| 1 |
#!/bin/bash |
| 2 |
|
| 3 |
PERF="rand_emmc_perf" |
| 4 |
PERF_LOC=/dev |
| 5 |
STATS_FILE="/data/local/tmp/stats_test" |
| 6 |
STATS_MODE=0 |
| 7 |
USERBUILD_MODE=0 |
| 8 |
|
| 9 |
if [ "$1" = "-s" ] |
| 10 |
then |
| 11 |
STATS_MODE=1 |
| 12 |
elif [ "$1" = "-u" ] |
| 13 |
then |
| 14 |
USERBUILD_MODE=1 |
| 15 |
fi |
| 16 |
|
| 17 |
if [ ! -r "$PERF" ] |
| 18 |
then |
| 19 |
echo "Cannot read $PERF test binary" |
| 20 |
fi |
| 21 |
|
| 22 |
if ! adb shell true >/dev/null 2>&1 |
| 23 |
then |
| 24 |
echo "No device detected over adb" |
| 25 |
fi |
| 26 |
|
| 27 |
HARDWARE=`adb shell getprop ro.hardware | tr -d "\r"` |
| 28 |
|
| 29 |
case "$HARDWARE" in |
| 30 |
tuna | steelhead) |
| 31 |
CPUFREQ="/sys/devices/system/cpu/cpu0/cpufreq" |
| 32 |
CACHE="/dev/block/platform/omap/omap_hsmmc.0/by-name/cache" |
| 33 |
MMCDEV="mmcblk0" |
| 34 |
;; |
| 35 |
|
| 36 |
stingray | wingray) |
| 37 |
CPUFREQ="/sys/devices/system/cpu/cpu0/cpufreq" |
| 38 |
CACHE="/dev/block/platform/sdhci-tegra.3/by-name/cache" |
| 39 |
MMCDEV="mmcblk0" |
| 40 |
;; |
| 41 |
|
| 42 |
herring) |
| 43 |
echo "This test will wipe the userdata partition on $HARDWARE devices." |
| 44 |
read -p "Do you want to proceed? " ANSWER |
| 45 |
|
| 46 |
if [ "$ANSWER" != "yes" ] |
| 47 |
then |
| 48 |
echo "aborting test" |
| 49 |
exit 1 |
| 50 |
fi |
| 51 |
|
| 52 |
CPUFREQ="/sys/devices/system/cpu/cpu0/cpufreq" |
| 53 |
CACHE="/dev/block/platform/s3c-sdhci.0/by-name/userdata" |
| 54 |
MMCDEV="mmcblk0" |
| 55 |
;; |
| 56 |
|
| 57 |
grouper) |
| 58 |
CPUFREQ="/sys/devices/system/cpu/cpu0/cpufreq" |
| 59 |
CACHE="/dev/block/platform/sdhci-tegra.3/by-name/CAC" |
| 60 |
MMCDEV="mmcblk0" |
| 61 |
;; |
| 62 |
|
| 63 |
manta) |
| 64 |
CPUFREQ="/sys/devices/system/cpu/cpu0/cpufreq" |
| 65 |
CACHE="/dev/block/platform/dw_mmc.0/by-name/cache" |
| 66 |
MMCDEV="mmcblk0" |
| 67 |
;; |
| 68 |
|
| 69 |
flo) |
| 70 |
CPUFREQ="/sys/devices/system/cpu/cpu0/cpufreq" |
| 71 |
CACHE="dev/block/platform/msm_sdcc.1/by-name/cache" |
| 72 |
MMCDEV="mmcblk0" |
| 73 |
;; |
| 74 |
|
| 75 |
*) |
| 76 |
echo "Unknown hardware $HARDWARE. Exiting." |
| 77 |
exit 1 |
| 78 |
esac |
| 79 |
|
| 80 |
# We cannot stop and unmount stuff in a user build, so don't even try. |
| 81 |
if [ "$USERBUILD_MODE" -eq 0 ] |
| 82 |
then |
| 83 |
# prepare the device |
| 84 |
adb root |
| 85 |
adb wait-for-device |
| 86 |
adb push "$PERF" /dev |
| 87 |
adb shell stop |
| 88 |
adb shell stop sdcard |
| 89 |
adb shell stop ril-daemon |
| 90 |
adb shell stop media |
| 91 |
adb shell stop drm |
| 92 |
adb shell stop keystore |
| 93 |
adb shell stop tf_daemon |
| 94 |
adb shell stop bluetoothd |
| 95 |
adb shell stop hciattach |
| 96 |
adb shell stop p2p_supplicant |
| 97 |
adb shell stop wpa_supplicant |
| 98 |
adb shell stop mobicore |
| 99 |
adb shell umount /sdcard >/dev/null 2>&1 |
| 100 |
adb shell umount /mnt/sdcard >/dev/null 2>&1 |
| 101 |
adb shell umount /mnt/shell/sdcard0 >/dev/null 2>&1 |
| 102 |
adb shell umount /mnt/shell/emulated >/dev/null 2>&1 |
| 103 |
adb shell umount /cache >/dev/null 2>&1 |
| 104 |
if [ "$STATS_MODE" -ne 1 ] |
| 105 |
then |
| 106 |
adb shell umount /data >/dev/null 2>&1 |
| 107 |
fi |
| 108 |
else |
| 109 |
# For user builds, put the $PERF binary in /data/local/tmp, |
| 110 |
# and also setup CACHE to point to a file on /data/local/tmp, |
| 111 |
# and create that file |
| 112 |
PERF_LOC=/data/local/tmp |
| 113 |
adb push "$PERF" "$PERF_LOC" |
| 114 |
CACHE=/data/local/tmp/testfile |
| 115 |
echo "Creating testfile for user builds (can take up to 60 seconds)" |
| 116 |
adb shell dd if=/dev/zero of=$CACHE bs=1048576 count=512 |
| 117 |
fi |
| 118 |
|
| 119 |
# Add more services here that other devices need to stop. |
| 120 |
# So far, this list is sufficient for: |
| 121 |
# Prime |
| 122 |
|
| 123 |
if [ "$USERBUILD_MODE" -eq 0 ] |
| 124 |
then |
| 125 |
# At this point, the device is quiescent, need to crank up the cpu speed, |
| 126 |
# then run tests |
| 127 |
adb shell "cat $CPUFREQ/cpuinfo_max_freq > $CPUFREQ/scaling_max_freq" |
| 128 |
adb shell "cat $CPUFREQ/cpuinfo_max_freq > $CPUFREQ/scaling_min_freq" |
| 129 |
fi |
| 130 |
|
| 131 |
# Start the tests |
| 132 |
|
| 133 |
if [ "$STATS_MODE" -eq 1 ] |
| 134 |
then |
| 135 |
# This test looks for the average and max random write times for the emmc |
| 136 |
# chip. It should be run with the emmc chip full for worst case numbers, |
| 137 |
# and after fstrim for best case numbers. So first fill the chip, twice, |
| 138 |
# then run the test, then remove the large file, run fstrim, and run the |
| 139 |
# test again. |
| 140 |
|
| 141 |
# Remove the test file if it exists, then make it anew. |
| 142 |
echo "Filling userdata" |
| 143 |
adb shell rm -f "$STATS_FILE" |
| 144 |
adb shell dd if=/dev/zero of="$STATS_FILE" bs=1048576 |
| 145 |
adb shell sync |
| 146 |
|
| 147 |
# Do it again to make sure to fill up all the reserved blocks used for |
| 148 |
# wear levelling, plus any unused blocks in the other partitions. Yes, |
| 149 |
# this is not precise, just a good heuristic. |
| 150 |
echo "Filling userdata again" |
| 151 |
adb shell rm "$STATS_FILE" |
| 152 |
adb shell sync |
| 153 |
adb shell dd if=/dev/zero of="$STATS_FILE" bs=1048576 |
| 154 |
adb shell sync |
| 155 |
|
| 156 |
# Run the test |
| 157 |
echo "Running stats test after filling emmc chip" |
| 158 |
adb shell /dev/$PERF -w -o -s 20000 -f /dev/full_stats 400 "$CACHE" |
| 159 |
|
| 160 |
# Remove the file, and have vold do fstrim |
| 161 |
adb shell rm "$STATS_FILE" |
| 162 |
adb shell sync |
| 163 |
# Make sure fstrim knows there is work to do |
| 164 |
sleep 10 |
| 165 |
|
| 166 |
# Get the current number of FSTRIM complete lines in thh logcat |
| 167 |
ORIGCNT=`adb shell logcat -d | grep -c "Finished fstrim work"` |
| 168 |
|
| 169 |
# Attempt to start fstrim |
| 170 |
OUT=`adb shell vdc fstrim dotrim | grep "Command not recognized"` |
| 171 |
|
| 172 |
if [ -z "$OUT" ] |
| 173 |
then |
| 174 |
# Wait till we see another fstrim finished line |
| 175 |
sleep 10 |
| 176 |
let T=10 |
| 177 |
NEWCNT=`adb shell logcat -d |grep -c "Finished fstrim work"` |
| 178 |
while [ "$NEWCNT" -eq "$ORIGCNT" ] |
| 179 |
do |
| 180 |
sleep 10 |
| 181 |
let T=T+10 |
| 182 |
if [ "$T" -ge 300 ] |
| 183 |
then |
| 184 |
echo "Error: FSTRIM did not complete in 300 seconds, continuing" |
| 185 |
break |
| 186 |
fi |
| 187 |
NEWCNT=`adb shell logcat -d |grep -c "Finished fstrim work"` |
| 188 |
done |
| 189 |
|
| 190 |
echo "FSTRIM took "$T" seconds" |
| 191 |
|
| 192 |
# Run the test again |
| 193 |
echo "Running test after fstrim" |
| 194 |
adb shell /dev/$PERF -w -o -s 20000 -f /dev/fstrimmed_stats 400 "$CACHE" |
| 195 |
|
| 196 |
# Retrieve the full data logs |
| 197 |
adb pull /dev/fstrimmed_stats $HARDWARE-fstrimmed_stats |
| 198 |
adb pull /dev/full_stats $HARDWARE-full_stats |
| 199 |
else |
| 200 |
echo "Device doesn't support fstrim, not running test a second time" |
| 201 |
fi |
| 202 |
|
| 203 |
else |
| 204 |
|
| 205 |
# Sequential read test |
| 206 |
if [ "$USERBUILD_MODE" -eq 0 ] |
| 207 |
then |
| 208 |
# There is no point in running this in USERBUILD mode, because |
| 209 |
# we can't drop caches, and the numbers are ludicrously high |
| 210 |
for I in 1 2 3 |
| 211 |
do |
| 212 |
adb shell "echo 3 > /proc/sys/vm/drop_caches" |
| 213 |
echo "Sequential read test $I" |
| 214 |
adb shell dd if="$CACHE" of=/dev/null bs=1048576 count=200 |
| 215 |
done |
| 216 |
fi |
| 217 |
|
| 218 |
# Sequential write test |
| 219 |
for I in 1 2 3 |
| 220 |
do |
| 221 |
echo "Sequential write test $I" |
| 222 |
# It's unclear if this test is useful on USERBUILDS, given the |
| 223 |
# caching on the filesystem |
| 224 |
adb shell dd if=/dev/zero conv=notrunc of="$CACHE" bs=1048576 count=200 |
| 225 |
done |
| 226 |
|
| 227 |
if [ "$USERBUILD_MODE" -eq 0 ] |
| 228 |
then |
| 229 |
# Random read tests require that we read from a much larger range of offsets |
| 230 |
# into the emmc chip than the write test. If we only read though 100 Megabytes |
| 231 |
# (and with a read-ahead of 128K), we quickly fill the buffer cache with 100 |
| 232 |
# Megabytes of data, and subsequent reads are nearly instantaneous. Since |
| 233 |
# reading is non-destructive, and we've never shipped a device with less than |
| 234 |
# 8 Gbytes, for this test we read from the raw emmc device, and randomly seek |
| 235 |
# in the first 6 Gbytes. That is way more memory than any device we currently |
| 236 |
# have and it should keep the cache from being poluted with entries from |
| 237 |
# previous random reads. |
| 238 |
# |
| 239 |
# Also, test with the read-ahead set very low at 4K, and at the default |
| 240 |
|
| 241 |
# Random read test, 4K read-ahead |
| 242 |
ORIG_READAHEAD=`adb shell cat /sys/block/$MMCDEV/queue/read_ahead_kb | tr -d "\r"` |
| 243 |
adb shell "echo 4 > /sys/block/$MMCDEV/queue/read_ahead_kb" |
| 244 |
for I in 1 2 3 |
| 245 |
do |
| 246 |
adb shell "echo 3 > /proc/sys/vm/drop_caches" |
| 247 |
echo "Random read (4K read-ahead) test $I" |
| 248 |
adb shell "$PERF_LOC"/"$PERF" -r 6000 "/dev/block/$MMCDEV" |
| 249 |
done |
| 250 |
|
| 251 |
# Random read test, default read-ahead |
| 252 |
adb shell "echo $ORIG_READAHEAD > /sys/block/$MMCDEV/queue/read_ahead_kb" |
| 253 |
for I in 1 2 3 |
| 254 |
do |
| 255 |
adb shell "echo 3 > /proc/sys/vm/drop_caches" |
| 256 |
echo "Random read (default read-ahead of ${ORIG_READAHEAD}K) test $I" |
| 257 |
adb shell "$PERF_LOC"/"$PERF" -r 6000 "/dev/block/$MMCDEV" |
| 258 |
done |
| 259 |
fi |
| 260 |
|
| 261 |
# Random write test |
| 262 |
for I in 1 2 3 |
| 263 |
do |
| 264 |
echo "Random write test $I" |
| 265 |
adb shell "$PERF_LOC"/"$PERF" -w 100 "$CACHE" |
| 266 |
done |
| 267 |
|
| 268 |
# Random write test with O_SYNC |
| 269 |
for I in 1 2 3 |
| 270 |
do |
| 271 |
echo "Random write with o_sync test $I" |
| 272 |
adb shell "$PERF_LOC"/"$PERF" -w -o 100 "$CACHE" |
| 273 |
done |
| 274 |
fi |
| 275 |
|
| 276 |
# cleanup |
| 277 |
if [ "$USERBUILD_MODE" -eq 0 ] |
| 278 |
then |
| 279 |
# Make a new empty /cache filesystem |
| 280 |
adb shell make_ext4fs -w "$CACHE" |
| 281 |
else |
| 282 |
adb shell rm -f "$CACHE" "$PERF_LOC"/"$PERF" |
| 283 |
fi |
| 284 |
|