| 1 |
# |
| 2 |
# IPIP tunnel & ampr-ripd startup example via /etc/network/interfaces |
| 3 |
# |
| 4 |
# |
| 5 |
# - Tunnel interface is named 'ampr0' |
| 6 |
# - Local WAN IP is 192.168.0.2 on eth1 |
| 7 |
# - AMPR routing table used is table 'default' |
| 8 |
# - gateway IP is 44.128.0.1 |
| 9 |
# |
| 10 |
|
| 11 |
auto ampr0 |
| 12 |
iface ampr0 inet static |
| 13 |
address 44.128.0.1 |
| 14 |
netmask 255.255.255.255 |
| 15 |
metric 100 |
| 16 |
pre-up ip tun add ampr0 mode ipip ttl 64 local 192.168.0.2 dev eth1 |
| 17 |
up ip route add default via 169.228.34.84 dev ampr0 onlink table default |
| 18 |
up ip rule add from 44.128.0.1 table default |
| 19 |
up ampr-ripd -s -t default -i ampr0 -m 90 -a 44.128.0.0/24 |
| 20 |
up ping -c 1 -I ampr0 44.0.0.1 > /dev/null 2>&1 |
| 21 |
pre-down ip route del default via 169.228.34.84 dev ampr0 onlink table default |
| 22 |
post-down killall ampr-ripd |
| 23 |
post-down ip rule del from 44.128.0.1 table default |
| 24 |
post-down ip tunnel del ampr0 |
| 25 |
post-down rmmod ipip |