| 1 |
/* |
| 2 |
pins_arduino.h - Pin definition functions for Arduino Robot Control Board |
| 3 |
Part of Arduino - http://www.arduino.cc/ |
| 4 |
|
| 5 |
Copyright (c) 2913 D. Cuartielles, X. Yang (Arduino Verkstad) |
| 6 |
Copyright (c) 2012 D. Cuartielles, N. de la Riva, I. Gallego, E. Gallego |
| 7 |
|
| 8 |
This library is free software; you can redistribute it and/or |
| 9 |
modify it under the terms of the GNU Lesser General Public |
| 10 |
License as published by the Free Software Foundation; either |
| 11 |
version 2.1 of the License, or (at your option) any later version. |
| 12 |
|
| 13 |
This library is distributed in the hope that it will be useful, |
| 14 |
but WITHOUT ANY WARRANTY; without even the implied warranty of |
| 15 |
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU |
| 16 |
Lesser General Public License for more details. |
| 17 |
|
| 18 |
You should have received a copy of the GNU Lesser General |
| 19 |
Public License along with this library; if not, write to the |
| 20 |
Free Software Foundation, Inc., 59 Temple Place, Suite 330, |
| 21 |
Boston, MA 02111-1307 USA |
| 22 |
*/ |
| 23 |
|
| 24 |
#ifndef Pins_Arduino_h |
| 25 |
#define Pins_Arduino_h |
| 26 |
|
| 27 |
#include <avr/pgmspace.h> |
| 28 |
|
| 29 |
#define ARDUINO_MODEL_USB_PID 0x0039 |
| 30 |
|
| 31 |
#define TX_RX_LED_INIT DDRD |= (1<<5), DDRB |= (1<<0) |
| 32 |
#define TXLED0 PORTD |= (1<<5) |
| 33 |
#define TXLED1 PORTD &= ~(1<<5) |
| 34 |
#define RXLED0 PORTB |= (1<<0) |
| 35 |
#define RXLED1 PORTB &= ~(1<<0) |
| 36 |
|
| 37 |
#define D10 TK1 |
| 38 |
#define D9 TK2 |
| 39 |
#define D8 TK4 |
| 40 |
#define D7 TK3 |
| 41 |
|
| 42 |
#define PIN_SERIAL_RX (0) |
| 43 |
#define PIN_SERIAL_TX (1) |
| 44 |
|
| 45 |
static const uint8_t RX = PIN_SERIAL_RX; |
| 46 |
static const uint8_t TX = PIN_SERIAL_TX; |
| 47 |
|
| 48 |
#define PIN_WIRE_SDA (2) |
| 49 |
#define PIN_WIRE_SCL (3) |
| 50 |
|
| 51 |
static const uint8_t SDA = PIN_WIRE_SDA; |
| 52 |
static const uint8_t SCL = PIN_WIRE_SCL; |
| 53 |
|
| 54 |
// Map SPI port to 'new' pins D14..D17 |
| 55 |
#define PIN_SPI_SS (17) |
| 56 |
#define PIN_SPI_MOSI (16) |
| 57 |
#define PIN_SPI_MISO (14) |
| 58 |
#define PIN_SPI_SCK (15) |
| 59 |
|
| 60 |
static const uint8_t SS = PIN_SPI_SS; |
| 61 |
static const uint8_t MOSI = PIN_SPI_MOSI; |
| 62 |
static const uint8_t MISO = PIN_SPI_MISO; |
| 63 |
static const uint8_t SCK = PIN_SPI_SCK; |
| 64 |
|
| 65 |
// Mapping of analog pins as digital I/O |
| 66 |
// A6-A11 share with digital pins |
| 67 |
#define PIN_A0 (18) |
| 68 |
#define PIN_A1 (19) |
| 69 |
#define PIN_A2 (20) |
| 70 |
#define PIN_A3 (21) |
| 71 |
#define PIN_A4 (22) |
| 72 |
#define PIN_A5 (23) |
| 73 |
#define PIN_A6 (24) |
| 74 |
#define PIN_A7 (25) |
| 75 |
#define PIN_A8 (26) |
| 76 |
#define PIN_A9 (27) |
| 77 |
#define PIN_A10 (28) |
| 78 |
#define PIN_A11 (29) |
| 79 |
|
| 80 |
static const uint8_t A0 = PIN_A0; |
| 81 |
static const uint8_t A1 = PIN_A1; |
| 82 |
static const uint8_t A2 = PIN_A2; |
| 83 |
static const uint8_t A3 = PIN_A3; |
| 84 |
static const uint8_t A4 = PIN_A4; |
| 85 |
static const uint8_t A5 = PIN_A5; |
| 86 |
static const uint8_t A6 = PIN_A6; // D4 |
| 87 |
static const uint8_t A7 = PIN_A7; // D6 |
| 88 |
static const uint8_t A8 = PIN_A8; // D8 |
| 89 |
static const uint8_t A9 = PIN_A9; // D9 |
| 90 |
static const uint8_t A10 = PIN_A10; // D10 |
| 91 |
static const uint8_t A11 = PIN_A11; // D12 |
| 92 |
|
| 93 |
// Specific Mapping for the Motor Board |
| 94 |
static const uint8_t MUX_IN = 20; // A2 |
| 95 |
static const uint8_t MUXA = 7; // D7 |
| 96 |
static const uint8_t MUXB = 8; // D8 |
| 97 |
static const uint8_t MUXC = 11; // D11 |
| 98 |
static const uint8_t MUXI = 13; // D13 |
| 99 |
static const uint8_t TRIM = 21; // A3 |
| 100 |
static const uint8_t SENSE_A = 22; // A4 |
| 101 |
static const uint8_t SENSE_B = 23; // A5 |
| 102 |
static const uint8_t IN_A1 = 6; // D6 - A7 |
| 103 |
static const uint8_t IN_A2 = 5; // D5 |
| 104 |
static const uint8_t IN_B1 = 10; // D10 |
| 105 |
static const uint8_t IN_B2 = 9; // D9 |
| 106 |
static const uint8_t TK1 = 18; // A0 |
| 107 |
static const uint8_t TK2 = 19; // A1 |
| 108 |
static const uint8_t TK3 = 4; // A6 |
| 109 |
static const uint8_t TK4 = 12; // A11 |
| 110 |
|
| 111 |
// __AVR_ATmega32U4__ has an unusual mapping of pins to channels |
| 112 |
extern const uint8_t PROGMEM analog_pin_to_channel_PGM[]; |
| 113 |
#define analogPinToChannel(P) ( pgm_read_byte( analog_pin_to_channel_PGM + (P) ) ) |
| 114 |
|
| 115 |
#define digitalPinToInterrupt(p) ((p) == 0 ? 2 : ((p) == 1 ? 3 : ((p) == 2 ? 1 : ((p) == 3 ? 0 : ((p) == 7 ? 4 : NOT_AN_INTERRUPT))))) |
| 116 |
|
| 117 |
#ifdef ARDUINO_MAIN |
| 118 |
|
| 119 |
// On the Arduino board, digital pins are also used |
| 120 |
// for the analog output (software PWM). Analog input |
| 121 |
// pins are a separate set. |
| 122 |
|
| 123 |
// ARDUINO LEONARDO / ARDUINO ROBOT CONTROL / ATMEGA 32U4 / FUNCTION / REGISTER |
| 124 |
// |
| 125 |
// D0 RX PD2 RX RXD1/INT2 |
| 126 |
// D1 TX PD3 TX TXD1/INT3 |
| 127 |
// D2 SDA PD1 SDA SDA/INT1 |
| 128 |
// D3# SCL PD0 PWM8/SCL OC0B/SCL/INT0 |
| 129 |
// D4 TK3 A6 PD4 ADC8 |
| 130 |
// D5# INA2 PC6 ??? OC3A/#OC4A |
| 131 |
// D6# INA1 A7 PD7 FastPWM #OC4D/ADC10 |
| 132 |
// D7 MUXA PE6 INT6/AIN0 |
| 133 |
// |
| 134 |
// D8 MUXB A8 PB4 ADC11/PCINT4 |
| 135 |
// D9# INB2 A9 PB5 PWM16 OC1A/#OC4B/ADC12/PCINT5 |
| 136 |
// D10# INB1 A10 PB6 PWM16 OC1B/0c4B/ADC13/PCINT6 |
| 137 |
// D11# MUXC PB7 PWM8/16 0C0A/OC1C/#RTS/PCINT7 |
| 138 |
// D12 TK4 A11 PD6 T1/#OC4D/ADC9 |
| 139 |
// D13# MUXI PC7 PWM10 CLK0/OC4A |
| 140 |
// |
| 141 |
// A0 TK1 D18 PF7 ADC7 |
| 142 |
// A1 TK2 D19 PF6 ADC6 |
| 143 |
// A2 MUX_IN D20 PF5 ADC5 |
| 144 |
// A3 TRIM D21 PF4 ADC4 |
| 145 |
// A4 SENSE_A D22 PF1 ADC1 |
| 146 |
// A5 SENSE_B D23 PF0 ADC0 |
| 147 |
// |
| 148 |
// MISO MISO D14 PB3 MISO,PCINT3 |
| 149 |
// SCK SCK D15 PB1 SCK,PCINT1 |
| 150 |
// MOSI MOSI D16 PB2 MOSI,PCINT2 |
| 151 |
// SS RX_LED D17 PB0 RXLED,SS/PCINT0 |
| 152 |
// |
| 153 |
// TXLED TX_LED PD5 |
| 154 |
// HWB PE2 HWB |
| 155 |
|
| 156 |
// these arrays map port names (e.g. port B) to the |
| 157 |
// appropriate addresses for various functions (e.g. reading |
| 158 |
// and writing) |
| 159 |
const uint16_t PROGMEM port_to_mode_PGM[] = { |
| 160 |
NOT_A_PORT, |
| 161 |
NOT_A_PORT, |
| 162 |
(uint16_t) &DDRB, |
| 163 |
(uint16_t) &DDRC, |
| 164 |
(uint16_t) &DDRD, |
| 165 |
(uint16_t) &DDRE, |
| 166 |
(uint16_t) &DDRF, |
| 167 |
}; |
| 168 |
|
| 169 |
const uint16_t PROGMEM port_to_output_PGM[] = { |
| 170 |
NOT_A_PORT, |
| 171 |
NOT_A_PORT, |
| 172 |
(uint16_t) &PORTB, |
| 173 |
(uint16_t) &PORTC, |
| 174 |
(uint16_t) &PORTD, |
| 175 |
(uint16_t) &PORTE, |
| 176 |
(uint16_t) &PORTF, |
| 177 |
}; |
| 178 |
|
| 179 |
const uint16_t PROGMEM port_to_input_PGM[] = { |
| 180 |
NOT_A_PORT, |
| 181 |
NOT_A_PORT, |
| 182 |
(uint16_t) &PINB, |
| 183 |
(uint16_t) &PINC, |
| 184 |
(uint16_t) &PIND, |
| 185 |
(uint16_t) &PINE, |
| 186 |
(uint16_t) &PINF, |
| 187 |
}; |
| 188 |
|
| 189 |
const uint8_t PROGMEM digital_pin_to_port_PGM[30] = { |
| 190 |
PD, // D0 - PD2 |
| 191 |
PD, // D1 - PD3 |
| 192 |
PD, // D2 - PD1 |
| 193 |
PD, // D3 - PD0 |
| 194 |
PD, // D4 - PD4 |
| 195 |
PC, // D5 - PC6 |
| 196 |
PD, // D6 - PD7 |
| 197 |
PE, // D7 - PE6 |
| 198 |
|
| 199 |
PB, // D8 - PB4 |
| 200 |
PB, // D9 - PB5 |
| 201 |
PB, // D10 - PB6 |
| 202 |
PB, // D11 - PB7 |
| 203 |
PD, // D12 - PD6 |
| 204 |
PC, // D13 - PC7 |
| 205 |
|
| 206 |
PB, // D14 - MISO - PB3 |
| 207 |
PB, // D15 - SCK - PB1 |
| 208 |
PB, // D16 - MOSI - PB2 |
| 209 |
PB, // D17 - SS - PB0 |
| 210 |
|
| 211 |
PF, // D18 - A0 - PF7 |
| 212 |
PF, // D19 - A1 - PF6 |
| 213 |
PF, // D20 - A2 - PF5 |
| 214 |
PF, // D21 - A3 - PF4 |
| 215 |
PF, // D22 - A4 - PF1 |
| 216 |
PF, // D23 - A5 - PF0 |
| 217 |
|
| 218 |
PD, // D24 / D4 - A6 - PD4 |
| 219 |
PD, // D25 / D6 - A7 - PD7 |
| 220 |
PB, // D26 / D8 - A8 - PB4 |
| 221 |
PB, // D27 / D9 - A9 - PB5 |
| 222 |
PB, // D28 / D10 - A10 - PB6 |
| 223 |
PD, // D29 / D12 - A11 - PD6 |
| 224 |
}; |
| 225 |
|
| 226 |
const uint8_t PROGMEM digital_pin_to_bit_mask_PGM[30] = { |
| 227 |
_BV(2), // D0 - PD2 |
| 228 |
_BV(3), // D1 - PD3 |
| 229 |
_BV(1), // D2 - PD1 |
| 230 |
_BV(0), // D3 - PD0 |
| 231 |
_BV(4), // D4 - PD4 |
| 232 |
_BV(6), // D5 - PC6 |
| 233 |
_BV(7), // D6 - PD7 |
| 234 |
_BV(6), // D7 - PE6 |
| 235 |
|
| 236 |
_BV(4), // D8 - PB4 |
| 237 |
_BV(5), // D9 - PB5 |
| 238 |
_BV(6), // D10 - PB6 |
| 239 |
_BV(7), // D11 - PB7 |
| 240 |
_BV(6), // D12 - PD6 |
| 241 |
_BV(7), // D13 - PC7 |
| 242 |
|
| 243 |
_BV(3), // D14 - MISO - PB3 |
| 244 |
_BV(1), // D15 - SCK - PB1 |
| 245 |
_BV(2), // D16 - MOSI - PB2 |
| 246 |
_BV(0), // D17 - SS - PB0 |
| 247 |
|
| 248 |
_BV(7), // D18 - A0 - PF7 |
| 249 |
_BV(6), // D19 - A1 - PF6 |
| 250 |
_BV(5), // D20 - A2 - PF5 |
| 251 |
_BV(4), // D21 - A3 - PF4 |
| 252 |
_BV(1), // D22 - A4 - PF1 |
| 253 |
_BV(0), // D23 - A5 - PF0 |
| 254 |
|
| 255 |
_BV(4), // D24 / D4 - A6 - PD4 |
| 256 |
_BV(7), // D25 / D6 - A7 - PD7 |
| 257 |
_BV(4), // D26 / D8 - A8 - PB4 |
| 258 |
_BV(5), // D27 / D9 - A9 - PB5 |
| 259 |
_BV(6), // D28 / D10 - A10 - PB6 |
| 260 |
_BV(6), // D29 / D12 - A11 - PD6 |
| 261 |
}; |
| 262 |
|
| 263 |
const uint8_t PROGMEM digital_pin_to_timer_PGM[18] = { |
| 264 |
NOT_ON_TIMER, |
| 265 |
NOT_ON_TIMER, |
| 266 |
NOT_ON_TIMER, |
| 267 |
TIMER0B, /* 3 */ |
| 268 |
NOT_ON_TIMER, |
| 269 |
TIMER3A, /* 5 */ |
| 270 |
TIMER4D, /* 6 */ |
| 271 |
NOT_ON_TIMER, |
| 272 |
|
| 273 |
NOT_ON_TIMER, |
| 274 |
TIMER1A, /* 9 */ |
| 275 |
TIMER1B, /* 10 */ |
| 276 |
TIMER0A, /* 11 */ |
| 277 |
|
| 278 |
NOT_ON_TIMER, |
| 279 |
TIMER4A, /* 13 */ |
| 280 |
|
| 281 |
NOT_ON_TIMER, |
| 282 |
NOT_ON_TIMER, |
| 283 |
}; |
| 284 |
|
| 285 |
const uint8_t PROGMEM analog_pin_to_channel_PGM[12] = { |
| 286 |
7, // A0 PF7 ADC7 |
| 287 |
6, // A1 PF6 ADC6 |
| 288 |
5, // A2 PF5 ADC5 |
| 289 |
4, // A3 PF4 ADC4 |
| 290 |
1, // A4 PF1 ADC1 |
| 291 |
0, // A5 PF0 ADC0 |
| 292 |
8, // A6 D4 PD4 ADC8 |
| 293 |
10, // A7 D6 PD7 ADC10 |
| 294 |
11, // A8 D8 PB4 ADC11 |
| 295 |
12, // A9 D9 PB5 ADC12 |
| 296 |
13, // A10 D10 PB6 ADC13 |
| 297 |
9 // A11 D12 PD6 ADC9 |
| 298 |
}; |
| 299 |
|
| 300 |
#endif /* ARDUINO_MAIN */ |
| 301 |
|
| 302 |
// These serial port names are intended to allow libraries and architecture-neutral |
| 303 |
// sketches to automatically default to the correct port name for a particular type |
| 304 |
// of use. For example, a GPS module would normally connect to SERIAL_PORT_HARDWARE_OPEN, |
| 305 |
// the first hardware serial port whose RX/TX pins are not dedicated to another use. |
| 306 |
// |
| 307 |
// SERIAL_PORT_MONITOR Port which normally prints to the Arduino Serial Monitor |
| 308 |
// |
| 309 |
// SERIAL_PORT_USBVIRTUAL Port which is USB virtual serial |
| 310 |
// |
| 311 |
// SERIAL_PORT_LINUXBRIDGE Port which connects to a Linux system via Bridge library |
| 312 |
// |
| 313 |
// SERIAL_PORT_HARDWARE Hardware serial port, physical RX & TX pins. |
| 314 |
// |
| 315 |
// SERIAL_PORT_HARDWARE_OPEN Hardware serial ports which are open for use. Their RX & TX |
| 316 |
// pins are NOT connected to anything by default. |
| 317 |
#define SERIAL_PORT_MONITOR Serial |
| 318 |
#define SERIAL_PORT_USBVIRTUAL Serial |
| 319 |
#define SERIAL_PORT_HARDWARE Serial1 |
| 320 |
|
| 321 |
#endif /* Pins_Arduino_h */ |