# Copyright (c) 2006-2007 by the Protocol Engineering Lab, U of Delaware # All rights reserved. # # Protocol Engineering Lab web page : http://pel.cis.udel.edu/ # # Paul D. Amer # Armando L. Caro Jr. # Janardhan Iyengar # Preethi Natarajan # Nasif Ekiz # # Redistribution and use in source and binary forms, with or without # modification, are permitted provided that the following conditions # are met: # # 1. Redistributions of source code must retain the above copyright # notice, this list of conditions and the following disclaimer. # # 2. Redistributions in binary form must reproduce the above copyright # notice, this list of conditions and the following disclaimer in the # documentation and/or other materials provided with the distribution. # # 3. Neither the name of the University nor of the Laboratory may be used # to endorse or promote products derived from this software without # specific prior written permission. # # THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND # ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE # IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE # ARE DISCLAIMED. IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE # FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL # DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS # OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) # HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT # LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY # OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF # SUCH DAMAGE. # # # # To run all of the tests in this file: ./test-all-sctp # # To run an individual test: # ns test-suite-sctp.tcl sctp-2packetsTimeout # ns test-suite-sctp.tcl sctp-AMR-Exceeded # ns test-suite-sctp.tcl sctp-Rel1-Loss2 # ns test-suite-sctp.tcl sctp-burstAfterFastRtxRecovery # ns test-suite-sctp.tcl sctp-burstAfterFastRtxRecovery-2 # ns test-suite-sctp.tcl sctp-cwndFreeze # ns test-suite-sctp.tcl sctp-cwndFreeze-multistream # ns test-suite-sctp.tcl sctp-hugeRwnd # ns test-suite-sctp.tcl sctp-initRtx # ns test-suite-sctp.tcl sctp-multihome1-2 # ns test-suite-sctp.tcl sctp-multihome2-1 # ns test-suite-sctp.tcl sctp-multihome2-2AMR-Exceeded # ns test-suite-sctp.tcl sctp-multihome2-2Failover # ns test-suite-sctp.tcl sctp-multihome2-2Rtx1 # ns test-suite-sctp.tcl sctp-multihome2-2Rtx3 # ns test-suite-sctp.tcl sctp-multihome2-2Timeout # ns test-suite-sctp.tcl sctp-multihome2-2TimeoutRta0 # ns test-suite-sctp.tcl sctp-multihome2-2TimeoutRta2 # ns test-suite-sctp.tcl sctp-multihome2-R-2 # ns test-suite-sctp.tcl sctp-multihome3-3Timeout # ns test-suite-sctp.tcl sctp-multipleDropsSameWnd-1 # ns test-suite-sctp.tcl sctp-multipleDropsSameWnd-1-delayed # ns test-suite-sctp.tcl sctp-multipleDropsSameWnd-2 # ns test-suite-sctp.tcl sctp-multipleDropsSameWnd-3 # ns test-suite-sctp.tcl sctp-multipleDropsTwoWnds-1-delayed # ns test-suite-sctp.tcl sctp-multipleRtx # ns test-suite-sctp.tcl sctp-multipleRtx-early # ns test-suite-sctp.tcl sctp-newReno # ns test-suite-sctp.tcl sctp-noEarlyHBs # ns test-suite-sctp.tcl sctp-smallRwnd # ns test-suite-sctp.tcl sctp-smallSwnd # ns test-suite-sctp.tcl sctp-zeroRtx # ns test-suite-sctp.tcl sctp-zeroRtx-burstLoss # # ns test-suite-sctp.tcl sctp-hbAfterRto-2packetsTimeout # ns test-suite-sctp.tcl sctp-hbAfterRto-multihome2-2Timeout # # ns test-suite-sctp.tcl sctp-multipleFastRtx-2packetsTimeout # ns test-suite-sctp.tcl sctp-multipleFastRtx-multihome2-2Timeout # # ns test-suite-sctp.tcl sctp-mfrHbAfterRto-Rta2-2FRsTimeout # # ns test-suite-sctp.tcl sctp-timestamp-multihome2-2Rtx3 # ns test-suite-sctp.tcl sctp-timestamp-multihome2-2Timeout # # ns test-suite-sctp.tcl sctp-packet-loss-dest-conf # # ns test-suite-sctp.tcl sctp-cmt-2paths-64K # ns test-suite-sctp.tcl sctp-cmt-2paths-64K-withloss # ns test-suite-sctp.tcl sctp-cmt-3paths-64K # ns test-suite-sctp.tcl sctp-cmt-2paths-1path-fails # ns test-suite-sctp.tcl sctp-cmt-3paths-1path-fails # ns test-suite-sctp.tcl sctp-cmt-packet-loss-dest-conf # ns test-suite-sctp.tcl sctp-cmt-Rtx-ssthresh # ns test-suite-sctp.tcl sctp-cmt-Rtx-cwnd # ns test-suite-sctp.tcl sctp-cmt-Timeout-pmr # ns test-suite-sctp.tcl sctp-cmt-multihome2-2Timeout # ns test-suite-sctp.tcl sctp-cmt-pf-2paths-1path-fails # ns test-suite-sctp.tcl sctp-cmt-pf-3paths-1path-fails # ns test-suite-sctp.tcl sctp-cmt-pf-packet-loss-dest-conf # ns test-suite-sctp.tcl sctp-cmt-pf-Rtx-ssthresh # ns test-suite-sctp.tcl sctp-cmt-pf-Rtx-cwnd # ns test-suite-sctp.tcl sctp-cmt-pf-Timeout-pmr # ns test-suite-sctp.tcl sctp-non-renegable-ack-no-loss # ns test-suite-sctp.tcl sctp-sack-with-loss # ns test-suite-sctp.tcl sctp-non-renegable-ack-with-loss # ns test-suite-sctp.tcl sctp-sack-with-loss-unordered # ns test-suite-sctp.tcl sctp-non-renegable-ack-with-loss-unordered # ns test-suite-sctp.tcl sctp-non-renegable-ack-with-loss-multistream # ns test-suite-sctp.tcl sctp-cmt-2paths-1path-fails-with-non-renegable-acks Class TestSuite # 2 packets get dropped and their fast rtx gets lost too.... forcing them # to timeout. Class Test/sctp-2packetsTimeout -superclass TestSuite # This script tests that the appropriate action is taken when the # Association.Max.Retrans exceeded... abruptly close the association! Class Test/sctp-AMR-Exceeded -superclass TestSuite # tests unreliable stream with k-rtx value of 1 with 2 losses of same chunk. Class Test/sctp-Rel1-Loss2 -superclass TestSuite # This tests the Max.Burst feature added in the SCTP implementors # guide draft v4. This script carefully choose a small receiver window # and drops a specific packet to generate the scenario where the # receiver has a full window and is waiting on the rtx of an earlier # lost chunk. Once the sender fast retransmits the chunk and the # receiver receives it, the entire receiver window is free'd up and # now the sender has plenty of room to send. This WOULD create a # burst, but Max.Burst limits the burst in this scenario. Class Test/sctp-burstAfterFastRtxRecovery -superclass TestSuite # This tests the Max.Burst feature added in the SCTP implementors # guide draft v4. This script carefully choose a small receiver window # and drops a specific packet to generate the scenario where the # receiver has a full window and is waiting on the rtx of an earlier # lost chunk. Once the sender fast retransmits the chunk and the # receiver receives it, the entire receiver window is free'd up and # now the sender has plenty of room to send. This WOULD create a # burst, but Max.Burst limits the burst in this scenario. Class Test/sctp-burstAfterFastRtxRecovery-2 -superclass TestSuite # The SCTP implementor's guide clarifies a point in the congestion # control algorithm which allows PTMU-1 bytes over cwnd in # flight. This script tests that it is done properly and that cwnd # does NOT freeze. Class Test/sctp-cwndFreeze -superclass TestSuite # The SCTP implementor's guide clarifies a point in the congestion control # algorithm which allows PTMU-1 bytes over cwnd in flight. This script # tests that it is done properly (with multistreams) and that cwnd does # NOT freeze. Class Test/sctp-cwndFreeze-multistream -superclass TestSuite # This script tests for proper behavior when using a huge rwnd and mtu # size chunks. Class Test/sctp-hugeRwnd -superclass TestSuite # tests that it recovers from losing an INIT chunk Class Test/sctp-initRtx -superclass TestSuite # Demonstrates multihoming. One endpoint is single homed while the # other is multihomed. Shows that the 2 can be combined. The sender is # multihomed. Class Test/sctp-multihome1-2 -superclass TestSuite # Demonstrates multihoming. One endpoint is single homed while the other is # multihomed. Shows that the 2 can be combined. The receiver is multihomed. Class Test/sctp-multihome2-1 -superclass TestSuite # This script tests that the appropriate action is taken when the association # is multihomed and Association.Max.Retrans exceeded... abruptly close the # association! Class Test/sctp-multihome2-2AMR-Exceeded -superclass TestSuite # Demonstrates a failover with multihoming. Two endpoints with 2 # interfaces with direct connections between each pair. When primary # becomes inactive, a failover to the secondary path occurs and # data transfer continues on this path. Class Test/sctp-multihome2-2Failover -superclass TestSuite # Demonstrates retransmissions with multihoming. Two endpoints with 2 # interfaces with direct connections between each pair. A packet gets # dropped and later gets retransmitted on an alternate path. Class Test/sctp-multihome2-2Rtx1 -superclass TestSuite # Demonstrates retransmissions with multihoming. Two endpoints with 2 # interfaces with direct connections between each pair. 3 packets get # dropped and later get retransmitted on an alternate path. Class Test/sctp-multihome2-2Rtx3 -superclass TestSuite # Demonstrates retransmissions with multihoming. Two endpoints with 2 # interfaces with direct connections between each pair. A packet gets # dropped and fast rtx'd on the alternate path. The retransmit gets # lost and times out, causing yet another retransmission. Class Test/sctp-multihome2-2Timeout -superclass TestSuite # Demonstrates experimental retransmission policies (Rta0 = retransmit on # the same path) with multihoming. Two endpoints with 2 interfaces with # direct connections between each pair. A packet gets dropped and fast # rtx'd on the same path. The retransmit gets lost and times out, causing # yet another retransmission on the same path. Class Test/sctp-multihome2-2TimeoutRta0 -superclass TestSuite # Demonstrates experimental retransmission policies (Rta1 = fast rtx on # the same path and timeout rtx on the alternate path) with # multihoming. Two endpoints with 2 interfaces with direct connections # between each pair. A packet gets dropped and fast rtx'd on the same # path. The retransmit gets lost and times out, causing yet another # retransmission on the alternate path. Class Test/sctp-multihome2-2TimeoutRta2 -superclass TestSuite # Demonstrates multihoming. Two endpoints with 2 interfaces each all # connected via a router. In the middle of the association, a change # primary is done. Class Test/sctp-multihome2-R-2 -superclass TestSuite # Demonstrates retransmissions with multihoming. Two endpoints with 3 # interfaces with direct connections between each pair. A packet gets dropped # and fast rtx'd on the alternate path. The retransmit gets lost and times out, # causing a retransmission on the the third althernate path. Class Test/sctp-multihome3-3Timeout -superclass TestSuite # One burst loss and one individual loss in same window (without delayed sacks). Class Test/sctp-multipleDropsSameWnd-1 -superclass TestSuite # One burst loss and one individual loss in same window (with delayed sacks). Class Test/sctp-multipleDropsSameWnd-1-delayed -superclass TestSuite # Burst loss in same window. Class Test/sctp-multipleDropsSameWnd-2 -superclass TestSuite # Two independent burst losses in same window. Class Test/sctp-multipleDropsSameWnd-3 -superclass TestSuite # One continuous burst loss. Class Test/sctp-multipleDropsTwoWnds-1-delayed -superclass TestSuite # This test drops TSN 15 (ns pkt 17) and the Fast Rtx of the same # (ns pkt 36). According to the proposed Section 7.2.4.5, Fast Rtx # happens only once for any TSN. This graph illustrates this point - # if Fast Rtx is enabled after the timeout rtx of the TSN, it can be # clearly seen that there WILL be a false Fast Rtx for the TSN. Class Test/sctp-multipleRtx -superclass TestSuite # This test drops TSN 3 (ns pkt 5) and the Fast Rtx of the same (ns # pkt 12). According to the proposed Section 7.2.4.5, Fast Rtx # happens only once for any TSN. This graph illustrates this point - # if Fast Rtx is enabled after the timeout rtx of the TSN, it can be # clearly seen that there WILL be a false Fast Rtx for the TSN. (Note: # this script is basically the same as multipleRtx.tcl, except here we # are testing the same condition when it happens early in the # connection.) Class Test/sctp-multipleRtx-early -superclass TestSuite # Test NewReno changes (fast recovery & HTNA algorithm) in impguide-08 Class Test/sctp-newReno -superclass TestSuite # test that HEARTBEATs don't start until the association is established Class Test/sctp-noEarlyHBs -superclass TestSuite # This script tests for proper behavior when using a small rwnd and # medium size chunks. Class Test/sctp-smallRwnd -superclass TestSuite # This script tests for proper behavior when using a small send buffer # and medium size chunks. Class Test/sctp-smallSwnd -superclass TestSuite # tests unreliable stream with k-rtx value of 0 with one loss. Class Test/sctp-zeroRtx -superclass TestSuite # test unreliable stream with k-rtx value of 0 with a burst loss. Class Test/sctp-zeroRtx-burstLoss -superclass TestSuite # Test HbAfterRto extension. 2 packets get dropped and their fast rtx gets # lost too.... forcing them to timeout. Class Test/sctp-hbAfterRto-2packetsTimeout -superclass TestSuite # Test HbAfterRto extension. Demonstrates retransmissions with # multihoming. Two endpoints with 2 interfaces with direct connections # between each pair. A packet gets dropped and fast rtx'd on the alternate # path. The retransmit gets lost and times out, causing a retransmission # on the original path (primary). Class Test/sctp-hbAfterRto-multihome2-2Timeout -superclass TestSuite # Test MultipleFastRtx extension. 2 packets get dropped and their fast rtx gets # lost too.... NORMALLY forcing them to timeout, but with this extension # they are fast rtx'd again. Class Test/sctp-multipleFastRtx-2packetsTimeout -superclass TestSuite # Test MultipleFastRtx extension. Demonstrates retransmissions with # multihoming. Two endpoints with 2 interfaces with direct connections # between each pair. A packet gets dropped and fast rtx'd on the alternate # path. The retransmit gets lost and fast rtx'd again (instead of # timeout!) on the original path (primary). Class Test/sctp-multipleFastRtx-multihome2-2Timeout -superclass TestSuite # Test MfrHbAfterRto extension with RTA=2. Two endpoints with 2 interfaces # with direct connections between each pair. A packet gets dropped and # fast rtx'd on the same path. The rtx gets lost, and the packet is fast rtx'd # again. Then all packets on primary are lost, so a timeout occurs and the same # packet gets retransmitted on alternate path. Class Test/sctp-mfrHbAfterRto-Rta2-2FRsTimeout -superclass TestSuite # Test Timestamp extension. Demonstrates retransmissions with timestamps # and multihoming. Two endpoints with 2 interfaces with direct connections # between each pair. 3 packets get dropped and later get retransmitted on # an alternate path. Class Test/sctp-timestamp-multihome2-2Rtx3 -superclass TestSuite # Test Timestamp extension. Demonstrates retransmissions with # multihoming. Two endpoints with 2 interfaces with direct connections # between each pair. A packet gets dropped and fast rtx'd on the alternate # path. The retransmit gets lost and times out, causing a retransmission # on the original path (primary). Class Test/sctp-timestamp-multihome2-2Timeout -superclass TestSuite # Demonstrates SCTP destination confirmation. # There are two endpoints with 3 interfaces each. Two of the heartbeats used # for destination confirmation are lost, which delays the start of data # transfer. Data transfer does not start until all the destinations are # confirmed. Class Test/sctp-packet-loss-dest-conf -superclass TestSuite # Demonstrates Concurrent Multipath Transfer (CMT) using multihoming. # Two endpoints with 2 interfaces with direct connections between each pair. Class Test/sctp-cmt-2paths-64K -superclass TestSuite # Demonstrates Concurrent Multipath Transfer (CMT) using multihoming. # Two endpoints with 2 interfaces with direct connections between each pair. # Loss introduced on Path0, and delay of Path0 different from Path1. Class Test/sctp-cmt-2paths-64K-withloss -superclass TestSuite # Demonstrates Concurrent Multipath Transfer (CMT) using multihoming. # Two endpoints with 3 interfaces with direct connections between each pair. Class Test/sctp-cmt-3paths-64K -superclass TestSuite # Demonstrates Concurrent Multipath Transfer (CMT) using multihoming. # There are two endpoints with 2 interfaces each. One of the independent paths # between end points becomes inactive(goes down) during the transfer. The # transfer is completed using the other path. Class Test/sctp-cmt-2paths-1path-fails -superclass TestSuite # Demonstrates Concurrent Multipath Transfer (CMT) using multihoming. # There are two endpoints with 3 interfaces each. One of the independent paths # between end points becomes inactive(goes down) during the transfer. The # transfer is completed using the other paths. Class Test/sctp-cmt-3paths-1path-fails -superclass TestSuite # Demonstrates Concurrent Multipath Transfer (CMT) destination confirmation. # There are two endpoints with 2 interfaces. Two of the heartbeats used for # destination confirmation are lost, which delays the start of data transfer. # Data transfer does not start until all the destinations are confirmed. Class Test/sctp-cmt-packet-loss-dest-conf -superclass TestSuite # Demonstrates Concurrent Multipath Transfer (CMT) using multihoming and # RTX_SSTHRESH retransmission policy. There are two endpoints with 2 # interfaces each. Six consecutive data packets from the first interface are # dropped to cause a Timeout. Retransmissions are sent to the destination with # the highest ssthresh value. Class Test/sctp-cmt-Rtx-ssthresh -superclass TestSuite # Demonstrates Concurrent Multipath Transfer (CMT) using multihoming and # RTX_CWND retransmission policy. There are two endpoints with 2 interfaces # each. A random packet is lost to force fast rtx. of the packet. The rtx. is # sent to the destination with the highest cwnd value. Class Test/sctp-cmt-Rtx-cwnd -superclass TestSuite # Demonstrates Concurrent Multipath Transfer (CMT) using multihoming. # There are two endpoints with 2 interfaces each. A number of packets are lost # from one of the destinations to get PMR+1 consecutive timeouts. These # timeouts change the status of the destination to INACTIVE. The data transfer # continues to the remaining active destination. When INACTIVE destination # becomes ACTIVE, data packets can be send to the all the destinations again. Class Test/sctp-cmt-Timeout-pmr -superclass TestSuite # Demonstrates a Timeout with multihoming for Concurrent Multipath # Transfer (CMT). There are two endpoints with 2 interfaces with direct # connections between each pair. A packet gets dropped and fast rtx. # The rtx. gets lost and times out, causing yet another retransmission. Class Test/sctp-cmt-multihome2-2Timeout -superclass TestSuite # Demonstrates Concurrent Multipath Transfer with Potentially Failed (CMT-PF) # using multihoming. There are two endpoints with 2 interfaces each. One of # the independent paths between hosts becomes inactive(goes down) during the # transfer. On the first Timeout on the failed path, data is no longer # transferred along the failed destination. The transfer is completed using # the other path. Class Test/sctp-cmt-pf-2paths-1path-fails -superclass TestSuite # Demonstrates Concurrent Multipath Transfer with Potentially Failed (CMT-PF) # using multihoming. There are two endpoints with 3 interfaces each. One of # the independent paths between hosts becomes inactive(goes down) during the # transfer. On the first Timeout on the failed destination, data is no longer # transferred along the failed path. The transfer is completed using the other # paths. Class Test/sctp-cmt-pf-3paths-1path-fails -superclass TestSuite # Demonstrates Concurrent Multipath Transfer with Potentially Failed (CMT-PF) # destination confirmation. There are two endpoints with 2 interfaces each. # Two of the heartbeats used for destination confirmation are lost, which # delays the start of data transfer. Data transfer does not start until all # the destinations are confirmed. Class Test/sctp-cmt-pf-packet-loss-dest-conf -superclass TestSuite # Demonstrates Concurrent Multipath Transfer with Potentially Failed (CMT-PF) # using multihoming and RTX_SSTHRESH retransmission policy. # There are two endpoints with 2 interfaces each. A random packet is lost # and its fast rtx. is sent to the destination with the highest ssthresh value. Class Test/sctp-cmt-pf-Rtx-ssthresh -superclass TestSuite # Demonstrates Concurrent Multipath Transfer with Potentially Failed (CMT-PF) # using multihoming and RTX_CWND retransmission policy. # There are two endpoints with 2 interfaces each. A random packet is lost # and its fast rtx. is sent to the destination with the highest cwnd value. Class Test/sctp-cmt-pf-Rtx-cwnd -superclass TestSuite # Demonstrates Concurrent Multipath Transfer with Potentially Failed (CMT-PF) # using multihoming. There are two endpoints with 2 interfaces. A number of # packets are lost from one of the destinations to get PMR+1 consecutive # timeouts. These timeouts change the status of the destination to INACTIVE. # The data transfer continues to the remaining active destination. When # INACTIVE destination becomes ACTIVE, data packets can be send to the all # the destinations again. Class Test/sctp-cmt-pf-Timeout-pmr -superclass TestSuite # This script tests for proper behavior when using Non-Renegable acknowlegments # with a small send buffer and medium size chunks. The data receiver sends # Non-Renegable acks (indicated with --------N in trace files) back to # the data sender. The test is similar to the sctp-smallRwnd except using # Non-Renegable acknowlegments. Note that the size of a Non-Renegable ack # is 4 bytes more than a SACK which causes a slight difference in the # trace files. Class Test/sctp-non-renegable-ack-no-loss -superclass TestSuite # This script shows the use of Selective Acks (SACK) with # some loss. The data sender has a small send buffer while the data # receiver has relatively large receiver buffer. When the data loss occurs # for data packets (TSNs: 19 and 20) and their retransmissions, the data # sender is blocked until the lost TSNs are recovered. The script uses # a multi-streamed data sender. Even though TSNs 21-24 are delivered # to the upper layer at the data receiver, send buffer of the data sender # cannot release those TSNs until the cumack is advanced beyond those TSNs. # This behavior blocks the data sender to put new data on the network. Class Test/sctp-sack-with-loss -superclass TestSuite # This script shows the use of Non-Renegable Selective Acks (NR-SACK) # with some loss. The test setup is same as above test where SACK is # used. With the use of NR-SACKs, the data sender empties the send # buffer for TSNs 21-24 when corresponding NR-SACKs are received and # sends new TSNs on the network. Note that the data sender is not blocked. Class Test/sctp-non-renegable-ack-with-loss -superclass TestSuite # This script shows a loss scenario with Selective Acks (SACK) # in use. The TSN 32, and two consecutive retransmissions are lost. # The send buffer of data sender is blocked and no new data can # be send before the loss recovery. All the TSNs beyond the TSN 32, # are successfully received at data receiver and delivered to the # upper layer. The application used an unordered stream for the # data transfer. Class Test/sctp-sack-with-loss-unordered -superclass TestSuite # This script shows a loss scenario with Non-Renegable Selective Acks # (NR-SACK) in use. The TSN 32, and two consecutive retransmissions are lost. # The data receiver delivers all received TSNs to the upper layer and mark # delivered TSNs as Non-Renegable. The data sender deletes TSNs from # its send buffer which are marked as Non-Renegable. So, data sender reads # new data from application and sends them. Note that data sender sends # more data during the loss recovery period when NR-SACKs are used. Class Test/sctp-non-renegable-ack-with-loss-unordered -superclass TestSuite # This script shows a loss scenario with Non-Renegable Selective Acks # (NR-SACK) in use. The TSN 32, and two consecutive retransmissions are lost. # The application is multistreamed using 2 streams (0 and 1). # The data receiver delivers all received TSNs from stream 0 to upper layer # and mark delivered TSNs as Non-Renegable. The data sender deletes TSNs from # its send buffer which are marked as Non-Renegable. Since the data loss is from # stream 1 those TSNs are marked as Renegable and are kept in data senders # buffer until cumack advances. In this test case, less TSNs are send in the # loss recovery period since TSNs from stream 1 filled the send buffer and # blocks the data sender. Class Test/sctp-non-renegable-ack-with-loss-multistream -superclass TestSuite # Demonstrates Concurrent Multipath Transfer (CMT) using multihoming and # Non-Renegable Selective Acks (NR-SACK). # There are two endpoints with 2 interfaces each. One of the independent paths # between end points becomes inactive(goes down) during the transfer. The # transfer is completed using the other path. The application in this test # is unordered as opposed to same test above with SACKs # (sctp-cmt-2paths-1path-fails). When NR-SACKs are used along the unordered # application, the data sender is not blocked and data transfer continues # without interrupt on the active path. The same can be achieved for the multi- # streamed applications if TSNs from the same stream are always send to the # same path. Class Test/sctp-cmt-2paths-1path-fails-with-non-renegable-acks -superclass TestSuite proc usage {} { global argv0 puts stderr "usage: ns $argv0 " exit 1 } TestSuite instproc init {} { Trace set show_sctphdr_ 1 $self instvar ns numnodes_ set ns [new Simulator] set allchan [open temp.rands w] $ns trace-all $allchan } TestSuite instproc finish {} { $self instvar ns global quiet PERL $ns flush-trace if {$quiet == 0} { puts "Graphing..." set XGRAPH "../../../bin/xgraph" set RAW2XG_SCTP "../../bin/raw2xg-sctp" set WRAP 100 exec $PERL $RAW2XG_SCTP -A -f -q -s 0.01 -m $WRAP -n 0 temp.rands \ > temp.rands.points exec $XGRAPH -bb -tk -nl -m -x time -y packets temp.rands.points & } exit 0 } Test/sctp-2packetsTimeout instproc init {} { $self instvar ns ftp0 global quiet set testName 2packetsTimeout $self next set n0 [$ns node] set n1 [$ns node] $ns duplex-link $n0 $n1 .5Mb 200ms DropTail $ns duplex-link-op $n0 $n1 orient right set err [new ErrorModel/List] $err droplist {15 16 32 33} $ns lossmodel $err $n0 $n1 set sctp0 [new Agent/SCTP] $ns attach-agent $n0 $sctp0 $sctp0 set mtu_ 1500 $sctp0 set dataChunkSize_ 1468 $sctp0 set numOutStreams_ 1 if {$quiet == 0} { $sctp0 set debugMask_ -1 $sctp0 set debugFileIndex_ 0 } set sctp1 [new Agent/SCTP] $ns attach-agent $n1 $sctp1 $sctp1 set mtu_ 1500 $sctp1 set initialRwnd_ 131072 $sctp1 set useDelayedSacks_ 0 if {$quiet == 0} { $sctp1 set debugMask_ -1 $sctp1 set debugFileIndex_ 1 } $ns connect $sctp0 $sctp1 set ftp0 [new Application/FTP] $ftp0 attach-agent $sctp0 } Test/sctp-2packetsTimeout instproc run {} { $self instvar ns ftp0 $ns at 0.5 "$ftp0 start" $ns at 10.0 "$self finish" $ns run } Test/sctp-AMR-Exceeded instproc init {} { $self instvar ns testName ftp0 global quiet set testName AMR-Exceeded $self next set n0 [$ns node] set n1 [$ns node] $ns duplex-link $n0 $n1 .5Mb 200ms DropTail $ns duplex-link-op $n0 $n1 orient right set err [new ErrorModel/List] $err droplist {15 16 17 18 19 20 21 22 23 32 33 34 35 36 37 38 39 40 41 42 43 44 45} $ns lossmodel $err $n0 $n1 set sctp0 [new Agent/SCTP] $ns attach-agent $n0 $sctp0 $sctp0 set mtu_ 1500 $sctp0 set dataChunkSize_ 1468 $sctp0 set numOutStreams_ 1 $sctp0 set associationMaxRetrans_ 5 if {$quiet == 0} { $sctp0 set debugMask_ -1 $sctp0 set debugFileIndex_ 0 set trace_ch [open trace.sctp w] $sctp0 set trace_all_ 1 $sctp0 trace cwnd_ $sctp0 trace rto_ $sctp0 trace errorCount_ $sctp0 attach $trace_ch } set sctp1 [new Agent/SCTP] $ns attach-agent $n1 $sctp1 $sctp1 set mtu_ 1500 $sctp1 set initialRwnd_ 131072 $sctp1 set useDelayedSacks_ 0 if {$quiet == 0} { $sctp1 set debugMask_ -1 $sctp1 set debugFileIndex_ 1 } $ns connect $sctp0 $sctp1 set ftp0 [new Application/FTP] $ftp0 attach-agent $sctp0 } Test/sctp-AMR-Exceeded instproc run {} { $self instvar ns ftp0 $ns at 0.5 "$ftp0 start" $ns at 90.0 "$self finish" $ns run } Test/sctp-Rel1-Loss2 instproc init {} { $self instvar ns testName ftp0 global quiet set testName Rel1-Loss2 $self next set n0 [$ns node] set n1 [$ns node] $ns duplex-link $n0 $n1 .5Mb 200ms DropTail $ns duplex-link-op $n0 $n1 orient right set err [new ErrorModel/List] $err droplist {16 29} $ns lossmodel $err $n0 $n1 set sctp0 [new Agent/SCTP] $ns attach-agent $n0 $sctp0 $sctp0 set mtu_ 1500 $sctp0 set dataChunkSize_ 1468 $sctp0 set numOutStreams_ 1 $sctp0 set numUnrelStreams_ 1 $sctp0 set reliability_ 1 if {$quiet == 0} { $sctp0 set debugMask_ -1 $sctp0 set debugFileIndex_ 0 set trace_ch [open trace.sctp w] $sctp0 set trace_all_ 1 $sctp0 trace cwnd_ $sctp0 trace rto_ $sctp0 trace errorCount_ $sctp0 attach $trace_ch } set sctp1 [new Agent/SCTP] $ns attach-agent $n1 $sctp1 $sctp1 set mtu_ 1500 $sctp1 set initialRwnd_ 131072 $sctp1 set useDelayedSacks_ 1 if {$quiet == 0} { $sctp1 set debugMask_ -1 $sctp1 set debugFileIndex_ 1 } $ns connect $sctp0 $sctp1 set ftp0 [new Application/FTP] $ftp0 attach-agent $sctp0 } Test/sctp-Rel1-Loss2 instproc run {} { $self instvar ns ftp0 $ns at 0.5 "$ftp0 start" $ns at 10.0 "$self finish" $ns run } Test/sctp-burstAfterFastRtxRecovery instproc init {} { $self instvar ns testName ftp0 global quiet set testName burstAfterFastRtxRecovery $self next set n0 [$ns node] set n1 [$ns node] $ns duplex-link $n0 $n1 5Mb 50ms DropTail $ns duplex-link-op $n0 $n1 orient right set err [new ErrorModel/List] $err droplist {113} $ns lossmodel $err $n0 $n1 set sctp0 [new Agent/SCTP] $ns attach-agent $n0 $sctp0 $sctp0 set mtu_ 1500 $sctp0 set dataChunkSize_ 1468 $sctp0 set numOutStreams_ 1 $sctp0 set useMaxBurst_ 1 if {$quiet == 0} { $sctp0 set debugMask_ -1 $sctp0 set debugFileIndex_ 0 set trace_ch [open trace.sctp w] $sctp0 set trace_all_ 1 $sctp0 trace cwnd_ $sctp0 trace rto_ $sctp0 trace errorCount_ $sctp0 attach $trace_ch } set sctp1 [new Agent/SCTP] $ns attach-agent $n1 $sctp1 $sctp1 set mtu_ 1500 $sctp1 set initialRwnd_ 23488 $sctp1 set useDelayedSacks_ 1 if {$quiet == 0} { $sctp1 set debugMask_ -1 $sctp1 set debugFileIndex_ 1 } $ns connect $sctp0 $sctp1 set ftp0 [new Application/FTP] $ftp0 attach-agent $sctp0 } Test/sctp-burstAfterFastRtxRecovery instproc run {} { $self instvar ns ftp0 $ns at 0.5 "$ftp0 start" $ns at 5.0 "$self finish" $ns run } Test/sctp-burstAfterFastRtxRecovery-2 instproc init {} { $self instvar ns testName ftp0 global quiet set testName burstAfterFastRtxRecovery-2 $self next set n0 [$ns node] set n1 [$ns node] $ns duplex-link $n0 $n1 .5Mb 200ms DropTail $ns duplex-link-op $n0 $n1 orient right set err [new ErrorModel/List] $err droplist {32} $ns lossmodel $err $n0 $n1 set sctp0 [new Agent/SCTP] $ns attach-agent $n0 $sctp0 $sctp0 set mtu_ 1500 $sctp0 set dataChunkSize_ 1468 $sctp0 set numOutStreams_ 1 $sctp0 set useMaxBurst_ 1 if {$quiet == 0} { $sctp0 set debugMask_ -1 $sctp0 set debugFileIndex_ 0 set trace_ch [open trace.sctp w] $sctp0 set trace_all_ 1 $sctp0 trace cwnd_ $sctp0 trace rto_ $sctp0 trace errorCount_ $sctp0 attach $trace_ch } set sctp1 [new Agent/SCTP] $ns attach-agent $n1 $sctp1 $sctp1 set mtu_ 1500 $sctp1 set initialRwnd_ 23488 $sctp1 set useDelayedSacks_ 1 if {$quiet == 0} { $sctp1 set debugMask_ -1 $sctp1 set debugFileIndex_ 1 } $ns connect $sctp0 $sctp1 set ftp0 [new Application/FTP] $ftp0 attach-agent $sctp0 } Test/sctp-burstAfterFastRtxRecovery-2 instproc run {} { $self instvar ns ftp0 $ns at 0.5 "$ftp0 start" $ns at 6.0 "$self finish" $ns run } Test/sctp-cwndFreeze instproc init {} { $self instvar ns testName ftp0 global quiet set testName cwndFreeze $self next set n0 [$ns node] set n1 [$ns node] $ns duplex-link $n0 $n1 .5Mb 200ms DropTail $ns duplex-link-op $n0 $n1 orient right set err [new ErrorModel/List] $err droplist {11} $ns lossmodel $err $n0 $n1 set sctp0 [new Agent/SCTP] $ns attach-agent $n0 $sctp0 $sctp0 set mtu_ 1500 $sctp0 set dataChunkSize_ 1468 $sctp0 set numOutStreams_ 1 if {$quiet == 0} { $sctp0 set debugMask_ -1 $sctp0 set debugFileIndex_ 0 set trace_ch [open trace.sctp w] $sctp0 set trace_all_ 1 $sctp0 trace cwnd_ $sctp0 trace rto_ $sctp0 trace errorCount_ $sctp0 attach $trace_ch } set sctp1 [new Agent/SCTP] $ns attach-agent $n1 $sctp1 $sctp1 set mtu_ 1500 $sctp1 set initialRwnd_ 131072 $sctp1 set useDelayedSacks_ 0 if {$quiet == 0} { $sctp1 set debugMask_ -1 $sctp1 set debugFileIndex_ 1 } $ns connect $sctp0 $sctp1 set ftp0 [new Application/FTP] $ftp0 attach-agent $sctp0 } Test/sctp-cwndFreeze instproc run {} { $self instvar ns ftp0 $ns at 0.5 "$ftp0 start" $ns at 5.0 "$self finish" $ns run } Test/sctp-cwndFreeze-multistream instproc init {} { $self instvar ns testName ftp0 global quiet set testName cwndFreeze-multistream $self next set n0 [$ns node] set n1 [$ns node] $ns duplex-link $n0 $n1 .5Mb 200ms DropTail $ns duplex-link-op $n0 $n1 orient right set err [new ErrorModel/List] $err droplist {16} $ns lossmodel $err $n0 $n1 set sctp0 [new Agent/SCTP] $ns attach-agent $n0 $sctp0 $sctp0 set mtu_ 1500 $sctp0 set dataChunkSize_ 1468 $sctp0 set numOutStreams_ 5 if {$quiet == 0} { $sctp0 set debugMask_ -1 $sctp0 set debugFileIndex_ 0 set trace_ch [open trace.sctp w] $sctp0 set trace_all_ 1 $sctp0 trace cwnd_ $sctp0 trace rto_ $sctp0 trace errorCount_ $sctp0 attach $trace_ch } set sctp1 [new Agent/SCTP] $ns attach-agent $n1 $sctp1 $sctp1 set mtu_ 1500 $sctp1 set initialRwnd_ 131072 $sctp1 set useDelayedSacks_ 1 if {$quiet == 0} { $sctp1 set debugMask_ -1 $sctp1 set debugFileIndex_ 1 } $ns connect $sctp0 $sctp1 set ftp0 [new Application/FTP] $ftp0 attach-agent $sctp0 } Test/sctp-cwndFreeze-multistream instproc run {} { $self instvar ns ftp0 $ns at 0.5 "$ftp0 start" $ns at 10.0 "$self finish" $ns run } Test/sctp-hugeRwnd instproc init {} { $self instvar ns testName ftp0 global quiet set testName hugeRwnd $self next set n0 [$ns node] set n1 [$ns node] $ns duplex-link $n0 $n1 1500Mb 300ms DropTail $ns duplex-link-op $n0 $n1 orient right $ns queue-limit $n0 $n1 10000 set err [new ErrorModel/List] set sctp0 [new Agent/SCTP] $ns attach-agent $n0 $sctp0 $sctp0 set mtu_ 1500 $sctp0 set dataChunkSize_ 1468 $sctp0 set numOutStreams_ 1 if {$quiet == 0} { $sctp0 set debugMask_ -1 $sctp0 set debugFileIndex_ 0 set trace_ch [open trace.sctp w] $sctp0 set trace_all_ 1 $sctp0 trace cwnd_ $sctp0 trace rto_ $sctp0 trace errorCount_ $sctp0 attach $trace_ch } set sctp1 [new Agent/SCTP] $ns attach-agent $n1 $sctp1 $sctp1 set mtu_ 1500 $sctp1 set initialRwnd_ 1048576 $sctp1 set useDelayedSacks_ 0 if {$quiet == 0} { $sctp1 set debugMask_ -1 $sctp1 set debugFileIndex_ 1 } $ns connect $sctp0 $sctp1 set ftp0 [new Application/FTP] $ftp0 attach-agent $sctp0 } Test/sctp-hugeRwnd instproc run {} { $self instvar ns ftp0 $ns at 0.5 "$ftp0 start" $ns at 10.0 "$self finish" $ns run } Test/sctp-initRtx instproc init {} { $self instvar ns testName ftp0 global quiet set testName initRtx $self next set n0 [$ns node] set n1 [$ns node] $ns duplex-link $n0 $n1 .5Mb 200ms DropTail $ns duplex-link-op $n0 $n1 orient right set err [new ErrorModel/List] $err droplist {0} $ns lossmodel $err $n0 $n1 set sctp0 [new Agent/SCTP] $ns attach-agent $n0 $sctp0 $sctp0 set mtu_ 1500 $sctp0 set dataChunkSize_ 1468 $sctp0 set numOutStreams_ 1 if {$quiet == 0} { $sctp0 set debugMask_ -1 $sctp0 set debugFileIndex_ 0 set trace_ch [open trace.sctp w] $sctp0 set trace_all_ 1 $sctp0 trace cwnd_ $sctp0 trace rto_ $sctp0 trace errorCount_ $sctp0 attach $trace_ch } set sctp1 [new Agent/SCTP] $ns attach-agent $n1 $sctp1 $sctp1 set mtu_ 1500 $sctp1 set initialRwnd_ 131072 $sctp1 set useDelayedSacks_ 1 if {$quiet == 0} { $sctp1 set debugMask_ -1 $sctp1 set debugFileIndex_ 1 } $ns connect $sctp0 $sctp1 set ftp0 [new Application/FTP] $ftp0 attach-agent $sctp0 } Test/sctp-initRtx instproc run {} { $self instvar ns ftp0 $ns at 0.5 "$ftp0 start" $ns at 10.0 "$self finish" $ns run } Test/sctp-multihome1-2 instproc init {} { $self instvar ns testName host0_if1 sctp0 ftp0 global quiet set testName multihome1-2 $self next set host0_core [$ns node] set host0_if0 [$ns node] set host0_if1 [$ns node] $host0_core color Red $host0_if0 color Red $host0_if1 color Red $ns multihome-add-interface $host0_core $host0_if0 $ns multihome-add-interface $host0_core $host0_if1 set host1 [$ns node] $host1 color Blue set router [$ns node] $ns duplex-link $host0_if0 $router .5Mb 200ms DropTail $ns duplex-link $host0_if1 $router .5Mb 200ms DropTail $ns duplex-link $host1 $router .5Mb 200ms DropTail set sctp0 [new Agent/SCTP] $ns multihome-attach-agent $host0_core $sctp0 $sctp0 set mtu_ 1500 $sctp0 set dataChunkSize_ 1468 $sctp0 set numOutStreams_ 1 if {$quiet == 0} { $sctp0 set debugMask_ -1 $sctp0 set debugFileIndex_ 0 set trace_ch [open trace.sctp w] $sctp0 set trace_all_ 1 $sctp0 trace cwnd_ $sctp0 trace rto_ $sctp0 trace errorCount_ $sctp0 attach $trace_ch } set sctp1 [new Agent/SCTP] $ns attach-agent $host1 $sctp1 $sctp1 set mtu_ 1500 $sctp1 set initialRwnd_ 131072 $sctp1 set useDelayedSacks_ 1 if {$quiet == 0} { $sctp1 set debugMask_ -1 $sctp1 set debugFileIndex_ 1 } $ns connect $sctp0 $sctp1 set ftp0 [new Application/FTP] $ftp0 attach-agent $sctp0 } Test/sctp-multihome1-2 instproc run {} { $self instvar ns host0_if1 sctp0 ftp0 $ns at 6.0 "$sctp0 force-source $host0_if1" $ns at 0.5 "$ftp0 start" $ns at 8.0 "$self finish" $ns run } Test/sctp-multihome2-1 instproc init {} { $self instvar ns testName host0_if1 sctp1 ftp1 global quiet set testName multihome2-1 $self next set host0_core [$ns node] set host0_if0 [$ns node] set host0_if1 [$ns node] $host0_core color Red $host0_if0 color Red $host0_if1 color Red $ns multihome-add-interface $host0_core $host0_if0 $ns multihome-add-interface $host0_core $host0_if1 set host1 [$ns node] $host1 color Blue set router [$ns node] $ns duplex-link $host0_if0 $router .5Mb 200ms DropTail $ns duplex-link $host0_if1 $router .5Mb 200ms DropTail $ns duplex-link $host1 $router .5Mb 200ms DropTail set sctp0 [new Agent/SCTP] $ns multihome-attach-agent $host0_core $sctp0 $sctp0 set mtu_ 1500 $sctp0 set dataChunkSize_ 1468 $sctp0 set numOutStreams_ 1 if {$quiet == 0} { $sctp0 set debugMask_ -1 $sctp0 set debugFileIndex_ 0 set trace_ch [open trace.sctp w] $sctp0 set trace_all_ 1 $sctp0 trace cwnd_ $sctp0 trace rto_ $sctp0 trace errorCount_ $sctp0 attach $trace_ch } set sctp1 [new Agent/SCTP] $ns attach-agent $host1 $sctp1 $sctp1 set mtu_ 1500 $sctp1 set dataChunkSize_ 512 $sctp1 set initialRwnd_ 131072 $sctp1 set useDelayedSacks_ 1 if {$quiet == 0} { $sctp1 set debugMask_ -1 $sctp1 set debugFileIndex_ 1 } $ns connect $sctp0 $sctp1 $sctp1 set-primary-destination $host0_if0 set ftp1 [new Application/FTP] $ftp1 attach-agent $sctp1 } Test/sctp-multihome2-1 instproc run {} { $self instvar ns host0_if1 sctp1 ftp1 $ns at 6.0 "$sctp1 set-primary-destination $host0_if1" $ns at 0.5 "$ftp1 start" $ns at 8.0 "$self finish" $ns run } Test/sctp-multihome2-2AMR-Exceeded instproc init {} { $self instvar ns testName ftp0 global quiet set testName multihome2-2AMR-Exceeded $self next set host0_core [$ns node] set host0_if0 [$ns node] set host0_if1 [$ns node] $host0_core color Red $host0_if0 color Red $host0_if1 color Red $ns multihome-add-interface $host0_core $host0_if0 $ns multihome-add-interface $host0_core $host0_if1 set host1_core [$ns node] set host1_if0 [$ns node] set host1_if1 [$ns node] $host1_core color Blue $host1_if0 color Blue $host1_if1 color Blue $ns multihome-add-interface $host1_core $host1_if0 $ns multihome-add-interface $host1_core $host1_if1 $ns duplex-link $host0_if0 $host1_if0 .5Mb 200ms DropTail $ns duplex-link $host0_if1 $host1_if1 .5Mb 200ms DropTail set err0 [new ErrorModel/List] $err0 droplist {16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38} $ns lossmodel $err0 $host0_if0 $host1_if0 set err1 [new ErrorModel/List] $err1 droplist {1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17} $ns lossmodel $err1 $host0_if1 $host1_if1 set sctp0 [new Agent/SCTP] $ns multihome-attach-agent $host0_core $sctp0 $sctp0 set mtu_ 1500 $sctp0 set dataChunkSize_ 1468 $sctp0 set numOutStreams_ 1 if {$quiet == 0} { $sctp0 set debugMask_ -1 $sctp0 set debugFileIndex_ 0 set trace_ch [open trace.sctp w] $sctp0 set trace_all_ 1 $sctp0 trace cwnd_ $sctp0 trace rto_ $sctp0 trace errorCount_ $sctp0 attach $trace_ch } set sctp1 [new Agent/SCTP] $ns multihome-attach-agent $host1_core $sctp1 $sctp1 set mtu_ 1500 $sctp1 set initialRwnd_ 131072 $sctp1 set useDelayedSacks_ 1 if {$quiet == 0} { $sctp1 set debugMask_ -1 $sctp1 set debugFileIndex_ 1 } $ns connect $sctp0 $sctp1 set ftp0 [new Application/FTP] $ftp0 attach-agent $sctp0 $sctp0 set-primary-destination $host1_if0 } Test/sctp-multihome2-2AMR-Exceeded instproc run {} { $self instvar ns ftp0 $ns at 0.5 "$ftp0 start" $ns at 180.0 "$self finish" $ns run } Test/sctp-multihome2-2Failover instproc init {} { $self instvar ns testName ftp0 global quiet set testName multihome2-2Failover $self next set host0_core [$ns node] set host0_if0 [$ns node] set host0_if1 [$ns node] $host0_core color Red $host0_if0 color Red $host0_if1 color Red $ns multihome-add-interface $host0_core $host0_if0 $ns multihome-add-interface $host0_core $host0_if1 set host1_core [$ns node] set host1_if0 [$ns node] set host1_if1 [$ns node] $host1_core color Blue $host1_if0 color Blue $host1_if1 color Blue $ns multihome-add-interface $host1_core $host1_if0 $ns multihome-add-interface $host1_core $host1_if1 $ns duplex-link $host0_if0 $host1_if0 .5Mb 200ms DropTail $ns duplex-link $host0_if1 $host1_if1 .5Mb 200ms DropTail set err0 [new ErrorModel/List] $err0 droplist {16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 32 33} $ns lossmodel $err0 $host0_if0 $host1_if0 set sctp0 [new Agent/SCTP] $ns multihome-attach-agent $host0_core $sctp0 $sctp0 set mtu_ 1500 $sctp0 set dataChunkSize_ 1468 $sctp0 set numOutStreams_ 1 if {$quiet == 0} { $sctp0 set debugMask_ -1 $sctp0 set debugFileIndex_ 0 set trace_ch [open trace.sctp w] $sctp0 set trace_all_ 1 $sctp0 trace cwnd_ $sctp0 trace rto_ $sctp0 trace errorCount_ $sctp0 attach $trace_ch } set sctp1 [new Agent/SCTP] $ns multihome-attach-agent $host1_core $sctp1 $sctp1 set mtu_ 1500 $sctp1 set initialRwnd_ 131072 $sctp1 set useDelayedSacks_ 1 if {$quiet == 0} { $sctp1 set debugMask_ -1 $sctp1 set debugFileIndex_ 1 } $ns connect $sctp0 $sctp1 $sctp0 set-primary-destination $host1_if0 set ftp0 [new Application/FTP] $ftp0 attach-agent $sctp0 } Test/sctp-multihome2-2Failover instproc run {} { $self instvar ns ftp0 $ns at 0.5 "$ftp0 start" $ns at 180.0 "$self finish" $ns run } Test/sctp-multihome2-2Rtx1 instproc init {} { $self instvar ns testName ftp0 global quiet set testName multihome2-2Rtx1 $self next set host0_core [$ns node] set host0_if0 [$ns node] set host0_if1 [$ns node] $host0_core color Red $host0_if0 color Red $host0_if1 color Red $ns multihome-add-interface $host0_core $host0_if0 $ns multihome-add-interface $host0_core $host0_if1 set host1_core [$ns node] set host1_if0 [$ns node] set host1_if1 [$ns node] $host1_core color Blue $host1_if0 color Blue $host1_if1 color Blue $ns multihome-add-interface $host1_core $host1_if0 $ns multihome-add-interface $host1_core $host1_if1 $ns duplex-link $host0_if0 $host1_if0 .5Mb 200ms DropTail $ns duplex-link $host0_if1 $host1_if1 .5Mb 200ms DropTail set err [new ErrorModel/List] $err droplist {16} $ns lossmodel $err $host0_if0 $host1_if0 set sctp0 [new Agent/SCTP] $ns multihome-attach-agent $host0_core $sctp0 $sctp0 set mtu_ 1500 $sctp0 set dataChunkSize_ 1468 $sctp0 set numOutStreams_ 1 if {$quiet == 0} { $sctp0 set debugMask_ -1 $sctp0 set debugFileIndex_ 0 set trace_ch [open trace.sctp w] $sctp0 set trace_all_ 1 $sctp0 trace cwnd_ $sctp0 trace rto_ $sctp0 trace errorCount_ $sctp0 attach $trace_ch } set sctp1 [new Agent/SCTP] $ns multihome-attach-agent $host1_core $sctp1 $sctp1 set mtu_ 1500 $sctp1 set initialRwnd_ 131072 $sctp1 set useDelayedSacks_ 1 if {$quiet == 0} { $sctp1 set debugMask_ -1 $sctp1 set debugFileIndex_ 1 } $ns connect $sctp0 $sctp1 set ftp0 [new Application/FTP] $ftp0 attach-agent $sctp0 $sctp0 set-primary-destination $host1_if0 } Test/sctp-multihome2-2Rtx1 instproc run {} { $self instvar ns ftp0 $ns at 0.5 "$ftp0 start" $ns at 10.0 "$self finish" $ns run } Test/sctp-multihome2-2Rtx3 instproc init {} { $self instvar ns testName ftp0 global quiet set testName multihome2-2Rtx3 $self next set host0_core [$ns node] set host0_if0 [$ns node] set host0_if1 [$ns node] $host0_core color Red $host0_if0 color Red $host0_if1 color Red $ns multihome-add-interface $host0_core $host0_if0 $ns multihome-add-interface $host0_core $host0_if1 set host1_core [$ns node] set host1_if0 [$ns node] set host1_if1 [$ns node] $host1_core color Blue $host1_if0 color Blue $host1_if1 color Blue $ns multihome-add-interface $host1_core $host1_if0 $ns multihome-add-interface $host1_core $host1_if1 $ns duplex-link $host0_if0 $host1_if0 .5Mb 200ms DropTail $ns duplex-link $host0_if1 $host1_if1 .5Mb 200ms DropTail set err [new ErrorModel/List] $err droplist {16 17 18} $ns lossmodel $err $host0_if0 $host1_if0 set sctp0 [new Agent/SCTP] $ns multihome-attach-agent $host0_core $sctp0 $sctp0 set mtu_ 1500 $sctp0 set dataChunkSize_ 1468 $sctp0 set numOutStreams_ 1 if {$quiet == 0} { $sctp0 set debugMask_ -1 $sctp0 set debugFileIndex_ 0 set trace_ch [open trace.sctp w] $sctp0 set trace_all_ 1 $sctp0 trace cwnd_ $sctp0 trace rto_ $sctp0 trace errorCount_ $sctp0 attach $trace_ch } set sctp1 [new Agent/SCTP] $ns multihome-attach-agent $host1_core $sctp1 $sctp1 set mtu_ 1500 $sctp1 set initialRwnd_ 131072 $sctp1 set useDelayedSacks_ 1 if {$quiet == 0} { $sctp1 set debugMask_ -1 $sctp1 set debugFileIndex_ 1 } $ns connect $sctp0 $sctp1 set ftp0 [new Application/FTP] $ftp0 attach-agent $sctp0 $sctp0 set-primary-destination $host1_if0 } Test/sctp-multihome2-2Rtx3 instproc run {} { $self instvar ns ftp0 $ns at 0.5 "$ftp0 start" $ns at 10.0 "$self finish" $ns run } Test/sctp-multihome2-2Timeout instproc init {} { $self instvar ns testName ftp0 global quiet set testName multihome2-2Timeout $self next set host0_core [$ns node] set host0_if0 [$ns node] set host0_if1 [$ns node] $host0_core color Red $host0_if0 color Red $host0_if1 color Red $ns multihome-add-interface $host0_core $host0_if0 $ns multihome-add-interface $host0_core $host0_if1 set host1_core [$ns node] set host1_if0 [$ns node] set host1_if1 [$ns node] $host1_core color Blue $host1_if0 color Blue $host1_if1 color Blue $ns multihome-add-interface $host1_core $host1_if0 $ns multihome-add-interface $host1_core $host1_if1 $ns duplex-link $host0_if0 $host1_if0 .5Mb 200ms DropTail $ns duplex-link $host0_if1 $host1_if1 .5Mb 200ms DropTail set err0 [new ErrorModel/List] $err0 droplist {16} $ns lossmodel $err0 $host0_if0 $host1_if0 set err1 [new ErrorModel/List] $err1 droplist {1} $ns lossmodel $err1 $host0_if1 $host1_if1 set sctp0 [new Agent/SCTP] $ns multihome-attach-agent $host0_core $sctp0 $sctp0 set mtu_ 1500 $sctp0 set dataChunkSize_ 1468 $sctp0 set numOutStreams_ 1 if {$quiet == 0} { $sctp0 set debugMask_ -1 $sctp0 set debugFileIndex_ 0 set trace_ch [open trace.sctp w] $sctp0 set trace_all_ 1 $sctp0 trace cwnd_ $sctp0 trace rto_ $sctp0 trace errorCount_ $sctp0 attach $trace_ch } set sctp1 [new Agent/SCTP] $ns multihome-attach-agent $host1_core $sctp1 $sctp1 set mtu_ 1500 $sctp1 set initialRwnd_ 131072 $sctp1 set useDelayedSacks_ 1 if {$quiet == 0} { $sctp1 set debugMask_ -1 $sctp1 set debugFileIndex_ 1 } $ns connect $sctp0 $sctp1 $sctp0 set-primary-destination $host1_if0 set ftp0 [new Application/FTP] $ftp0 attach-agent $sctp0 } Test/sctp-multihome2-2Timeout instproc run {} { $self instvar ns ftp0 $ns at 0.5 "$ftp0 start" $ns at 12.0 "$self finish" $ns run } Test/sctp-multihome2-2TimeoutRta0 instproc init {} { $self instvar ns testName ftp0 global quiet set testName multihome2-2TimeoutRta0 $self next set host0_core [$ns node] set host0_if0 [$ns node] set host0_if1 [$ns node] $host0_core color Red $host0_if0 color Red $host0_if1 color Red $ns multihome-add-interface $host0_core $host0_if0 $ns multihome-add-interface $host0_core $host0_if1 set host1_core [$ns node] set host1_if0 [$ns node] set host1_if1 [$ns node] $host1_core color Blue $host1_if0 color Blue $host1_if1 color Blue $ns multihome-add-interface $host1_core $host1_if0 $ns multihome-add-interface $host1_core $host1_if1 $ns duplex-link $host0_if0 $host1_if0 .5Mb 200ms DropTail $ns duplex-link $host0_if1 $host1_if1 .5Mb 200ms DropTail set err0 [new ErrorModel/List] $err0 droplist {16 29} $ns lossmodel $err0 $host0_if0 $host1_if0 set sctp0 [new Agent/SCTP] $ns multihome-attach-agent $host0_core $sctp0 $sctp0 set mtu_ 1500 $sctp0 set dataChunkSize_ 1468 $sctp0 set numOutStreams_ 1 $sctp0 set rtxToAlt_ 0 if {$quiet == 0} { $sctp0 set debugMask_ -1 $sctp0 set debugFileIndex_ 0 set trace_ch [open trace.sctp w] $sctp0 set trace_all_ 1 $sctp0 trace cwnd_ $sctp0 trace rto_ $sctp0 trace errorCount_ $sctp0 attach $trace_ch } set sctp1 [new Agent/SCTP] $ns multihome-attach-agent $host1_core $sctp1 $sctp1 set mtu_ 1500 $sctp1 set initialRwnd_ 131072 $sctp1 set useDelayedSacks_ 1 if {$quiet == 0} { $sctp1 set debugMask_ -1 $sctp1 set debugFileIndex_ 1 } $ns connect $sctp0 $sctp1 $sctp0 set-primary-destination $host1_if0 set ftp0 [new Application/FTP] $ftp0 attach-agent $sctp0 } Test/sctp-multihome2-2TimeoutRta0 instproc run {} { $self instvar ns ftp0 $ns at 0.5 "$ftp0 start" $ns at 12.0 "$self finish" $ns run } Test/sctp-multihome2-2TimeoutRta2 instproc init {} { $self instvar ns testName ftp0 global quiet set testName multihome2-2TimeoutRta2 $self next set host0_core [$ns node] set host0_if0 [$ns node] set host0_if1 [$ns node] $host0_core color Red $host0_if0 color Red $host0_if1 color Red $ns multihome-add-interface $host0_core $host0_if0 $ns multihome-add-interface $host0_core $host0_if1 set host1_core [$ns node] set host1_if0 [$ns node] set host1_if1 [$ns node] $host1_core color Blue $host1_if0 color Blue $host1_if1 color Blue $ns multihome-add-interface $host1_core $host1_if0 $ns multihome-add-interface $host1_core $host1_if1 $ns duplex-link $host0_if0 $host1_if0 .5Mb 200ms DropTail $ns duplex-link $host0_if1 $host1_if1 .5Mb 200ms DropTail set err0 [new ErrorModel/List] $err0 droplist {16 29} $ns lossmodel $err0 $host0_if0 $host1_if0 set sctp0 [new Agent/SCTP] $ns multihome-attach-agent $host0_core $sctp0 $sctp0 set mtu_ 1500 $sctp0 set dataChunkSize_ 1468 $sctp0 set numOutStreams_ 1 $sctp0 set rtxToAlt_ 2 if {$quiet == 0} { $sctp0 set debugMask_ -1 $sctp0 set debugFileIndex_ 0 set trace_ch [open trace.sctp w] $sctp0 set trace_all_ 1 $sctp0 trace cwnd_ $sctp0 trace rto_ $sctp0 trace errorCount_ $sctp0 attach $trace_ch } set sctp1 [new Agent/SCTP] $ns multihome-attach-agent $host1_core $sctp1 $sctp1 set mtu_ 1500 $sctp1 set initialRwnd_ 131072 $sctp1 set useDelayedSacks_ 1 if {$quiet == 0} { $sctp1 set debugMask_ -1 $sctp1 set debugFileIndex_ 1 } $ns connect $sctp0 $sctp1 $sctp0 set-primary-destination $host1_if0 set ftp0 [new Application/FTP] $ftp0 attach-agent $sctp0 } Test/sctp-multihome2-2TimeoutRta2 instproc run {} { $self instvar ns ftp0 $ns at 0.5 "$ftp0 start" $ns at 12.0 "$self finish" $ns run } Test/sctp-multihome2-R-2 instproc init {} { $self instvar ns testName host1_if1 sctp0 ftp0 global quiet set testName multihome2-R-2 $self next set host0_core [$ns node] set host0_if0 [$ns node] set host0_if1 [$ns node] $host0_core color Red $host0_if0 color Red $host0_if1 color Red $ns multihome-add-interface $host0_core $host0_if0 $ns multihome-add-interface $host0_core $host0_if1 set host1_core [$ns node] set host1_if0 [$ns node] set host1_if1 [$ns node] $host1_core color Blue $host1_if0 color Blue $host1_if1 color Blue $ns multihome-add-interface $host1_core $host1_if0 $ns multihome-add-interface $host1_core $host1_if1 set router [$ns node] $ns duplex-link $host0_if0 $router .5Mb 200ms DropTail $ns duplex-link $host0_if1 $router .5Mb 200ms DropTail $ns duplex-link $host1_if0 $router .5Mb 200ms DropTail $ns duplex-link $host1_if1 $router .5Mb 200ms DropTail set sctp0 [new Agent/SCTP] $ns multihome-attach-agent $host0_core $sctp0 $sctp0 set mtu_ 1500 $sctp0 set dataChunkSize_ 1468 $sctp0 set numOutStreams_ 1 if {$quiet == 0} { $sctp0 set debugMask_ -1 $sctp0 set debugFileIndex_ 0 set trace_ch [open trace.sctp w] $sctp0 set trace_all_ 1 $sctp0 trace cwnd_ $sctp0 trace rto_ $sctp0 trace errorCount_ $sctp0 attach $trace_ch } set sctp1 [new Agent/SCTP] $ns multihome-attach-agent $host1_core $sctp1 $sctp1 set mtu_ 1500 $sctp1 set initialRwnd_ 131072 $sctp1 set useDelayedSacks_ 1 if {$quiet == 0} { $sctp1 set debugMask_ -1 $sctp1 set debugFileIndex_ 1 } $ns connect $sctp0 $sctp1 set ftp0 [new Application/FTP] $ftp0 attach-agent $sctp0 $sctp0 set-primary-destination $host1_if0 } Test/sctp-multihome2-R-2 instproc run {} { $self instvar ns host1_if1 sctp0 ftp0 $ns at 7.5 "$sctp0 set-primary-destination $host1_if1" $ns at 0.5 "$ftp0 start" $ns at 12.0 "$self finish" $ns run } Test/sctp-multihome3-3Timeout instproc init {} { $self instvar ns testName ftp0 global quiet set testName multihome3-3Timeout $self next set host0_core [$ns node] set host0_if0 [$ns node] set host0_if1 [$ns node] set host0_if2 [$ns node] $host0_core color Red $host0_if0 color Red $host0_if1 color Red $host0_if2 color Red $ns multihome-add-interface $host0_core $host0_if0 $ns multihome-add-interface $host0_core $host0_if1 $ns multihome-add-interface $host0_core $host0_if2 set host1_core [$ns node] set host1_if0 [$ns node] set host1_if1 [$ns node] set host1_if2 [$ns node] $host1_core color Blue $host1_if0 color Blue $host1_if1 color Blue $host1_if2 color Blue $ns multihome-add-interface $host1_core $host1_if0 $ns multihome-add-interface $host1_core $host1_if1 $ns multihome-add-interface $host1_core $host1_if2 $ns duplex-link $host0_if0 $host1_if0 .5Mb 200ms DropTail $ns duplex-link $host0_if1 $host1_if1 .5Mb 200ms DropTail $ns duplex-link $host0_if2 $host1_if2 .5Mb 200ms DropTail set err0 [new ErrorModel/List] $err0 droplist {16} $ns lossmodel $err0 $host0_if0 $host1_if0 set err1 [new ErrorModel/List] $err1 droplist {1} $ns lossmodel $err1 $host0_if1 $host1_if1 set sctp0 [new Agent/SCTP] $ns multihome-attach-agent $host0_core $sctp0 $sctp0 set mtu_ 1500 $sctp0 set dataChunkSize_ 1468 $sctp0 set numOutStreams_ 1 if {$quiet == 0} { $sctp0 set debugMask_ -1 $sctp0 set debugFileIndex_ 0 set trace_ch [open trace.sctp w] $sctp0 set trace_all_ 1 $sctp0 trace cwnd_ $sctp0 trace rto_ $sctp0 trace errorCount_ $sctp0 attach $trace_ch } set sctp1 [new Agent/SCTP] $ns multihome-attach-agent $host1_core $sctp1 $sctp1 set mtu_ 1500 $sctp1 set initialRwnd_ 131072 $sctp1 set useDelayedSacks_ 1 if {$quiet == 0} { $sctp1 set debugMask_ -1 $sctp1 set debugFileIndex_ 1 } $ns connect $sctp0 $sctp1 $sctp0 set-primary-destination $host1_if0 set ftp0 [new Application/FTP] $ftp0 attach-agent $sctp0 } Test/sctp-multihome3-3Timeout instproc run {} { $self instvar ns ftp0 $ns at 0.5 "$ftp0 start" $ns at 10.0 "$self finish" $ns run } Test/sctp-multipleDropsSameWnd-1 instproc init {} { $self instvar ns testName ftp0 global quiet set testName multipleDropsSameWnd-1 $self next set n0 [$ns node] set n1 [$ns node] $ns duplex-link $n0 $n1 .5Mb 200ms DropTail $ns duplex-link-op $n0 $n1 orient right set err [new ErrorModel/List] $err droplist {20 21 23} $ns lossmodel $err $n0 $n1 set sctp0 [new Agent/SCTP] $ns attach-agent $n0 $sctp0 $sctp0 set mtu_ 1500 $sctp0 set dataChunkSize_ 1468 $sctp0 set numOutStreams_ 1 if {$quiet == 0} { $sctp0 set debugMask_ -1 $sctp0 set debugFileIndex_ 0 set trace_ch [open trace.sctp w] $sctp0 set trace_all_ 1 $sctp0 trace cwnd_ $sctp0 trace rto_ $sctp0 trace errorCount_ $sctp0 attach $trace_ch } set sctp1 [new Agent/SCTP] $ns attach-agent $n1 $sctp1 $sctp1 set mtu_ 1500 $sctp1 set initialRwnd_ 131072 $sctp1 set useDelayedSacks_ 0 if {$quiet == 0} { $sctp1 set debugMask_ -1 $sctp1 set debugFileIndex_ 1 } $ns connect $sctp0 $sctp1 set ftp0 [new Application/FTP] $ftp0 attach-agent $sctp0 } Test/sctp-multipleDropsSameWnd-1 instproc run {} { $self instvar ns ftp0 $ns at 0.5 "$ftp0 start" $ns at 7.0 "$self finish" $ns run } Test/sctp-multipleDropsSameWnd-1-delayed instproc init {} { $self instvar ns testName ftp0 global quiet set testName multipleDropsSameWnd-1-delayed $self next set n0 [$ns node] set n1 [$ns node] $ns duplex-link $n0 $n1 .5Mb 200ms DropTail $ns duplex-link-op $n0 $n1 orient right set err [new ErrorModel/List] $err droplist {13 14 16} $ns lossmodel $err $n0 $n1 set sctp0 [new Agent/SCTP] $ns attach-agent $n0 $sctp0 $sctp0 set mtu_ 1500 $sctp0 set dataChunkSize_ 1468 $sctp0 set numOutStreams_ 1 if {$quiet == 0} { $sctp0 set debugMask_ -1 $sctp0 set debugFileIndex_ 0 set trace_ch [open trace.sctp w] $sctp0 set trace_all_ 1 $sctp0 trace cwnd_ $sctp0 trace rto_ $sctp0 trace errorCount_ $sctp0 attach $trace_ch } set sctp1 [new Agent/SCTP] $ns attach-agent $n1 $sctp1 $sctp1 set mtu_ 1500 $sctp1 set initialRwnd_ 131072 $sctp1 set useDelayedSacks_ 1 if {$quiet == 0} { $sctp1 set debugMask_ -1 $sctp1 set debugFileIndex_ 1 } $ns connect $sctp0 $sctp1 set ftp0 [new Application/FTP] $ftp0 attach-agent $sctp0 } Test/sctp-multipleDropsSameWnd-1-delayed instproc run {} { $self instvar ns ftp0 $ns at 0.5 "$ftp0 start" $ns at 7.0 "$self finish" $ns run } Test/sctp-multipleDropsSameWnd-2 instproc init {} { $self instvar ns testName ftp0 global quiet set testName multipleDropsSameWnd-2 $self next set n0 [$ns node] set n1 [$ns node] $ns duplex-link $n0 $n1 .5Mb 200ms DropTail $ns duplex-link-op $n0 $n1 orient right set err [new ErrorModel/List] $err droplist {20 21 22 23} $ns lossmodel $err $n0 $n1 set sctp0 [new Agent/SCTP] $ns attach-agent $n0 $sctp0 $sctp0 set mtu_ 1500 $sctp0 set dataChunkSize_ 1468 $sctp0 set numOutStreams_ 1 if {$quiet == 0} { $sctp0 set debugMask_ -1 $sctp0 set debugFileIndex_ 0 set trace_ch [open trace.sctp w] $sctp0 set trace_all_ 1 $sctp0 trace cwnd_ $sctp0 trace rto_ $sctp0 trace errorCount_ $sctp0 attach $trace_ch } set sctp1 [new Agent/SCTP] $ns attach-agent $n1 $sctp1 $sctp1 set mtu_ 1500 $sctp1 set initialRwnd_ 131072 $sctp1 set useDelayedSacks_ 0 if {$quiet == 0} { $sctp1 set debugMask_ -1 $sctp1 set debugFileIndex_ 1 } $ns connect $sctp0 $sctp1 set ftp0 [new Application/FTP] $ftp0 attach-agent $sctp0 } Test/sctp-multipleDropsSameWnd-2 instproc run {} { $self instvar ns ftp0 $ns at 0.5 "$ftp0 start" $ns at 7.0 "$self finish" $ns run } Test/sctp-multipleDropsSameWnd-3 instproc init {} { $self instvar ns testName ftp0 global quiet set testName multipleDropsSameWnd-3 $self next set n0 [$ns node] set n1 [$ns node] $ns duplex-link $n0 $n1 .5Mb 200ms DropTail $ns duplex-link-op $n0 $n1 orient right set err [new ErrorModel/List] $err droplist {19 20 22 23} $ns lossmodel $err $n0 $n1 set sctp0 [new Agent/SCTP] $ns attach-agent $n0 $sctp0 $sctp0 set mtu_ 1500 $sctp0 set dataChunkSize_ 1468 $sctp0 set numOutStreams_ 1 if {$quiet == 0} { $sctp0 set debugMask_ -1 $sctp0 set debugFileIndex_ 0 set trace_ch [open trace.sctp w] $sctp0 set trace_all_ 1 $sctp0 trace cwnd_ $sctp0 trace rto_ $sctp0 trace errorCount_ $sctp0 attach $trace_ch } set sctp1 [new Agent/SCTP] $ns attach-agent $n1 $sctp1 $sctp1 set mtu_ 1500 $sctp1 set initialRwnd_ 131072 $sctp1 set useDelayedSacks_ 0 if {$quiet == 0} { $sctp1 set debugMask_ -1 $sctp1 set debugFileIndex_ 1 } $ns connect $sctp0 $sctp1 set ftp0 [new Application/FTP] $ftp0 attach-agent $sctp0 } Test/sctp-multipleDropsSameWnd-3 instproc run {} { $self instvar ns ftp0 $ns at 0.5 "$ftp0 start" $ns at 7.0 "$self finish" $ns run } Test/sctp-multipleDropsTwoWnds-1-delayed instproc init {} { $self instvar ns testName ftp0 global quiet set testName multipleDropsTwoWnds-1-delayed $self next set n0 [$ns node] set n1 [$ns node] $ns duplex-link $n0 $n1 .5Mb 200ms DropTail $ns duplex-link-op $n0 $n1 orient right set err [new ErrorModel/List] $err droplist {15 16 17 18} $ns lossmodel $err $n0 $n1 set sctp0 [new Agent/SCTP] $ns attach-agent $n0 $sctp0 $sctp0 set mtu_ 1500 $sctp0 set dataChunkSize_ 1468 $sctp0 set numOutStreams_ 1 if {$quiet == 0} { $sctp0 set debugMask_ -1 $sctp0 set debugFileIndex_ 0 set trace_ch [open trace.sctp w] $sctp0 set trace_all_ 1 $sctp0 trace cwnd_ $sctp0 trace rto_ $sctp0 trace errorCount_ $sctp0 attach $trace_ch } set sctp1 [new Agent/SCTP] $ns attach-agent $n1 $sctp1 $sctp1 set mtu_ 1500 $sctp1 set initialRwnd_ 131072 $sctp1 set useDelayedSacks_ 1 if {$quiet == 0} { $sctp1 set debugMask_ -1 $sctp1 set debugFileIndex_ 1 } $ns connect $sctp0 $sctp1 set ftp0 [new Application/FTP] $ftp0 attach-agent $sctp0 } Test/sctp-multipleDropsTwoWnds-1-delayed instproc run {} { $self instvar ns ftp0 $ns at 0.5 "$ftp0 start" $ns at 10.0 "$self finish" $ns run } Test/sctp-multipleRtx instproc init {} { $self instvar ns testName ftp0 global quiet set testName multipleRtx $self next set n0 [$ns node] set n1 [$ns node] $ns duplex-link $n0 $n1 .5Mb 300ms DropTail $ns duplex-link-op $n0 $n1 orient right $ns queue-limit $n0 $n1 10000 set err [new ErrorModel/List] $err droplist {17 36} $ns lossmodel $err $n0 $n1 set sctp0 [new Agent/SCTP] $ns attach-agent $n0 $sctp0 $sctp0 set mtu_ 1500 $sctp0 set dataChunkSize_ 1468 $sctp0 set numOutStreams_ 1 if {$quiet == 0} { $sctp0 set debugMask_ -1 $sctp0 set debugFileIndex_ 0 set trace_ch [open trace.sctp w] $sctp0 set trace_all_ 1 $sctp0 trace cwnd_ $sctp0 trace rto_ $sctp0 trace errorCount_ $sctp0 attach $trace_ch } set sctp1 [new Agent/SCTP] $ns attach-agent $n1 $sctp1 $sctp1 set mtu_ 1500 $sctp1 set initialRwnd_ 131072 $sctp1 set useDelayedSacks_ 0 if {$quiet == 0} { $sctp1 set debugMask_ -1 $sctp1 set debugFileIndex_ 1 } $ns connect $sctp0 $sctp1 set ftp0 [new Application/FTP] $ftp0 attach-agent $sctp0 } Test/sctp-multipleRtx instproc run {} { $self instvar ns ftp0 $ns at 0.5 "$ftp0 start" $ns at 10.0 "$self finish" $ns run } Test/sctp-multipleRtx-early instproc init {} { $self instvar ns testName ftp0 global quiet set testName multipleRtx-early $self next set n0 [$ns node] set n1 [$ns node] $ns duplex-link $n0 $n1 .5Mb 300ms DropTail $ns duplex-link-op $n0 $n1 orient right $ns queue-limit $n0 $n1 10000 set err [new ErrorModel/List] $err droplist {5 12} $ns lossmodel $err $n0 $n1 set sctp0 [new Agent/SCTP] $ns attach-agent $n0 $sctp0 $sctp0 set mtu_ 1500 $sctp0 set dataChunkSize_ 1468 $sctp0 set numOutStreams_ 1 if {$quiet == 0} { $sctp0 set debugMask_ -1 $sctp0 set debugFileIndex_ 0 set trace_ch [open trace.sctp w] $sctp0 set trace_all_ 1 $sctp0 trace cwnd_ $sctp0 trace rto_ $sctp0 trace errorCount_ $sctp0 attach $trace_ch } set sctp1 [new Agent/SCTP] $ns attach-agent $n1 $sctp1 $sctp1 set mtu_ 1500 $sctp1 set initialRwnd_ 131072 $sctp1 set useDelayedSacks_ 0 if {$quiet == 0} { $sctp1 set debugMask_ -1 $sctp1 set debugFileIndex_ 1 } $ns connect $sctp0 $sctp1 set ftp0 [new Application/FTP] $ftp0 attach-agent $sctp0 } Test/sctp-multipleRtx-early instproc run {} { $self instvar ns ftp0 $ns at 0.5 "$ftp0 start" $ns at 10.0 "$self finish" $ns run } Test/sctp-newReno instproc init {} { $self instvar ns testName ftp0 global quiet set testName newReno $self next set n0 [$ns node] set n1 [$ns node] $ns duplex-link $n0 $n1 .5Mb 200ms DropTail $ns duplex-link-op $n0 $n1 orient right set err [new ErrorModel/List] $err droplist {17 29 31} $ns lossmodel $err $n0 $n1 set sctp0 [new Agent/SCTP] $ns attach-agent $n0 $sctp0 $sctp0 set mtu_ 1500 $sctp0 set dataChunkSize_ 1468 $sctp0 set numOutStreams_ 1 $sctp0 set initialCwnd_ 1 if {$quiet == 0} { $sctp0 set debugMask_ -1 $sctp0 set debugFileIndex_ 0 set trace_ch [open trace.sctp w] $sctp0 set trace_all_ 1 $sctp0 trace cwnd_ $sctp0 trace rto_ $sctp0 trace errorCount_ $sctp0 attach $trace_ch } set sctp1 [new Agent/SCTP] $ns attach-agent $n1 $sctp1 $sctp1 set mtu_ 1500 $sctp1 set initialRwnd_ 131072 $sctp1 set useDelayedSacks_ 0 if {$quiet == 0} { $sctp1 set debugMask_ -1 $sctp1 set debugFileIndex_ 1 } $ns connect $sctp0 $sctp1 set ftp0 [new Application/FTP] $ftp0 attach-agent $sctp0 } Test/sctp-newReno instproc run {} { $self instvar ns ftp0 $ns at 0.5 "$ftp0 start" $ns at 7.0 "$ftp0 stop" $ns at 10.0 "$self finish" $ns run } Test/sctp-noEarlyHBs instproc init {} { $self instvar ns testName ftp0 global quiet set testName noEarlyHBs $self next set n0 [$ns node] set n1 [$ns node] $ns duplex-link $n0 $n1 .5Mb 200ms DropTail $ns duplex-link-op $n0 $n1 orient right set sctp0 [new Agent/SCTP] $ns attach-agent $n0 $sctp0 $sctp0 set mtu_ 1500 $sctp0 set dataChunkSize_ 1468 $sctp0 set numOutStreams_ 1 if {$quiet == 0} { $sctp0 set debugMask_ -1 $sctp0 set debugFileIndex_ 0 set trace_ch [open trace.sctp w] $sctp0 set trace_all_ 1 $sctp0 trace cwnd_ $sctp0 trace rto_ $sctp0 trace errorCount_ $sctp0 attach $trace_ch } set sctp1 [new Agent/SCTP] $ns attach-agent $n1 $sctp1 $sctp1 set mtu_ 1500 $sctp1 set initialRwnd_ 131072 $sctp1 set useDelayedSacks_ 0 if {$quiet == 0} { $sctp1 set debugMask_ -1 $sctp1 set debugFileIndex_ 1 } $ns connect $sctp0 $sctp1 set ftp0 [new Application/FTP] $ftp0 attach-agent $sctp0 } Test/sctp-noEarlyHBs instproc run {} { $self instvar ns ftp0 $ns at 50.0 "$ftp0 start" $ns at 55.0 "$self finish" $ns run } Test/sctp-smallRwnd instproc init {} { $self instvar ns testName ftp0 global quiet set testName smallRwnd $self next set n0 [$ns node] set n1 [$ns node] $ns duplex-link $n0 $n1 .5Mb 300ms DropTail $ns duplex-link-op $n0 $n1 orient right $ns queue-limit $n0 $n1 10000 set err [new ErrorModel/List] set sctp0 [new Agent/SCTP] $ns attach-agent $n0 $sctp0 $sctp0 set mtu_ 1500 $sctp0 set dataChunkSize_ 724 $sctp0 set numOutStreams_ 1 if {$quiet == 0} { $sctp0 set debugMask_ -1 $sctp0 set debugFileIndex_ 0 set trace_ch [open trace.sctp w] $sctp0 set trace_all_ 1 $sctp0 trace cwnd_ $sctp0 trace rto_ $sctp0 trace errorCount_ $sctp0 attach $trace_ch } set sctp1 [new Agent/SCTP] $ns attach-agent $n1 $sctp1 $sctp1 set mtu_ 1500 $sctp1 set initialRwnd_ 4096 $sctp1 set useDelayedSacks_ 0 if {$quiet == 0} { $sctp1 set debugMask_ -1 $sctp1 set debugFileIndex_ 1 } $ns connect $sctp0 $sctp1 set ftp0 [new Application/FTP] $ftp0 attach-agent $sctp0 } Test/sctp-smallRwnd instproc run {} { $self instvar ns ftp0 $ns at 0.5 "$ftp0 start" $ns at 10.0 "$self finish" $ns run } Test/sctp-smallSwnd instproc init {} { $self instvar ns testName ftp0 global quiet set testName smallSwnd $self next set n0 [$ns node] set n1 [$ns node] $ns duplex-link $n0 $n1 .5Mb 300ms DropTail $ns duplex-link-op $n0 $n1 orient right $ns queue-limit $n0 $n1 10000 set err [new ErrorModel/List] set sctp0 [new Agent/SCTP] $ns attach-agent $n0 $sctp0 $sctp0 set mtu_ 1500 $sctp0 set dataChunkSize_ 724 $sctp0 set numOutStreams_ 1 $sctp0 set initialSwnd_ 8192 if {$quiet == 0} { $sctp0 set debugMask_ -1 $sctp0 set debugFileIndex_ 0 set trace_ch [open trace.sctp w] $sctp0 set trace_all_ 1 $sctp0 trace cwnd_ $sctp0 trace rto_ $sctp0 trace errorCount_ $sctp0 attach $trace_ch } set sctp1 [new Agent/SCTP] $ns attach-agent $n1 $sctp1 $sctp1 set mtu_ 1500 $sctp1 set initialRwnd_ 65536 $sctp1 set useDelayedSacks_ 0 if {$quiet == 0} { $sctp1 set debugMask_ -1 $sctp1 set debugFileIndex_ 1 } $ns connect $sctp0 $sctp1 set ftp0 [new Application/FTP] $ftp0 attach-agent $sctp0 } Test/sctp-smallSwnd instproc run {} { $self instvar ns ftp0 $ns at 0.5 "$ftp0 start" $ns at 10.0 "$self finish" $ns run } Test/sctp-zeroRtx instproc init {} { $self instvar ns testName ftp0 global quiet set testName zeroRtx $self next set n0 [$ns node] set n1 [$ns node] $ns duplex-link $n0 $n1 .5Mb 200ms DropTail $ns duplex-link-op $n0 $n1 orient right set err [new ErrorModel/List] $err droplist {31} $ns lossmodel $err $n0 $n1 set sctp0 [new Agent/SCTP] $ns attach-agent $n0 $sctp0 $sctp0 set mtu_ 1500 $sctp0 set dataChunkSize_ 1468 $sctp0 set numOutStreams_ 1 $sctp0 set numUnrelStreams_ 1 if {$quiet == 0} { $sctp0 set debugMask_ -1 $sctp0 set debugFileIndex_ 0 set trace_ch [open trace.sctp w] $sctp0 set trace_all_ 1 $sctp0 trace cwnd_ $sctp0 trace rto_ $sctp0 trace errorCount_ $sctp0 attach $trace_ch } set sctp1 [new Agent/SCTP] $ns attach-agent $n1 $sctp1 $sctp1 set mtu_ 1500 $sctp1 set initialRwnd_ 131072 $sctp1 set useDelayedSacks_ 1 if {$quiet == 0} { $sctp1 set debugMask_ -1 $sctp1 set debugFileIndex_ 1 } $ns connect $sctp0 $sctp1 set ftp0 [new Application/FTP] $ftp0 attach-agent $sctp0 } Test/sctp-zeroRtx instproc run {} { $self instvar ns ftp0 $ns at 0.5 "$ftp0 start" $ns at 6.0 "$self finish" $ns run } Test/sctp-zeroRtx-burstLoss instproc init {} { $self instvar ns testName ftp0 global quiet set testName zeroRtx-burstLoss $self next set n0 [$ns node] set n1 [$ns node] $ns duplex-link $n0 $n1 .5Mb 200ms DropTail $ns duplex-link-op $n0 $n1 orient right set err [new ErrorModel/List] $err droplist {17 18 19 20 21} $ns lossmodel $err $n0 $n1 set sctp0 [new Agent/SCTP] $ns attach-agent $n0 $sctp0 $sctp0 set mtu_ 1500 $sctp0 set dataChunkSize_ 1468 $sctp0 set numOutStreams_ 1 $sctp0 set numUnrelStreams_ 1 if {$quiet == 0} { $sctp0 set debugMask_ -1 $sctp0 set debugFileIndex_ 0 set trace_ch [open trace.sctp w] $sctp0 set trace_all_ 1 $sctp0 trace cwnd_ $sctp0 trace rto_ $sctp0 trace errorCount_ $sctp0 attach $trace_ch } set sctp1 [new Agent/SCTP] $ns attach-agent $n1 $sctp1 $sctp1 set mtu_ 1500 $sctp1 set initialRwnd_ 131072 $sctp1 set useDelayedSacks_ 0 if {$quiet == 0} { $sctp1 set debugMask_ -1 $sctp1 set debugFileIndex_ 1 } $ns connect $sctp0 $sctp1 set ftp0 [new Application/FTP] $ftp0 attach-agent $sctp0 } Test/sctp-zeroRtx-burstLoss instproc run {} { $self instvar ns ftp0 $ns at 0.5 "$ftp0 start" $ns at 5.0 "$self finish" $ns run } Test/sctp-hbAfterRto-2packetsTimeout instproc init {} { $self instvar ns testName ftp0 global quiet set testName hbAfterRto-2packetsTimeout $self next set n0 [$ns node] set n1 [$ns node] $ns duplex-link $n0 $n1 .5Mb 200ms DropTail $ns duplex-link-op $n0 $n1 orient right set err [new ErrorModel/List] $err droplist {15 16 32 33} $ns lossmodel $err $n0 $n1 set sctp0 [new Agent/SCTP/HbAfterRto] $ns attach-agent $n0 $sctp0 $sctp0 set mtu_ 1500 $sctp0 set dataChunkSize_ 1468 $sctp0 set numOutStreams_ 1 if {$quiet == 0} { $sctp0 set debugMask_ -1 $sctp0 set debugFileIndex_ 0 set trace_ch [open trace.sctp w] $sctp0 set trace_all_ 1 $sctp0 trace cwnd_ $sctp0 trace rto_ $sctp0 trace errorCount_ $sctp0 attach $trace_ch } set sctp1 [new Agent/SCTP/HbAfterRto] $ns attach-agent $n1 $sctp1 $sctp1 set mtu_ 1500 $sctp1 set initialRwnd_ 131072 $sctp1 set useDelayedSacks_ 0 if {$quiet == 0} { $sctp1 set debugMask_ -1 $sctp1 set debugFileIndex_ 1 } $ns connect $sctp0 $sctp1 set ftp0 [new Application/FTP] $ftp0 attach-agent $sctp0 } Test/sctp-hbAfterRto-2packetsTimeout instproc run {} { $self instvar ns ftp0 $ns at 0.5 "$ftp0 start" $ns at 4.6 "$ftp0 stop" $ns at 10.0 "$self finish" $ns run } Test/sctp-hbAfterRto-multihome2-2Timeout instproc init {} { $self instvar ns testName ftp0 global quiet set testName hbAfterRto-multihome2-2Timeout $self next set host0_core [$ns node] set host0_if0 [$ns node] set host0_if1 [$ns node] $host0_core color Red $host0_if0 color Red $host0_if1 color Red $ns multihome-add-interface $host0_core $host0_if0 $ns multihome-add-interface $host0_core $host0_if1 set host1_core [$ns node] set host1_if0 [$ns node] set host1_if1 [$ns node] $host1_core color Blue $host1_if0 color Blue $host1_if1 color Blue $ns multihome-add-interface $host1_core $host1_if0 $ns multihome-add-interface $host1_core $host1_if1 $ns duplex-link $host0_if0 $host1_if0 .5Mb 200ms DropTail $ns duplex-link $host0_if1 $host1_if1 .5Mb 200ms DropTail set err0 [new ErrorModel/List] $err0 droplist {16} $ns lossmodel $err0 $host0_if0 $host1_if0 set err1 [new ErrorModel/List] $err1 droplist {1} $ns lossmodel $err1 $host0_if1 $host1_if1 set sctp0 [new Agent/SCTP/HbAfterRto] $ns multihome-attach-agent $host0_core $sctp0 $sctp0 set mtu_ 1500 $sctp0 set dataChunkSize_ 1468 $sctp0 set numOutStreams_ 1 if {$quiet == 0} { $sctp0 set debugMask_ -1 $sctp0 set debugFileIndex_ 0 set trace_ch [open trace.sctp w] $sctp0 set trace_all_ 1 $sctp0 trace cwnd_ $sctp0 trace rto_ $sctp0 trace errorCount_ $sctp0 attach $trace_ch } set sctp1 [new Agent/SCTP/HbAfterRto] $ns multihome-attach-agent $host1_core $sctp1 $sctp1 set mtu_ 1500 $sctp1 set initialRwnd_ 131072 $sctp1 set useDelayedSacks_ 1 if {$quiet == 0} { $sctp1 set debugMask_ -1 $sctp1 set debugFileIndex_ 1 } $ns connect $sctp0 $sctp1 $sctp0 set-primary-destination $host1_if0 set ftp0 [new Application/FTP] $ftp0 attach-agent $sctp0 } Test/sctp-hbAfterRto-multihome2-2Timeout instproc run {} { $self instvar ns ftp0 $ns at 0.5 "$ftp0 start" $ns at 9.0 "$ftp0 stop" $ns at 12.0 "$self finish" $ns run } Test/sctp-multipleFastRtx-2packetsTimeout instproc init {} { $self instvar ns testName ftp0 global quiet set testName multipleFastRtx-2packetsTimeout $self next set n0 [$ns node] set n1 [$ns node] $ns duplex-link $n0 $n1 .5Mb 200ms DropTail $ns duplex-link-op $n0 $n1 orient right set err [new ErrorModel/List] $err droplist {15 16 32 33} $ns lossmodel $err $n0 $n1 set sctp0 [new Agent/SCTP/MultipleFastRtx] $ns attach-agent $n0 $sctp0 $sctp0 set mtu_ 1500 $sctp0 set dataChunkSize_ 1468 $sctp0 set numOutStreams_ 1 if {$quiet == 0} { $sctp0 set debugMask_ -1 $sctp0 set debugFileIndex_ 0 set trace_ch [open trace.sctp w] $sctp0 set trace_all_ 1 $sctp0 trace cwnd_ $sctp0 trace rto_ $sctp0 trace errorCount_ $sctp0 attach $trace_ch } set sctp1 [new Agent/SCTP/MultipleFastRtx] $ns attach-agent $n1 $sctp1 $sctp1 set mtu_ 1500 $sctp1 set initialRwnd_ 131072 $sctp1 set useDelayedSacks_ 0 if {$quiet == 0} { $sctp1 set debugMask_ -1 $sctp1 set debugFileIndex_ 1 } $ns connect $sctp0 $sctp1 set ftp0 [new Application/FTP] $ftp0 attach-agent $sctp0 } Test/sctp-multipleFastRtx-2packetsTimeout instproc run {} { $self instvar ns ftp0 $ns at 0.5 "$ftp0 start" $ns at 4.5 "$ftp0 stop" $ns at 10.0 "$self finish" $ns run } Test/sctp-multipleFastRtx-multihome2-2Timeout instproc init {} { $self instvar ns testName ftp0 global quiet set testName multipleFastRtx-multihome2-2Timeout $self next set host0_core [$ns node] set host0_if0 [$ns node] set host0_if1 [$ns node] $host0_core color Red $host0_if0 color Red $host0_if1 color Red $ns multihome-add-interface $host0_core $host0_if0 $ns multihome-add-interface $host0_core $host0_if1 set host1_core [$ns node] set host1_if0 [$ns node] set host1_if1 [$ns node] $host1_core color Blue $host1_if0 color Blue $host1_if1 color Blue $ns multihome-add-interface $host1_core $host1_if0 $ns multihome-add-interface $host1_core $host1_if1 $ns duplex-link $host0_if0 $host1_if0 .5Mb 200ms DropTail $ns duplex-link $host0_if1 $host1_if1 .5Mb 200ms DropTail set err0 [new ErrorModel/List] $err0 droplist {16} $ns lossmodel $err0 $host0_if0 $host1_if0 set err1 [new ErrorModel/List] $err1 droplist {1} $ns lossmodel $err1 $host0_if1 $host1_if1 set sctp0 [new Agent/SCTP/MultipleFastRtx] $ns multihome-attach-agent $host0_core $sctp0 $sctp0 set mtu_ 1500 $sctp0 set dataChunkSize_ 1468 $sctp0 set numOutStreams_ 1 if {$quiet == 0} { $sctp0 set debugMask_ -1 $sctp0 set debugFileIndex_ 0 set trace_ch [open trace.sctp w] $sctp0 set trace_all_ 1 $sctp0 trace cwnd_ $sctp0 trace rto_ $sctp0 trace errorCount_ $sctp0 attach $trace_ch } set sctp1 [new Agent/SCTP/MultipleFastRtx] $ns multihome-attach-agent $host1_core $sctp1 $sctp1 set mtu_ 1500 $sctp1 set initialRwnd_ 131072 $sctp1 set useDelayedSacks_ 1 if {$quiet == 0} { $sctp1 set debugMask_ -1 $sctp1 set debugFileIndex_ 1 } $ns connect $sctp0 $sctp1 $sctp0 set-primary-destination $host1_if0 set ftp0 [new Application/FTP] $ftp0 attach-agent $sctp0 } Test/sctp-multipleFastRtx-multihome2-2Timeout instproc run {} { $self instvar ns ftp0 $ns at 0.5 "$ftp0 start" $ns at 9.0 "$ftp0 stop" $ns at 12.0 "$self finish" $ns run } Test/sctp-mfrHbAfterRto-Rta2-2FRsTimeout instproc init {} { $self instvar ns testName ftp0 global quiet set testName mfrHbAfterRto-Rta2-2FRsTimeout $self next set host0_core [$ns node] set host0_if0 [$ns node] set host0_if1 [$ns node] $host0_core color Red $host0_if0 color Red $host0_if1 color Red $ns multihome-add-interface $host0_core $host0_if0 $ns multihome-add-interface $host0_core $host0_if1 set host1_core [$ns node] set host1_if0 [$ns node] set host1_if1 [$ns node] $host1_core color Blue $host1_if0 color Blue $host1_if1 color Blue $ns multihome-add-interface $host1_core $host1_if0 $ns multihome-add-interface $host1_core $host1_if1 $ns duplex-link $host0_if0 $host1_if0 .5Mb 200ms DropTail $ns duplex-link $host0_if1 $host1_if1 .5Mb 200ms DropTail set err0 [new ErrorModel/List] $err0 droplist {16 29 37 38 39 40 41 42} $ns lossmodel $err0 $host0_if0 $host1_if0 set sctp0 [new Agent/SCTP/MultipleFastRtx] $ns multihome-attach-agent $host0_core $sctp0 $sctp0 set mtu_ 1500 $sctp0 set dataChunkSize_ 1468 $sctp0 set numOutStreams_ 1 $sctp0 set rtxToAlt_ 2 if {$quiet == 0} { $sctp0 set debugMask_ -1 $sctp0 set debugFileIndex_ 0 set trace_ch [open trace.sctp w] $sctp0 set trace_all_ 1 $sctp0 trace cwnd_ $sctp0 trace rto_ $sctp0 trace errorCount_ $sctp0 attach $trace_ch } set sctp1 [new Agent/SCTP/MultipleFastRtx] $ns multihome-attach-agent $host1_core $sctp1 $sctp1 set mtu_ 1500 $sctp1 set initialRwnd_ 131072 $sctp1 set useDelayedSacks_ 1 if {$quiet == 0} { $sctp1 set debugMask_ -1 $sctp1 set debugFileIndex_ 1 } $ns connect $sctp0 $sctp1 $sctp0 set-primary-destination $host1_if0 set ftp0 [new Application/FTP] $ftp0 attach-agent $sctp0 } Test/sctp-mfrHbAfterRto-Rta2-2FRsTimeout instproc run {} { $self instvar ns ftp0 $ns at 0.5 "$ftp0 start" $ns at 9.0 "$ftp0 stop" $ns at 12.0 "$self finish" $ns run } Test/sctp-timestamp-multihome2-2Rtx3 instproc init {} { $self instvar ns testName ftp0 global quiet set testName timestamp-multihome2-2Rt3 $self next set host0_core [$ns node] set host0_if0 [$ns node] set host0_if1 [$ns node] $host0_core color Red $host0_if0 color Red $host0_if1 color Red $ns multihome-add-interface $host0_core $host0_if0 $ns multihome-add-interface $host0_core $host0_if1 set host1_core [$ns node] set host1_if0 [$ns node] set host1_if1 [$ns node] $host1_core color Blue $host1_if0 color Blue $host1_if1 color Blue $ns multihome-add-interface $host1_core $host1_if0 $ns multihome-add-interface $host1_core $host1_if1 $ns duplex-link $host0_if0 $host1_if0 .5Mb 200ms DropTail $ns duplex-link $host0_if1 $host1_if1 .5Mb 200ms DropTail set err [new ErrorModel/List] $err droplist {16 17 18} $ns lossmodel $err $host0_if0 $host1_if0 set sctp0 [new Agent/SCTP/Timestamp] $ns multihome-attach-agent $host0_core $sctp0 $sctp0 set mtu_ 1500 $sctp0 set dataChunkSize_ 1456 # sctp/ip = 32, timestamp = 12 $sctp0 set numOutStreams_ 1 if {$quiet == 0} { $sctp0 set debugMask_ -1 $sctp0 set debugFileIndex_ 0 set trace_ch [open trace.sctp w] $sctp0 set trace_all_ 1 $sctp0 trace cwnd_ $sctp0 trace rto_ $sctp0 trace errorCount_ $sctp0 attach $trace_ch } set sctp1 [new Agent/SCTP/Timestamp] $ns multihome-attach-agent $host1_core $sctp1 $sctp1 set mtu_ 1500 $sctp1 set dataChunkSize_ 512 $sctp1 set initialRwnd_ 131072 $sctp1 set useDelayedSacks_ 1 if {$quiet == 0} { $sctp1 set debugMask_ -1 $sctp1 set debugFileIndex_ 1 } $ns connect $sctp0 $sctp1 $sctp0 set-primary-destination $host1_if0 set ftp0 [new Application/FTP] $ftp0 attach-agent $sctp0 } Test/sctp-timestamp-multihome2-2Rtx3 instproc run {} { $self instvar ns ftp0 $ns at 0.5 "$ftp0 start" $ns at 4.5 "$ftp0 stop" $ns at 10.0 "$self finish" $ns run } Test/sctp-timestamp-multihome2-2Timeout instproc init {} { $self instvar ns testName ftp0 global quiet set testName timestamp-multihome2-2Timeout $self next set host0_core [$ns node] set host0_if0 [$ns node] set host0_if1 [$ns node] $host0_core color Red $host0_if0 color Red $host0_if1 color Red $ns multihome-add-interface $host0_core $host0_if0 $ns multihome-add-interface $host0_core $host0_if1 set host1_core [$ns node] set host1_if0 [$ns node] set host1_if1 [$ns node] $host1_core color Blue $host1_if0 color Blue $host1_if1 color Blue $ns multihome-add-interface $host1_core $host1_if0 $ns multihome-add-interface $host1_core $host1_if1 $ns duplex-link $host0_if0 $host1_if0 .5Mb 200ms DropTail $ns duplex-link $host0_if1 $host1_if1 .5Mb 200ms DropTail set err0 [new ErrorModel/List] $err0 droplist {16} $ns lossmodel $err0 $host0_if0 $host1_if0 set err1 [new ErrorModel/List] $err1 droplist {1} $ns lossmodel $err1 $host0_if1 $host1_if1 set sctp0 [new Agent/SCTP/Timestamp] $ns multihome-attach-agent $host0_core $sctp0 $sctp0 set mtu_ 1500 $sctp0 set dataChunkSize_ 1456 # sctp/ip = 32, timestamp = 12 $sctp0 set numOutStreams_ 1 if {$quiet == 0} { $sctp0 set debugMask_ -1 $sctp0 set debugFileIndex_ 0 set trace_ch [open trace.sctp w] $sctp0 set trace_all_ 1 $sctp0 trace cwnd_ $sctp0 trace rto_ $sctp0 trace errorCount_ $sctp0 attach $trace_ch } set sctp1 [new Agent/SCTP/Timestamp] $ns multihome-attach-agent $host1_core $sctp1 $sctp1 set mtu_ 1500 $sctp1 set dataChunkSize_ 512 $sctp1 set initialRwnd_ 131072 $sctp1 set useDelayedSacks_ 1 if {$quiet == 0} { $sctp1 set debugMask_ -1 $sctp1 set debugFileIndex_ 1 } $ns connect $sctp0 $sctp1 $sctp0 set-primary-destination $host1_if0 set ftp0 [new Application/FTP] $ftp0 attach-agent $sctp0 } Test/sctp-timestamp-multihome2-2Timeout instproc run {} { $self instvar ns ftp0 $ns at 0.5 "$ftp0 start" $ns at 9.0 "$ftp0 stop" $ns at 12.0 "$self finish" $ns run } Test/sctp-packet-loss-dest-conf instproc init {} { $self instvar ns testName ftp0 global quiet set testName packet-loss-dest-conf $self next set host0_core [$ns node] set host0_if0 [$ns node] set host0_if1 [$ns node] set host0_if2 [$ns node] $host0_core color Red $host0_if0 color Red $host0_if1 color Red $host0_if2 color Red $ns multihome-add-interface $host0_core $host0_if0 $ns multihome-add-interface $host0_core $host0_if1 $ns multihome-add-interface $host0_core $host0_if2 set host1_core [$ns node] set host1_if0 [$ns node] set host1_if1 [$ns node] set host1_if2 [$ns node] $host1_core color Blue $host1_if0 color Blue $host1_if1 color Blue $host1_if2 color Blue $ns multihome-add-interface $host1_core $host1_if0 $ns multihome-add-interface $host1_core $host1_if1 $ns multihome-add-interface $host1_core $host1_if2 $ns duplex-link $host0_if0 $host1_if0 10Mb 45ms DropTail [[$ns link $host0_if0 $host1_if0] queue] set limit_ 50 $ns duplex-link $host0_if1 $host1_if1 10Mb 45ms DropTail [[$ns link $host0_if1 $host1_if1] queue] set limit_ 50 $ns duplex-link $host0_if2 $host1_if2 10Mb 45ms DropTail [[$ns link $host0_if2 $host1_if2] queue] set limit_ 50 set err0 [new ErrorModel/List] $err0 droplist {2 3} $ns lossmodel $err0 $host0_if0 $host1_if0 set sctp0 [new Agent/SCTP] $ns multihome-attach-agent $host0_core $sctp0 $sctp0 set mtu_ 1500 $sctp0 set dataChunkSize_ 1468 $sctp0 set numOutStreams_ 1 if {$quiet == 0} { $sctp0 set debugMask_ -1 $sctp0 set debugFileIndex_ 0 set trace_ch [open trace.sctp w] $sctp0 set trace_all_ 1 $sctp0 trace cwnd_ $sctp0 trace rto_ $sctp0 trace errorCount_ $sctp0 attach $trace_ch } set sctp1 [new Agent/SCTP] $ns multihome-attach-agent $host1_core $sctp1 $sctp1 set mtu_ 1500 $sctp1 set initialRwnd_ 131072 $sctp1 set useDelayedSacks_ 1 if {$quiet == 0} { $sctp1 set debugMask_ -1 $sctp1 set debugFileIndex_ 1 } $ns connect $sctp0 $sctp1 $sctp0 set-primary-destination $host1_if0 set ftp0 [new Application/FTP] $ftp0 attach-agent $sctp0 } Test/sctp-packet-loss-dest-conf instproc run {} { $self instvar ns ftp0 $ns at 0.5 "$ftp0 start" $ns at 20.0 "$self finish" $ns run } Test/sctp-cmt-2paths-64K instproc init {} { $self instvar ns testName ftp0 global quiet set testName cmt-2paths-64K $self next set host0_core [$ns node] set host0_if0 [$ns node] set host0_if1 [$ns node] set host0_if2 [$ns node] $host0_core color Red $host0_if0 color Red $host0_if1 color Red $host0_if2 color Red $ns multihome-add-interface $host0_core $host0_if0 $ns multihome-add-interface $host0_core $host0_if1 set host1_core [$ns node] set host1_if0 [$ns node] set host1_if1 [$ns node] $host1_core color Blue $host1_if0 color Blue $host1_if1 color Blue $ns multihome-add-interface $host1_core $host1_if0 $ns multihome-add-interface $host1_core $host1_if1 $ns duplex-link $host0_if0 $host1_if0 10Mb 45ms DropTail [[$ns link $host0_if0 $host1_if0] queue] set limit_ 50 $ns duplex-link $host0_if1 $host1_if1 10Mb 45ms DropTail [[$ns link $host0_if1 $host1_if1] queue] set limit_ 50 set cmt_snd [new Agent/SCTP/CMT] $ns multihome-attach-agent $host0_core $cmt_snd $cmt_snd set initialSsthresh_ 16000 $cmt_snd set mtu_ 1500 $cmt_snd set dataChunkSize_ 1468 $cmt_snd set numOutStreams_ 1 $cmt_snd set useCmtReordering_ 1 $cmt_snd set useCmtCwnd_ 1 $cmt_snd set useCmtDelAck_ 1 $cmt_snd set eCmtRtxPolicy_ 2 ; #RTX-SSTHRESH $cmt_snd set useCmtPF_ 0; # turn off CMT-PF if {$quiet == 0} { $cmt_snd set debugMask_ -1 $cmt_snd set debugFileIndex_ 0 set trace_ch [open trace.sctp w] $cmt_snd set trace_all_ 1 $cmt_snd trace cwnd_ $cmt_snd trace rto_ $cmt_snd trace errorCount_ $cmt_snd attach $trace_ch } set cmt_rcv [new Agent/SCTP/CMT] $ns multihome-attach-agent $host1_core $cmt_rcv # MTU of 1500 = 1452 data bytes $cmt_rcv set mtu_ 1500 $cmt_rcv set initialRwnd_ 65536 $cmt_rcv set useDelayedSacks_ 1 $cmt_rcv set useCmtDelAck_ 1 if {$quiet == 0} { $cmt_rcv set debugMask_ -1 $cmt_rcv set debugFileIndex_ 1 } $ns connect $cmt_snd $cmt_rcv set ftp0 [new Application/FTP] $ftp0 attach-agent $cmt_snd $cmt_snd set-primary-destination $host1_if0 } Test/sctp-cmt-2paths-64K instproc run {} { $self instvar ns ftp0 $ns at 0.0 "$ftp0 send 1452000" $ns at 20.0 "$self finish" $ns run } Test/sctp-cmt-2paths-64K-withloss instproc init {} { $self instvar ns testName ftp0 global quiet set testName cmt-2paths-64K-withloss $self next set host0_core [$ns node] set host0_if0 [$ns node] set host0_if1 [$ns node] $host0_core color Red $host0_if0 color Red $host0_if1 color Red $ns multihome-add-interface $host0_core $host0_if0 $ns multihome-add-interface $host0_core $host0_if1 set host1_core [$ns node] set host1_if0 [$ns node] set host1_if1 [$ns node] $host1_core color Blue $host1_if0 color Blue $host1_if1 color Blue $ns multihome-add-interface $host1_core $host1_if0 $ns multihome-add-interface $host1_core $host1_if1 $ns duplex-link $host0_if0 $host1_if0 10Mb 30ms DropTail [[$ns link $host0_if0 $host1_if0] queue] set limit_ 50 $ns duplex-link $host0_if1 $host1_if1 10Mb 45ms DropTail [[$ns link $host0_if1 $host1_if1] queue] set limit_ 50 set err [new ErrorModel/List] $err droplist {14 15 16} $ns lossmodel $err $host0_if0 $host1_if0 set cmt_snd [new Agent/SCTP/CMT] $ns multihome-attach-agent $host0_core $cmt_snd $cmt_snd set initialSsthresh_ 16000 $cmt_snd set mtu_ 1500 $cmt_snd set dataChunkSize_ 1468 $cmt_snd set numOutStreams_ 1 $cmt_snd set useCmtReordering_ 1 $cmt_snd set useCmtCwnd_ 1 $cmt_snd set useCmtDelAck_ 1 $cmt_snd set eCmtRtxPolicy_ 2 ; #RTX-SSTHRESH $cmt_snd set useCmtPF_ 0; # turn off CMT-PF if {$quiet == 0} { $cmt_snd set debugMask_ -1 $cmt_snd set debugFileIndex_ 0 set trace_ch [open trace.sctp w] $cmt_snd set trace_all_ 1 $cmt_snd trace cwnd_ $cmt_snd trace rto_ $cmt_snd trace errorCount_ $cmt_snd attach $trace_ch } set cmt_rcv [new Agent/SCTP/CMT] $ns multihome-attach-agent $host1_core $cmt_rcv # MTU of 1500 = 1452 data bytes $cmt_rcv set mtu_ 1500 $cmt_rcv set initialRwnd_ 65536 $cmt_rcv set useDelayedSacks_ 1 $cmt_rcv set useCmtDelAck_ 1 if {$quiet == 0} { $cmt_rcv set debugMask_ -1 $cmt_rcv set debugFileIndex_ 1 } $ns connect $cmt_snd $cmt_rcv set ftp0 [new Application/FTP] $ftp0 attach-agent $cmt_snd $cmt_snd set-primary-destination $host1_if0 } Test/sctp-cmt-2paths-64K-withloss instproc run {} { $self instvar ns ftp0 $ns at 0.0 "$ftp0 send 1452000" $ns at 20.0 "$self finish" $ns run } Test/sctp-cmt-3paths-64K instproc init {} { $self instvar ns testName ftp0 global quiet set testName cmt-3paths-64K $self next set host0_core [$ns node] set host0_if0 [$ns node] set host0_if1 [$ns node] set host0_if2 [$ns node] $host0_core color Red $host0_if0 color Red $host0_if1 color Red $host0_if2 color Red $ns multihome-add-interface $host0_core $host0_if0 $ns multihome-add-interface $host0_core $host0_if1 $ns multihome-add-interface $host0_core $host0_if2 set host1_core [$ns node] set host1_if0 [$ns node] set host1_if1 [$ns node] set host1_if2 [$ns node] $host1_core color Blue $host1_if0 color Blue $host1_if1 color Blue $host1_if2 color Blue $ns multihome-add-interface $host1_core $host1_if0 $ns multihome-add-interface $host1_core $host1_if1 $ns multihome-add-interface $host1_core $host1_if2 $ns duplex-link $host0_if0 $host1_if0 10Mb 45ms DropTail [[$ns link $host0_if0 $host1_if0] queue] set limit_ 50 $ns duplex-link $host0_if1 $host1_if1 10Mb 45ms DropTail [[$ns link $host0_if1 $host1_if1] queue] set limit_ 50 $ns duplex-link $host0_if2 $host1_if2 10Mb 45ms DropTail [[$ns link $host0_if2 $host1_if2] queue] set limit_ 50 set cmt_snd [new Agent/SCTP/CMT] $ns multihome-attach-agent $host0_core $cmt_snd $cmt_snd set initialSsthresh_ 16000 $cmt_snd set mtu_ 1500 $cmt_snd set dataChunkSize_ 1468 $cmt_snd set numOutStreams_ 1 $cmt_snd set useCmtReordering_ 1 $cmt_snd set useCmtCwnd_ 1 $cmt_snd set useCmtDelAck_ 1 $cmt_snd set eCmtRtxPolicy_ 2 ; #RTX-SSTHRESH $cmt_snd set useCmtPF_ 0; # turn off CMT-PF if {$quiet == 0} { $cmt_snd set debugMask_ -1 $cmt_snd set debugFileIndex_ 0 set trace_ch [open trace.sctp w] $cmt_snd set trace_all_ 1 $cmt_snd trace cwnd_ $cmt_snd trace rto_ $cmt_snd trace errorCount_ $cmt_snd attach $trace_ch } set cmt_rcv [new Agent/SCTP/CMT] $ns multihome-attach-agent $host1_core $cmt_rcv # MTU of 1500 = 1452 data bytes $cmt_rcv set mtu_ 1500 $cmt_rcv set initialRwnd_ 65536 $cmt_rcv set useDelayedSacks_ 1 $cmt_rcv set useCmtDelAck_ 1 if {$quiet == 0} { $cmt_rcv set debugMask_ -1 $cmt_rcv set debugFileIndex_ 1 } $ns connect $cmt_snd $cmt_rcv set ftp0 [new Application/FTP] $ftp0 attach-agent $cmt_snd $cmt_snd set-primary-destination $host1_if0 } Test/sctp-cmt-3paths-64K instproc run {} { $self instvar ns ftp0 $ns at 0.0 "$ftp0 send 1452000" $ns at 20.0 "$self finish" $ns run } Test/sctp-cmt-2paths-1path-fails instproc init {} { $self instvar ns testName ftp0 global quiet set testName cmt-2paths-1path-fails $self next set host0_core [$ns node] set host0_if0 [$ns node] set host0_if1 [$ns node] $host0_core color Red $host0_if0 color Red $host0_if1 color Red $ns multihome-add-interface $host0_core $host0_if0 $ns multihome-add-interface $host0_core $host0_if1 set host1_core [$ns node] set host1_if0 [$ns node] set host1_if1 [$ns node] $host1_core color Blue $host1_if0 color Blue $host1_if1 color Blue $ns multihome-add-interface $host1_core $host1_if0 $ns multihome-add-interface $host1_core $host1_if1 $ns duplex-link $host0_if0 $host1_if0 10Mb 45ms DropTail [[$ns link $host0_if0 $host1_if0] queue] set limit_ 50 $ns duplex-link $host0_if1 $host1_if1 10Mb 45ms DropTail [[$ns link $host0_if1 $host1_if1] queue] set limit_ 50 set cmt_snd [new Agent/SCTP/CMT] $ns multihome-attach-agent $host0_core $cmt_snd $cmt_snd set initialSsthresh_ 16000 $cmt_snd set mtu_ 1500 $cmt_snd set dataChunkSize_ 1468 $cmt_snd set numOutStreams_ 1 $cmt_snd set useCmtReordering_ 1 $cmt_snd set useCmtCwnd_ 1 $cmt_snd set useCmtDelAck_ 1 $cmt_snd set eCmtRtxPolicy_ 2 ; #RTX-SSTHRESH $cmt_snd set useCmtPF_ 0; # turn off CMT-PF if {$quiet == 0} { $cmt_snd set debugMask_ -1 $cmt_snd set debugFileIndex_ 0 set trace_ch [open trace.sctp w] $cmt_snd set trace_all_ 1 $cmt_snd trace cwnd_ $cmt_snd trace rto_ $cmt_snd trace errorCount_ $cmt_snd attach $trace_ch } set cmt_rcv [new Agent/SCTP/CMT] $ns multihome-attach-agent $host1_core $cmt_rcv # MTU of 1500 = 1452 data bytes $cmt_rcv set mtu_ 1500 $cmt_rcv set initialRwnd_ 65536 $cmt_rcv set useDelayedSacks_ 1 $cmt_rcv set useCmtDelAck_ 1 if {$quiet == 0} { $cmt_rcv set debugMask_ -1 $cmt_rcv set debugFileIndex_ 1 } $ns connect $cmt_snd $cmt_rcv set ftp0 [new Application/FTP] $ftp0 attach-agent $cmt_snd $cmt_snd set-primary-destination $host1_if0 $ns rtmodel-at 10.0 down $host0_if1 $host1_if1 } Test/sctp-cmt-2paths-1path-fails instproc run {} { $self instvar ns ftp0 $ns at 0.0 "$ftp0 send 14520000" $ns at 120.0 "$self finish" $ns run } Test/sctp-cmt-3paths-1path-fails instproc init {} { $self instvar ns testName ftp0 global quiet set testName cmt-3paths-1path-fails $self next set host0_core [$ns node] set host0_if0 [$ns node] set host0_if1 [$ns node] set host0_if2 [$ns node] $host0_core color Red $host0_if0 color Red $host0_if1 color Red $host0_if2 color Red $ns multihome-add-interface $host0_core $host0_if0 $ns multihome-add-interface $host0_core $host0_if1 $ns multihome-add-interface $host0_core $host0_if2 set host1_core [$ns node] set host1_if0 [$ns node] set host1_if1 [$ns node] set host1_if2 [$ns node] $host1_core color Blue $host1_if0 color Blue $host1_if1 color Blue $host1_if2 color Blue $ns multihome-add-interface $host1_core $host1_if0 $ns multihome-add-interface $host1_core $host1_if1 $ns multihome-add-interface $host1_core $host1_if2 $ns duplex-link $host0_if0 $host1_if0 10Mb 45ms DropTail [[$ns link $host0_if0 $host1_if0] queue] set limit_ 50 $ns duplex-link $host0_if1 $host1_if1 10Mb 45ms DropTail [[$ns link $host0_if1 $host1_if1] queue] set limit_ 50 $ns duplex-link $host0_if2 $host1_if2 10Mb 45ms DropTail [[$ns link $host0_if2 $host1_if2] queue] set limit_ 50 set cmt_snd [new Agent/SCTP/CMT] $ns multihome-attach-agent $host0_core $cmt_snd $cmt_snd set initialSsthresh_ 16000 $cmt_snd set mtu_ 1500 $cmt_snd set dataChunkSize_ 1468 $cmt_snd set numOutStreams_ 1 $cmt_snd set useCmtReordering_ 1 $cmt_snd set useCmtCwnd_ 1 $cmt_snd set useCmtDelAck_ 1 $cmt_snd set eCmtRtxPolicy_ 2 ; #RTX-SSTHRESH $cmt_snd set useCmtPF_ 0; # turn off CMT-PF if {$quiet == 0} { $cmt_snd set debugMask_ -1 $cmt_snd set debugFileIndex_ 0 set trace_ch [open trace.sctp w] $cmt_snd set trace_all_ 1 $cmt_snd trace cwnd_ $cmt_snd trace rto_ $cmt_snd trace errorCount_ $cmt_snd attach $trace_ch } set cmt_rcv [new Agent/SCTP/CMT] $ns multihome-attach-agent $host1_core $cmt_rcv # MTU of 1500 = 1452 data bytes $cmt_rcv set mtu_ 1500 $cmt_rcv set initialRwnd_ 65536 $cmt_rcv set useDelayedSacks_ 1 $cmt_rcv set useCmtDelAck_ 1 if {$quiet == 0} { $cmt_rcv set debugMask_ -1 $cmt_rcv set debugFileIndex_ 1 } $ns connect $cmt_snd $cmt_rcv set ftp0 [new Application/FTP] $ftp0 attach-agent $cmt_snd $cmt_snd set-primary-destination $host1_if0 $ns rtmodel-at 10.0 down $host0_if1 $host1_if1 } Test/sctp-cmt-3paths-1path-fails instproc run {} { $self instvar ns ftp0 $ns at 0.0 "$ftp0 send 14520000" $ns at 100.0 "$self finish" $ns run } Test/sctp-cmt-packet-loss-dest-conf instproc init {} { $self instvar ns testName ftp0 global quiet set testName cmt-packet-loss-dest-conf $self next set host0_core [$ns node] set host0_if0 [$ns node] set host0_if1 [$ns node] $host0_core color Red $host0_if0 color Red $host0_if1 color Red $ns multihome-add-interface $host0_core $host0_if0 $ns multihome-add-interface $host0_core $host0_if1 set host1_core [$ns node] set host1_if0 [$ns node] set host1_if1 [$ns node] $host1_core color Blue $host1_if0 color Blue $host1_if1 color Blue $ns multihome-add-interface $host1_core $host1_if0 $ns multihome-add-interface $host1_core $host1_if1 $ns duplex-link $host0_if0 $host1_if0 10Mb 45ms DropTail [[$ns link $host0_if0 $host1_if0] queue] set limit_ 50 $ns duplex-link $host0_if1 $host1_if1 10Mb 45ms DropTail [[$ns link $host0_if1 $host1_if1] queue] set limit_ 50 set err [new ErrorModel/List] $err droplist {2 3} $ns lossmodel $err $host0_if0 $host1_if0 set cmt_snd [new Agent/SCTP/CMT] $ns multihome-attach-agent $host0_core $cmt_snd $cmt_snd set initialSsthresh_ 16000 $cmt_snd set mtu_ 1500 $cmt_snd set dataChunkSize_ 1468 $cmt_snd set numOutStreams_ 1 $cmt_snd set useCmtReordering_ 1 $cmt_snd set useCmtCwnd_ 1 $cmt_snd set useCmtDelAck_ 1 $cmt_snd set eCmtRtxPolicy_ 2 #RTX-SSTHRESH $cmt_snd set useCmtPF_ 0; # turn off CMT-PF if {$quiet == 0} { $cmt_snd set debugMask_ -1 $cmt_snd set debugFileIndex_ 0 set trace_ch [open trace.sctp w] $cmt_snd set trace_all_ 1 $cmt_snd trace cwnd_ $cmt_snd trace rto_ $cmt_snd trace errorCount_ $cmt_snd attach $trace_ch } set cmt_rcv [new Agent/SCTP/CMT] $ns multihome-attach-agent $host1_core $cmt_rcv # MTU of 1500 = 1452 data bytes $cmt_rcv set mtu_ 1500 $cmt_rcv set initialRwnd_ 65536 $cmt_rcv set useDelayedSacks_ 1 $cmt_rcv set useCmtDelAck_ 1 if {$quiet == 0} { $cmt_rcv set debugMask_ -1 $cmt_rcv set debugFileIndex_ 1 } $ns connect $cmt_snd $cmt_rcv set ftp0 [new Application/FTP] $ftp0 attach-agent $cmt_snd $cmt_snd set-primary-destination $host1_if0 } Test/sctp-cmt-packet-loss-dest-conf instproc run {} { $self instvar ns ftp0 $ns at 0.0 "$ftp0 send 1452000" $ns at 20.0 "$self finish" $ns run } Test/sctp-cmt-Rtx-ssthresh instproc init {} { $self instvar ns testName ftp0 global quiet set testName cmt-Rtx-ssthresh $self next set host0_core [$ns node] set host0_if0 [$ns node] set host0_if1 [$ns node] $host0_core color Red $host0_if0 color Red $host0_if1 color Red $ns multihome-add-interface $host0_core $host0_if0 $ns multihome-add-interface $host0_core $host0_if1 set host1_core [$ns node] set host1_if0 [$ns node] set host1_if1 [$ns node] $host1_core color Blue $host1_if0 color Blue $host1_if1 color Blue $ns multihome-add-interface $host1_core $host1_if0 $ns multihome-add-interface $host1_core $host1_if1 $ns duplex-link $host0_if0 $host1_if0 10Mb 45ms DropTail [[$ns link $host0_if0 $host1_if0] queue] set limit_ 50 $ns duplex-link $host0_if1 $host1_if1 10Mb 45ms DropTail [[$ns link $host0_if1 $host1_if1] queue] set limit_ 50 set err [new ErrorModel/List] $err droplist {6 7 8 9 10 11} $ns lossmodel $err $host0_if0 $host1_if0 set cmt_snd [new Agent/SCTP/CMT] $ns multihome-attach-agent $host0_core $cmt_snd $cmt_snd set initialSsthresh_ 16000 $cmt_snd set mtu_ 1500 $cmt_snd set dataChunkSize_ 1468 $cmt_snd set numOutStreams_ 1 $cmt_snd set useCmtReordering_ 1 $cmt_snd set useCmtCwnd_ 1 $cmt_snd set useCmtDelAck_ 1 $cmt_snd set eCmtRtxPolicy_ 2 #RTX-SSTHRESH $cmt_snd set useCmtPF_ 0; # turn off CMT-PF if {$quiet == 0} { $cmt_snd set debugMask_ -1 $cmt_snd set debugFileIndex_ 0 set trace_ch [open trace.sctp w] $cmt_snd set trace_all_ 1 $cmt_snd trace cwnd_ $cmt_snd trace rto_ $cmt_snd trace errorCount_ $cmt_snd attach $trace_ch } set cmt_rcv [new Agent/SCTP/CMT] $ns multihome-attach-agent $host1_core $cmt_rcv # MTU of 1500 = 1452 data bytes $cmt_rcv set mtu_ 1500 $cmt_rcv set initialRwnd_ 65536 $cmt_rcv set useDelayedSacks_ 1 $cmt_rcv set useCmtDelAck_ 1 if {$quiet == 0} { $cmt_rcv set debugMask_ -1 $cmt_rcv set debugFileIndex_ 1 } $ns connect $cmt_snd $cmt_rcv set ftp0 [new Application/FTP] $ftp0 attach-agent $cmt_snd $cmt_snd set-primary-destination $host1_if0 } Test/sctp-cmt-Rtx-ssthresh instproc run {} { $self instvar ns ftp0 $ns at 0.0 "$ftp0 send 1452000" $ns at 20.0 "$self finish" $ns run } Test/sctp-cmt-Rtx-cwnd instproc init {} { $self instvar ns testName ftp0 global quiet set testName cmt-Rtx-cwnd $self next set host0_core [$ns node] set host0_if0 [$ns node] set host0_if1 [$ns node] $host0_core color Red $host0_if0 color Red $host0_if1 color Red $ns multihome-add-interface $host0_core $host0_if0 $ns multihome-add-interface $host0_core $host0_if1 set host1_core [$ns node] set host1_if0 [$ns node] set host1_if1 [$ns node] $host1_core color Blue $host1_if0 color Blue $host1_if1 color Blue $ns multihome-add-interface $host1_core $host1_if0 $ns multihome-add-interface $host1_core $host1_if1 $ns duplex-link $host0_if0 $host1_if0 10Mb 35ms DropTail [[$ns link $host0_if0 $host1_if0] queue] set limit_ 50 $ns duplex-link $host0_if1 $host1_if1 10Mb 45ms DropTail [[$ns link $host0_if1 $host1_if1] queue] set limit_ 50 set err [new ErrorModel/List] $err droplist {30} $ns lossmodel $err $host0_if0 $host1_if0 set cmt_snd [new Agent/SCTP/CMT] $ns multihome-attach-agent $host0_core $cmt_snd $cmt_snd set initialSsthresh_ 16000 $cmt_snd set mtu_ 1500 $cmt_snd set dataChunkSize_ 1468 $cmt_snd set numOutStreams_ 1 $cmt_snd set useCmtReordering_ 1 $cmt_snd set useCmtCwnd_ 1 $cmt_snd set useCmtDelAck_ 1 $cmt_snd set eCmtRtxPolicy_ 4 #RTX-CWND $cmt_snd set useCmtPF_ 0; # turn off CMT-PF if {$quiet == 0} { $cmt_snd set debugMask_ -1 $cmt_snd set debugFileIndex_ 0 set trace_ch [open trace.sctp w] $cmt_snd set trace_all_ 1 $cmt_snd trace cwnd_ $cmt_snd trace rto_ $cmt_snd trace errorCount_ $cmt_snd attach $trace_ch } set cmt_rcv [new Agent/SCTP/CMT] $ns multihome-attach-agent $host1_core $cmt_rcv # MTU of 1500 = 1452 data bytes $cmt_rcv set mtu_ 1500 $cmt_rcv set initialRwnd_ 65536 $cmt_rcv set useDelayedSacks_ 1 $cmt_rcv set useCmtDelAck_ 1 if {$quiet == 0} { $cmt_rcv set debugMask_ -1 $cmt_rcv set debugFileIndex_ 1 } $ns connect $cmt_snd $cmt_rcv set ftp0 [new Application/FTP] $ftp0 attach-agent $cmt_snd $cmt_snd set-primary-destination $host1_if0 } Test/sctp-cmt-Rtx-cwnd instproc run {} { $self instvar ns ftp0 $ns at 0.0 "$ftp0 send 1452000" $ns at 20.0 "$self finish" $ns run } Test/sctp-cmt-Timeout-pmr instproc init {} { $self instvar ns testName ftp0 global quiet set testName cmt-Timeout-pmr $self next set host0_core [$ns node] set host0_if0 [$ns node] set host0_if1 [$ns node] $host0_core color Red $host0_if0 color Red $host0_if1 color Red $ns multihome-add-interface $host0_core $host0_if0 $ns multihome-add-interface $host0_core $host0_if1 set host1_core [$ns node] set host1_if0 [$ns node] set host1_if1 [$ns node] $host1_core color Blue $host1_if0 color Blue $host1_if1 color Blue $ns multihome-add-interface $host1_core $host1_if0 $ns multihome-add-interface $host1_core $host1_if1 $ns duplex-link $host0_if0 $host1_if0 10Mb 45ms DropTail [[$ns link $host0_if0 $host1_if0] queue] set limit_ 50 $ns duplex-link $host0_if1 $host1_if1 10Mb 45ms DropTail [[$ns link $host0_if1 $host1_if1] queue] set limit_ 50 set err [new ErrorModel/List] $err droplist {3 4 5 6 7 8 9 10 11} $ns lossmodel $err $host0_if0 $host1_if0 set cmt_snd [new Agent/SCTP/CMT] $ns multihome-attach-agent $host0_core $cmt_snd $cmt_snd set initialSsthresh_ 16000 $cmt_snd set mtu_ 1500 $cmt_snd set dataChunkSize_ 1468 $cmt_snd set numOutStreams_ 1 $cmt_snd set useCmtReordering_ 1 $cmt_snd set useCmtCwnd_ 1 $cmt_snd set useCmtDelAck_ 1 $cmt_snd set eCmtRtxPolicy_ 2 #RTX-SSTHRESH $cmt_snd set useCmtPF_ 0; # turn off CMT-PF if {$quiet == 0} { $cmt_snd set debugMask_ -1 $cmt_snd set debugFileIndex_ 0 set trace_ch [open trace.sctp w] $cmt_snd set trace_all_ 1 $cmt_snd trace cwnd_ $cmt_snd trace rto_ $cmt_snd trace errorCount_ $cmt_snd attach $trace_ch } set cmt_rcv [new Agent/SCTP/CMT] $ns multihome-attach-agent $host1_core $cmt_rcv # MTU of 1500 = 1452 data bytes $cmt_rcv set mtu_ 1500 $cmt_rcv set initialRwnd_ 65536 $cmt_rcv set useDelayedSacks_ 1 $cmt_rcv set useCmtDelAck_ 1 if {$quiet == 0} { $cmt_rcv set debugMask_ -1 $cmt_rcv set debugFileIndex_ 1 } $ns connect $cmt_snd $cmt_rcv set ftp0 [new Application/FTP] $ftp0 attach-agent $cmt_snd $cmt_snd set-primary-destination $host1_if0 } Test/sctp-cmt-Timeout-pmr instproc run {} { $self instvar ns ftp0 $ns at 0.0 "$ftp0 send 14520000" $ns at 100.0 "$self finish" $ns run } Test/sctp-cmt-multihome2-2Timeout instproc init {} { $self instvar ns testName ftp0 global quiet set testName cmt-multihome2-2Timeout $self next set host0_core [$ns node] set host0_if0 [$ns node] set host0_if1 [$ns node] $host0_core color Red $host0_if0 color Red $host0_if1 color Red $ns multihome-add-interface $host0_core $host0_if0 $ns multihome-add-interface $host0_core $host0_if1 set host1_core [$ns node] set host1_if0 [$ns node] set host1_if1 [$ns node] $host1_core color Blue $host1_if0 color Blue $host1_if1 color Blue $ns multihome-add-interface $host1_core $host1_if0 $ns multihome-add-interface $host1_core $host1_if1 $ns duplex-link $host0_if0 $host1_if0 .5Mb 200ms DropTail $ns duplex-link $host0_if1 $host1_if1 .5Mb 200ms DropTail set err0 [new ErrorModel/List] $err0 droplist {4} $ns lossmodel $err0 $host0_if0 $host1_if0 set err1 [new ErrorModel/List] $err1 droplist {12} $ns lossmodel $err1 $host0_if1 $host1_if1 set sctp0 [new Agent/SCTP/CMT] $ns multihome-attach-agent $host0_core $sctp0 $sctp0 set initialSsthresh_ 16000 $sctp0 set mtu_ 1500 $sctp0 set dataChunkSize_ 1468 $sctp0 set numOutStreams_ 1 $sctp0 set useCmtReordering_ 1 $sctp0 set useCmtCwnd_ 1 $sctp0 set useCmtDelAck_ 1 $sctp0 set eCmtRtxPolicy_ 2 ; #RTX-SSTHRESH $sctp0 set useCmtPF_ 0; # turn off CMT-PF if {$quiet == 0} { $sctp0 set debugMask_ -1 $sctp0 set debugFileIndex_ 0 set trace_ch [open trace.sctp w] $sctp0 set trace_all_ 1 $sctp0 trace cwnd_ $sctp0 trace rto_ $sctp0 trace errorCount_ $sctp0 attach $trace_ch } set sctp1 [new Agent/SCTP/CMT] $ns multihome-attach-agent $host1_core $sctp1 # MTU of 1500 = 1452 data bytes $sctp1 set mtu_ 1500 $sctp1 set initialRwnd_ 65536 $sctp1 set useDelayedSacks_ 1 $sctp1 set useCmtDelAck_ 1 if {$quiet == 0} { $sctp1 set debugMask_ -1 $sctp1 set debugFileIndex_ 1 } $ns connect $sctp0 $sctp1 $sctp0 set-primary-destination $host1_if0 set ftp0 [new Application/FTP] $ftp0 attach-agent $sctp0 } Test/sctp-cmt-multihome2-2Timeout instproc run {} { $self instvar ns ftp0 $ns at 0.5 "$ftp0 start" $ns at 12.0 "$self finish" $ns run } Test/sctp-cmt-pf-2paths-1path-fails instproc init {} { $self instvar ns testName ftp0 global quiet set testName cmt-pf-2paths-1path-fails $self next set host0_core [$ns node] set host0_if0 [$ns node] set host0_if1 [$ns node] $host0_core color Red $host0_if0 color Red $host0_if1 color Red $ns multihome-add-interface $host0_core $host0_if0 $ns multihome-add-interface $host0_core $host0_if1 set host1_core [$ns node] set host1_if0 [$ns node] set host1_if1 [$ns node] $host1_core color Blue $host1_if0 color Blue $host1_if1 color Blue $ns multihome-add-interface $host1_core $host1_if0 $ns multihome-add-interface $host1_core $host1_if1 $ns duplex-link $host0_if0 $host1_if0 10Mb 45ms DropTail [[$ns link $host0_if0 $host1_if0] queue] set limit_ 50 $ns duplex-link $host0_if1 $host1_if1 10Mb 45ms DropTail [[$ns link $host0_if1 $host1_if1] queue] set limit_ 50 set cmt_snd [new Agent/SCTP/CMT] $ns multihome-attach-agent $host0_core $cmt_snd $cmt_snd set initialSsthresh_ 16000 $cmt_snd set mtu_ 1500 $cmt_snd set dataChunkSize_ 1468 $cmt_snd set numOutStreams_ 1 $cmt_snd set useCmtReordering_ 1 $cmt_snd set useCmtCwnd_ 1 $cmt_snd set useCmtDelAck_ 1 $cmt_snd set eCmtRtxPolicy_ 2 ; #RTX-SSTHRESH if {$quiet == 0} { $cmt_snd set debugMask_ -1 $cmt_snd set debugFileIndex_ 0 set trace_ch [open trace.sctp w] $cmt_snd set trace_all_ 1 $cmt_snd trace cwnd_ $cmt_snd trace rto_ $cmt_snd trace errorCount_ $cmt_snd attach $trace_ch } set cmt_rcv [new Agent/SCTP/CMT] $ns multihome-attach-agent $host1_core $cmt_rcv # MTU of 1500 = 1452 data bytes $cmt_rcv set mtu_ 1500 $cmt_rcv set initialRwnd_ 65536 $cmt_rcv set useDelayedSacks_ 1 $cmt_rcv set useCmtDelAck_ 1 if {$quiet == 0} { $cmt_rcv set debugMask_ -1 $cmt_rcv set debugFileIndex_ 1 } $ns connect $cmt_snd $cmt_rcv set ftp0 [new Application/FTP] $ftp0 attach-agent $cmt_snd $cmt_snd set-primary-destination $host1_if0 $ns rtmodel-at 10.0 down $host0_if1 $host1_if1 } Test/sctp-cmt-pf-2paths-1path-fails instproc run {} { $self instvar ns ftp0 $ns at 0.0 "$ftp0 send 14520000" $ns at 100.0 "$self finish" $ns run } Test/sctp-cmt-pf-3paths-1path-fails instproc init {} { $self instvar ns testName ftp0 global quiet set testName cmt-pf-3paths-1path-fails $self next set host0_core [$ns node] set host0_if0 [$ns node] set host0_if1 [$ns node] set host0_if2 [$ns node] $host0_core color Red $host0_if0 color Red $host0_if1 color Red $host0_if2 color Red $ns multihome-add-interface $host0_core $host0_if0 $ns multihome-add-interface $host0_core $host0_if1 $ns multihome-add-interface $host0_core $host0_if2 set host1_core [$ns node] set host1_if0 [$ns node] set host1_if1 [$ns node] set host1_if2 [$ns node] $host1_core color Blue $host1_if0 color Blue $host1_if1 color Blue $host1_if2 color Blue $ns multihome-add-interface $host1_core $host1_if0 $ns multihome-add-interface $host1_core $host1_if1 $ns multihome-add-interface $host1_core $host1_if2 $ns duplex-link $host0_if0 $host1_if0 10Mb 45ms DropTail [[$ns link $host0_if0 $host1_if0] queue] set limit_ 50 $ns duplex-link $host0_if1 $host1_if1 10Mb 45ms DropTail [[$ns link $host0_if1 $host1_if1] queue] set limit_ 50 $ns duplex-link $host0_if2 $host1_if2 10Mb 45ms DropTail [[$ns link $host0_if2 $host1_if2] queue] set limit_ 50 set cmt_snd [new Agent/SCTP/CMT] $ns multihome-attach-agent $host0_core $cmt_snd $cmt_snd set initialSsthresh_ 16000 $cmt_snd set mtu_ 1500 $cmt_snd set dataChunkSize_ 1468 $cmt_snd set numOutStreams_ 1 $cmt_snd set useCmtReordering_ 1 $cmt_snd set useCmtCwnd_ 1 $cmt_snd set useCmtDelAck_ 1 $cmt_snd set eCmtRtxPolicy_ 2 ; #RTX-SSTHRESH if {$quiet == 0} { $cmt_snd set debugMask_ -1 $cmt_snd set debugFileIndex_ 0 set trace_ch [open trace.sctp w] $cmt_snd set trace_all_ 1 $cmt_snd trace cwnd_ $cmt_snd trace rto_ $cmt_snd trace errorCount_ $cmt_snd attach $trace_ch } set cmt_rcv [new Agent/SCTP/CMT] $ns multihome-attach-agent $host1_core $cmt_rcv # MTU of 1500 = 1452 data bytes $cmt_rcv set mtu_ 1500 $cmt_rcv set initialRwnd_ 65536 $cmt_rcv set useDelayedSacks_ 1 $cmt_rcv set useCmtDelAck_ 1 if {$quiet == 0} { $cmt_rcv set debugMask_ -1 $cmt_rcv set debugFileIndex_ 1 } $ns connect $cmt_snd $cmt_rcv set ftp0 [new Application/FTP] $ftp0 attach-agent $cmt_snd $cmt_snd set-primary-destination $host1_if0 $ns rtmodel-at 10.0 down $host0_if1 $host1_if1 } Test/sctp-cmt-pf-3paths-1path-fails instproc run {} { $self instvar ns ftp0 $ns at 0.0 "$ftp0 send 14520000" $ns at 100.0 "$self finish" $ns run } Test/sctp-cmt-pf-packet-loss-dest-conf instproc init {} { $self instvar ns testName ftp0 global quiet set testName cmt-pf-packet-loss-dest-conf $self next set host0_core [$ns node] set host0_if0 [$ns node] set host0_if1 [$ns node] $host0_core color Red $host0_if0 color Red $host0_if1 color Red $ns multihome-add-interface $host0_core $host0_if0 $ns multihome-add-interface $host0_core $host0_if1 set host1_core [$ns node] set host1_if0 [$ns node] set host1_if1 [$ns node] $host1_core color Blue $host1_if0 color Blue $host1_if1 color Blue $ns multihome-add-interface $host1_core $host1_if0 $ns multihome-add-interface $host1_core $host1_if1 $ns duplex-link $host0_if0 $host1_if0 10Mb 45ms DropTail [[$ns link $host0_if0 $host1_if0] queue] set limit_ 50 $ns duplex-link $host0_if1 $host1_if1 10Mb 45ms DropTail [[$ns link $host0_if1 $host1_if1] queue] set limit_ 50 set err [new ErrorModel/List] $err droplist {2 3} $ns lossmodel $err $host0_if0 $host1_if0 set cmt_snd [new Agent/SCTP/CMT] $ns multihome-attach-agent $host0_core $cmt_snd $cmt_snd set initialSsthresh_ 16000 $cmt_snd set mtu_ 1500 $cmt_snd set dataChunkSize_ 1468 $cmt_snd set numOutStreams_ 1 $cmt_snd set useCmtReordering_ 1 $cmt_snd set useCmtCwnd_ 1 $cmt_snd set useCmtDelAck_ 1 $cmt_snd set eCmtRtxPolicy_ 2 ; #RTX-SSTHRESH if {$quiet == 0} { $cmt_snd set debugMask_ -1 $cmt_snd set debugFileIndex_ 0 set trace_ch [open trace.sctp w] $cmt_snd set trace_all_ 1 $cmt_snd trace cwnd_ $cmt_snd trace rto_ $cmt_snd trace errorCount_ $cmt_snd attach $trace_ch } set cmt_rcv [new Agent/SCTP/CMT] $ns multihome-attach-agent $host1_core $cmt_rcv # MTU of 1500 = 1452 data bytes $cmt_rcv set mtu_ 1500 $cmt_rcv set initialRwnd_ 65536 $cmt_rcv set useDelayedSacks_ 1 $cmt_rcv set useCmtDelAck_ 1 if {$quiet == 0} { $cmt_rcv set debugMask_ -1 $cmt_rcv set debugFileIndex_ 1 } $ns connect $cmt_snd $cmt_rcv set ftp0 [new Application/FTP] $ftp0 attach-agent $cmt_snd $cmt_snd set-primary-destination $host1_if0 } Test/sctp-cmt-pf-packet-loss-dest-conf instproc run {} { $self instvar ns ftp0 $ns at 0.0 "$ftp0 send 1452000" $ns at 20.0 "$self finish" $ns run } Test/sctp-cmt-pf-Rtx-ssthresh instproc init {} { $self instvar ns testName ftp0 global quiet set testName cmt-pf-Rtx-ssthresh $self next set host0_core [$ns node] set host0_if0 [$ns node] set host0_if1 [$ns node] $host0_core color Red $host0_if0 color Red $host0_if1 color Red $ns multihome-add-interface $host0_core $host0_if0 $ns multihome-add-interface $host0_core $host0_if1 set host1_core [$ns node] set host1_if0 [$ns node] set host1_if1 [$ns node] $host1_core color Blue $host1_if0 color Blue $host1_if1 color Blue $ns multihome-add-interface $host1_core $host1_if0 $ns multihome-add-interface $host1_core $host1_if1 $ns duplex-link $host0_if0 $host1_if0 10Mb 45ms DropTail [[$ns link $host0_if0 $host1_if0] queue] set limit_ 50 $ns duplex-link $host0_if1 $host1_if1 10Mb 45ms DropTail [[$ns link $host0_if1 $host1_if1] queue] set limit_ 50 set err [new ErrorModel/List] $err droplist {23} $ns lossmodel $err $host0_if0 $host1_if0 set cmt_snd [new Agent/SCTP/CMT] $ns multihome-attach-agent $host0_core $cmt_snd $cmt_snd set initialSsthresh_ 16000 $cmt_snd set mtu_ 1500 $cmt_snd set dataChunkSize_ 1468 $cmt_snd set numOutStreams_ 1 $cmt_snd set useCmtReordering_ 1 $cmt_snd set useCmtCwnd_ 1 $cmt_snd set useCmtDelAck_ 1 $cmt_snd set eCmtRtxPolicy_ 2 ; #RTX-SSTHRESH if {$quiet == 0} { $cmt_snd set debugMask_ -1 $cmt_snd set debugFileIndex_ 0 set trace_ch [open trace.sctp w] $cmt_snd set trace_all_ 1 $cmt_snd trace cwnd_ $cmt_snd trace rto_ $cmt_snd trace errorCount_ $cmt_snd attach $trace_ch } set cmt_rcv [new Agent/SCTP/CMT] $ns multihome-attach-agent $host1_core $cmt_rcv # MTU of 1500 = 1452 data bytes $cmt_rcv set mtu_ 1500 $cmt_rcv set initialRwnd_ 65536 $cmt_rcv set useDelayedSacks_ 1 $cmt_rcv set useCmtDelAck_ 1 if {$quiet == 0} { $cmt_rcv set debugMask_ -1 $cmt_rcv set debugFileIndex_ 1 } $ns connect $cmt_snd $cmt_rcv set ftp0 [new Application/FTP] $ftp0 attach-agent $cmt_snd $cmt_snd set-primary-destination $host1_if0 } Test/sctp-cmt-pf-Rtx-ssthresh instproc run {} { $self instvar ns ftp0 $ns at 0.0 "$ftp0 send 1452000" $ns at 20.0 "$self finish" $ns run } Test/sctp-cmt-pf-Rtx-cwnd instproc init {} { $self instvar ns testName ftp0 global quiet set testName cmt-pf-Rtx-cwnd $self next set host0_core [$ns node] set host0_if0 [$ns node] set host0_if1 [$ns node] $host0_core color Red $host0_if0 color Red $host0_if1 color Red $ns multihome-add-interface $host0_core $host0_if0 $ns multihome-add-interface $host0_core $host0_if1 set host1_core [$ns node] set host1_if0 [$ns node] set host1_if1 [$ns node] $host1_core color Blue $host1_if0 color Blue $host1_if1 color Blue $ns multihome-add-interface $host1_core $host1_if0 $ns multihome-add-interface $host1_core $host1_if1 $ns duplex-link $host0_if0 $host1_if0 10Mb 45ms DropTail [[$ns link $host0_if0 $host1_if0] queue] set limit_ 50 $ns duplex-link $host0_if1 $host1_if1 10Mb 45ms DropTail [[$ns link $host0_if1 $host1_if1] queue] set limit_ 50 set err [new ErrorModel/List] $err droplist {23} $ns lossmodel $err $host0_if0 $host1_if0 set cmt_snd [new Agent/SCTP/CMT] $ns multihome-attach-agent $host0_core $cmt_snd $cmt_snd set initialSsthresh_ 16000 $cmt_snd set mtu_ 1500 $cmt_snd set dataChunkSize_ 1468 $cmt_snd set numOutStreams_ 1 $cmt_snd set useCmtReordering_ 1 $cmt_snd set useCmtCwnd_ 1 $cmt_snd set useCmtDelAck_ 1 $cmt_snd set eCmtRtxPolicy_ 4 ; #RTX-CWND if {$quiet == 0} { $cmt_snd set debugMask_ -1 $cmt_snd set debugFileIndex_ 0 set trace_ch [open trace.sctp w] $cmt_snd set trace_all_ 1 $cmt_snd trace cwnd_ $cmt_snd trace rto_ $cmt_snd trace errorCount_ $cmt_snd attach $trace_ch } set cmt_rcv [new Agent/SCTP/CMT] $ns multihome-attach-agent $host1_core $cmt_rcv # MTU of 1500 = 1452 data bytes $cmt_rcv set mtu_ 1500 $cmt_rcv set initialRwnd_ 65536 $cmt_rcv set useDelayedSacks_ 1 $cmt_rcv set useCmtDelAck_ 1 if {$quiet == 0} { $cmt_rcv set debugMask_ -1 $cmt_rcv set debugFileIndex_ 1 } $ns connect $cmt_snd $cmt_rcv set ftp0 [new Application/FTP] $ftp0 attach-agent $cmt_snd $cmt_snd set-primary-destination $host1_if0 } Test/sctp-cmt-pf-Rtx-cwnd instproc run {} { $self instvar ns ftp0 $ns at 0.0 "$ftp0 send 1452000" $ns at 20.0 "$self finish" $ns run } Test/sctp-cmt-pf-Timeout-pmr instproc init {} { $self instvar ns testName ftp0 global quiet set testName cmt-pf-Timeout-pmr $self next set host0_core [$ns node] set host0_if0 [$ns node] set host0_if1 [$ns node] $host0_core color Red $host0_if0 color Red $host0_if1 color Red $ns multihome-add-interface $host0_core $host0_if0 $ns multihome-add-interface $host0_core $host0_if1 set host1_core [$ns node] set host1_if0 [$ns node] set host1_if1 [$ns node] $host1_core color Blue $host1_if0 color Blue $host1_if1 color Blue $ns multihome-add-interface $host1_core $host1_if0 $ns multihome-add-interface $host1_core $host1_if1 $ns duplex-link $host0_if0 $host1_if0 10Mb 35ms DropTail [[$ns link $host0_if0 $host1_if0] queue] set limit_ 50 $ns duplex-link $host0_if1 $host1_if1 10Mb 45ms DropTail [[$ns link $host0_if1 $host1_if1] queue] set limit_ 50 set err [new ErrorModel/List] $err droplist {3 4 5 6 7 8 9 10} $ns lossmodel $err $host0_if0 $host1_if0 set cmt_snd [new Agent/SCTP/CMT] $ns multihome-attach-agent $host0_core $cmt_snd $cmt_snd set initialSsthresh_ 16000 $cmt_snd set mtu_ 1500 $cmt_snd set dataChunkSize_ 1468 $cmt_snd set numOutStreams_ 1 $cmt_snd set useCmtReordering_ 1 $cmt_snd set useCmtCwnd_ 1 $cmt_snd set useCmtDelAck_ 1 $cmt_snd set eCmtRtxPolicy_ 2 #RTX-SSTHRESH if {$quiet == 0} { $cmt_snd set debugMask_ -1 $cmt_snd set debugFileIndex_ 0 set trace_ch [open trace.sctp w] $cmt_snd set trace_all_ 1 $cmt_snd trace cwnd_ $cmt_snd trace rto_ $cmt_snd trace errorCount_ $cmt_snd attach $trace_ch } set cmt_rcv [new Agent/SCTP/CMT] $ns multihome-attach-agent $host1_core $cmt_rcv # MTU of 1500 = 1452 data bytes $cmt_rcv set mtu_ 1500 $cmt_rcv set initialRwnd_ 65536 $cmt_rcv set useDelayedSacks_ 1 $cmt_rcv set useCmtDelAck_ 1 if {$quiet == 0} { $cmt_rcv set debugMask_ -1 $cmt_rcv set debugFileIndex_ 1 } $ns connect $cmt_snd $cmt_rcv set ftp0 [new Application/FTP] $ftp0 attach-agent $cmt_snd $cmt_snd set-primary-destination $host1_if0 } Test/sctp-cmt-pf-Timeout-pmr instproc run {} { $self instvar ns ftp0 $ns at 0.0 "$ftp0 send 58080000" $ns at 100.0 "$self finish" $ns run } Test/sctp-non-renegable-ack-no-loss instproc init {} { $self instvar ns testName ftp0 global quiet set testName non-renegable-ack-no-loss $self next set n0 [$ns node] set n1 [$ns node] $ns duplex-link $n0 $n1 .5Mb 300ms DropTail $ns duplex-link-op $n0 $n1 orient right $ns queue-limit $n0 $n1 10000 set err [new ErrorModel/List] set sctp0 [new Agent/SCTP] $ns attach-agent $n0 $sctp0 $sctp0 set mtu_ 1500 $sctp0 set dataChunkSize_ 724 $sctp0 set numOutStreams_ 1 $sctp0 set useNonRenegSacks_ 1 #ENABLE NR-SACKS if {$quiet == 0} { $sctp0 set debugMask_ -1 $sctp0 set debugFileIndex_ 0 set trace_ch [open trace.sctp w] $sctp0 set trace_all_ 1 $sctp0 trace cwnd_ $sctp0 trace rto_ $sctp0 trace errorCount_ $sctp0 attach $trace_ch } set sctp1 [new Agent/SCTP] $ns attach-agent $n1 $sctp1 $sctp1 set mtu_ 1500 $sctp1 set initialRwnd_ 4096 $sctp1 set useDelayedSacks_ 0 $sctp1 set useNonRenegSacks_ 1 #ENABLE NR-SACKS if {$quiet == 0} { $sctp1 set debugMask_ -1 $sctp1 set debugFileIndex_ 1 } $ns connect $sctp0 $sctp1 set ftp0 [new Application/FTP] $ftp0 attach-agent $sctp0 } Test/sctp-non-renegable-ack-no-loss instproc run {} { $self instvar ns ftp0 $ns at 0.5 "$ftp0 start" $ns at 10.0 "$self finish" $ns run } Test/sctp-sack-with-loss instproc init {} { $self instvar ns testName ftp0 global quiet set testName sack-with-loss $self next set n0 [$ns node] set n1 [$ns node] $ns duplex-link $n0 $n1 .5Mb 300ms DropTail $ns duplex-link-op $n0 $n1 orient right $ns queue-limit $n0 $n1 10000 set err [new ErrorModel/List] $err droplist {12 15} $ns lossmodel $err $n0 $n1 set sctp0 [new Agent/SCTP] $ns attach-agent $n0 $sctp0 $sctp0 set mtu_ 1500 $sctp0 set dataChunkSize_ 724 $sctp0 set numOutStreams_ 10 $sctp0 set initialSwnd_ 4096 if {$quiet == 0} { $sctp0 set debugMask_ -1 $sctp0 set debugFileIndex_ 0 set trace_ch [open trace.sctp w] $sctp0 set trace_all_ 1 $sctp0 trace cwnd_ $sctp0 trace rto_ $sctp0 trace errorCount_ $sctp0 attach $trace_ch } set sctp1 [new Agent/SCTP] $ns attach-agent $n1 $sctp1 $sctp1 set mtu_ 1500 $sctp1 set initialRwnd_ 65536 $sctp1 set useDelayedSacks_ 0 if {$quiet == 0} { $sctp1 set debugMask_ -1 $sctp1 set debugFileIndex_ 1 } $ns connect $sctp0 $sctp1 set ftp0 [new Application/FTP] $ftp0 attach-agent $sctp0 } Test/sctp-sack-with-loss instproc run {} { $self instvar ns ftp0 $ns at 0.5 "$ftp0 start" $ns at 10.0 "$self finish" $ns run } Test/sctp-non-renegable-ack-with-loss instproc init {} { $self instvar ns testName ftp0 global quiet set testName non-renegable-ack-with-loss $self next set n0 [$ns node] set n1 [$ns node] $ns duplex-link $n0 $n1 .5Mb 300ms DropTail $ns duplex-link-op $n0 $n1 orient right $ns queue-limit $n0 $n1 10000 set err [new ErrorModel/List] $err droplist {12 17} $ns lossmodel $err $n0 $n1 set sctp0 [new Agent/SCTP] $ns attach-agent $n0 $sctp0 $sctp0 set mtu_ 1500 $sctp0 set dataChunkSize_ 724 $sctp0 set numOutStreams_ 10 $sctp0 set initialSwnd_ 4096 $sctp0 set useNonRenegSacks_ 1 #ENABLE NR-SACKS if {$quiet == 0} { $sctp0 set debugMask_ -1 $sctp0 set debugFileIndex_ 0 set trace_ch [open trace.sctp w] $sctp0 set trace_all_ 1 $sctp0 trace cwnd_ $sctp0 trace rto_ $sctp0 trace errorCount_ $sctp0 attach $trace_ch } set sctp1 [new Agent/SCTP] $ns attach-agent $n1 $sctp1 $sctp1 set mtu_ 1500 $sctp1 set initialRwnd_ 65536 $sctp1 set useDelayedSacks_ 0 $sctp1 set useNonRenegSacks_ 1 #ENABLE NR-SACKS if {$quiet == 0} { $sctp1 set debugMask_ -1 $sctp1 set debugFileIndex_ 1 } $ns connect $sctp0 $sctp1 set ftp0 [new Application/FTP] $ftp0 attach-agent $sctp0 } Test/sctp-non-renegable-ack-with-loss instproc run {} { $self instvar ns ftp0 $ns at 0.5 "$ftp0 start" $ns at 10.0 "$self finish" $ns run } Test/sctp-sack-with-loss-unordered instproc init {} { $self instvar ns testName ftp0 global quiet set testName sack-with-loss-unordered $self next set n0 [$ns node] set n1 [$ns node] $ns duplex-link $n0 $n1 .5Mb 300ms DropTail $ns duplex-link-op $n0 $n1 orient right $ns queue-limit $n0 $n1 10000 set err [new ErrorModel/List] $err droplist {34 45 46} $ns lossmodel $err $n0 $n1 set sctp0 [new Agent/SCTP] $ns attach-agent $n0 $sctp0 $sctp0 set mtu_ 1500 $sctp0 set dataChunkSize_ 1468 $sctp0 set numOutStreams_ 1 $sctp0 set unordered_ 1 $sctp0 set initialSwnd_ 16384 if {$quiet == 0} { $sctp0 set debugMask_ -1 $sctp0 set debugFileIndex_ 0 set trace_ch [open trace.sctp w] $sctp0 set trace_all_ 1 $sctp0 trace cwnd_ $sctp0 trace rto_ $sctp0 trace errorCount_ $sctp0 attach $trace_ch } set sctp1 [new Agent/SCTP] $ns attach-agent $n1 $sctp1 $sctp1 set mtu_ 1500 $sctp1 set initialRwnd_ 65536 $sctp1 set useDelayedSacks_ 0 if {$quiet == 0} { $sctp1 set debugMask_ -1 $sctp1 set debugFileIndex_ 1 } $ns connect $sctp0 $sctp1 set ftp0 [new Application/FTP] $ftp0 attach-agent $sctp0 } Test/sctp-sack-with-loss-unordered instproc run {} { $self instvar ns ftp0 $ns at 0.5 "$ftp0 start" $ns at 30.0 "$self finish" $ns run } Test/sctp-non-renegable-ack-with-loss-unordered instproc init {} { $self instvar ns testName ftp0 global quiet set testName non-renegable-ack-with-loss-unordered $self next set n0 [$ns node] set n1 [$ns node] $ns duplex-link $n0 $n1 .5Mb 300ms DropTail $ns duplex-link-op $n0 $n1 orient right $ns queue-limit $n0 $n1 10000 set err [new ErrorModel/List] $err droplist {34 47 56} $ns lossmodel $err $n0 $n1 set sctp0 [new Agent/SCTP] $ns attach-agent $n0 $sctp0 $sctp0 set mtu_ 1500 $sctp0 set dataChunkSize_ 1468 $sctp0 set numOutStreams_ 1 $sctp0 set unordered_ 1 $sctp0 set initialSwnd_ 16384 $sctp0 set useNonRenegSacks_ 1 #ENABLE NR-SACKS if {$quiet == 0} { $sctp0 set debugMask_ -1 $sctp0 set debugFileIndex_ 0 set trace_ch [open trace.sctp w] $sctp0 set trace_all_ 1 $sctp0 trace cwnd_ $sctp0 trace rto_ $sctp0 trace errorCount_ $sctp0 attach $trace_ch } set sctp1 [new Agent/SCTP] $ns attach-agent $n1 $sctp1 $sctp1 set mtu_ 1500 $sctp1 set initialRwnd_ 65536 $sctp1 set useDelayedSacks_ 0 $sctp1 set useNonRenegSacks_ 1 #ENABLE NR-SACKS if {$quiet == 0} { $sctp1 set debugMask_ -1 $sctp1 set debugFileIndex_ 1 } $ns connect $sctp0 $sctp1 set ftp0 [new Application/FTP] $ftp0 attach-agent $sctp0 } Test/sctp-non-renegable-ack-with-loss-unordered instproc run {} { $self instvar ns ftp0 $ns at 0.5 "$ftp0 start" $ns at 30.0 "$self finish" $ns run } Test/sctp-non-renegable-ack-with-loss-multistream instproc init {} { $self instvar ns testName ftp0 global quiet set testName non-renegable-ack-with-loss-multistream $self next set n0 [$ns node] set n1 [$ns node] $ns duplex-link $n0 $n1 .5Mb 300ms DropTail $ns duplex-link-op $n0 $n1 orient right $ns queue-limit $n0 $n1 10000 set err [new ErrorModel/List] $err droplist {34 46 54} $ns lossmodel $err $n0 $n1 set sctp0 [new Agent/SCTP] $ns attach-agent $n0 $sctp0 $sctp0 set mtu_ 1500 $sctp0 set dataChunkSize_ 1468 $sctp0 set numOutStreams_ 2 $sctp0 set initialSwnd_ 16384 $sctp0 set useNonRenegSacks_ 1 #ENABLE NR-SACKS if {$quiet == 0} { $sctp0 set debugMask_ -1 $sctp0 set debugFileIndex_ 0 set trace_ch [open trace.sctp w] $sctp0 set trace_all_ 1 $sctp0 trace cwnd_ $sctp0 trace rto_ $sctp0 trace errorCount_ $sctp0 attach $trace_ch } set sctp1 [new Agent/SCTP] $ns attach-agent $n1 $sctp1 $sctp1 set mtu_ 1500 $sctp1 set initialRwnd_ 65536 $sctp1 set useDelayedSacks_ 0 $sctp1 set useNonRenegSacks_ 1 #ENABLE NR-SACKS if {$quiet == 0} { $sctp1 set debugMask_ -1 $sctp1 set debugFileIndex_ 1 } $ns connect $sctp0 $sctp1 set ftp0 [new Application/FTP] $ftp0 attach-agent $sctp0 } Test/sctp-non-renegable-ack-with-loss-multistream instproc run {} { $self instvar ns ftp0 $ns at 0.5 "$ftp0 start" $ns at 30.0 "$self finish" $ns run } Test/sctp-cmt-2paths-1path-fails-with-non-renegable-acks instproc init {} { $self instvar ns testName ftp0 global quiet set testName cmt-2paths-1path-fails-with-non-renegable-acks $self next set host0_core [$ns node] set host0_if0 [$ns node] set host0_if1 [$ns node] $host0_core color Red $host0_if0 color Red $host0_if1 color Red $ns multihome-add-interface $host0_core $host0_if0 $ns multihome-add-interface $host0_core $host0_if1 set host1_core [$ns node] set host1_if0 [$ns node] set host1_if1 [$ns node] $host1_core color Blue $host1_if0 color Blue $host1_if1 color Blue $ns multihome-add-interface $host1_core $host1_if0 $ns multihome-add-interface $host1_core $host1_if1 $ns duplex-link $host0_if0 $host1_if0 10Mb 45ms DropTail [[$ns link $host0_if0 $host1_if0] queue] set limit_ 50 $ns duplex-link $host0_if1 $host1_if1 10Mb 45ms DropTail [[$ns link $host0_if1 $host1_if1] queue] set limit_ 50 set cmt_snd [new Agent/SCTP/CMT] $ns multihome-attach-agent $host0_core $cmt_snd $cmt_snd set initialSsthresh_ 16000 $cmt_snd set mtu_ 1500 $cmt_snd set dataChunkSize_ 1468 $cmt_snd set numOutStreams_ 1 $cmt_snd set useCmtReordering_ 1 $cmt_snd set useCmtCwnd_ 1 $cmt_snd set useCmtDelAck_ 1 $cmt_snd set eCmtRtxPolicy_ 2 ; #RTX-SSTHRESH $cmt_snd set useNonRenegSacks_ 1 #ENABLE NR-SACKS $cmt_snd set unordered_ 1 $cmt_snd set useCmtPF_ 0; # turn off CMT-PF if {$quiet == 0} { $cmt_snd set debugMask_ -1 $cmt_snd set debugFileIndex_ 0 set trace_ch [open trace.sctp w] $cmt_snd set trace_all_ 1 $cmt_snd trace cwnd_ $cmt_snd trace rto_ $cmt_snd trace errorCount_ $cmt_snd attach $trace_ch } set cmt_rcv [new Agent/SCTP/CMT] $ns multihome-attach-agent $host1_core $cmt_rcv # MTU of 1500 = 1452 data bytes $cmt_rcv set mtu_ 1500 $cmt_rcv set initialRwnd_ 65536 $cmt_rcv set useDelayedSacks_ 1 $cmt_rcv set useCmtDelAck_ 1 $cmt_rcv set useNonRenegSacks_ 1 #ENABLE NR-SACKS if {$quiet == 0} { $cmt_rcv set debugMask_ -1 $cmt_rcv set debugFileIndex_ 1 } $ns connect $cmt_snd $cmt_rcv set ftp0 [new Application/FTP] $ftp0 attach-agent $cmt_snd $cmt_snd set-primary-destination $host1_if0 $ns rtmodel-at 10.0 down $host0_if1 $host1_if1 } Test/sctp-cmt-2paths-1path-fails-with-non-renegable-acks instproc run {} { $self instvar ns ftp0 $ns at 0.0 "$ftp0 send 14520000" $ns at 120.0 "$self finish" $ns run } proc runtest {arg} { global quiet set quiet 0 set b [llength $arg] if {$b == 1} { set test $arg } elseif {$b == 2} { set test [lindex $arg 0] set q [lindex $arg 1] if { $q == "QUIET" } { set quiet 1 } else { usage } } else { usage } switch $test { sctp-2packetsTimeout - sctp-AMR-Exceeded - sctp-Rel1-Loss2 - sctp-burstAfterFastRtxRecovery - sctp-burstAfterFastRtxRecovery-2 - sctp-cwndFreeze - sctp-cwndFreeze-multistream - sctp-hugeRwnd - sctp-initRtx - sctp-multihome1-2 - sctp-multihome2-1 - sctp-multihome2-2AMR-Exceeded - sctp-multihome2-2Failover - sctp-multihome2-2Rtx1 - sctp-multihome2-2Rtx3 - sctp-multihome2-2Timeout - sctp-multihome2-2TimeoutRta0 - sctp-multihome2-2TimeoutRta2 - sctp-multihome2-R-2 - sctp-multihome3-3Timeout - sctp-multipleDropsSameWnd-1 - sctp-multipleDropsSameWnd-1-delayed - sctp-multipleDropsSameWnd-2 - sctp-multipleDropsSameWnd-3 - sctp-multipleDropsTwoWnds-1-delayed - sctp-multipleRtx - sctp-multipleRtx-early - sctp-newReno - sctp-noEarlyHBs - sctp-smallRwnd - sctp-smallSwnd - sctp-zeroRtx - sctp-zeroRtx-burstLoss - sctp-hbAfterRto-2packetsTimeout - sctp-hbAfterRto-multihome2-2Timeout - sctp-multipleFastRtx-2packetsTimeout - sctp-multipleFastRtx-multihome2-2Timeout - sctp-mfrHbAfterRto-Rta2-2FRsTimeout - sctp-timestamp-multihome2-2Rtx3 - sctp-timestamp-multihome2-2Timeout - sctp-packet-loss-dest-conf - sctp-cmt-2paths-64K - sctp-cmt-2paths-64K-withloss - sctp-cmt-3paths-64K - sctp-cmt-2paths-1path-fails - sctp-cmt-3paths-1path-fails - sctp-cmt-packet-loss-dest-conf - sctp-cmt-Rtx-ssthresh - sctp-cmt-Rtx-cwnd - sctp-cmt-Timeout-pmr - sctp-cmt-multihome2-2Timeout - sctp-cmt-pf-2paths-1path-fails - sctp-cmt-pf-3paths-1path-fails - sctp-cmt-pf-packet-loss-dest-conf - sctp-cmt-pf-Rtx-ssthresh - sctp-cmt-pf-Rtx-cwnd - sctp-cmt-pf-Timeout-pmr - sctp-non-renegable-ack-no-loss - sctp-sack-with-loss - sctp-non-renegable-ack-with-loss - sctp-sack-with-loss-unordered - sctp-non-renegable-ack-with-loss-unordered - sctp-non-renegable-ack-with-loss-multistream - sctp-cmt-2paths-1path-fails-with-non-renegable-acks { set t [new Test/$test] } default { puts stderr "Unknown test $test" exit 1 } } $t run } global argv arg0 runtest $argv