Debian Codegraph @

libraries/EEPROM/examples/eeprom_get/eeprom_get.ino

raw
1 /***
2 eeprom_get example.
3
4 This shows how to use the EEPROM.get() method.
5
6 To pre-set the EEPROM data, run the example sketch eeprom_put.
7 This sketch will run without it, however, the values shown
8 will be shown from what ever is already on the EEPROM.
9
10 This may cause the serial object to print out a large string
11 of garbage if there is no null character inside one of the strings
12 loaded.
13
14 Written by Christopher Andrews 2015
15 Released under MIT licence.
16 ***/
17
18 #include <EEPROM.h>
19
20 void setup() {
21
22 float f = 0.00f; //Variable to store data read from EEPROM.
23 int eeAddress = 0; //EEPROM address to start reading from
24
25 Serial.begin(9600);
26 while (!Serial) {
27 ; // wait for serial port to connect. Needed for native USB port only
28 }
29 Serial.print("Read float from EEPROM: ");
30
31 //Get the float data from the EEPROM at position 'eeAddress'
32 EEPROM.get(eeAddress, f);
33 Serial.println(f, 3); //This may print 'ovf, nan' if the data inside the EEPROM is not a valid float.
34
35 /***
36 As get also returns a reference to 'f', you can use it inline.
37 E.g: Serial.print( EEPROM.get( eeAddress, f ) );
38 ***/
39
40 /***
41 Get can be used with custom structures too.
42 I have separated this into an extra function.
43 ***/
44
45 secondTest(); //Run the next test.
46 }
47
48 struct MyObject {
49 float field1;
50 byte field2;
51 char name[10];
52 };
53
54 void secondTest() {
55 int eeAddress = sizeof(float); //Move address to the next byte after float 'f'.
56
57 MyObject customVar; //Variable to store custom object read from EEPROM.
58 EEPROM.get(eeAddress, customVar);
59
60 Serial.println("Read custom object from EEPROM: ");
61 Serial.println(customVar.field1);
62 Serial.println(customVar.field2);
63 Serial.println(customVar.name);
64 }
65
66 void loop() {
67 /* Empty loop */
68 }