# Part of Odoo. See LICENSE file for full copyright and licensing details. from cups import Connection as CupsConnection, IPPError from itertools import groupby from urllib.parse import urlsplit, parse_qs, unquote from zeroconf import ( IPVersion, ServiceBrowser, ServiceStateChange, Zeroconf, ) import logging import pyudev import re import time from odoo.addons.iot_drivers.interface import Interface from odoo.addons.iot_drivers.main import iot_devices _logger = logging.getLogger(__name__) class PrinterInterface(Interface): connection_type = 'printer' _loop_delay = 20 # Default delay between calls to get_devices def __init__(self): super().__init__() self.start_time = time.time() self.printer_devices = {} self.conn = CupsConnection() self.PPDs = self.conn.getPPDs() def get_devices(self): discovered_devices = {} printers = self.conn.getPrinters() devices = self.conn.getDevices() # get and adjust configuration of printers already added in cups for printer_name, printer in printers.items(): path = printer.get('device-uri') if path and printer_name != self.get_identifier(path): device_class = 'direct' if 'usb' in path else 'network' printer.update({ 'already-configured': True, 'device-class': device_class, 'device-make-and-model': printer_name, # give name set in Cups 'device-id': '', }) devices.update({printer_name: printer}) # filter devices (both added and not added in cups) to show as detected by the IoT Box for path, device in devices.items(): identifier, device = self.process_device(path, device) url_is_supported = any(protocol in device["url"] for protocol in ['dnssd', 'lpd', 'socket']) model_is_valid = device["device-make-and-model"] != "Unknown" printer_is_usb = "direct" in device["device-class"] if (url_is_supported and model_is_valid) or printer_is_usb: discovered_devices.update({identifier: device}) if not device.get("already-configured"): self.set_up_printer_in_cups(device) # Let get_devices be called again every 20 seconds (get_devices of PrinterInterface # takes between 4 and 15 seconds) but increase the delay to 2 minutes if it has been # running for more than 1 hour if self.start_time and time.time() - self.start_time > 3600: self._loop_delay = 120 self.start_time = None # Reset start_time to avoid changing the loop delay again self.printer_devices.update(self.deduplicate_printers(discovered_devices)) # Devices previously discovered but not found this call # When the printer disconnects it can still be listed in cups and print after reconnecting # Wait for 3 consecutive misses before removing it from the list allows us to avoid errors and unnecessary double prints missing = set(self.printer_devices) - set(discovered_devices) for identifier in missing: printer = self.printer_devices[identifier] if printer["disconnect_counter"] >= 2: _logger.warning('Printer %s not found 3 times in a row, disconnecting.', identifier) self.printer_devices.pop(identifier, None) else: printer["disconnect_counter"] += 1 return self.printer_devices.copy() def process_device(self, path, device): identifier = self.get_identifier(path) device.update({ 'identifier': identifier, 'url': path, 'disconnect_counter': 0, }) if device['device-class'] == 'direct': device.update(self.get_usb_info(path)) elif device['device-class'] == 'network': device['ip'] = self.get_ip(path) return identifier, device def get_identifier(self, path): """ Necessary because the path is not always a valid Cups identifier, as it may contain characters typically found in URLs or paths, or it may exceed the length limit. - Removes characters: ':', '/', '.', '\', and space. - Removes the exact strings: "uuid=" and "serial=". - Truncates the string to 127 characters. Example 1: Input: "ipp://printers/printer1:1234/abcd" Output: "ippprintersprinter11234abcd" Example 2: Input: "uuid=1234-5678-90ab-cdef" Output: "1234-5678-90ab-cdef """ return re.sub(r'[:\/\.\\ ]|(uuid=)|(serial=)', '', path)[:127] def get_ip(self, device_path): hostname = urlsplit(device_path).hostname if hostname and hostname.endswith(".local"): zeroconf_name = unquote(hostname.lower()) + "." if zeroconf_name in self.printer_ip_map: return self.printer_ip_map[zeroconf_name] return hostname @staticmethod def get_usb_info(device_path): parsed_url = urlsplit(device_path) parsed_query = parse_qs(parsed_url.query) manufacturer = parsed_url.hostname product = parsed_url.path.removeprefix("/") serial = parsed_query["serial"][0] if "serial" in parsed_query else None if manufacturer and product and serial: return { "usb_manufacturer": manufacturer, "usb_product": product, "usb_serial_number": serial, } else: return {} @staticmethod def deduplicate_printers(discovered_printers): result = [] sorted_printers = sorted(discovered_printers.values(), key=lambda printer: str(printer.get('ip'))) for ip, printers_with_same_ip in groupby(sorted_printers, lambda printer: printer.get('ip')): already_registered_identifier = next(( identifier for identifier, device in iot_devices.items() if device.device_type == 'printer' and ip and ip == device.ip ), None) if already_registered_identifier: result.append({'identifier': already_registered_identifier, 'disconnect_counter': 0}) continue printers_with_same_ip = sorted(printers_with_same_ip, key=lambda printer: printer['identifier']) if ip is None or len(printers_with_same_ip) == 1: result += printers_with_same_ip continue chosen_printer = next(( printer for printer in printers_with_same_ip if 'CMD:' in printer['device-id'] or 'ZPL' in printer['device-id'] ), None) if not chosen_printer: chosen_printer = printers_with_same_ip[0] result.append(chosen_printer) return {printer['identifier']: printer for printer in result} def monitor_for_printers(self): context = pyudev.Context() monitor = pyudev.Monitor.from_netlink(context) monitor.filter_by('usb') def on_device_change(udev_device): if udev_device.action != 'add' or udev_device.driver != 'usblp': return try: device_id = udev_device.attributes.asstring('ieee1284_id') manufacturer = udev_device.parent.attributes.asstring('manufacturer') product = udev_device.parent.attributes.asstring('product') serial = udev_device.parent.attributes.asstring('serial') except KeyError as err: _logger.warning("Could not hotplug printer, field '%s' is not present", err.args[0]) return path = f"usb://{manufacturer}/{product}?serial={serial}" iot_device = { 'device-class': 'direct', 'device-make-and-model': f'{manufacturer} {product}', 'device-id': device_id, } identifier, iot_device = self.process_device(path, iot_device) self.add_device(identifier, iot_device) observer = pyudev.MonitorObserver(monitor, callback=on_device_change) observer.start() def start_zeroconf_listener(self): self.printer_ip_map = {} service_types = [ "_printer._tcp.local.", "_pdl-datastream._tcp.local.", "_ipp._tcp.local.", "_ipps._tcp.local.", ] def on_service_change(zeroconf, service_type, name, state_change): if state_change is not ServiceStateChange.Added: return info = zeroconf.get_service_info(service_type, name) if info and info.addresses: address = info.parsed_addresses(IPVersion.V4Only)[0] self.printer_ip_map[name.lower()] = address zeroconf = Zeroconf(ip_version=IPVersion.V4Only) self.zeroconf_browser = ServiceBrowser(zeroconf, service_types, handlers=[on_service_change]) def set_up_printer_in_cups(self, device): """Configure detected printer in cups: ppd files, name, info, groups, ... :param dict device: printer device to configure in cups (detected but not added) """ fallback_model = device.get('device-make-and-model', "") model = next(( device_id.split(":")[1] for device_id in device.get('device-id', "").split(";") if any(key in device_id for key in ['MDL', 'MODEL']) ), fallback_model) model = re.sub(r"[\(].*?[\)]", "", model).strip() ppdname_argument = next(({"ppdname": ppd} for ppd in self.PPDs if model and model in self.PPDs[ppd]['ppd-product']), {}) try: self.conn.addPrinter(name=device['identifier'], device=device['url'], **ppdname_argument) self.conn.setPrinterInfo(device['identifier'], device['device-make-and-model']) self.conn.enablePrinter(device['identifier']) self.conn.acceptJobs(device['identifier']) self.conn.setPrinterUsersAllowed(device['identifier'], ['all']) self.conn.addPrinterOptionDefault(device['identifier'], "usb-no-reattach", "true") self.conn.addPrinterOptionDefault(device['identifier'], "usb-unidir", "true") except IPPError: _logger.exception("Failed to add printer '%s'", device['identifier']) def start(self): super().start() self.start_zeroconf_listener() self.monitor_for_printers()