| 1 |
# Makefile |
| 2 |
|
| 3 |
# You can edit this file or override these variables on |
| 4 |
# the commandline. For example, "make install MANDIR=/tmp/man" |
| 5 |
# would use defaults for all variables except ${MANDIR}. |
| 6 |
|
| 7 |
|
| 8 |
# You can set this to something like /opt/aoetools-x |
| 9 |
# if you want to install everything in one place. |
| 10 |
# |
| 11 |
# Note that even with ${PREFIX} set, the devices in |
| 12 |
# /dev/etherd will be used unless you override ${DEVDIR}. |
| 13 |
PREFIX = |
| 14 |
|
| 15 |
# Your aoe-driver device files should be in ${DEVDIR}. |
| 16 |
DEVDIR = /dev/etherd |
| 17 |
|
| 18 |
# The programs will be installed in ${SBINDIR}. |
| 19 |
SBINDIR = ${PREFIX}/usr/sbin |
| 20 |
MANDIR = ${PREFIX}/usr/share/man |
| 21 |
|
| 22 |
# NPERSHELF is the number of slot addresses per shelf address. |
| 23 |
# This number must match the same setting in the aoe driver. |
| 24 |
# |
| 25 |
# Older aoe drivers have NPERSHELF set to 10, and newer ones |
| 26 |
# use 16. |
| 27 |
# |
| 28 |
# You can see the setting in your driver like this in the driver |
| 29 |
# source directory. (Change into the "linux" directory if you're |
| 30 |
# using the standalone driver from CORAID.) |
| 31 |
# |
| 32 |
# grep 'NPERSHELF.*=' drivers/block/aoe/aoe.h |
| 33 |
# |
| 34 |
NPERSHELF=16 |
| 35 |
|
| 36 |
# end of user-configurable variables |
| 37 |
|
| 38 |
|
| 39 |
# these scripts are created from the *.in files |
| 40 |
CONF_SCRIPTS = aoe-discover aoe-interfaces aoe-mkshelf aoe-revalidate aoe-flush aoe-stat |
| 41 |
PROGS = aoeping aoecfg aoe-sancheck |
| 42 |
COMMANDS := ${CONF_SCRIPTS} aoe-mkdevs aoe-version coraid-update ${PROGS} |
| 43 |
CFLAGS = -Wall -O -g |
| 44 |
SANCHECKLIBS = -lpthread |
| 45 |
|
| 46 |
AOE_PING_OBJ = aoeping.o linux.o |
| 47 |
AOE_CFG_OBJ = aoecfg.o linux.o |
| 48 |
SANCHECK_OBJ = aoe-sancheck.o |
| 49 |
|
| 50 |
all : configure ${PROGS} |
| 51 |
@true |
| 52 |
|
| 53 |
configure : |
| 54 |
@for f in ${CONF_SCRIPTS}; do \ |
| 55 |
sh -xc "sed -e 's!@devdir@!${DEVDIR}!g' -e 's!@npershelf@!${NPERSHELF}!g' $$f.in > $$f" || break; \ |
| 56 |
done |
| 57 |
|
| 58 |
# DESTDIR was put in for Rob Holland to make gentoo packaging easier |
| 59 |
install : all |
| 60 |
mkdir -p ${DESTDIR}${SBINDIR} |
| 61 |
mkdir -p ${DESTDIR}${MANDIR}/man8 |
| 62 |
@for f in ${COMMANDS}; do \ |
| 63 |
sh -xc "install -m 700 $$f ${DESTDIR}${SBINDIR}/$$f" || break; \ |
| 64 |
sh -xc "install -m 664 $$f.8 ${DESTDIR}${MANDIR}/man8/$$f.8" || break; \ |
| 65 |
done |
| 66 |
|
| 67 |
clean : |
| 68 |
rm -f ${CONF_SCRIPTS} ${AOE_PING_OBJ} ${AOE_CFG_OBJ} ${SANCHECK_OBJ} ${PROGS} |
| 69 |
|
| 70 |
aoeping : ${AOE_PING_OBJ} |
| 71 |
${CC} ${CFLAGS} -o $@ ${AOE_PING_OBJ} |
| 72 |
aoeping.o : aoeping.c dat.h fns.h |
| 73 |
${CC} ${CFLAGS} -o $@ -c $< |
| 74 |
linux.o : linux.c config.h |
| 75 |
${CC} ${CFLAGS} -o $@ -c $< |
| 76 |
aoecfg: ${AOE_CFG_OBJ} |
| 77 |
${CC} ${CFLAGS} -o $@ ${AOE_CFG_OBJ} |
| 78 |
aoecfg.o : aoecfg.c dat.h fns.h |
| 79 |
${CC} ${CFLAGS} -o $@ -c $< |
| 80 |
aoe-sancheck : ${SANCHECK_OBJ} |
| 81 |
-$(CC) $(CFLAGS) -o $@ ${SANCHECK_OBJ} $(SANCHECKLIBS) |
| 82 |
aoe-sancheck.o : aoe-sancheck.c |
| 83 |
-$(CC) $(CFLAGS) -o $@ -c $< |
| 84 |
|