# # This file is part of the PyMeasure package. # # Copyright (c) 2013-2024 PyMeasure Developers # # Permission is hereby granted, free of charge, to any person obtaining a copy # of this software and associated documentation files (the "Software"), to deal # in the Software without restriction, including without limitation the rights # to use, copy, modify, merge, publish, distribute, sublicense, and/or sell # copies of the Software, and to permit persons to whom the Software is # furnished to do so, subject to the following conditions: # # The above copyright notice and this permission notice shall be included in # all copies or substantial portions of the Software. # # THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR # IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, # FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE # AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER # LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, # OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN # THE SOFTWARE. # from pymeasure.instruments import Instrument, SCPIUnknownMixin from pymeasure.instruments.validators import (strict_discrete_set, strict_range) class razorbillRP100(SCPIUnknownMixin, Instrument): """Represents Razorbill RP100 strain cell controller .. code-block:: python scontrol = razorbillRP100("ASRL/dev/ttyACM0::INSTR") scontrol.output_1 = True # turns output on scontrol.slew_rate_1 = 1 # sets slew rate to 1V/s scontrol.voltage_1 = 10 # sets voltage on output 1 to 10V """ def __init__(self, adapter, name="Razorbill RP100 Piezo Stack Powersupply", **kwargs): super().__init__( adapter, name, **kwargs ) self.timeout = 20 output_1 = Instrument.control("OUTP1?", "OUTP1 %d", """Control output of channel 1 on or off""", validator=strict_discrete_set, values={True: 1, False: 0}, map_values=True) output_2 = Instrument.control("OUTP2?", "OUTP2 %d", """Control output of channel 2 on or off""", validator=strict_discrete_set, values={True: 1, False: 0}, map_values=True) voltage_1 = Instrument.control("SOUR1:VOLT?", "SOUR1:VOLT %g", """Control the output voltage of channel 1""", validator=strict_range, values=[-230, 230]) voltage_2 = Instrument.control("SOUR2:VOLT?", "SOUR2:VOLT %g", """Control the output voltage of channel 2""", validator=strict_range, values=[-230, 230]) slew_rate_1 = Instrument.control( "SOUR1:VOLT:SLEW?", "SOUR1:VOLT:SLEW %g", """Control the source slew rate in volts/sec of channel 1""", validator=strict_range, values=[0.1 * 10e-3, 100 * 10e3] ) slew_rate_2 = Instrument.control( "SOUR2:VOLT:SLEW?", "SOUR2:VOLT:SLEW %g", """Control the source slew rate in volts/sec of channel 2""", validator=strict_range, values=[0.1 * 10e-3, 100 * 10e3] ) instant_voltage_1 = Instrument.measurement( "SOUR1:VOLT:NOW?", """Get the instantaneous output of source one in volts""" ) instant_voltage_2 = Instrument.measurement( "SOUR2:VOLT:NOW?", """Get the instantaneous output of source two in volts""" ) contact_voltage_1 = Instrument.measurement( "MEAS1:VOLT?", """Get the Voltage in volts present at the front panel output of channel 1""" ) contact_voltage_2 = Instrument.measurement( "MEAS2:VOLT?", """Get the Voltage in volts present at the front panel output of channel 2""" ) contact_current_1 = Instrument.measurement( "MEAS1:CURR?", """Get the current in amps present at the front panel output of channel 1""" ) contact_current_2 = Instrument.measurement( "MEAS2:CURR?", """Get the current in amps present at the front panel output of channel 2""" )