| 1 |
amiga-fdisk 0.04 (consider this being unstable) |
| 2 |
|
| 3 |
This is an fdisk program for partioning harddrives using the Amiga |
| 4 |
Rigid Disk Block standard(RDB) It's in a very early stage. |
| 5 |
|
| 6 |
The most current release of amiga-fdisk can be obtained from: |
| 7 |
http://www.freiburg.linux.de/~stepan |
| 8 |
|
| 9 |
Amiga-fdisk is known to work on Linux systems with at least all kernels |
| 10 |
since 1.2.13. I suggest that you use at least a recent 2.0 kernel. |
| 11 |
|
| 12 |
Be careful! With amiga-fdisk, it is easy to erase your whole |
| 13 |
data within few seconds |
| 14 |
|
| 15 |
If you have a MBR on your harddisk, too, you should *NEVER* reorganize rdb to |
| 16 |
block 0 (or 1?) or the MBR gets lost. If you don't want to read your harddisks |
| 17 |
in a PC style workstation, this is very likely of no interest to you. |
| 18 |
|
| 19 |
Thanks to Frank Neumann and Leland for their ideas and help. |
| 20 |
Many thanks to Joerg Dorchain. He made the first attempt to write an |
| 21 |
amiga-fdisk and he allowed me to have a *very* close look at his code. |
| 22 |
In fact, I think some larger parts are stolen from his work. |
| 23 |
|
| 24 |
|
| 25 |
Look at the TODO-file if you feel inspired to work on amiga-fdisk. Feel |
| 26 |
free to ask me anything about the RDB interna. |
| 27 |
|
| 28 |
Please note: This program has been developed on an Intel box running |
| 29 |
Linux/x86, but I have tested it on my Amiga 3000 running Linux m68k |
| 30 |
quite often now. It works fine for me and it seems that it behaves |
| 31 |
equally on both little and big endianed platforms. |
| 32 |
|
| 33 |
This version is still ALPHA. It's to your responsibility |
| 34 |
if your data gets lost. (I am sorry for this, but of course I will try |
| 35 |
to help you, if your harddisks crash because of amiga-fdisk) |
| 36 |
|
| 37 |
For the Dostype-Choice, read the following: |
| 38 |
|
| 39 |
Cite from 'The Amiga Guru Book' from Ralph Babel, Page 561: |
| 40 |
|
| 41 |
de_DosType - The DOS type determines a disk's block structure; $444F5300 |
| 42 |
('DOS\0')identifies the old filesystem (default), $444F5301 ('DOS\1') the |
| 43 |
FastFileSystem, and $444F5302 ('DOS\2') and $444F5303 ('DOS\3') the new |
| 44 |
"international" versions thereof. It is used as the default DOS type by |
| 45 |
Format, as the 2.0 ROM filesystem is able to handle different formats |
| 46 |
(see section 17.1.50). The filesystem-private DOS-type identifier as |
| 47 |
stored in block 0 of a partition determines the actual block structure |
| 48 |
(see section 15.3.9). |
| 49 |
|
| 50 |
For DosEnvec structures that are part of the RDB, de_DosType is also used |
| 51 |
to indicate the type of partition data, e.g under Amiga-UNIX ( :-) ): |
| 52 |
|
| 53 |
UNI\0 - classic AT&T System-V filesystem |
| 54 |
UNI\1 - UNIX boot "filesystem" (dummy entry for Amiga OS's boot menu) |
| 55 |
UNI\2 - Berkeley filesystem for System V |
| 56 |
RESV - reserved (e.g. swap space) |
| 57 |
|
| 58 |
Under 2.0, FileSystem.resource entries exist for DOS\1, DOS\2, DOS\3 and |
| 59 |
UNI\1 (i.e all bootable "filesystems" other than DOS\0, which is always |
| 60 |
considered to be available as boot filesystem). As different revisions of |
| 61 |
Commodore's filesystems can handle different sets of partition formats, |
| 62 |
it is unclear wether de_DosType is used as an alias for the filesystem |
| 63 |
code to be used (e.g. during autobooting) or as an indicator as to which |
| 64 |
format the partition is in. Neither of these interpretations is fully |
| 65 |
consistent with the current usage and existing filesystems and may |
| 66 |
therefore cause problems. |
| 67 |
|
| 68 |
What follows up from this for now is: |
| 69 |
|
| 70 |
If you set the DosType of all your Linux partitions to RESV and Flags |
| 71 |
to noboot,nomount, they will not appear in the boot menu nor |
| 72 |
show up anyhow under Amiga OS. |
| 73 |
|
| 74 |
Set the DosType to RESV and Flags to noboot,mount if you want to share a |
| 75 |
partition (e.g swap) between Linux and AmigaDos without an appropriate |
| 76 |
filesystem (e.g. for use with VMM). This gives only the device name |
| 77 |
without a volume node -> no annoying "Not a Dos disk" icon. |
| 78 |
set the DosType to UNI\1, Flags to boot,mount (priority as desired) and |
| 79 |
BootBlocks to 2 of your Linux root partition for use of Amiga-LILO. |
| 80 |
So the partion will show up in the bootmenu but dissappear silently |
| 81 |
when booting AmigaDos from another partition. |
| 82 |
|
| 83 |
|
| 84 |
Stefan Reinauer, <[email protected]> |
| 85 |
|
| 86 |
November 1998. |