| 1 |
/* |
| 2 |
* Copyright (c) 2015-2021, Renesas Electronics Corporation. All rights reserved. |
| 3 |
* |
| 4 |
* SPDX-License-Identifier: BSD-3-Clause |
| 5 |
*/ |
| 6 |
|
| 7 |
#ifndef EMMC_REGISTERS_H |
| 8 |
#define EMMC_REGISTERS_H |
| 9 |
|
| 10 |
/* MMC channel select */ |
| 11 |
#define MMC_CH0 (0U) /* SDHI2/MMC0 */ |
| 12 |
#define MMC_CH1 (1U) /* SDHI3/MMC1 */ |
| 13 |
|
| 14 |
#if (RCAR_LSI == RCAR_E3) || (RCAR_LSI == RZ_G2M) || (RCAR_LSI == RZ_G2H) || (RCAR_LSI == RZ_G2N) |
| 15 |
#define USE_MMC_CH (MMC_CH1) /* R-Car E3 or RZ/G2{H,M,N} */ |
| 16 |
#else /* RCAR_LSI == RCAR_E3 || RCAR_LSI == RZ_G2{H,M,N} */ |
| 17 |
#define USE_MMC_CH (MMC_CH0) /* R-Car H3/M3/M3N */ |
| 18 |
#endif /* RCAR_LSI == RCAR_E3 || RCAR_LSI == RZ_G2{H,M,N} */ |
| 19 |
|
| 20 |
#define BIT0 (0x00000001U) |
| 21 |
#define BIT1 (0x00000002U) |
| 22 |
#define BIT2 (0x00000004U) |
| 23 |
#define BIT3 (0x00000008U) |
| 24 |
#define BIT4 (0x00000010U) |
| 25 |
#define BIT5 (0x00000020U) |
| 26 |
#define BIT6 (0x00000040U) |
| 27 |
#define BIT7 (0x00000080U) |
| 28 |
#define BIT8 (0x00000100U) |
| 29 |
#define BIT9 (0x00000200U) |
| 30 |
#define BIT10 (0x00000400U) |
| 31 |
#define BIT11 (0x00000800U) |
| 32 |
#define BIT12 (0x00001000U) |
| 33 |
#define BIT13 (0x00002000U) |
| 34 |
#define BIT14 (0x00004000U) |
| 35 |
#define BIT15 (0x00008000U) |
| 36 |
#define BIT16 (0x00010000U) |
| 37 |
#define BIT17 (0x00020000U) |
| 38 |
#define BIT18 (0x00040000U) |
| 39 |
#define BIT19 (0x00080000U) |
| 40 |
#define BIT20 (0x00100000U) |
| 41 |
#define BIT21 (0x00200000U) |
| 42 |
#define BIT22 (0x00400000U) |
| 43 |
#define BIT23 (0x00800000U) |
| 44 |
#define BIT24 (0x01000000U) |
| 45 |
#define BIT25 (0x02000000U) |
| 46 |
#define BIT26 (0x04000000U) |
| 47 |
#define BIT27 (0x08000000U) |
| 48 |
#define BIT28 (0x10000000U) |
| 49 |
#define BIT29 (0x20000000U) |
| 50 |
#define BIT30 (0x40000000U) |
| 51 |
#define BIT31 (0x80000000U) |
| 52 |
|
| 53 |
#if USE_MMC_CH == MMC_CH0 |
| 54 |
#define CPG_SDxCKCR (CPG_SD2CKCR) /* SDHI2/MMC0 */ |
| 55 |
#else /* USE_MMC_CH == MMC_CH0 */ |
| 56 |
#define CPG_SDxCKCR (CPG_SD3CKCR) /* SDHI3/MMC1 */ |
| 57 |
#endif /* USE_MMC_CH == MMC_CH0 */ |
| 58 |
|
| 59 |
/* Boot Status register */ |
| 60 |
#define MFISBTSTSR (0xE6260604U) |
| 61 |
|
| 62 |
#define MFISBTSTSR_BOOT_PARTITION (0x00000010U) |
| 63 |
|
| 64 |
/* eMMC registers */ |
| 65 |
#define MMC0_SD_BASE (0xEE140000U) |
| 66 |
#define MMC1_SD_BASE (0xEE160000U) |
| 67 |
|
| 68 |
#if USE_MMC_CH == MMC_CH0 |
| 69 |
#define MMC_SD_BASE (MMC0_SD_BASE) |
| 70 |
#else /* USE_MMC_CH == MMC_CH0 */ |
| 71 |
#define MMC_SD_BASE (MMC1_SD_BASE) |
| 72 |
#endif /* USE_MMC_CH == MMC_CH0 */ |
| 73 |
|
| 74 |
#define SD_CMD (MMC_SD_BASE + 0x0000U) |
| 75 |
#define SD_PORTSEL (MMC_SD_BASE + 0x0008U) |
| 76 |
#define SD_ARG (MMC_SD_BASE + 0x0010U) |
| 77 |
#define SD_ARG1 (MMC_SD_BASE + 0x0018U) |
| 78 |
#define SD_STOP (MMC_SD_BASE + 0x0020U) |
| 79 |
#define SD_SECCNT (MMC_SD_BASE + 0x0028U) |
| 80 |
#define SD_RSP10 (MMC_SD_BASE + 0x0030U) |
| 81 |
#define SD_RSP1 (MMC_SD_BASE + 0x0038U) |
| 82 |
#define SD_RSP32 (MMC_SD_BASE + 0x0040U) |
| 83 |
#define SD_RSP3 (MMC_SD_BASE + 0x0048U) |
| 84 |
#define SD_RSP54 (MMC_SD_BASE + 0x0050U) |
| 85 |
#define SD_RSP5 (MMC_SD_BASE + 0x0058U) |
| 86 |
#define SD_RSP76 (MMC_SD_BASE + 0x0060U) |
| 87 |
#define SD_RSP7 (MMC_SD_BASE + 0x0068U) |
| 88 |
#define SD_INFO1 (MMC_SD_BASE + 0x0070U) |
| 89 |
#define SD_INFO2 (MMC_SD_BASE + 0x0078U) |
| 90 |
#define SD_INFO1_MASK (MMC_SD_BASE + 0x0080U) |
| 91 |
#define SD_INFO2_MASK (MMC_SD_BASE + 0x0088U) |
| 92 |
#define SD_CLK_CTRL (MMC_SD_BASE + 0x0090U) |
| 93 |
#define SD_SIZE (MMC_SD_BASE + 0x0098U) |
| 94 |
#define SD_OPTION (MMC_SD_BASE + 0x00A0U) |
| 95 |
#define SD_ERR_STS1 (MMC_SD_BASE + 0x00B0U) |
| 96 |
#define SD_ERR_STS2 (MMC_SD_BASE + 0x00B8U) |
| 97 |
#define SD_BUF0 (MMC_SD_BASE + 0x00C0U) |
| 98 |
#define SDIO_MODE (MMC_SD_BASE + 0x00D0U) |
| 99 |
#define SDIO_INFO1 (MMC_SD_BASE + 0x00D8U) |
| 100 |
#define SDIO_INFO1_MASK (MMC_SD_BASE + 0x00E0U) |
| 101 |
#define CC_EXT_MODE (MMC_SD_BASE + 0x0360U) |
| 102 |
#define SOFT_RST (MMC_SD_BASE + 0x0380U) |
| 103 |
#define VERSION (MMC_SD_BASE + 0x0388U) |
| 104 |
#define HOST_MODE (MMC_SD_BASE + 0x0390U) |
| 105 |
#define DM_CM_DTRAN_MODE (MMC_SD_BASE + 0x0820U) |
| 106 |
#define DM_CM_DTRAN_CTRL (MMC_SD_BASE + 0x0828U) |
| 107 |
#define DM_CM_RST (MMC_SD_BASE + 0x0830U) |
| 108 |
#define DM_CM_INFO1 (MMC_SD_BASE + 0x0840U) |
| 109 |
#define DM_CM_INFO1_MASK (MMC_SD_BASE + 0x0848U) |
| 110 |
#define DM_CM_INFO2 (MMC_SD_BASE + 0x0850U) |
| 111 |
#define DM_CM_INFO2_MASK (MMC_SD_BASE + 0x0858U) |
| 112 |
#define DM_DTRAN_ADDR (MMC_SD_BASE + 0x0880U) |
| 113 |
|
| 114 |
/* SD_INFO1 Registers */ |
| 115 |
#define SD_INFO1_HPIRES 0x00010000UL /* Response Reception Completion */ |
| 116 |
#define SD_INFO1_INFO10 0x00000400UL /* Indicates the SDDAT3 state */ |
| 117 |
#define SD_INFO1_INFO9 0x00000200UL /* SDDAT3 Card Insertion */ |
| 118 |
#define SD_INFO1_INFO8 0x00000100UL /* SDDAT3 Card Removal */ |
| 119 |
#define SD_INFO1_INFO7 0x00000080UL /* Write Protect */ |
| 120 |
#define SD_INFO1_INFO5 0x00000020UL /* Indicates the ISDCD state */ |
| 121 |
#define SD_INFO1_INFO4 0x00000010UL /* ISDCD Card Insertion */ |
| 122 |
#define SD_INFO1_INFO3 0x00000008UL /* ISDCD Card Removal */ |
| 123 |
#define SD_INFO1_INFO2 0x00000004UL /* Access end */ |
| 124 |
#define SD_INFO1_INFO0 0x00000001UL /* Response end */ |
| 125 |
|
| 126 |
/* SD_INFO2 Registers */ |
| 127 |
#define SD_INFO2_ILA 0x00008000UL /* Illegal Access Error */ |
| 128 |
#define SD_INFO2_CBSY 0x00004000UL /* Command Type Register Busy */ |
| 129 |
#define SD_INFO2_SCLKDIVEN 0x00002000UL |
| 130 |
#define SD_INFO2_BWE 0x00000200UL /* SD_BUF Write Enable */ |
| 131 |
#define SD_INFO2_BRE 0x00000100UL /* SD_BUF Read Enable */ |
| 132 |
#define SD_INFO2_DAT0 0x00000080UL /* SDDAT0 */ |
| 133 |
#define SD_INFO2_ERR6 0x00000040UL /* Response Timeout */ |
| 134 |
#define SD_INFO2_ERR5 0x00000020UL /* SD_BUF Illegal Read Access */ |
| 135 |
#define SD_INFO2_ERR4 0x00000010UL /* SD_BUF Illegal Write Access */ |
| 136 |
#define SD_INFO2_ERR3 0x00000008UL /* Data Timeout */ |
| 137 |
#define SD_INFO2_ERR2 0x00000004UL /* END Error */ |
| 138 |
#define SD_INFO2_ERR1 0x00000002UL /* CRC Error */ |
| 139 |
#define SD_INFO2_ERR0 0x00000001UL /* CMD Error */ |
| 140 |
#define SD_INFO2_ALL_ERR 0x0000807FUL |
| 141 |
#define SD_INFO2_CLEAR 0x00000800UL /* BIT11 write value should always be 1. HWM_0003 */ |
| 142 |
|
| 143 |
/* SOFT_RST */ |
| 144 |
#define SOFT_RST_SDRST 0x00000001UL |
| 145 |
|
| 146 |
/* SD_CLK_CTRL */ |
| 147 |
#define SD_CLK_CTRL_SDCLKOFFEN 0x00000200UL |
| 148 |
#define SD_CLK_CTRL_SCLKEN 0x00000100UL |
| 149 |
#define SD_CLK_CTRL_CLKDIV_MASK 0x000000FFUL |
| 150 |
#define SD_CLOCK_ENABLE 0x00000100UL |
| 151 |
#define SD_CLOCK_DISABLE 0x00000000UL |
| 152 |
#define SD_CLK_WRITE_MASK 0x000003FFUL |
| 153 |
#define SD_CLK_CLKDIV_CLEAR_MASK 0xFFFFFF0FUL |
| 154 |
|
| 155 |
/* SD_OPTION */ |
| 156 |
#define SD_OPTION_TIMEOUT_CNT_MASK 0x000000F0UL |
| 157 |
|
| 158 |
/* |
| 159 |
* MMC Clock Frequency |
| 160 |
* 200MHz * 1/x = output clock |
| 161 |
*/ |
| 162 |
#define MMC_CLK_OFF 0UL /* Clock output is disabled */ |
| 163 |
#define MMC_400KHZ 512UL /* 200MHz * 1/512 = 390 KHz */ |
| 164 |
#define MMC_20MHZ 16UL /* 200MHz * 1/16 = 12.5 MHz Normal speed mode */ |
| 165 |
#define MMC_26MHZ 8UL /* 200MHz * 1/8 = 25 MHz HS mode 26Mhz */ |
| 166 |
#define MMC_52MHZ 4UL /* 200MHz * 1/4 = 50 MHz HS mode 52Mhz */ |
| 167 |
#define MMC_100MHZ 2UL /* 200MHz * 1/2 = 100 MHz */ |
| 168 |
#define MMC_200MHZ 1UL /* 200MHz * 1/1 = 200 MHz */ |
| 169 |
|
| 170 |
#define MMC_FREQ_52MHZ 52000000UL |
| 171 |
#define MMC_FREQ_26MHZ 26000000UL |
| 172 |
#define MMC_FREQ_20MHZ 20000000UL |
| 173 |
|
| 174 |
/* MMC Clock DIV */ |
| 175 |
#define MMC_SD_CLK_START 0x00000100UL /* CLOCK On */ |
| 176 |
#define MMC_SD_CLK_STOP (~0x00000100UL) /* CLOCK stop */ |
| 177 |
#define MMC_SD_CLK_DIV1 0x000000FFUL /* 1/1 */ |
| 178 |
#define MMC_SD_CLK_DIV2 0x00000000UL /* 1/2 */ |
| 179 |
#define MMC_SD_CLK_DIV4 0x00000001UL /* 1/4 */ |
| 180 |
#define MMC_SD_CLK_DIV8 0x00000002UL /* 1/8 */ |
| 181 |
#define MMC_SD_CLK_DIV16 0x00000004UL /* 1/16 */ |
| 182 |
#define MMC_SD_CLK_DIV32 0x00000008UL /* 1/32 */ |
| 183 |
#define MMC_SD_CLK_DIV64 0x00000010UL /* 1/64 */ |
| 184 |
#define MMC_SD_CLK_DIV128 0x00000020UL /* 1/128 */ |
| 185 |
#define MMC_SD_CLK_DIV256 0x00000040UL /* 1/256 */ |
| 186 |
#define MMC_SD_CLK_DIV512 0x00000080UL /* 1/512 */ |
| 187 |
|
| 188 |
/* DM_CM_DTRAN_MODE */ |
| 189 |
#define DM_CM_DTRAN_MODE_CH0 0x00000000UL /* CH0(downstream) */ |
| 190 |
#define DM_CM_DTRAN_MODE_CH1 0x00010000UL /* CH1(upstream) */ |
| 191 |
#define DM_CM_DTRAN_MODE_BIT_WIDTH 0x00000030UL |
| 192 |
|
| 193 |
/* CC_EXT_MODE */ |
| 194 |
#define CC_EXT_MODE_DMASDRW_ENABLE 0x00000002UL /* SD_BUF Read/Write DMA Transfer */ |
| 195 |
#define CC_EXT_MODE_CLEAR 0x00001010UL /* BIT 12 & 4 always 1. */ |
| 196 |
|
| 197 |
/* DM_CM_INFO_MASK */ |
| 198 |
#define DM_CM_INFO_MASK_CLEAR 0xFFFCFFFEUL |
| 199 |
#define DM_CM_INFO_CH0_ENABLE 0x00010001UL |
| 200 |
#define DM_CM_INFO_CH1_ENABLE 0x00020001UL |
| 201 |
|
| 202 |
/* DM_DTRAN_ADDR */ |
| 203 |
#define DM_DTRAN_ADDR_WRITE_MASK 0xFFFFFFF8UL |
| 204 |
|
| 205 |
/* DM_CM_DTRAN_CTRL */ |
| 206 |
#define DM_CM_DTRAN_CTRL_START 0x00000001UL |
| 207 |
|
| 208 |
/* SYSC Registers */ |
| 209 |
#if USE_MMC_CH == MMC_CH0 |
| 210 |
#define CPG_MSTP_MMC (BIT12) /* SDHI2/MMC0 */ |
| 211 |
#else /* USE_MMC_CH == MMC_CH0 */ |
| 212 |
#define CPG_MSTP_MMC (BIT11) /* SDHI3/MMC1 */ |
| 213 |
#endif /* USE_MMC_CH == MMC_CH0 */ |
| 214 |
|
| 215 |
#endif /* EMMC_REGISTERS_H */ |