| 1 |
/* |
| 2 |
* EEPROM Read |
| 3 |
* |
| 4 |
* Reads the value of each byte of the EEPROM and prints it |
| 5 |
* to the computer. |
| 6 |
* This example code is in the public domain. |
| 7 |
*/ |
| 8 |
|
| 9 |
#include <EEPROM.h> |
| 10 |
|
| 11 |
// start reading from the first byte (address 0) of the EEPROM |
| 12 |
int address = 0; |
| 13 |
byte value; |
| 14 |
|
| 15 |
void setup() { |
| 16 |
// initialize serial and wait for port to open: |
| 17 |
Serial.begin(9600); |
| 18 |
while (!Serial) { |
| 19 |
; // wait for serial port to connect. Needed for native USB port only |
| 20 |
} |
| 21 |
} |
| 22 |
|
| 23 |
void loop() { |
| 24 |
// read a byte from the current address of the EEPROM |
| 25 |
value = EEPROM.read(address); |
| 26 |
|
| 27 |
Serial.print(address); |
| 28 |
Serial.print("\t"); |
| 29 |
Serial.print(value, DEC); |
| 30 |
Serial.println(); |
| 31 |
|
| 32 |
/*** |
| 33 |
Advance to the next address, when at the end restart at the beginning. |
| 34 |
|
| 35 |
Larger AVR processors have larger EEPROM sizes, E.g: |
| 36 |
- Arduino Duemilanove: 512 B EEPROM storage. |
| 37 |
- Arduino Uno: 1 kB EEPROM storage. |
| 38 |
- Arduino Mega: 4 kB EEPROM storage. |
| 39 |
|
| 40 |
Rather than hard-coding the length, you should use the pre-provided length function. |
| 41 |
This will make your code portable to all AVR processors. |
| 42 |
***/ |
| 43 |
address = address + 1; |
| 44 |
if (address == EEPROM.length()) { |
| 45 |
address = 0; |
| 46 |
} |
| 47 |
|
| 48 |
/*** |
| 49 |
As the EEPROM sizes are powers of two, wrapping (preventing overflow) of an |
| 50 |
EEPROM address is also doable by a bitwise and of the length - 1. |
| 51 |
|
| 52 |
++address &= EEPROM.length() - 1; |
| 53 |
***/ |
| 54 |
|
| 55 |
delay(500); |
| 56 |
} |