#!/bin/sh # # Network Performance Meter # Copyright (C) 2009-2024 by Thomas Dreibholz # # This program is free software: you can redistribute it and/or modify # it under the terms of the GNU General Public License as published by # the Free Software Foundation, either version 3 of the License, or # (at your option) any later version. # # This program is distributed in the hope that it will be useful, # but WITHOUT ANY WARRANTY; without even the implied warranty of # MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the # GNU General Public License for more details. # # You should have received a copy of the GNU General Public License # along with this program. If not, see . # # Contact: thomas.dreibholz@gmail.com # if [ $# -lt 1 ] ; then echo >&2 "Usage: $0 id source destination bandwidth_kbit_per_s delay_ms loss_rate error_rate [-interfaces name] [-bidirectional] [-queueType type] [-frameCapacity packets] [-redMinTh threshold] [-redMaxTh threshold] [-redMaxP probability] [-redWq wq]" exit 1 fi # ====== Get parameters ===================================================== ID="$1" if [ "$2" != "" ] ; then NETWORK_SRC="$2" else NETWORK_SRC="0.0.0.0/0" fi if [ "$3" != "" ] ; then NETWORK_DST="$3" else NETWORK_DST="0.0.0.0/0" fi INTERFACES="" QUEUE_TYPE=red FRAME_CAPACITY=80 RED_MINTH=20 RED_MAXTH=80 RED_MAXP=0.02 RED_WQ=0.002 BANDWIDTH="" DELAY="" LOSS="" ERROR="" addRule=0 bidirectionalQoS=0 if [ $# -ge 4 ] ; then if [ $# -lt 8 ] ; then echo >&2 "ERROR: Too few arguments!" exit 1 fi if [ "$4" != "" ] ; then BANDWIDTH="$4" addRule=1 fi if [ "$5" != "" ] ; then DELAY="$5" addRule=1 fi if [ "$6" != "" ] ; then LOSS="$6" addRule=1 fi if [ "$7" != "" ] ; then ERROR="$7" addRule=1 fi shift ; shift ; shift ; shift ; shift ; shift ; shift while [ "$1" != "" ] ; do if [ "$1" = "-bidirectional" ] ; then bidirectionalQoS=1 elif [ "$1" = "-queueType" ] ; then QUEUE_TYPE="$2" shift elif [ "$1" = "-redMinTh" ] ; then RED_MINTH="$2" shift elif [ "$1" = "-redMaxTh" ] ; then RED_MAXTH="$2" shift elif [ "$1" = "-redMaxP" ] ; then RED_MAXP="$2" shift elif [ "$1" = "-redWq" ] ; then RED_WQ="$2" shift elif [ "$1" = "-frameCapacity" ] ; then FRAME_CAPACITY="$2" shift elif [ "$1" = "-interfaces" ] ; then INTERFACES="$2" shift else echo >&2 "ERROR: Invalid option $1!" exit 1 fi shift done fi if [ $addRule -eq 0 ] ; then echo "REM" fi # ====== Linux QoS setup ==================================================== success=1 SYSTEM=`uname` if [ "$SYSTEM" = "Linux" ] ; then if [ "$INTERFACES" = "" ] ; then # Use *all* interfaces INTERFACES=`eval "ifconfig -a" 2>/dev/null | sed -ne 's|^\('$cur'[^[:space:][:punct:]]\{1,\}\).*$|\1|p'` fi for iface in $INTERFACES ; do tc qdisc del dev $iface root 2>/dev/null # Ohne ID-Angabe wird Root mit jeder ID entfernt! done if [ $addRule -eq 1 ] ; then bandwidthParameter="" weightParameter="" delayParameter="" lossParameter="" errorParameter="" if [ "$BANDWIDTH" != "" ] ; then weightParameter="" bandwidthParameter="rate ${BANDWIDTH}Kbit" fi if [ "$DELAY" != "" ] ; then delayParameter="delay ${DELAY}ms" fi if [ "$LOSS" != "" ] ; then lossParameter="loss `echo "${LOSS}*100.0" | bc`%" fi if [ "$ERROR" != "" ] ; then errorParameter="corrupt `echo "${ERROR}*100.0" | bc`%" fi for iface in $INTERFACES ; do tc qdisc add dev $iface root handle 9$ID:0 cbq bandwidth 100Mbit avpkt 1500 cell 8 || success=0 tc class add dev $iface parent 9$ID:0 classid 9$ID:3 cbq \ bandwidth 100Mbit $bandwidthParameter $weightParameter \ prio 8 allot 1514 cell 8 maxburst 20 avpkt 1500 bounded || success=0 if [ "$QUEUE_TYPE" = "fifo" ] ; then tc qdisc add dev $iface handle 8$ID:0 parent 9$ID:3 pfifo limit $FRAME_CAPACITY elif [ "$QUEUE_TYPE" = "red" ] ; then # tc qdisc add dev $iface parent 8$ID:0 red limit $FRAME_CAPACITY avpkt 1500 echo "RED configuration: IMPLEMENT ME!" exit 1 else echo >&2 "ERROR: Bad queue type?!" exit 1 fi tc filter add dev $iface protocol ip parent 9$ID:0 \ u32 match ip src $NETWORK_SRC match ip dst $NETWORK_DST flowid 9$ID:3 || success=0 if [ $bidirectionalQoS -eq 1 ] ; then tc filter add dev $iface protocol ip parent 9$ID:0 \ u32 match ip src $NETWORK_DST match ip dst $NETWORK_SRC flowid 9$ID:3 || success=0 fi # tc -s qdisc ls dev $iface || success=0 if [ $success -ne 1 ] ; then echo >&2 "ERROR: Failed to configure QDiscs on interface $iface!" fi done fi # ====== FreeBSD QoS setup ================================================== elif [ "$SYSTEM" = "FreeBSD" ] ; then ID2=$(($ID+1)) /sbin/ipfw $ID delete pipe $ID 2>/dev/null # Delete old configuration /sbin/ipfw $ID2 delete pipe $ID2 2>/dev/null # Delete old configuration if [ $addRule -eq 1 ] ; then if [ "$BANDWIDTH" != "" ] ; then BANDWIDTH="bw ${BANDWIDTH}Kbit/s" fi if [ "$DELAY" != "" ] ; then DELAY="delay ${DELAY}ms" fi if [ "$LOSS" != "" ] ; then LOSS="plr ${LOSS}" fi if [ "$ERROR" != "" ] ; then if [ ! $ERROR -eq 0 ] ; then ERROR="ber ${ERROR}" else ERROR="" fi fi queueParameters= if [ "$QUEUE_TYPE" = "red" ] ; then queueParameters="queue $FRAME_CAPACITY red $RED_WQ/$RED_MINTH/$RED_MAXTH/$RED_MAXP" elif [ "$QUEUE_TYPE" = "fifo" ] ; then queueParameters="queue $FRAME_CAPACITY" else echo >&2 "ERROR: Invalid queue type $QUEUE_TYPE!" exit 1 fi /sbin/ipfw add $ID pipe $ID out src-ip $NETWORK_SRC dst-ip $NETWORK_DST || success=0 /sbin/ipfw pipe $ID config $BANDWIDTH $DELAY $LOSS $ERROR $queueParameters || success=0 if [ $bidirectionalQoS -eq 1 ] ; then /sbin/ipfw add $ID2 pipe $ID2 out src-ip $NETWORK_DST dst-ip $NETWORK_SRC || success=0 /sbin/ipfw pipe $ID2 config $BANDWIDTH $DELAY $LOSS $ERROR $queueParameters || success=0 fi fi # ====== Other systems ====================================================== else echo >&2 "ERROR: Unsupported system $SYSTEM!" exit 1 fi # ====== Check whether QoS configuration has been successful ================ if [ $success -ne 1 ] ; then echo >&2 "ERROR: setqos has failed to configure QoS settings!" echo >&2 "Command on `hostname`: $0 $@" exit 1 fi