# Agent/TCP set tcpTick_ 0.1 # The default for tcpTick_ is being changed to reflect a changing reality. Agent/TCP set rfc2988_ false # The default for rfc2988_ is being changed to true. # FOR UPDATING GLOBAL DEFAULTS: Agent/TCP set precisionReduce_ false ; # default changed on 2006/1/24. Agent/TCP set rtxcur_init_ 6.0 ; # Default changed on 2006/01/21 Agent/TCP set updated_rttvar_ false ; # Variable added on 2006/1/21 Agent/TCP set minrto_ 1 # default changed on 10/14/2004. Agent/TCP set useHeaders_ false # The default is being changed to useHeaders_ true. Agent/TCP set windowInit_ 1 # The default is being changed to 2. Agent/TCP set singledup_ 0 # The default is being changed to 1 Agent/TCP set SetCWRonRetransmit_ true # Changing the default value. # # Copyright (c) 1999 Regents of the University of California. # All rights reserved. # # Redistribution and use in source and binary forms, with or without # modification, are permitted provided that the following conditions # are met: # 1. Redistributions of source code must retain the above copyright # notice, this list of conditions and the following disclaimer. # 2. Redistributions in binary form must reproduce the above copyright # notice, this list of conditions and the following disclaimer in the # documentation and/or other materials provided with the distribution. # 3. All advertising materials mentioning features or use of this software # must display the following acknowledgement: # This product includes software developed by the MASH Research # Group at the University of California Berkeley. # 4. Neither the name of the University nor of the Research Group may be # used to endorse or promote products derived from this software without # specific prior written permission. # # THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND # ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE # IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE # ARE DISCLAIMED. IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE # FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL # DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS # OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) # HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT # LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY # OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF # SUCH DAMAGE. # # @(#) $Header: /cvsroot/nsnam/ns-2/tcl/test/test-suite-satellite.tcl,v 1.12 2006/01/24 23:00:07 sallyfloyd Exp $ # # Contributed by Tom Henderson, UCB Daedalus Research Group, June 1999 # # This test suite is for validating the satellite extensions # # To run all tests: test-all-satellite # # To run individual tests: # ns test-suite-satellite.tcl mixed # ns test-suite-satellite.tcl mixed.legacy # ns test-suite-satellite.tcl repeater # ns test-suite-satellite.tcl aloha # ns test-suite-satellite.tcl aloha.collisions # ns test-suite-satellite.tcl wired # # # To view a list of available tests to run with this script: # ns test-suite-satellite.tcl # Agent/TCP set syn_ false Agent/TCP set delay_growth_ false # In preparation for changing the default values for syn_ and delay_growth_. # Some OTcl bound variables HandoffManager/Term set elevation_mask_ 8.2 HandoffManager/Term set term_handoff_int_ 10 HandoffManager set handoff_randomization_ "false" Mac/Sat/UnslottedAloha set mean_backoff_ 1s Mac/Sat/UnslottedAloha set rtx_limit_ 3 Mac/Sat/UnslottedAloha set send_timeout_ 270ms Class TestSuite TestSuite instproc init {} { $self instvar ns_ test_ topo_ node_ set ns_ [new Simulator] $ns_ rtproto Dummy global f set f [open temp.rands w] $ns_ trace-all $f } TestSuite instproc finish args { $self instvar ns_ $ns_ flush-trace exit 0 } proc usage {} { global argv0 puts stderr "usage: ns $argv0 " puts stderr "Valid tests are:\t[get-subclasses TestSuite Test/]" exit 1 } proc isProc? {cls prc} { if [catch "Object info subclass $cls/$prc" r] { global argv0 puts stderr "$argv0: no such $cls: $prc" usage } } proc get-subclasses {cls pfx} { set ret "" set l [string length $pfx] set c $cls while {[llength $c] > 0} { set t [lindex $c 0] set c [lrange $c 1 end] if [string match ${pfx}* $t] { lappend ret [string range $t $l end] } eval lappend c [$t info subclass] } set ret } TestSuite proc runTest {} { global argc argv switch $argc { 1 { set test $argv isProc? Test $test } 2 { set test [lindex $argv 0] isProc? Test $test set a [lindex $argv 1] } default { usage } } set t [new Test/$test] $t run } # Global configuration parameters global opt set opt(chan) Channel/Sat set opt(bw_up) 2Mb; # Uplink bandwidth set opt(bw_down) 2Mb; # Downlink bandwidth set opt(phy) Phy/Sat set opt(mac) Mac/Sat set opt(ifq) Queue/DropTail set opt(qlim) 50 set opt(ll) LL/Sat # Definition of test-suite tests # Simple bent-pipe (repeater) satellite # NOTE: This test is identical to sat-repeater.tcl in ~ns/tcl/ex Class Test/repeater -superclass TestSuite Test/repeater instproc init {} { $self instvar test_ set test_ repeater $self next } Test/repeater instproc run {} { $self instvar ns_ node_ global opt f set opt(wiredRouting) OFF # GEO satellite at 95 degrees longitude West $ns_ node-config -satNodeType geo-repeater \ -llType $opt(ll) \ -ifqType $opt(ifq) \ -ifqLen $opt(qlim) \ -macType $opt(mac) \ -phyType $opt(phy) \ -channelType $opt(chan) \ -downlinkBW $opt(bw_down) \ -wiredRouting $opt(wiredRouting) set n1 [$ns_ node] $n1 set-position -95 # Two terminals: one in NY and one in SF $ns_ node-config -satNodeType terminal set n2 [$ns_ node] $n2 set-position 40.9 -73.9; # NY set n3 [$ns_ node] $n3 set-position 37.8 -122.4; # SF # Add GSLs to geo satellites $n2 add-gsl geo $opt(ll) $opt(ifq) $opt(qlim) $opt(mac) $opt(bw_up) \ $opt(phy) [$n1 set downlink_] [$n1 set uplink_] $n3 add-gsl geo $opt(ll) $opt(ifq) $opt(qlim) $opt(mac) $opt(bw_up) \ $opt(phy) [$n1 set downlink_] [$n1 set uplink_] # Add an error model to the receiving terminal node set em_ [new ErrorModel] $em_ unit pkt $em_ set rate_ 0.02 $em_ ranvar [new RandomVariable/Uniform] $n3 interface-errormodel $em_ $ns_ trace-all-satlinks $f # Attach agents for CBR traffic generator set udp0 [new Agent/UDP] $ns_ attach-agent $n2 $udp0 set cbr0 [new Application/Traffic/CBR] $cbr0 attach-agent $udp0 $cbr0 set interval_ 6 set null0 [new Agent/Null] $ns_ attach-agent $n3 $null0 $ns_ connect $udp0 $null0 # Attach agents for FTP set tcp1 [$ns_ create-connection TCP $n2 TCPSink $n3 0] set ftp1 [$tcp1 attach-app FTP] $ns_ at 7.0 "$ftp1 produce 100" # We use centralized routing set satrouteobject_ [new SatRouteObject] $satrouteobject_ compute_routes $ns_ at 1.0 "$cbr0 start" $ns_ at 100.0 "$self finish" $ns_ run } # Testing a geo satellite and a plane of polar satellites # NOTE: This test is identical to sat-mixed.tcl in ~ns/tcl/ex Class Test/mixed -superclass TestSuite Test/mixed instproc init {} { $self instvar test_ set test_ mixed $self next } Test/mixed instproc run {} { $self instvar ns_ global opt f # Change some of the options set opt(bw_down) 1.5Mb set opt(bw_up) 1.5Mb set opt(bw_isl) 25Mb set opt(alt) 780 set opt(inc) 90 set opt(wiredRouting) OFF $ns_ node-config -satNodeType polar \ -llType $opt(ll) \ -ifqType $opt(ifq) \ -ifqLen $opt(qlim) \ -macType $opt(mac) \ -phyType $opt(phy) \ -channelType $opt(chan) \ -downlinkBW $opt(bw_down) \ -wiredRouting $opt(wiredRouting) set n0 [$ns_ node]; set n1 [$ns_ node]; set n2 [$ns_ node]; set n3 [$ns_ node]; set n4 [$ns_ node]; set n5 [$ns_ node]; set n6 [$ns_ node]; set n7 [$ns_ node]; set n8 [$ns_ node]; set n9 [$ns_ node]; set n10 [$ns_ node] set plane 1 $n0 set-position $opt(alt) $opt(inc) 0 0 $plane $n1 set-position $opt(alt) $opt(inc) 0 32.73 $plane $n2 set-position $opt(alt) $opt(inc) 0 65.45 $plane $n3 set-position $opt(alt) $opt(inc) 0 98.18 $plane $n4 set-position $opt(alt) $opt(inc) 0 130.91 $plane $n5 set-position $opt(alt) $opt(inc) 0 163.64 $plane $n6 set-position $opt(alt) $opt(inc) 0 196.36 $plane $n7 set-position $opt(alt) $opt(inc) 0 229.09 $plane $n8 set-position $opt(alt) $opt(inc) 0 261.82 $plane $n9 set-position $opt(alt) $opt(inc) 0 294.55 $plane $n10 set-position $opt(alt) $opt(inc) 0 327.27 $plane # By setting the next_ variable on polar sats; handoffs can be optimized # This step must follow all polar node creation $n0 set_next $n10; $n1 set_next $n0; $n2 set_next $n1; $n3 set_next $n2 $n4 set_next $n3; $n5 set_next $n4; $n6 set_next $n5; $n7 set_next $n6 $n8 set_next $n7; $n9 set_next $n8; $n10 set_next $n9 # GEO satellite: above North America $ns_ node-config -satNodeType geo set n11 [$ns_ node] $n11 set-position -100 # Terminals $ns_ node-config -satNodeType terminal set n100 [$ns_ node]; set n101 [$ns_ node] $n100 set-position 37.9 -122.3; # Berkeley $n101 set-position 42.3 -71.1; # Boston set n200 [$ns_ node]; set n201 [$ns_ node] $n200 set-position 0 10 $n201 set-position 0 -10 # Add any necessary ISLs or GSLs # GSLs to the geo satellite: $n100 add-gsl geo $opt(ll) $opt(ifq) $opt(qlim) $opt(mac) $opt(bw_up) \ $opt(phy) [$n11 set downlink_] [$n11 set uplink_] $n101 add-gsl geo $opt(ll) $opt(ifq) $opt(qlim) $opt(mac) $opt(bw_up) \ $opt(phy) [$n11 set downlink_] [$n11 set uplink_] # Attach n200 and n201 $n200 add-gsl polar $opt(ll) $opt(ifq) $opt(qlim) $opt(mac) $opt(bw_up) $opt(phy) [$n5 set downlink_] [$n5 set uplink_] $n201 add-gsl polar $opt(ll) $opt(ifq) $opt(qlim) $opt(mac) $opt(bw_up) $opt(phy) [$n5 set downlink_] [$n5 set uplink_] #ISL $ns_ add-isl intraplane $n0 $n1 $opt(bw_isl) $opt(ifq) $opt(qlim) $ns_ add-isl intraplane $n1 $n2 $opt(bw_isl) $opt(ifq) $opt(qlim) $ns_ add-isl intraplane $n2 $n3 $opt(bw_isl) $opt(ifq) $opt(qlim) $ns_ add-isl intraplane $n3 $n4 $opt(bw_isl) $opt(ifq) $opt(qlim) $ns_ add-isl intraplane $n4 $n5 $opt(bw_isl) $opt(ifq) $opt(qlim) $ns_ add-isl intraplane $n5 $n6 $opt(bw_isl) $opt(ifq) $opt(qlim) $ns_ add-isl intraplane $n6 $n7 $opt(bw_isl) $opt(ifq) $opt(qlim) $ns_ add-isl intraplane $n7 $n8 $opt(bw_isl) $opt(ifq) $opt(qlim) $ns_ add-isl intraplane $n8 $n9 $opt(bw_isl) $opt(ifq) $opt(qlim) $ns_ add-isl intraplane $n9 $n10 $opt(bw_isl) $opt(ifq) $opt(qlim) $ns_ add-isl intraplane $n10 $n0 $opt(bw_isl) $opt(ifq) $opt(qlim) # Trace all queues $ns_ trace-all-satlinks $f # Attach agents set udp0 [new Agent/UDP] $ns_ attach-agent $n100 $udp0 set cbr0 [new Application/Traffic/CBR] $cbr0 attach-agent $udp0 $cbr0 set interval_ 60.01 set udp1 [new Agent/UDP] $ns_ attach-agent $n200 $udp1 $udp1 set class_ 1 set cbr1 [new Application/Traffic/CBR] $cbr1 attach-agent $udp1 $cbr1 set interval_ 90.5 set null0 [new Agent/Null] $ns_ attach-agent $n101 $null0 set null1 [new Agent/Null] $ns_ attach-agent $n201 $null1 $ns_ connect $udp0 $null0 $ns_ connect $udp1 $null1 set satrouteobject_ [new SatRouteObject] $satrouteobject_ compute_routes $ns_ at 1.0 "$cbr0 start" $ns_ at 305.0 "$cbr1 start" $ns_ at 9000.0 "$self finish" $ns_ run } # Same as mixed, but with wired-satellite integration # NOTE: This test is identical to sat-wired.tcl in ~ns/tcl/ex Class Test/wired -superclass TestSuite Test/wired instproc init {} { $self instvar test_ set test_ wired $self next } Test/wired instproc run {} { $self instvar ns_ global opt f # Change some of the options set opt(bw_down) 1.5Mb set opt(bw_up) 1.5Mb set opt(bw_isl) 25Mb set opt(alt) 780 set opt(inc) 90 set opt(wiredRouting) ON $ns_ node-config -satNodeType polar \ -llType $opt(ll) \ -ifqType $opt(ifq) \ -ifqLen $opt(qlim) \ -macType $opt(mac) \ -phyType $opt(phy) \ -channelType $opt(chan) \ -downlinkBW $opt(bw_down) \ -wiredRouting $opt(wiredRouting) set n0 [$ns_ node]; set n1 [$ns_ node]; set n2 [$ns_ node]; set n3 [$ns_ node]; set n4 [$ns_ node]; set n5 [$ns_ node]; set n6 [$ns_ node]; set n7 [$ns_ node]; set n8 [$ns_ node]; set n9 [$ns_ node]; set n10 [$ns_ node] set plane 1 $n0 set-position $opt(alt) $opt(inc) 0 0 $plane $n1 set-position $opt(alt) $opt(inc) 0 32.73 $plane $n2 set-position $opt(alt) $opt(inc) 0 65.45 $plane $n3 set-position $opt(alt) $opt(inc) 0 98.18 $plane $n4 set-position $opt(alt) $opt(inc) 0 130.91 $plane $n5 set-position $opt(alt) $opt(inc) 0 163.64 $plane $n6 set-position $opt(alt) $opt(inc) 0 196.36 $plane $n7 set-position $opt(alt) $opt(inc) 0 229.09 $plane $n8 set-position $opt(alt) $opt(inc) 0 261.82 $plane $n9 set-position $opt(alt) $opt(inc) 0 294.55 $plane $n10 set-position $opt(alt) $opt(inc) 0 327.27 $plane # By setting the next_ variable on polar sats; handoffs can be optimized # This step must follow all polar node creation $n0 set_next $n10; $n1 set_next $n0; $n2 set_next $n1; $n3 set_next $n2 $n4 set_next $n3; $n5 set_next $n4; $n6 set_next $n5; $n7 set_next $n6 $n8 set_next $n7; $n9 set_next $n8; $n10 set_next $n9 # GEO satellite: above North America $ns_ node-config -satNodeType geo set n11 [$ns_ node] $n11 set-position -100 # Terminals $ns_ node-config -satNodeType terminal set n100 [$ns_ node]; set n101 [$ns_ node] $n100 set-position 37.9 -122.3; # Berkeley $n101 set-position 42.3 -71.1; # Boston set n200 [$ns_ node]; set n201 [$ns_ node] $n200 set-position 0 10 $n201 set-position 0 -10 # Add any necessary ISLs or GSLs # GSLs to the geo satellite: $n100 add-gsl geo $opt(ll) $opt(ifq) $opt(qlim) $opt(mac) $opt(bw_up) \ $opt(phy) [$n11 set downlink_] [$n11 set uplink_] $n101 add-gsl geo $opt(ll) $opt(ifq) $opt(qlim) $opt(mac) $opt(bw_up) \ $opt(phy) [$n11 set downlink_] [$n11 set uplink_] # Attach n200 and n201 $n200 add-gsl polar $opt(ll) $opt(ifq) $opt(qlim) $opt(mac) $opt(bw_up) $opt(phy) [$n5 set downlink_] [$n5 set uplink_] $n201 add-gsl polar $opt(ll) $opt(ifq) $opt(qlim) $opt(mac) $opt(bw_up) $opt(phy) [$n5 set downlink_] [$n5 set uplink_] #ISL $ns_ add-isl intraplane $n0 $n1 $opt(bw_isl) $opt(ifq) $opt(qlim) $ns_ add-isl intraplane $n1 $n2 $opt(bw_isl) $opt(ifq) $opt(qlim) $ns_ add-isl intraplane $n2 $n3 $opt(bw_isl) $opt(ifq) $opt(qlim) $ns_ add-isl intraplane $n3 $n4 $opt(bw_isl) $opt(ifq) $opt(qlim) $ns_ add-isl intraplane $n4 $n5 $opt(bw_isl) $opt(ifq) $opt(qlim) $ns_ add-isl intraplane $n5 $n6 $opt(bw_isl) $opt(ifq) $opt(qlim) $ns_ add-isl intraplane $n6 $n7 $opt(bw_isl) $opt(ifq) $opt(qlim) $ns_ add-isl intraplane $n7 $n8 $opt(bw_isl) $opt(ifq) $opt(qlim) $ns_ add-isl intraplane $n8 $n9 $opt(bw_isl) $opt(ifq) $opt(qlim) $ns_ add-isl intraplane $n9 $n10 $opt(bw_isl) $opt(ifq) $opt(qlim) $ns_ add-isl intraplane $n10 $n0 $opt(bw_isl) $opt(ifq) $opt(qlim) # Set up wired nodes # Connect $n300<->$n301<->$n302<->$n100<->$n11<->$n101<->$n303 # ^ ^ # |_______________| # # Packets from n303 to n300 should bypass n302 (node #18 in the trace) # (i.e., they should take the following path: 19,13,11,12,17,16) # $ns_ unset satNodeType_ set n300 [$ns_ node]; # node 16 in trace set n301 [$ns_ node]; # node 17 in trace set n302 [$ns_ node]; # node 18 in trace set n303 [$ns_ node]; # node 19 in trace $ns_ duplex-link $n300 $n301 5Mb 2ms DropTail; # 16 <-> 17 $ns_ duplex-link $n301 $n302 5Mb 2ms DropTail; # 17 <-> 18 $ns_ duplex-link $n302 $n100 5Mb 2ms DropTail; # 18 <-> 11 $ns_ duplex-link $n303 $n101 5Mb 2ms DropTail; # 19 <-> 13 $ns_ duplex-link $n301 $n100 5Mb 2ms DropTail; # 17 <-> 11 # Trace all queues $ns_ trace-all-satlinks $f # Attach agents set udp0 [new Agent/UDP] $ns_ attach-agent $n100 $udp0 set cbr0 [new Application/Traffic/CBR] $cbr0 attach-agent $udp0 $cbr0 set interval_ 60.01 set udp1 [new Agent/UDP] $ns_ attach-agent $n200 $udp1 $udp1 set class_ 1 set cbr1 [new Application/Traffic/CBR] $cbr1 attach-agent $udp1 $cbr1 set interval_ 90.5 set null0 [new Agent/Null] $ns_ attach-agent $n101 $null0 set null1 [new Agent/Null] $ns_ attach-agent $n201 $null1 $ns_ connect $udp0 $null0 $ns_ connect $udp1 $null1 # Set up connection between wired nodes set udp2 [new Agent/UDP] $ns_ attach-agent $n303 $udp2 set cbr2 [new Application/Traffic/CBR] $cbr2 attach-agent $udp2 $cbr2 set interval_ 300 set null2 [new Agent/Null] $ns_ attach-agent $n300 $null2 $ns_ connect $udp2 $null2 $ns_ at 10.0 "$cbr2 start" set satrouteobject_ [new SatRouteObject] $satrouteobject_ compute_routes $ns_ at 1.0 "$cbr0 start" $ns_ at 305.0 "$cbr1 start" $ns_ at 9000.0 "$self finish" $ns_ run } # Testing unslotted aloha # bent-pipe gka geo satellite and a plane of polar satellites # NOTE: This test is similar (fewer sources) to sat-aloha.tcl in ~ns/tcl/ex Class Test/aloha -superclass TestSuite Test/aloha instproc init {} { $self instvar test_ set test_ aloha $self next } Test/aloha instproc run {} { $self instvar ns_ global opt f Mac/Sat set trace_drops_ false Mac/Sat set trace_collisions_ false set opt(bw_up) 2Mb set opt(bw_down) 2Mb set opt(mac) Mac/Sat/UnslottedAloha set opt(wiredRouting) OFF $ns_ node-config -satNodeType geo-repeater \ -llType $opt(ll) \ -ifqType $opt(ifq) \ -ifqLen $opt(qlim) \ -macType $opt(mac) \ -phyType $opt(phy) \ -channelType $opt(chan) \ -downlinkBW $opt(bw_down) \ -wiredRouting $opt(wiredRouting) # GEO satellite at prime meridian set n1 [$ns_ node] $n1 set-position 0 # Place 30 nodes at 30 different locations $ns_ node-config -satNodeType terminal set num_nodes 30 for {set a 1} {$a <= $num_nodes} {incr a} { set n($a) [$ns_ node] $n($a) set-position [expr -15 + $a ] [expr 15 - $a ] $n($a) add-gsl geo $opt(ll) $opt(ifq) $opt(qlim) $opt(mac) \ $opt(bw_up) $opt(phy) [$n1 set downlink_] [$n1 set uplink_] } for {set a 1} {$a <= $num_nodes} {incr a} { set b [expr int($a + (0.5 * $num_nodes))] if {$b > 30} { incr b -30 } set udp($a) [new Agent/UDP] $ns_ attach-agent $n($a) $udp($a) set exp($a) [new Application/Traffic/Exponential] $exp($a) attach-agent $udp($a) $exp($a) set rate_ 3Kb set null($a) [new Agent/Null] $ns_ attach-agent $n($b) $null($a) $ns_ connect $udp($a) $null($a) $ns_ at 1.0 "$exp($a) start" } $ns_ trace-all-satlinks $f # We use centralized routing set satrouteobject_ [new SatRouteObject] $satrouteobject_ compute_routes $ns_ at 50.0 "$self finish" $ns_ run } Class Test/aloha.collisions -superclass TestSuite Test/aloha.collisions instproc init {} { $self instvar test_ set test_ aloha $self next } Test/aloha.collisions instproc run {} { $self instvar ns_ global opt f Mac/Sat set trace_drops_ true Mac/Sat set trace_collisions_ true set opt(bw_up) 2Mb set opt(bw_down) 2Mb set opt(mac) Mac/Sat/UnslottedAloha set opt(wiredRouting) OFF $ns_ node-config -satNodeType geo-repeater \ -llType $opt(ll) \ -ifqType $opt(ifq) \ -ifqLen $opt(qlim) \ -macType $opt(mac) \ -phyType $opt(phy) \ -channelType $opt(chan) \ -downlinkBW $opt(bw_down) \ -wiredRouting $opt(wiredRouting) # GEO satellite at prime meridian set n1 [$ns_ node] $n1 set-position 0 # Place 30 nodes at 30 different locations $ns_ node-config -satNodeType terminal set num_nodes 30 for {set a 1} {$a <= $num_nodes} {incr a} { set n($a) [$ns_ node] $n($a) set-position [expr -15 + $a ] [expr 15 - $a ] $n($a) add-gsl geo $opt(ll) $opt(ifq) $opt(qlim) $opt(mac) \ $opt(bw_up) $opt(phy) [$n1 set downlink_] [$n1 set uplink_] } for {set a 1} {$a <= $num_nodes} {incr a} { set b [expr int($a + (0.5 * $num_nodes))] if {$b > 30} { incr b -30 } set udp($a) [new Agent/UDP] $ns_ attach-agent $n($a) $udp($a) set exp($a) [new Application/Traffic/Exponential] $exp($a) attach-agent $udp($a) $exp($a) set rate_ 3Kb set null($a) [new Agent/Null] $ns_ attach-agent $n($b) $null($a) $ns_ connect $udp($a) $null($a) $ns_ at 1.0 "$exp($a) start" } $ns_ trace-all-satlinks $f # We use centralized routing set satrouteobject_ [new SatRouteObject] $satrouteobject_ compute_routes $ns_ at 50.0 "$self finish" $ns_ run } # Backward compatibility syntax (legacy code) for "mixed" Class Test/mixed.legacy -superclass TestSuite Test/mixed.legacy instproc init {} { $self instvar test_ set test_ mixed.legacy $self next } Test/mixed.legacy instproc run {} { $self instvar ns_ global opt f # Change some of the options set opt(bw_down) 1.5Mb set opt(bw_up) 1.5Mb set opt(bw_isl) 25Mb set opt(mac) Mac/Sat set opt(alt) 780 set opt(inc) 90 set linkargs "$opt(ll) $opt(ifq) $opt(qlim) $opt(mac) $opt(bw_down) $opt(phy)" set alt $opt(alt) set inc $opt(inc) set chan $opt(chan) set plane 1 set n0 [$ns_ satnode-polar $alt $inc 0 0 $plane $linkargs $chan] set n1 [$ns_ satnode-polar $alt $inc 0 32.73 $plane $linkargs $chan] set n2 [$ns_ satnode-polar $alt $inc 0 65.45 $plane $linkargs $chan] set n3 [$ns_ satnode-polar $alt $inc 0 98.18 $plane $linkargs $chan] set n4 [$ns_ satnode-polar $alt $inc 0 130.91 $plane $linkargs $chan] set n5 [$ns_ satnode-polar $alt $inc 0 163.64 $plane $linkargs $chan] set n6 [$ns_ satnode-polar $alt $inc 0 196.36 $plane $linkargs $chan] set n7 [$ns_ satnode-polar $alt $inc 0 229.09 $plane $linkargs $chan] set n8 [$ns_ satnode-polar $alt $inc 0 261.82 $plane $linkargs $chan] set n9 [$ns_ satnode-polar $alt $inc 0 294.55 $plane $linkargs $chan] set n10 [$ns_ satnode-polar $alt $inc 0 327.27 $plane $linkargs $chan] # By setting the next_ variable on polar sats; handoffs can be optimized # This step must follow all polar node creation $n0 set_next $n10; $n1 set_next $n0; $n2 set_next $n1; $n3 set_next $n2 $n4 set_next $n3; $n5 set_next $n4; $n6 set_next $n5; $n7 set_next $n6 $n8 set_next $n7; $n9 set_next $n8; $n10 set_next $n9 # GEO satellite: above North America set n11 [$ns_ satnode-geo -100 $linkargs $opt(chan)] # Terminals set n100 [$ns_ satnode-terminal 37.9 -122.3]; # Berkeley set n101 [$ns_ satnode-terminal 42.3 -71.1]; # Boston set n200 [$ns_ satnode-terminal 0 10] set n201 [$ns_ satnode-terminal 0 -10] # Add any necessary ISLs or GSLs # GSLs to the geo satellite: $n100 add-gsl geo $opt(ll) $opt(ifq) $opt(qlim) $opt(mac) $opt(bw_up) \ $opt(phy) [$n11 set downlink_] [$n11 set uplink_] $n101 add-gsl geo $opt(ll) $opt(ifq) $opt(qlim) $opt(mac) $opt(bw_up) \ $opt(phy) [$n11 set downlink_] [$n11 set uplink_] # Attach n200 and n201 $n200 add-gsl polar $opt(ll) $opt(ifq) $opt(qlim) $opt(mac) $opt(bw_up) $opt(phy) [$n5 set downlink_] [$n5 set uplink_] $n201 add-gsl polar $opt(ll) $opt(ifq) $opt(qlim) $opt(mac) $opt(bw_up) $opt(phy) [$n5 set downlink_] [$n5 set uplink_] #ISL $ns_ add-isl intraplane $n0 $n1 $opt(bw_isl) $opt(ifq) $opt(qlim) $ns_ add-isl intraplane $n1 $n2 $opt(bw_isl) $opt(ifq) $opt(qlim) $ns_ add-isl intraplane $n2 $n3 $opt(bw_isl) $opt(ifq) $opt(qlim) $ns_ add-isl intraplane $n3 $n4 $opt(bw_isl) $opt(ifq) $opt(qlim) $ns_ add-isl intraplane $n4 $n5 $opt(bw_isl) $opt(ifq) $opt(qlim) $ns_ add-isl intraplane $n5 $n6 $opt(bw_isl) $opt(ifq) $opt(qlim) $ns_ add-isl intraplane $n6 $n7 $opt(bw_isl) $opt(ifq) $opt(qlim) $ns_ add-isl intraplane $n7 $n8 $opt(bw_isl) $opt(ifq) $opt(qlim) $ns_ add-isl intraplane $n8 $n9 $opt(bw_isl) $opt(ifq) $opt(qlim) $ns_ add-isl intraplane $n9 $n10 $opt(bw_isl) $opt(ifq) $opt(qlim) $ns_ add-isl intraplane $n10 $n0 $opt(bw_isl) $opt(ifq) $opt(qlim) # Trace all queues $ns_ trace-all-satlinks $f # Attach agents set udp0 [new Agent/UDP] $ns_ attach-agent $n100 $udp0 set cbr0 [new Application/Traffic/CBR] $cbr0 attach-agent $udp0 $cbr0 set interval_ 60.01 set udp1 [new Agent/UDP] $ns_ attach-agent $n200 $udp1 $udp1 set class_ 1 set cbr1 [new Application/Traffic/CBR] $cbr1 attach-agent $udp1 $cbr1 set interval_ 90.5 set null0 [new Agent/Null] $ns_ attach-agent $n101 $null0 set null1 [new Agent/Null] $ns_ attach-agent $n201 $null1 $ns_ connect $udp0 $null0 $ns_ connect $udp1 $null1 set satrouteobject_ [new SatRouteObject] $satrouteobject_ compute_routes $ns_ at 1.0 "$cbr0 start" $ns_ at 305.0 "$cbr1 start" $ns_ at 9000.0 "$self finish" $ns_ run } TestSuite runTest