Shenzhen NEO Electronics (Neo-CoolCam) Light Switch (1 channel) http://www.openzwave.com/device-database/0258:108c:0003 https://szneo.com/en/products/show.php?id=201 images/shenzhen-neo/eu-1.png Set Z-Wave gateway into inclusion mode (refer to gateway user manual). Touch any button three times continuously within 1,5 seconds, then Light Switch will enter into inclusion mode. Meanwhile, LED light would flash red colour five time on and off alternately. Set Z-Wave gateway into exclusion mode (refer to gateway user manual). Touch any button three times continuously within 1,5 seconds, then Light Switch will enter into exclusion mode. Touch and hold any button for 10 seconds, then release the button. LEF lights would flash red (1CH:pink) color 5 times within 2s after resetting successfully. During the resetting process, please make sure the Light Switch is powered on all the time. https://szneo.com/en/products/show.php?id=201 CEPT (Europe) EU-1 https://szneo.com/en/products/show.php?id=202 U.S. / Canada / Mexico US-1 Initial version Added pictures, descriptions and metadata This parameter defines the on/off status of relay needs to be saved or not. The status will be saved when relay status is changed if this parameter is set to '1'; otherwise the relay stataus is not saved. The Light Switch will restore the relay On/Off status when is powered on again. This parameter defines the back light state of the touch button. This Parameter defines the relay state. The led will be turned on with pink color when the button is touched to turn on relay if this parameter is set to '1'. Otherwise the LED is off.