AboutDialogQt LinguistQt LinguistBatchTranslationDialogQt Linguist - Batch TranslationQt Linguist - 일괄 번역Options옵션Set translated entries to finished번역된 항목을 완료됨으로 표시Retranslate entries with existing translation이미 번역된 항목을 다시 번역Note that the modified entries will be reset to unfinished if 'Set translated entries to finished' above is unchecked'번역된 항목을 완료됨으로 표시'를 선택하지 않으면 수정된 항목은 완료되지 않음으로 표시됩니다Translate also finished entries완료된 항목도 다시 번역Phrase book preference선호하는 단어장Move up위로 이동Move down아래로 이동The batch translator will search through the selected phrase books in the order given above일괄 번역 과정에서 위에 지정한 순서대로 단어장을 사용합니다&Run실행(&R)Cancel취소Batch Translation of '%1' - Qt Linguist'%1'의 일괄 번역 - Qt LinguistSearching, please wait...검색 중, 기다려 주십시오...&Cancel취소(&C)Linguist batch translatorLinguist 일괄 번역 도구Batch translated %n entries항목 %n개를 일괄 번역했습니다DataModelThe translation file '%1' will not be loaded because it is empty.번역 파일 '%1'이(가) 비어 있으므로 불러올 수 없습니다.<qt>Duplicate messages found in '%1':<qt>'%1'에 중복된 메시지가 있음:<p>[more duplicates omitted]<p>[더 많은 항목 생략됨]<p>* ID: %1<p>* ID: %1<p>* Context: %1<br>* Source: %2<p>* 콘텍스트: %1<br>* 원본: %2<br>* Comment: %3<br>* 설명: %3Linguist does not know the plural rules for '%1'.
Will assume a single universal form.Linguist는 '%1'의 복수형을 알지 못합니다.
별도의 복수형이 없음을 가정합니다.Cannot create '%2': %1'%2'을(를) 만들 수 없음: %1%1 (%2)<language> (<country>)%1(%2)Universal Form단일 형태ErrorsViewAccelerator possibly superfluous in translation.번역된 메시지에 불필요한 가속기가 있습니다.Accelerator possibly missing in translation.번역된 메시지에 가속기가 빠졌습니다.Translation does not have same leading and trailing whitespace as the source text.번역된 메시지가 원본 메시지와 같은 공백 문자로 시작하거나 끝나지 않았습니다.Translation does not end with the same punctuation as the source text.번역된 메시지가 원본 메시지와 같은 문장 부호로 끝나지 않았습니다.A phrase book suggestion for '%1' was ignored.단어장에서 제안한 '%1'을(를) 무시했습니다.Translation does not refer to the same place markers as in the source text.번역된 메시지와 원본 메시지의 자리 표시자가 일치하지 않습니다.Translation does not contain the necessary %n/%Ln place marker.필요한 %n/%Ln개의 자리 표시자가 번역된 메시지에 포함되지 않았습니다.Unknown error알 수 없는 오류FMTGNU Gettext localization filesGNU Gettext 번역 파일GNU Gettext localization template filesGNU Gettext 번역 템플릿 파일Compiled Qt translations컴파일된 Qt 번역Qt Linguist 'Phrase Book'Qt Linguist '단어장'Qt translation sourcesQt 번역 원본XLIFF localization filesXLIFF 번역 파일FindDialogFind찾기This window allows you to search for some text in the translation source file.번역 원본 파일의 텍스트를 찾을 수 있습니다.&Find what:찾을 문자열(&F):Type in the text to search for.찾을 문자열을 입력하십시오.Options옵션Source texts are searched when checked.선택하면 원본 텍스트에서 찾습니다.&Source texts원본 텍스트(&S)Translations are searched when checked.선택하면 번역된 텍스트에서 찾습니다.&Translations번역(&T)Texts such as 'TeX' and 'tex' are considered as different when checked.선택하면 'TeX'와 'tex'를 다른 문자열로 취급합니다.&Match case대소문자 구분(&M)Comments and contexts are searched when checked.선택하면 주석과 콘텍스트에서 찾습니다.&Comments주석(&C)Ignore &accelerators가속기 무시(&A)Click here to find the next occurrence of the text you typed in.입력한 텍스트가 다음에 등장하는 곳을 찾습니다.Find Next다음 찾기Click here to close this window.이 창을 닫습니다.Cancel취소Choose Edit|Find from the menu bar or press Ctrl+F to pop up the Find dialogObsoleted messages are skipped when checked.선택하면 검색할 때 오래된 메시지를 건너뜁니다.Skip &obsolete오래된 항목 건너뛰기(&O)Lets you use a Perl-compatible regular expressionPerl 호환 정규 표현식을 사용할 수 있도록 합니다Regular &expression정규 표현식(&E)FormMultiWidgetAlt+Deletetranslate, but don't changeAlt+DeleteShift+Alt+Inserttranslate, but don't changeShift+Alt+InsertAlt+Inserttranslate, but don't changeAlt+InsertConfirmation - Qt Linguist확인 - Qt LinguistDelete non-empty length variant?내용이 있는 길이가 다른 형태를 삭제하시겠습니까?LReleaseDropped %n message(s) which had no ID.ID가 없는 메시지 %n개를 삭제했습니다.Excess context/disambiguation dropped from %n message(s).메시지 %n개에서 불필요한 콘텍스트/동음이의 정보를 삭제했습니다. Generated %n translation(s) (%1 finished and %2 unfinished) %n개의 번역 생성됨(%1개 완료됨, %2개 완료되지 않음) Ignored %n untranslated source text(s) %n개의 번역되지 않은 원문 무시함MainWindowMainWindowMainWindow&Phrases단어장(&P)&Close Phrase Book단어장 닫기(&C)&Edit Phrase Book단어장 편집(&E)&Print Phrase Book단어장 인쇄(&P)V&alidation검사(&A)&View보기(&V)Vie&ws보기(&W)&Toolbars도구 모음(&T)&Help도움말(&H)&Translation번역(&T)&File파일(&F)Recently Opened &Files최근에 연 파일(&F)&Edit편집(&E)&Open...열기(&O)...Open a Qt translation source file (TS file) for editing편집할 Qt 번역 원본 파일(TS 파일)을 엽니다Ctrl+OCtrl+OE&xit끝내기(&X)Close this window and exit.이 창을 닫고 종료합니다.Ctrl+QCtrl+QSave저장Save changes made to this Qt translation source fileQt 번역 원본 파일을 저장합니다Save &As...다른 이름으로 저장(&A)...Save As...다른 이름으로 저장...Save changes made to this Qt translation source file into a new file.변경된 Qt 번역 원본 파일을 다른 이름으로 저장합니다.Release배포Create a Qt message file suitable for released applications from the current message file.현재 메시지 파일을 프로그램에 사용할 수 있는 형태로 배포합니다.&Print...인쇄(&P)...Print a list of all the translation units in the current translation source file.번역 원본 파일에 있는 모든 번역 단위 목록을 인쇄합니다.Ctrl+PCtrl+P&Undo실행 취소(&U)Undo the last editing operation performed on the current translation.현재 번역물에 실행한 마지막 작업을 취소합니다.Ctrl+ZCtrl+Z&Redo다시 실행(&R)Redo an undone editing operation performed on the translation.마지막으로 취소한 작업을 다시 실행합니다.Ctrl+YCtrl+YCu&t잘라내기(&T)Copy the selected translation text to the clipboard and deletes it.선택한 텍스트를 클립보드로 복사하고 입력 창에서 삭제합니다.Ctrl+XCtrl+X&Copy복사(&C)Copy the selected translation text to the clipboard.선택한 텍스트를 클립보드에 복사합니다.Ctrl+CCtrl+C&Paste붙여넣기(&P)Paste the clipboard text into the translation.클립보드에 있는 텍스트를 붙여 넣습니다.Ctrl+VCtrl+VSelect &All모두 선택(&A)Select the whole translation text.모든 번역 메시지를 선택합니다.Ctrl+ACtrl+A&Find...찾기(&F)...Search for some text in the translation source file.번역 원본 파일의 텍스트를 찾습니다.Ctrl+FCtrl+FFind &Next다음 찾기(&N)Continue the search where it was left.입력한 문자열이 다음에 나오는 곳을 찾습니다.F3F3&Prev Unfinished이전 미완료(&P)Previous unfinished item이전 미완료 항목Move to the previous unfinished item.이전 미완료 항목으로 이동합니다.Ctrl+KCtrl+K&Next Unfinished다음 미완료(&N)Next unfinished item다음 미완료 항목Move to the next unfinished item.다음 미완료 항목으로 이동합니다.Ctrl+JCtrl+JP&rev이전(&R)Move to previous item이전 항목으로 이동Move to the previous item.이전 항목으로 이동합니다.Ctrl+Shift+KCtrl+Shift+KNe&xt다음(&X)Next item다음 항목Move to the next item.다음 항목으로 이동합니다.Ctrl+Shift+JCtrl+Shift+J&Done and Next완료 표시 후 다음(&D)Mark item as done and move to the next unfinished item항목을 완료된 것으로 표시하고 다음 미완료 항목으로 이동Mark this item as done and move to the next unfinished item.항목을 완료된 것으로 표시하고 다음 미완료 항목으로 이동합니다.Copy from source text원본 텍스트 복사Copies the source text into the translation field원본 텍스트를 번역문으로 복사Copies the source text into the translation field.원본 텍스트를 번역문으로 복사합니다.Ctrl+BCtrl+B&Accelerators가속기(&A)&Ending Punctuation끝맺는 문장 부호(&E)&Phrase matches단어장 일치(&P)Place &Marker Matches자리 표시자 일치(&M)&New Phrase Book...새 단어장(&N)...Create a new phrase book.새 단어장을 만듭니다.Ctrl+NCtrl+N&Open Phrase Book...단어장 열기(&O)...Open a phrase book to assist translation.번역을 돕는 단어장을 엽니다.Ctrl+HCtrl+H&Reset Sorting정렬 초기화(&R)Sort the items back in the same order as in the message file.항목 정렬을 메시지 파일 순서로 초기화합니다.&Display guesses추측 표시(&D)Set whether or not to display translation guesses.번역 추측을 표시할 지 여부입니다.&Statistics통계(&S)Display translation statistics.번역 통계를 표시합니다.&Manual도움말(&M)F1F1About Qt LinguistQt Linguist 정보About QtQt 정보&What's This?이것에 대한 설명(&W)What's This?항목별 도움말Enter What's This? mode.항목별 도움말을 표시합니다.Shift+F1Shift+F1&Search And Translate...찾아서 번역(&S)...Replace the translation on all entries that matches the search source text.원본 텍스트가 찾을 텍스트와 일치하는 모든 항목을 찾아서 번역합니다.&Batch Translation...일괄 번역(&B)...Batch translate all entries using the information in the phrase books.단어장의 정보를 사용하여 일괄적으로 번역합니다.Release As...다른 이름으로 배포...Create a Qt message file suitable for released applications from the current message file. The filename will automatically be determined from the name of the TS file.현재 메시지 파일을 프로그램에 사용할 수 있는 형태로 배포합니다. 파일 이름은 TS 파일 이름에서 자동으로 정해집니다.File파일Edit편집Translation번역Validation검사Help도움말Open/Refresh Form &Preview폼 미리 보기 열기/새로 고침(&P)Form Preview Tool폼 미리 보기 도구F5F5Translation File &Settings...번역 파일 설정(&S)...&Add to Phrase Book단어장에 추가(&A)Ctrl+TCtrl+TOpen Read-O&nly...읽기 전용으로 열기(&N)...&Save All모두 저장(&S)Ctrl+SCtrl+S&Release All모두 배포(&R)Close닫기&Close All모두 닫기(&C)Ctrl+WCtrl+WLength Variants다른 길이 문자열This is the application's main window.Source text원본 텍스트Index인덱스Context콘텍스트Items항목This panel lists the source contexts.이 패널은 원본 콘텍스트 목록입니다.Strings문자열Phrases and guesses단어장과 추측Sources and Forms원본 코드와 폼Warnings경고 MOD status bar: file(s) modified수정됨Loading...불러오는 중...Loading File - Qt Linguist파일 불러오기 - Qt LinguistThe file '%1' does not seem to be related to the currently open file(s) '%2'.
Close the open file(s) first?파일 '%1'이(가) 현재 열려 있는 파일 '%2'와(과) 관련이 없는 것 같습니다.
열려 있는 파일을 닫으시겠습니까?The file '%1' does not seem to be related to the file '%2' which is being loaded as well.
Skip loading the first named file?파일 '%1'이(가) 같이 열려고 하는 파일 '%2'와(과) 관련이 없는 것 같습니다.
첫 번째 파일을 열지 않으시겠습니까?%n translation unit(s) loaded.번역 단위 %n개를 불러 왔습니다.Related files (%1);;관련된 파일 (%1);;Open Translation Files번역 파일 열기File saved.파일을 저장했습니다.Qt message files for released applications (*.qm)
All files (*)배포된 프로그램용 Qt 메시지 파일 (*.qm)
모든 파일 (*)File created.파일을 생성했습니다.Printing...인쇄 중...Context: %1콘텍스트: %1finished완료됨unresolved해결되지 않음obsolete오래됨Printing... (page %1)인쇄 중...(%1쪽)Printing completed인쇄가 완료되었습니다Printing aborted인쇄가 중단되었습니다Search wrapped.검색이 다시 시작되었습니다.Qt LinguistQt LinguistCannot find the string '%1'.문자열 '%1'을(를) 찾을 수 없습니다.Search And Translate in '%1' - Qt Linguist'%1'에서 찾아서 번역하기 - Qt LinguistTranslate - Qt Linguist번역 - Qt LinguistTranslated %n entry(s)항목 %n개를 번역했습니다No more occurrences of '%1'. Start over?'%1'을(를) 더 이상 찾을 수 없습니다. 처음부터 다시 시작하시겠습니까?Create New Phrase Book새 단어장 만들기Qt phrase books (*.qph)
All files (*)Qt 단어장 (*.qph)
모든 파일 (*)Phrase book created.단어장을 만들었습니다.Open Phrase Book단어장 열기Qt phrase books (*.qph);;All files (*)Qt 단어장 (*.qph);;모든 파일 (*)%n phrase(s) loaded.단어 %n개를 불러왔습니다.Add to phrase book단어장에 추가No appropriate phrasebook found.사용 가능한 단어장이 없습니다.Adding entry to phrasebook %1단어장 %1에 항목 추가Select phrase book to add to추가할 단어장 선택Unable to launch Qt Assistant (%1)Qt Assistant(%1)를 실행할 수 없습니다Version %1버전 %1Qt Linguist is a tool for adding translations to Qt applications.Qt Linguist는 Qt 프로그램을 번역하는 도구입니다.Copyright (C) %1 The Qt Company Ltd.Copyright (C) %1 The Qt Company Ltd.Do you want to save the modified files?수정된 파일을 저장하시겠습니까?Do you want to save '%1'?'%1'을(를) 저장하시겠습니까?Qt Linguist[*]Qt Linguist[*]%1[*] - Qt Linguist%1[*] - Qt LinguistNo untranslated translation units left.모든 번역 단위가 번역되었습니다.&Window창(&W)Minimize최소화Ctrl+MCtrl+MDisplay the manual for %1.%1의 도움말을 표시합니다.Display information about %1.%1의 정보를 표시합니다.&Save '%1''%1' 저장(&S)Save '%1' &As...'%1' 다른 이름으로 저장(&A)...Release '%1''%1' 배포Release '%1' As...'%1' 다른 이름으로 배포...&Close '%1''%1' 닫기(&C)&Save저장(&S)&Close닫기(&C)Save All모두 저장Close All모두 닫기&Release배포(&R)Translation File &Settings for '%1'...'%1'의 번역 파일 설정(&S)...&Batch Translation of '%1'...'%1' 일괄 번역(&B)...Search And &Translate in '%1'...'%1'에서 찾아서 번역(&T)...Search And &Translate...찾아서 번역(&T)...Cannot read from phrase book '%1'.단어장 '%1'에서 읽을 수 없습니다.Close this phrase book.이 단어장을 닫습니다.Enables you to add, modify, or delete entries in this phrase book.단어장의 항목을 추가, 수정, 삭제할 수 있습니다.Print the entries in this phrase book.이 단어장의 항목을 인쇄합니다.Cannot create phrase book '%1'.단어장 '%1'을(를) 만들 수 없습니다.Do you want to save phrase book '%1'?단어장 '%1'을(를) 저장하시겠습니까?%n unfinished message(s) left.미완료 항목 %n개가 남아 있습니다.All모두&Zoom확대/축소(&Z)Display information about the Qt toolkit by Digia.Qt 툴킷의 정보를 표시합니다.Visualize whitespace공백 문자 시각화Increase확대Ctrl++Ctrl++Decrease축소Ctrl+-Ctrl+-Reset to default기본값으로 초기화Ctrl+0Ctrl+0Guesses추측Toggles the validity check of accelerators가속기 키 유효성 검사 활성화/비활성화Toggles the validity check of accelerators, i.e. whether the number of ampersands in the source and translation text is the same. If the check fails, a message is shown in the warnings window.가속기 키 검사를 켜거나 끕니다. 검사가 켜져 있으면 원문과 번역문의 & 기호 개수가 똑같은지 검사합니다. 검사가 실패하면 경고 창에 메시지를 표시합니다.Surrounding &Whitespace둘러싸는 공백 문자(&W)Toggles the validity check of surrounding whitespace.둘러싸는 공백 문자 검사를 켜거나 끕니다.Toggles the validity check of surrounding whitespace. If the check fails, a message is shown in the warnings window.둘러싸는 공백 문자 검사를 켜거나 끕니다. 검사가 실패하면 경고 창에 메시지를 표시합니다.Toggles the validity check of ending punctuation끝맺는 문장 부호 유효성 검사 활성화/비활성화Toggles the validity check of ending punctuation. If the check fails, a message is shown in the warnings window.원문과 번역문의 끝맺는 문장 부호가 서로 같은지 검사합니다. 검사가 실패하면 경고 창에 메시지를 표시합니다.Toggles checking that phrase suggestions are used단어장에서 제안한 단어 사용 여부 검사 활성화/비활성화Toggles checking that phrase suggestions are used. If the check fails, a message is shown in the warnings window.단어장에서 제안한 단어를 사용했는지 여부를 검사합니다. 검사가 실패하면 경고 창에 메시지를 표시합니다.Toggles the validity check of place markers자리 표시자 일치 검사 활성화/비활성화Toggles the validity check of place markers, i.e. whether %1, %2, ... are used consistently in the source text and translation text. If the check fails, a message is shown in the warnings window.원문과 번역문에 있는 %1, %2, ...과 같은 자리 표시자가 올바르게 사용되었는지 검사합니다. 검사가 실패하면 경고 창에 메시지를 표시합니다.Toggles visualize whitespace in editors편집기에서 공백 문자 표시를 켜거나 끕니다Show more더 보기Alt++Alt++Show fewer덜 보기Alt+-Alt+-Alt+0Alt+0D&one완료 표시(&O)Mark item as done항목을 완료된 것으로 표시Mark this item as done.항목을 완료된 것으로 표시합니다.MessageEditorThis is the right panel of the main window.This whole panel allows you to view and edit the translation of some source text.이 패널에서는 원본 텍스트의 번역을 보거나 편집할 수 있습니다.Source text원본 텍스트This area shows the source text.이 영역은 원본 텍스트를 표시합니다.Source text (Plural)원본 텍스트(복수형)This area shows the plural form of the source text.이 영역은 원본 텍스트의 복수형을 표시합니다.Developer comments개발자 주석This area shows a comment that may guide you, and the context in which the text occurs.이 영역은 개발자가 입력한 설명이나 텍스트가 나오는 상황을 알려 줍니다.Here you can enter comments for your own use. They have no effect on the translated applications.역자주를 입력할 수 있습니다. 번역된 프로그램에는 나타나지 않습니다.Translation to %1 (%2)%1(%2) 번역Translation to %1%1 번역Translator comments for %1%1 역자주This is where you can enter or modify the translation of the above source text.원본 텍스트의 번역을 입력하거나 수정할 수 있습니다.'%1'
Line: %2'%1'
줄: %2MessageModelCompletion status for %1%1의 번역 상태<file header><파일 헤더><context comment><콘텍스트 주석><unnamed context><이름 없는 콘텍스트>%n unfinished message(s) left.미완료 항목 %n개가 남아 있습니다.PhraseBookParse error at line %1, column %2 (%3).%1번째 줄, %2번째 칸에서 처리 오류 발생(%3).PhraseBookBoxEdit Phrase Book단어장 편집This window allows you to add, modify, or delete entries in a phrase book.단어장의 항목을 추가, 수정, 삭제할 수 있습니다.&Translation:번역(&T):This is the phrase in the target language corresponding to the source phrase.원문의 대상 언어로 된 번역문입니다.S&ource phrase:원문(&O):This is a definition for the source phrase.원문의 정의입니다.This is the phrase in the source language.원문 텍스트입니다.&Definition:정의(&D):Click here to add the phrase to the phrase book.단어장에 단어를 추가하려면 누르십시오.&New Entry새 항목(&N)Click here to remove the entry from the phrase book.단어장에서 항목을 삭제하려면 누르십시오.&Remove Entry항목 삭제(&R)Settin&gs...설정(&G)...Click here to save the changes made.변경 사항을 저장하려면 누르십시오.&Save저장(&S)Click here to close this window.이 창을 닫으려면 누르십시오.Close닫기Go to Phrase > Edit Phrase Book... The dialog that pops up is a PhraseBookBox.(New Entry)(새 항목)%1[*] - Qt Linguist%1[*] - Qt LinguistQt LinguistQt LinguistCannot save phrase book '%1'.단어장 '%1'을(를) 저장할 수 없습니다.PhraseModelSource phrase원문Translation번역Definition정의PhraseViewInsert삽입Edit편집Go to다음으로 이동Guess from '%1' (%2)'%1'에서 추측함(%2)Guess from '%1''%1'에서 추측함QObjectTranslation files (%1);;번역 파일 (%1);;All files (*)모든 파일 (*)Qt LinguistQt LinguistSourceCodeView<i>Source code not available</i><i>원본 코드를 사용할 수 없음</i><i>File %1 not available</i><i>파일 %1을(를) 사용할 수 없음</i><i>File %1 not readable</i><i>파일 %1에서 읽을 수 없음</i>StatisticsStatistics통계Close닫기Translation번역Source원문00Words:단어 수:Characters:글자 수:Characters (with spaces):글자 수(공백 포함):TranslateDialogThis window allows you to search for some text in the translation source file.번역 원본 파일의 텍스트를 찾을 수 있습니다.Type in the text to search for.검색할 텍스트를 입력하십시오.Find &source text:찾을 문자열(&S):&Translate to:다음으로 번역(&T):Search options찾기 옵션Texts such as 'TeX' and 'tex' are considered as different when checked.선택하면 'TeX'와 'tex'를 다른 문자열로 취급합니다.Match &case대소문자 구분(&C)Mark new translation as &finished새 번역을 완료됨으로 표시(&F)Click here to find the next occurrence of the text you typed in.입력한 텍스트가 다음에 등장하는 곳을 찾습니다.Find Next다음 찾기Translate번역Translate All모두 번역Click here to close this window.이 창을 닫으려면 누르십시오.Cancel취소TranslationSettingsDialogSource language원본 언어Language언어Country/Region국가/지역Target language대상 언어%1 (%2)<english> (<endonym>) (language and country names)%1(%2)Settings for '%1' - Qt Linguist'%1' 설정 - Qt LinguistAny Country임의의 국가