC_DRAM1_SIZE)
178
179 #define ARM_OPTEE_PAGEABLE_LOAD_BASE ( \
180 ARM_AP_TZC_DRAM1_BASE + ARM_AP_TZC_DRAM1_SIZE - \
181 ARM_OPTEE_PAGEABLE_LOAD_SIZE)
182 #define ARM_OPTEE_PAGEABLE_LOAD_SIZE UL(0x400000)
183 #define ARM_OPTEE_PAGEABLE_LOAD_MEM MAP_REGION_FLAT( \
184 ARM_OPTEE_PAGEABLE_LOAD_BASE, \
185 ARM_OPTEE_PAGEABLE_LOAD_SIZE, \
186 MT_MEMORY | MT_RW | MT_SECURE)
187
188 /*
189 * Map the memory for the OP-TEE core (also known as OP-TEE pager
190 * when paging support is enabled).
191 */
192 #define ARM_MAP_OPTEE_CORE_MEM MAP_REGION_FLAT( \
193 BL32_BASE, BL32_LIMIT - BL32_BASE, \
194 MT_MEMORY | MT_RW | MT_SECURE)
195 #endif /* SPD_opteed */
196
197 #define ARM_NS_DRAM1_BASE ARM_DRAM1_BASE
198 #define ARM_NS_DRAM1_SIZE (ARM_DRAM1_SIZE - \
199 ARM_TZC_DRAM1_SIZE)
200 #define ARM_NS_DRAM1_END (ARM_NS_DRAM1_BASE + \
201 ARM_NS_DRAM1_SIZE - 1U)
202
203 /* The platform doesn't use DRAM2 but it has to have a value for calculation */
204 #define ARM_DRAM2_BASE 0 /* PLAT_ARM_DRAM_BASE */
205 #define ARM_DRAM2_SIZE 1 /* PLAT_ARM_DRAM_SIZE */
206 #define ARM_DRAM2_END (ARM_DRAM2_BASE + ARM_DRAM2_SIZE - 1U)
207
208 #define FIRST_EXT_INTERRUPT_NUM U(32)
209 #define ARM_IRQ_SEC_PHY_TIMER (U(29) + FIRST_EXT_INTERRUPT_NUM)
210
211 #define ARM_IRQ_SEC_SGI_0 8
212 #define ARM_IRQ_SEC_SGI_1 9
213 #define ARM_IRQ_SEC_SGI_2 10
214 #define ARM_IRQ_SEC_SGI_3 11
215 #define ARM_IRQ_SEC_SGI_4 12
216 #define ARM_IRQ_SEC_SGI_5 13
217 #define ARM_IRQ_SEC_SGI_6 14
218 #define ARM_IRQ_SEC_SGI_7 15
219
220 /*
221 * Define a list of Group 1 Secure and Group 0 interrupt properties
222 * as per GICv3 terminology. On a GICv2 system or mode,
223 * the lists will be merged and treated as Group 0 interrupts.
224 */
225 #define ARM_G1S_IRQ_PROPS(grp) \
226 INTR_PROP_DESC(ARM_IRQ_SEC_PHY_TIMER, \
227 GIC_HIGHEST_SEC_PRIORITY, (grp), GIC_INTR_CFG_LEVEL), \
228 INTR_PROP_DESC(ARM_IRQ_SEC_SGI_1, \
229 GIC_HIGHEST_SEC_PRIORITY, (grp), GIC_INTR_CFG_EDGE), \
230 INTR_PROP_DESC(ARM_IRQ_SEC_SGI_2, \
231 GIC_HIGHEST_SEC_PRIORITY, (grp), GIC_INTR_CFG_EDGE), \
232 INTR_PROP_DESC(ARM_IRQ_SEC_SGI_3, \
233 GIC_HIGHEST_SEC_PRIORITY, (grp), GIC_INTR_CFG_EDGE), \
234 INTR_PROP_DESC(ARM_IRQ_SEC_SGI_4, \
235 GIC_HIGHEST_SEC_PRIORITY, (grp), GIC_INTR_CFG_EDGE), \
236 INTR_PROP_DESC(ARM_IRQ_SEC_SGI_5, \
237 GIC_HIGHEST_SEC_PRIORITY, (grp), GIC_INTR_CFG_EDGE), \
238 INTR_PROP_DESC(ARM_IRQ_SEC_SGI_7, \
239 GIC_HIGHEST_SEC_PRIORITY, (grp), GIC_INTR_CFG_EDGE)
240
241 #define ARM_G0_IRQ_PROPS(grp) \
242 INTR_PROP_DESC(ARM_IRQ_SEC_SGI_0, \
243 PLAT_SDEI_NORMAL_PRI, (grp), GIC_INTR_CFG_EDGE), \
244 INTR_PROP_DESC(ARM_IRQ_SEC_SGI_6, \
245 GIC_HIGHEST_SEC_PRIORITY, (grp), GIC_INTR_CFG_EDGE)
246
247 #define ARM_MAP_SHARED_RAM MAP_REGION_FLAT( \
248 ARM_SHARED_RAM_BASE, ARM_SHARED_RAM_SIZE, \
249 MT_DEVICE | MT_RW | MT_SECURE)
250
251 #ifdef ALLOW_DEBUG_MMU
252 /* In order to be able to debug,
253 * the platform needs to add BL33 and BL32 to MMU as well.
254 */
255 #define ARM_MAP_NS_DRAM1 MAP_REGION_FLAT( \
256 ARM_NS_DRAM1_BASE, ARM_NS_DRAM1_SIZE, \
257 MT_MEMORY | MT_RW | MT_NS)
258
259 #ifdef BL32_BASE
260 #define ARM_MAP_BL32_CORE_MEM MAP_REGION_FLAT( \
261 BL32_BASE, BL32_LIMIT - BL32_BASE, \
262 MT_MEMORY | MT_RW | MT_SECURE)
263 #endif /* BL32_BASE */
264
265 #ifdef NPCM845X_DEBUG
266 #define ARM_MAP_SEC_BB_MEM MAP_REGION_FLAT( \
267 0xFFFB0000, 0x20000, \
268 MT_MEMORY | MT_RW | MT_NS)
269 #endif /* NPCM845X_DEBUG */
270 #endif /* BL32_BASE */
271
272 #define ARM_MAP_DRAM2 MAP_REGION_FLAT( \
273 ARM_DRAM2_BASE, ARM_DRAM2_SIZE, \
274 MT_MEMORY | MT_RW | MT_NS)
275
276 #define ARM_MAP_TSP_SEC_MEM MAP_REGION_FLAT( \
277 TSP_SEC_MEM_BASE, TSP_SEC_MEM_SIZE, \
278 MT_MEMORY | MT_RW | MT_SECURE)
279
280 #if ARM_BL31_IN_DRAM
281 #define ARM_MAP_BL31_SEC_DRAM MAP_REGION_FLAT( \
282 BL31_BASE, PLAT_ARM_MAX_BL31_SIZE, \
283 MT_MEMORY | MT_RW | MT_SECURE)
284 #endif /* ARM_BL31_IN_DRAM */
285
286 /* Currently the platform doesn't have EL3 implementation on secured DRAM. */
287 #define ARM_MAP_EL3_TZC_DRAM MAP_REGION_FLAT( \
288 ARM_EL3_TZC_DRAM1_BASE, \
289 ARM_EL3_TZC_DRAM1_SIZE, \
290 MT_MEMORY | MT_RW | MT_SECURE)
291
292 #if defined(SPD_spmd)
293 #define ARM_MAP_TRUSTED_DRAM MAP_REGION_FLAT( \
294 PLAT_ARM_TRUSTED_DRAM_BASE, \
295 PLAT_ARM_TRUSTED_DRAM_SIZE, \
296 MT_MEMORY | MT_RW | MT_SECURE)
297 #endif /* SPD_spmd */
298
299 /*
300 * Mapping for the BL1 RW region. This mapping is needed by BL2
301 * in order to share the Mbed TLS heap. Since the heap is allocated
302 * inside BL1, it resides in the BL1 RW region. Hence, BL2 needs access
303 * to the BL1 RW region in order to be able to access the heap.
304 */
305 #define ARM_MAP_BL1_RW MAP_REGION_FLAT( \
306 BL1_RW_BASE, BL1_RW_LIMIT - BL1_RW_BASE, \
307 MT_MEMORY | MT_RW | EL3_PAS)
308
309 /*
310 * If SEPARATE_CODE_AND_RODATA=1 the platform will define a region
311 * for each section, otherwise one region containing both sections
312 * is defined.
313 */
314 #if SEPARATE_CODE_AND_RODATA
315 #define ARM_MAP_BL_RO MAP_REGION_FLAT( \
316 BL_CODE_BASE, BL_CODE_END - BL_CODE_BASE, \
317 MT_CODE | EL3_PAS), \
318 MAP_REGION_FLAT(BL_RO_DATA_BASE, \
319 BL_RO_DATA_END - BL_RO_DATA_BASE, \
320 MT_RO_DATA | EL3_PAS)
321 #else
322 #define ARM_MAP_BL_RO_NOT_USED MAP_REGION_FLAT( \
323 BL_CODE_BASE, BL_CODE_END - BL_CODE_BASE, \
324 MT_CODE | EL3_PAS)
325 #endif /* SEPARATE_CODE_AND_RODATA */
326
327 #if USE_COHERENT_MEM
328 #define ARM_MAP_BL_COHERENT_RAM MAP_REGION_FLAT( \
329 BL_COHERENT_RAM_BASE, \
330 BL_COHERENT_RAM_END - BL_COHERENT_RAM_BASE, \
331 MT_DEVICE | MT_RW | EL3_PAS)
332 #endif /* USE_COHERENT_MEM */
333
334 #if USE_ROMLIB
335 #define ARM_MAP_ROMLIB_CODE MAP_REGION_FLAT( \
336 ROMLIB_RO_BASE, \
337 ROMLIB_RO_LIMIT - ROMLIB_RO_BASE, \
338 MT_CODE | MT_SECURE)
339
340 #define ARM_MAP_ROMLIB_DATA MAP_REGION_FLAT( \
341 ROMLIB_RW_BASE, \
342 ROMLIB_RW_END - ROMLIB_RW_BASE, \
343 MT_MEMORY | MT_RW | MT_SECURE)
344 #endif /* USE_ROMLIB */
345
346 /*
347 * Map mem_protect flash region with read and write permissions
348 */
349 #define ARM_V2M_MAP_MEM_PROTECT MAP_REGION_FLAT( \
350 PLAT_ARM_MEM_PROT_ADDR, \
351 V2M_FLASH_BLOCK_SIZE, \
352 MT_DEVICE | MT_RW | MT_SECURE)
353 /*
354 * Map the region for device tree configuration with read and write permissions
355 */
356 #define ARM_MAP_BL_CONFIG_REGION MAP_REGION_FLAT( \
357 ARM_BL_RAM_BASE, \
358 (ARM_FW_CONFIGS_LIMIT - ARM_BL_RAM_BASE), \
359 MT_MEMORY | MT_RW | MT_SECURE)
360
361 /*
362 * The max number of regions like RO(code), coherent and data required by
363 * different BL stages which need to be mapped in the MMU.
364 */
365 #define ARM_BL_REGIONS 10
366
367 #define MAX_MMAP_REGIONS ( \
368 PLAT_ARM_MMAP_ENTRIES + ARM_BL_REGIONS)
369
370 /* Memory mapped Generic timer interfaces */
371 #define ARM_SYS_CNTCTL_BASE UL(0XF07FC000)
372
373 #define ARM_CONSOLE_BAUDRATE 115200
374
375 /*
376 * The TBBR document specifies a watchdog timeout of 256 seconds. SP805
377 * asserts reset after two consecutive countdowns (2 x 128 = 256 sec)
378 */
379 #define ARM_TWDG_TIMEOUT_SEC 128
380 #define ARM_TWDG_LOAD_VAL (ARM_SP805_TWDG_CLK_HZ * \
381 ARM_TWDG_TIMEOUT_SEC)
382
383 /******************************************************************************
384 * Required platform porting definitions common to all ARM standard platforms
385 *****************************************************************************/
386
387 /*
388 * Some data must be aligned on the biggest cache line size in the platform.
389 * This is known only to the platform as it might have a combination of
390 * integrated and external caches (64 on Arbel).
391 */
392 #define CACHE_WRITEBACK_GRANULE (U(1) << ARM_CACHE_WRITEBACK_SHIFT)
393
394 /*
395 * To enable FW_CONFIG to be loaded by BL1, define the corresponding base
396 * and limit. Leave enough space of BL2 meminfo.
397 */
398 #define ARM_FW_CONFIG_BASE (ARM_BL_RAM_BASE + sizeof(meminfo_t))
399 #define ARM_FW_CONFIG_LIMIT ( \
400 (ARM_BL_RAM_BASE + PAGE_SIZE) + (PAGE_SIZE / 2U))
401
402 /*
403 * Boot parameters passed from BL2 to BL31/BL32 are stored here
404 */
405 #define ARM_BL2_MEM_DESC_BASE (ARM_FW_CONFIG_LIMIT)
406 #define ARM_BL2_MEM_DESC_LIMIT ( \
407 ARM_BL2_MEM_DESC_BASE + (PAGE_SIZE / 2U))
408
409 /*
410 * Define limit of firmware configuration memory:
411 * ARM_FW_CONFIG + ARM_BL2_MEM_DESC memory
412 */
413 #define ARM_FW_CONFIGS_LIMIT (ARM_BL_RAM_BASE + (PAGE_SIZE * 2))
414
415 /*******************************************************************************
416 * BL1 specific defines.
417 * BL1 RW data is relocated from ROM to RAM at runtime so we need
418 * two sets of addresses.
419 ******************************************************************************/
420 #define BL1_RO_BASE PLAT_ARM_TRUSTED_ROM_BASE
421 #define BL1_RO_LIMIT (PLAT_ARM_TRUSTED_ROM_BASE + \
422 (PLAT_ARM_TRUSTED_ROM_SIZE - PLAT_ARM_MAX_ROMLIB_RO_SIZE))
423 /*
424 * Put BL1 RW at the top of the Trusted SRAM.
425 */
426 #define BL1_RW_BASE (ARM_BL_RAM_BASE + ARM_BL_RAM_SIZE - \
427 (PLAT_ARM_MAX_BL1_RW_SIZE + PLAT_ARM_MAX_ROMLIB_RW_SIZE))
428 #define BL1_RW_LIMIT (ARM_BL_RAM_BASE + \
429 (ARM_BL_RAM_SIZE - PLAT_ARM_MAX_ROMLIB_RW_SIZE))
430
431 #define ROMLIB_RO_BASE BL1_RO_LIMIT
432 #define ROMLIB_RO_LIMIT ( \
433 PLAT_ARM_TRUSTED_ROM_BASE + PLAT_ARM_TRUSTED_ROM_SIZE)
434
435 #define ROMLIB_RW_BASE (BL1_RW_BASE + PLAT_ARM_MAX_BL1_RW_SIZE)
436 #define ROMLIB_RW_END ( \
437 ROMLIB_RW_BASE + PLAT_ARM_MAX_ROMLIB_RW_SIZE)
438
439 /******************************************************************************
440 * BL2 specific defines.
441 *****************************************************************************/
442 #if BL2_AT_EL3
443 /* Put BL2 towards the middle of the Trusted SRAM */
444 #define BL2_BASE (ARM_TRUSTED_SRAM_BASE + \
445 PLAT_ARM_TRUSTED_SRAM_SIZE >> 1) + 0x2000)
446 #define BL2_LIMIT (ARM_BL_RAM_BASE + ARM_BL_RAM_SIZE)
447 #else
448 /*
449 * Put BL2 just below BL1.
450 */
451 #define BL2_BASE (BL1_RW_BASE - PLAT_ARM_MAX_BL2_SIZE)
452 #define BL2_LIMIT BL1_RW_BASE
453 #endif /* BL2_AT_EL3 */
454
455 /*******************************************************************************
456 * BL31 specific defines.
457 ******************************************************************************/
458 #if ARM_BL31_IN_DRAM || SEPARATE_NOBITS_REGION
459 /*
460 * Put BL31 at the bottom of TZC secured DRAM
461 */
462 #define BL31_BASE ARM_AP_TZC_DRAM1_BASE
463 #define BL31_LIMIT ( \
464 ARM_AP_TZC_DRAM1_BASE + PLAT_ARM_MAX_BL31_SIZE)
465
466 /*
467 * For SEPARATE_NOBITS_REGION, BL31 PROGBITS are loaded in TZC secured DRAM.
468 * And BL31 NOBITS are loaded in Trusted SRAM such that BL2 is overwritten.
469 */
470 #if SEPARATE_NOBITS_REGION
471 #define BL31_NOBITS_BASE BL2_BASE
472 #define BL31_NOBITS_LIMIT BL2_LIMIT
473 #endif /* SEPARATE_NOBITS_REGION */
474 #elif (RESET_TO_BL31)
475 /* Ensure Position Independent support (PIE) is enabled for this config.*/
476 #if !ENABLE_PIE
477 #error "BL31 must be a PIE if RESET_TO_BL31=1."
478 #endif /* !ENABLE_PIE */
479 /*
480 * Since this is PIE, we can define BL31_BASE to 0x0 since this macro is solely
481 * used for building BL31 and not used for loading BL31.
482 */
483 #define NEW_SRAM_ALLOCATION
484
485 #ifdef NEW_SRAM_ALLOCATION
486 #define BL31_BASE 0x02000000
487 #else
488 #define BL31_BASE 0x02001000
489 #endif /* NEW_SRAM_ALLOCATION */
490
491 #define BL31_LIMIT BL2_BASE /* PLAT_ARM_MAX_BL31_SIZE */
492 #else
493 /* Put BL31 below BL2 in the Trusted SRAM.*/
494 #define BL31_BASE ((ARM_BL_RAM_BASE + ARM_BL_RAM_SIZE) - \
495 PLAT_ARM_MAX_BL31_SIZE)
496 #define BL31_PROGBITS_LIMIT BL2_BASE
497
498 /*
499 * For BL2_AT_EL3 make sure the BL31 can grow up until BL2_BASE.
500 * This is because in the BL2_AT_EL3 configuration, BL2 is always resident.
501 */
502 #if BL2_AT_EL3
503 #define BL31_LIMIT BL2_BASE
504 #else
505 #define BL31_LIMIT (ARM_BL_RAM_BASE + ARM_BL_RAM_SIZE)
506 #endif /* BL2_AT_EL3 */
507 #endif /* ARM_BL31_IN_DRAM || SEPARATE_NOBITS_REGION */
508
509 /*
510 * BL32 is mandatory in AArch32. In AArch64, undefine BL32_BASE if there is
511 * no SPD and no SPM-MM, as they are the only ones that can be used as BL32.
512 */
513 #if defined(SPD_none) && !SPM_MM
514 #error BL32_BASE is not defined
515 #undef BL32_BASE
516 #endif /* SPD_none && !SPM_MM */
517
518 /******************************************************************************
519 * FWU Images: NS_BL1U, BL2U & NS_BL2U defines.
520 *****************************************************************************/
521 #define BL2U_BASE BL2_BASE
522 #define BL2U_LIMIT BL2_LIMIT
523
524 #define NS_BL2U_BASE ARM_NS_DRAM1_BASE
525 #define NS_BL1U_BASE (PLAT_ARM_NVM_BASE + UL(0x03EB8000))
526
527 /*
528 * ID of the secure physical generic timer interrupt used by the TSP.
529 */
530 #define TSP_IRQ_SEC_PHY_TIMER ARM_IRQ_SEC_PHY_TIMER
531
532 /*
533 * One cache line needed for bakery locks on ARM platforms
534 */
535 #define PLAT_PERCPU_BAKERY_LOCK_SIZE (1 * CACHE_WRITEBACK_GRANULE)
536
537 /* Priority levels for ARM platforms */
538 #define PLAT_RAS_PRI 0x10
539 #define PLAT_SDEI_CRITICAL_PRI 0x60
540 #define PLAT_SDEI_NORMAL_PRI 0x70
541
542 /* ARM platforms use 3 upper bits of secure interrupt priority */
543 #define ARM_PRI_BITS 3
544
545 /* SGI used for SDEI signalling */
546 #define ARM_SDEI_SGI ARM_IRQ_SEC_SGI_0
547
548 #if SDEI_IN_FCONF
549 /* ARM SDEI dynamic private event max count */
550 #define ARM_SDEI_DP_EVENT_MAX_CNT 3
551
552 /* ARM SDEI dynamic shared event max count */
553 #define ARM_SDEI_DS_EVENT_MAX_CNT 3
554 #else
555 /* ARM SDEI dynamic private event numbers */
556 #define ARM_SDEI_DP_EVENT_0 1000
557 #define ARM_SDEI_DP_EVENT_1 1001
558 #define ARM_SDEI_DP_EVENT_2 1002
559
560 /* ARM SDEI dynamic shared event numbers */
561 #define ARM_SDEI_DS_EVENT_0 2000
562 #define ARM_SDEI_DS_EVENT_1 2001
563 #define ARM_SDEI_DS_EVENT_2 2002
564
565 #define ARM_SDEI_PRIVATE_EVENTS \
566 SDEI_DEFINE_EVENT_0(ARM_SDEI_SGI), \
567 SDEI_PRIVATE_EVENT(ARM_SDEI_DP_EVENT_0, SDEI_DYN_IRQ, SDEI_MAPF_DYNAMIC), \
568 SDEI_PRIVATE_EVENT(ARM_SDEI_DP_EVENT_1, SDEI_DYN_IRQ, SDEI_MAPF_DYNAMIC), \
569 SDEI_PRIVATE_EVENT(ARM_SDEI_DP_EVENT_2, SDEI_DYN_IRQ, SDEI_MAPF_DYNAMIC)
570
571 #define ARM_SDEI_SHARED_EVENTS \
572 SDEI_SHARED_EVENT(ARM_SDEI_DS_EVENT_0, SDEI_DYN_IRQ, SDEI_MAPF_DYNAMIC), \
573 SDEI_SHARED_EVENT(ARM_SDEI_DS_EVENT_1, SDEI_DYN_IRQ, SDEI_MAPF_DYNAMIC), \
574 SDEI_SHARED_EVENT(ARM_SDEI_DS_EVENT_2, SDEI_DYN_IRQ, SDEI_MAPF_DYNAMIC)
575 #endif /* SDEI_IN_FCONF */
576
577 #endif /* ARM_DEF_H */