Debian Codegraph @

bootloaders/lilypad/src/Makefile

raw
1 # Makefile for ATmegaBOOT
2 # E.Lins, 18.7.2005
3
4 # Instructions
5 #
6 # To build the bootloader for the LilyPad:
7 # make lily
8
9
10 # program name should not be changed...
11 PROGRAM = ATmegaBOOT_168
12
13 # enter the target CPU frequency
14 AVR_FREQ = 8000000L
15
16 # enter the parameters for the avrdude isp tool
17 ISPTOOL = stk500v2
18 ISPPORT = usb
19 ISPSPEED = -b 115200
20
21 MCU_TARGET = atmega168
22 LDSECTION = --section-start=.text=0x3800
23
24 # the efuse should really be 0xf8; since, however, only the lower
25 # three bits of that byte are used on the atmega168, avrdude gets
26 # confused if you specify 1's for the higher bits, see:
27 # http://tinker.it/now/2007/02/24/the-tale-of-avrdude-atmega168-and-extended-bits-fuses/
28 #
29 # similarly, the lock bits should be 0xff instead of 0x3f (to
30 # unlock the bootloader section) and 0xcf instead of 0x0f (to
31 # lock it), but since the high two bits of the lock byte are
32 # unused, avrdude would get confused.
33 ISPFUSES = avrdude -c $(ISPTOOL) -p m168 -P $(ISPPORT) $(ISPSPEED) -e -u -U lock:w:0x3f:m -U efuse:w:0x00:m -U hfuse:w:0xdd:m -U lfuse:w:0xff:m
34 ISPFLASH = avrdude -c $(ISPTOOL) -p m168 -P $(ISPPORT) $(ISPSPEED) -U flash:w:$(PROGRAM)_$(TARGET).hex -U lock:w:0x0f:m
35
36
37 OBJ = $(PROGRAM).o
38 OPTIMIZE = -O2
39
40 DEFS =
41 LIBS =
42
43 CC = avr-gcc
44
45
46 # Override is only needed by avr-lib build system.
47
48 override CFLAGS = -g -Wall $(OPTIMIZE) -mmcu=$(MCU_TARGET) -DF_CPU=$(AVR_FREQ) $(DEFS)
49 override LDFLAGS = -Wl,$(LDSECTION)
50 #override LDFLAGS = -Wl,-Map,$(PROGRAM).map,$(LDSECTION)
51
52 OBJCOPY = avr-objcopy
53 OBJDUMP = avr-objdump
54
55 all:
56
57 lily: CFLAGS += '-DMAX_TIME_COUNT=F_CPU>>1' '-DNUM_LED_FLASHES=3'
58 lily: $(PROGRAM).hex
59
60 $(PROGRAM).hex: $(PROGRAM).elf
61 $(OBJCOPY) -j .text -j .data -O ihex $< $@
62
63 $(PROGRAM).elf: $(OBJ)
64 $(CC) $(CFLAGS) $(LDFLAGS) -o $@ $^ $(LIBS)
65
66 $(OBJ):
67 avr-gcc $(CFLAGS) $(LDFLAGS) -c -g -O2 -Wall -mmcu=atmega168 ATmegaBOOT.c -o ATmegaBOOT_168.o
68
69 %.lst: %.elf
70 $(OBJDUMP) -h -S $< > $@
71
72 %.srec: %.elf
73 $(OBJCOPY) -j .text -j .data -O srec $< $@
74
75 %.bin: %.elf
76 $(OBJCOPY) -j .text -j .data -O binary $< $@
77
78 clean:
79 rm -rf *.o *.elf *.lst *.map *.sym *.lss *.eep *.srec *.bin *.hex
80
81 install:
82 avrdude -p m168 -c stk500v2 -P /dev/cu.USA19H1b1P1.1 -e -u -U lock:w:0x3f:m -U efuse:w:0x00:m -U hfuse:w:0xdd:m -U lfuse:w:0xe2:m
83 avrdude -p m168 -c stk500v2 -P /dev/cu.USA19H1b1P1.1 -e -u -U flash:w:ATmegaBOOT_168.hex -U lock:w:0x0f:m