firmwares/atmegaxxu2/arduino-usbdfu/readme.txt
raw| 1 | To setup the project and program an ATMEG8U2 with the Arduino USB DFU bootloader: |
| 2 | 1. unpack the source into LUFA's Bootloader directory |
| 3 | 2. set ARDUINO_MODEL_PID in the makefile as appropriate |
| 4 | 3. do "make clean; make; make program" |
| 5 | |
| 6 | Check that the board enumerates as either "Arduino Uno DFU" or "Arduino Mega 2560 DFU". Test by uploading the Arduino-usbserial application firmware (see instructions in Arduino-usbserial directory) |
| 7 |