Debian Codegraph @

dirsrvtests/tests/suites/resource_limits/fdlimits_test.py

raw
1 # --- BEGIN COPYRIGHT BLOCK ---
2 # Copyright (C) 2022 Red Hat, Inc.
3 # All rights reserved.
4 #
5 # License: GPL (version 3 or any later version).
6 # See LICENSE for details.
7 # --- END COPYRIGHT BLOCK ---
8 #
9 import logging
10 import pytest
11 import os
12 import ldap
13 from lib389.backend import Backends
14 from lib389._constants import *
15 from test389.topologies import topology_st
16 from lib389.utils import ds_is_older, ensure_str, is_fips
17 from subprocess import check_output
18
19 pytestmark = pytest.mark.tier1
20
21 logging.getLogger(__name__).setLevel(logging.INFO)
22 log = logging.getLogger(__name__)
23
24 FD_ATTR = "nsslapd-maxdescriptors"
25 RESRV_FD_ATTR = "nsslapd-reservedescriptors"
26 SLAPD_DEFAULT_MAXDESCRIPTORS = 1048576
27 SYSTEMD_LIMIT = ensure_str(check_output("systemctl show -p LimitNOFILE dirsrv@standalone1".split(" ")).strip()).split('=')[1]
28 # Server caps maxdescriptors at min(its own rlim_max, SLAPD_DEFAULT_MAXDESCRIPTORS); pytest's rlim_max is unrelated.
29 if SYSTEMD_LIMIT == "infinity":
30 MAX_FD_VAL = SLAPD_DEFAULT_MAXDESCRIPTORS
31 else:
32 MAX_FD_VAL = min(int(SYSTEMD_LIMIT), SLAPD_DEFAULT_MAXDESCRIPTORS)
33 CUSTOM_VAL = str(MAX_FD_VAL - 10)
34 RESRV_DESC_VAL_LOW = 10
35 TOO_HIGH_VAL = str(MAX_FD_VAL + 1)
36 TOO_HIGH_VAL2 = str(MAX_FD_VAL + 1)
37 TOO_LOW_VAL = "0"
38
39 @pytest.mark.skipif(ds_is_older("1.4.1.2"), reason="Not implemented")
40 def test_fd_limits(topology_st):
41 """Test the default limits, and custom limits
42
43 :id: fa0a5106-612f-428f-84c0-9c85c34d0433
44 :setup: Standalone Instance
45 :steps:
46 1. Check default limit
47 2. Change default limit
48 3. Check invalid/too high limits are rejected
49 4. Check invalid/too low limit is rejected
50 :expectedresults:
51 1. Success
52 2. Success
53 3. Success
54 4. Success
55 """
56
57 # Check systemd default
58 max_fd = topology_st.standalone.config.get_attr_val_utf8(FD_ATTR)
59 assert max_fd == str(MAX_FD_VAL)
60
61 # Check custom value is applied
62 topology_st.standalone.config.set(FD_ATTR, CUSTOM_VAL)
63 max_fd = topology_st.standalone.config.get_attr_val_utf8(FD_ATTR)
64 assert max_fd == CUSTOM_VAL
65
66 # # Attempt to use value that is higher than the global system limit
67 with pytest.raises(ldap.UNWILLING_TO_PERFORM):
68 topology_st.standalone.config.set(FD_ATTR, TOO_HIGH_VAL)
69 max_fd = topology_st.standalone.config.get_attr_val_utf8(FD_ATTR)
70 assert max_fd == CUSTOM_VAL
71
72 # Attempt to use value that is higher than the value defined in the systemd service
73 with pytest.raises(ldap.UNWILLING_TO_PERFORM):
74 topology_st.standalone.config.set(FD_ATTR, TOO_HIGH_VAL2)
75 max_fd = topology_st.standalone.config.get_attr_val_utf8(FD_ATTR)
76 assert max_fd == CUSTOM_VAL
77
78 # Attempt to use val that is too low
79 with pytest.raises(ldap.OPERATIONS_ERROR):
80 topology_st.standalone.config.set(FD_ATTR, TOO_LOW_VAL)
81 max_fd = topology_st.standalone.config.get_attr_val_utf8(FD_ATTR)
82 assert max_fd == CUSTOM_VAL
83
84 log.info("test_fd_limits PASSED")
85
86 @pytest.mark.skipif(ds_is_older("1.4.1.2"), reason="Not implemented")
87 def test_reserve_descriptor_validation(topology_st):
88 """Test the reserve descriptor self check
89
90 :id: 9bacdbcc-7754-4955-8a56-1d8c82bce274
91 :setup: Standalone Instance
92 :steps:
93 1. Set attr nsslapd-reservedescriptors to a low value (10)
94 2. Verify low value has been set
95 3. Restart instance (On restart the reservedescriptor attr will be validated)
96 4. Verify corrected value for nsslapd-reservedescriptors > low value
97 :expectedresults:
98 1. Success
99 2. A value of RESRV_DESC_VAL_LOW (10) is returned
100 3. Success
101 4. Corrected value for nsslapd-reservedescriptors > low value
102 """
103
104 # Set nsslapd-reservedescriptors to a low value (10)
105 topology_st.standalone.config.set(RESRV_FD_ATTR, str(RESRV_DESC_VAL_LOW))
106 resrv_fd = int(topology_st.standalone.config.get_attr_val_utf8(RESRV_FD_ATTR))
107 assert resrv_fd == RESRV_DESC_VAL_LOW
108
109 # An instance restart triggers a validation of the configured nsslapd-reservedescriptors attribute
110 topology_st.standalone.restart()
111
112 # Get the corrected value
113 corrected_fd = int(topology_st.standalone.config.get_attr_val_utf8(RESRV_FD_ATTR))
114 assert corrected_fd > RESRV_DESC_VAL_LOW
115
116 log.info(f"test_reserve_descriptor_validation PASSED (corrected from {RESRV_DESC_VAL_LOW} to {corrected_fd})")
117
118 @pytest.mark.skipif(ds_is_older("1.4.1.2"), reason="Not implemented")
119 def test_reserve_descriptors_high(topology_st):
120 """Test setting reserve descriptor value to higher than average.
121
122 :id: 19c8991b-ef78-485e-bdf9-a0977fcbcd04
123 :setup: Standalone Instance
124 :steps:
125 1. Set attr nsslapd-maxdescriptors to the server's effective max
126 2. Verify value has been set
127 3. Set attr nsslapd-reservedescriptors to 2 less than nsslapd-maxdescriptors
128 4. Verify value has been set
129 5. Restart instance
130 :expectedresults:
131 1. Success
132 2. Value of MAX_FD_VAL is returned
133 3. Success
134 4. Value of MAX_FD_VAL - 2 is returned
135 5. Instance starts correctly
136 """
137
138 # Set nsslapd-maxdescriptors to a custom value
139 topology_st.standalone.config.set(FD_ATTR, str(MAX_FD_VAL))
140 max_fd = topology_st.standalone.config.get_attr_val_utf8(FD_ATTR)
141 assert max_fd == str(MAX_FD_VAL)
142
143 # Set nsslapd-reservedescriptors to 2 less than custom value
144 topology_st.standalone.config.set(RESRV_FD_ATTR, str(MAX_FD_VAL - 2))
145 resrv_fd = topology_st.standalone.config.get_attr_val_utf8(RESRV_FD_ATTR)
146 assert resrv_fd == str(MAX_FD_VAL - 2)
147
148 # Verify instance restart
149 topology_st.standalone.restart()
150 assert (topology_st.standalone.status())
151
152 log.info("test_reserve_descriptors_high PASSED")
153
154 if __name__ == '__main__':
155 # Run isolated
156 # -s for DEBUG mode
157 CURRENT_FILE = os.path.realpath(__file__)
158 pytest.main(["-s", CURRENT_FILE])