Debian Codegraph @

support/Config/rapolicy.conf

raw
1 #
2 # Argus Software
3 # Copyright (c) 2000-2024 QoSient, LLC
4 # All rights reserved.
5 #
6 # This program is free software; you can redistribute it and/or modify
7 # it under the terms of the GNU General Public License as published by
8 # the Free Software Foundation; either version 2, or (at your option)
9 # any later version.
10 #
11 # This program is distributed in the hope that it will be useful,
12 # but WITHOUT ANY WARRANTY; without even the implied warranty of
13 # MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
14 # GNU General Public License for more details.
15 #
16 # You should have received a copy of the GNU General Public License
17 # along with this program; if not, write to the Free Software
18 # Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
19 #
20 #
21 # Example rapolicy.conf
22 #
23 # Rapolicy, like most ra* programs, can read a program specific
24 # configuration file. This is an example configuration for rapolicy()
25 # that provides the opportunity to modify the default behavior of
26 # parsing a Cisco ACL definition, and reporting on flows that match
27 # aspects of the policy defined by the ACL.
28 #
29 # This file is read by rapolicy() from the command line using the
30 # " -f rapolicy.conf " option.
31 #
32 # RA_POLICY_DUMP_POLICY is a debugging aid. If it is set to yes, then rapolicy() will read
33 # and parse the ACL file and output an English language description of the actions associated
34 # with each ACL entry. After outputting the explaination, rapolicy will exit.
35
36 #RA_POLICY_DUMP_POLICY="yes"
37
38 # The rapolicy client parses a Cisco IOS ACL and constructs a filter which is used
39 # to permit or deny flows. Under normal circumstances the packets meeting the
40 # criteria for a permit rule are output by the client. There are circumstances where
41 # it is useful to see the flows that are dropped. RA_POLICY_SHOW_WHICH can be set
42 # to a value of "deny" in these cases.
43
44 #RA_POLICY_SHOW_WHICH="permit"
45
46 # Under normal operating conditions, only the flow records that match a permit
47 # or a deny rule (depending on the value of RA_POLICY_SHOW_WHICH) are output. In
48 # some instance like baselining the actions of an ACL, the goal is to have a fully
49 # labeled set of flows regardless of the ACL's permit or deny determination. In these
50 # instances, a value of yes for RA_POLICY_JUST_LABEL will allow the full processing of
51 # the flows and will label them according to the settings of the label flags but all of
52 # the flows handled by the ACL will be output
53
54 RA_POLICY_JUST_LABEL="no"
55
56
57 # A Cisco IP ACL normally has no impact on non-IP traffic eg: ARP, DDCMP, Slotted-Aloha
58 # RA_POLICY_PERMIT_OTHERS can be set to "yes" for the normal behavior or "no" to block
59 # non-IP traffic
60
61 #RA_POLICY_PERMIT_OTHERS="yes"
62
63
64 # The rapolicy client can add a label to a flow indicating the action (permit, deny,
65 # or implictDeny), the ACL name or number) and the line within the ACL that caused the
66 # action.
67 #
68 # if RA_POLICY_LABEL_LOG is set to "yes" labels will be added to flows matching ACL
69 # entries that have a log qualifier.
70
71 RA_POLICY_LABEL_LOG="no"
72
73
74 # If RA_POLICY_LABEL_ALL is set to "yes" regardless of the value of RA_POLICY_LABEL_LOG,
75 # any flow that matches an ACL entry will be labeled
76
77 RA_POLICY_LABEL_ALL="no"
78
79
80 # Every Cisos IOS ACL has an implicit deny as its last entry. Flows that do not match any
81 # ACL entry are usually dropped silently. RA_POLICY_LABEL_IMPLICIT will label flows that
82 # are dropped by the implicit deny rule. Under normal circumstances, these flows are not
83 # labeled. The values of RA_POLICY_LABEL_ALL and RA_POLICY_LABEL_LOG do not govern the
84 # labeling of these flows.
85
86 RA_POLICY_LABEL_IMPLICIT="no"
87
88
89 # The ACL is contained in a standard ASCII text file which is identified by the value of
90 # RA_POLICY_ACL_FILE Since rapolicy is not designed to be a syntax checker, it is a
91 # good idea to create the ACL on a Cisco device and take the output of show running
92 # (or the appropriate equivalent command) as the input ACL for rapolicy()
93 # The policy file should be defined as the last item in the rapolicy.conf file
94 # or there may be unexpected side effects
95
96 #RA_POLICY_ACL_FILE="/tmp/ACL03.txt"
97