# # Validate that a managed connection with two groups is able to do failover # between both groups and is members # # Test: # 0. The test requires 5 servers: # server1: group A primary # server2: group A secondary # server3: group B primary # server4: group B secondary # server5: single server # 1. Deploy a 2 members group A in single primary mode. # 2. Deploy a 2 members group B in single primary mode. # 3. Configure replica to manage the asynchronous connection # to groups A and B. # 4. Create and start the managed channel. # 5. Stop primary from group A (server1) and IO thread shall connect to # new primary server2 # 6. Stop new elected primary from group A (server2) and IO thread # should connect to primary from group B (server3) # 7. Stop primary from group B (server3) and IO thread should connect to # new elected primary from group B (server4) # 8. Stop primary from group B (server4) and IO thread should stop # 9. Assert Server2 and Server4 last members of the groups are on # replication_connection_status table # 10. Clean up. # --source include/big_test.inc --source include/have_group_replication_plugin.inc --let $rpl_skip_group_replication_start= 1 --let $rpl_server_count= 5 --source include/group_replication.inc #check which stack are we using --let $have_xcom_stack= `SELECT @@group_replication_communication_stack LIKE 'XCOM'` --echo --echo # 1. Deploy a 2 members group A in single primary mode. --echo --let $rpl_connection_name= server1 --source include/rpl_connection.inc --let $server1_uuid= `SELECT @@server_uuid` --let $group_replication_group_name= aaaaaaaa-aaaa-aaaa-aaaa-aaaaaaaaaaaa --let $group_a= $group_replication_group_name --disable_query_log if ($have_xcom_stack){ --eval SET GLOBAL group_replication_group_seeds= "localhost:$SERVER_GR_PORT_1,localhost:$SERVER_GR_PORT_2" } if (!$have_xcom_stack){ --eval SET GLOBAL group_replication_group_seeds= "localhost:$SERVER_MYPORT_1,localhost:$SERVER_MYPORT_2" } --enable_query_log --source include/start_and_bootstrap_group_replication.inc --let $rpl_connection_name= server2 --source include/rpl_connection.inc --let $server2_uuid= `SELECT @@server_uuid` --disable_query_log if ($have_xcom_stack){ --eval SET GLOBAL group_replication_group_seeds= "localhost:$SERVER_GR_PORT_1,localhost:$SERVER_GR_PORT_2" } if (!$have_xcom_stack){ --eval SET GLOBAL group_replication_group_seeds= "localhost:$SERVER_MYPORT_1,localhost:$SERVER_MYPORT_2" } --enable_query_log --source include/start_group_replication.inc --echo --echo # 2. Deploy a 2 members group B in single primary mode. --echo --let $rpl_connection_name= server3 --source include/rpl_connection.inc --let $server3_uuid= `SELECT @@server_uuid` --let $group_replication_group_name= bbbbbbbb-bbbb-bbbb-bbbb-bbbbbbbbbbbb --let $group_b= $group_replication_group_name --disable_query_log if ($have_xcom_stack){ --eval SET GLOBAL group_replication_group_seeds= "localhost:$SERVER_GR_PORT_3,localhost:$SERVER_GR_PORT_4" } if (!$have_xcom_stack){ --eval SET GLOBAL group_replication_group_seeds= "localhost:$SERVER_MYPORT_3,localhost:$SERVER_MYPORT_4" } --enable_query_log --source include/start_and_bootstrap_group_replication.inc --let $rpl_connection_name= server4 --source include/rpl_connection.inc --let $server4_uuid= `SELECT @@server_uuid` --disable_query_log if ($have_xcom_stack){ --eval SET GLOBAL group_replication_group_seeds= "localhost:$SERVER_GR_PORT_3,localhost:$SERVER_GR_PORT_4" } if (!$have_xcom_stack){ --eval SET GLOBAL group_replication_group_seeds= "localhost:$SERVER_MYPORT_3,localhost:$SERVER_MYPORT_4" } --enable_query_log --source include/start_group_replication.inc --echo --echo # 3. Configure replica to manage the asynchronous connection --echo # to groups A and B. --echo --let $rpl_connection_name= server5 --source include/rpl_connection.inc --replace_result $SERVER_MYPORT_1 SERVER_MYPORT_1 $group_a GROUP_A --eval SELECT asynchronous_connection_failover_add_managed('ch1', 'GroupReplication', '$group_a', '127.0.0.1', $SERVER_MYPORT_1, '', 90, 70); --replace_result $SERVER_MYPORT_3 SERVER_MYPORT_3 $group_b GROUP_B --eval SELECT asynchronous_connection_failover_add_managed('ch1', 'GroupReplication', '$group_b', '127.0.0.1', $SERVER_MYPORT_3, '', 85, 65); --let $assert_text= 'There is one row in performance_schema.replication_asynchronous_connection_failover for server1' --let $assert_cond= [SELECT COUNT(*) count FROM performance_schema.replication_asynchronous_connection_failover WHERE port=$SERVER_MYPORT_1, count, 1] = 1 --source include/assert.inc --let $assert_text= 'There is one row in performance_schema.replication_asynchronous_connection_failover for server3' --let $assert_cond= [SELECT COUNT(*) count FROM performance_schema.replication_asynchronous_connection_failover WHERE port=$SERVER_MYPORT_3, count, 1] = 1 --source include/assert.inc --let $assert_text= 'There is one row in performance_schema.replication_asynchronous_connection_failover_managed for group A' --let $assert_cond= [SELECT COUNT(*) count FROM performance_schema.replication_asynchronous_connection_failover_managed WHERE managed_name="$group_a", count, 1] = 1 --source include/assert.inc --let $assert_text= 'There is one row in performance_schema.replication_asynchronous_connection_failover_managed for group B' --let $assert_cond= [SELECT COUNT(*) count FROM performance_schema.replication_asynchronous_connection_failover_managed WHERE managed_name="$group_b", count, 1] = 1 --source include/assert.inc --echo --echo # 4. Create and start the managed channel. --echo --let $rpl_connection_name= server5 --source include/rpl_connection.inc --replace_result $SERVER_MYPORT_1 SERVER_1_PORT --eval CHANGE REPLICATION SOURCE TO SOURCE_HOST='127.0.0.1', SOURCE_USER='root', SOURCE_AUTO_POSITION=1, SOURCE_CONNECTION_AUTO_FAILOVER=1, SOURCE_PORT=$SERVER_MYPORT_1, SOURCE_CONNECT_RETRY=1, SOURCE_RETRY_COUNT=1 FOR CHANNEL 'ch1' --let $rpl_channel_name='ch1' --source include/start_slave.inc --let $rpl_channel_name= --let $assert_text= Verify channel ch1 IO_THREAD is ON and connected to server1 --let $assert_cond= "[SELECT SERVICE_STATE FROM performance_schema.replication_connection_status WHERE channel_name=\'ch1\' AND source_uuid=\'$server1_uuid\', SERVICE_STATE, 1]" = "ON" --source include/assert.inc --let $wait_condition= SELECT COUNT(*)=4 FROM performance_schema.replication_asynchronous_connection_failover --source include/wait_condition.inc --echo --echo # 5. Stop primary from group A (server1) and IO thread shall connect to --echo # new primary server2 --echo --let $rpl_connection_name= server1 --source include/rpl_connection.inc --source include/stop_group_replication.inc --let $rpl_connection_name= server5 --source include/rpl_connection.inc --let $wait_condition= SELECT COUNT(*)=3 FROM performance_schema.replication_asynchronous_connection_failover --source include/wait_condition.inc --let $wait_condition= SELECT COUNT(*)=1 FROM performance_schema.replication_connection_status WHERE channel_name='ch1' AND source_uuid='$server2_uuid'; --source include/wait_condition.inc --echo --echo # 6. Stop new elected primary from group A (server2) and IO thread --echo # should connect to primary from group B (server3) --echo --let $rpl_connection_name= server2 --source include/rpl_connection.inc --source include/stop_group_replication.inc --let $rpl_connection_name= server5 --source include/rpl_connection.inc --let $wait_condition= SELECT COUNT(*)=3 FROM performance_schema.replication_asynchronous_connection_failover --source include/wait_condition.inc --let $wait_condition= SELECT COUNT(*)=1 FROM performance_schema.replication_connection_status WHERE channel_name='ch1' AND source_uuid='$server3_uuid'; --source include/wait_condition.inc --echo --echo # 7. Stop primary from group B (server3) and IO thread should connect to --echo # new elected primary from group B (server4) --echo --let $rpl_connection_name= server3 --source include/rpl_connection.inc --source include/stop_group_replication.inc --let $rpl_connection_name= server5 --source include/rpl_connection.inc --let $wait_condition= SELECT COUNT(*)=2 FROM performance_schema.replication_asynchronous_connection_failover --source include/wait_condition.inc --let $wait_condition= SELECT COUNT(*)=1 FROM performance_schema.replication_connection_status WHERE channel_name='ch1' AND source_uuid='$server4_uuid'; --source include/wait_condition.inc --echo --echo # 8. Stop primary from group B (server4) and IO thread should stop --let $rpl_connection_name= server4 --source include/rpl_connection.inc --source include/stop_group_replication.inc --let $rpl_connection_name= server5 --source include/rpl_connection.inc --let $wait_condition= SELECT COUNT(*)=2 FROM performance_schema.replication_asynchronous_connection_failover --source include/wait_condition.inc --let $wait_condition= SELECT COUNT(*)=0 FROM performance_schema.replication_connection_status WHERE channel_name='ch1' AND service_state='OFF'; --source include/wait_condition.inc --echo --echo # 9. Assert Server2 and Server4 last members of the groups are on --echo # replication_connection_status table --echo --let $assert_text= 'Last member from group A Server2 is one row in performance_schema.replication_asynchronous_connection_failover' --let $assert_cond= [SELECT COUNT(*) count FROM performance_schema.replication_asynchronous_connection_failover WHERE port=$SERVER_MYPORT_2, count, 1] = 1 --source include/assert.inc --let $assert_text= 'Last member from group B Server4 is one row in performance_schema.replication_asynchronous_connection_failover' --let $assert_cond= [SELECT COUNT(*) count FROM performance_schema.replication_asynchronous_connection_failover WHERE port=$SERVER_MYPORT_4, count, 1] = 1 --source include/assert.inc --echo --echo # 10. Clean up. --echo --let $rpl_connection_name= server5 --source include/rpl_connection.inc SET SESSION sql_log_bin = 0; call mtr.add_suppression("The source .* for channel 'ch1' has joined the group .*, and so added its entry into replication_asynchronous_connection_failover table."); call mtr.add_suppression("The Monitor IO thread detected that the source .* does not belong to the group majority, thence the channel .* will try to connect to another source."); call mtr.add_suppression("The source .* for channel 'ch1' has left the group .*, and so removed its entry from replication_asynchronous_connection_failover table."); call mtr.add_suppression("The group .* for the channel .* has been removed, and so removed its entry from replication_asynchronous_connection_failover_managed and all the group members from replication_asynchronous_connection_failover table."); call mtr.add_suppression("The group .* for the channel .* has been added, and so added its entry in replication_asynchronous_connection_failover_managed and source to replication_asynchronous_connection_failover table."); call mtr.add_suppression("The IO thread detected that the source .* does not belong to the group majority, thence the channel .* will try to connect to another source."); call mtr.add_suppression("The Monitor IO thread failed to detect if the source belongs to the group majority on the source .* for channel 'ch1'."); SET SESSION sql_log_bin = 1; --let $rpl_channel_name='ch1' --source include/stop_slave.inc --let $rpl_reset_slave_all= 1 --let $rpl_multi_source= 1 --source include/rpl_reset_slave.inc --let $rpl_channel_name= --let $rpl_reset_slave_all= --let $rpl_multi_source= --replace_result $group_a GROUP_A --eval SELECT asynchronous_connection_failover_delete_managed('ch1', '$group_a') --replace_result $group_b GROUP_B --eval SELECT asynchronous_connection_failover_delete_managed('ch1', '$group_b') --source include/group_replication_end.inc