Debian Codegraph @

README.toshiba

raw
1 How to enable the ACPI daemon support for Toshiba ACPI enabled laptops
2 ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
3
4 If you have the acpi, acpid and acpi-support packages installed and are using
5 the linux kernel version 2.6.10 packages (or better) from Ubuntu then you can
6 enable support for passing the Toshiba hotkeys via the ACPI subsystem.
7
8 This allows acpid to automatically launch the relevant scripts when you hit
9 the hotkeys on your laptop.
10
11 The following keys are currently supported:
12
13 * The Lock key
14 * The suspend to RAM key (Also known as sleep)
15 * The suspend to DISK key (Also known as hibernate)
16 * The brightness up/down keys
17
18 The other hotkeys are passed through the acpi layer and you may be able to get
19 other programs which can listen to the acpi events and respond appropriately.
20
21 Note that if you enable this functionality then software such as fnfx will stop
22 working because they rely on older functionality for obtaining the hotkey
23 information from the kernel.
24
25 If you want to enable the acpi daemon support for Toshiba ACPI then do the
26 following simple set of operations.
27
28 Open a terminal and...
29
30 1. become root:
31 myuser@mymachine:~ $ sudo -s -H
32 Password: <enter your password here>
33 root@mymachine:~ #
34
35 (from now on I will simplify the root shell prompt to a single # symbol)
36 2. unload the current toshiba kernel module
37 # rmmod toshiba_acpi
38
39 (Don't worry if you get an error at this point)
40
41 3. create the configuration file
42 # cd /etc/modprobe.d
43 # cp /usr/share/doc/acpi-support/toshiba_acpi.modprobe .
44
45 4. attempt to load the toshiba support module again
46 # modprobe toshiba_acpi
47
48 5. check that the module loaded okay and enabled the hotkey support
49 # ps ax | grep ktoshkeyd
50
51 If you get no output from that command then the installation failed and
52 you should seek support on the ubuntu-users mailing list.
53
54 6. ensure that the hotkey support is now working
55 Try pressing Fn+<key with brightness symbols on it>
56
57 Your brightness should change appropriately. Again if you see no difference
58 then seek support on the ubuntu-users mailinglist.
59
60 7. ensure that the module will be loaded on boot
61 # grep toshiba_acpi /etc/modules
62
63 if you see no output from that command you should do:
64 # echo toshiba_acpi >> /etc/modules
65
66 That's it.
67
68 If you need any more support, please contact the ubuntu-users mailing list.
69
70
71 END
72
73
74 Document written by Daniel Silverstone <[email protected]>