# # MP3Roaster example configuration file # # $Id: mp3roasterrc,v 1.11 2005/12/28 19:57:05 eim Exp $ # # You can copy this file to ~/.mp3roaster/mp3roasterrc or to ~/.mp3roasterrc and # adapt it to your needs, all variables which are listed here can also be passed # via CLI options to mp3roaster. # # # CDR DEV # # Configure here the SCSI ID target of your CD/RW recorder, you can execute # % cdrecord -scanbus to scan the SCSI bus and find the ID of your CD/RW # recorder. # # If you have an IDE CDR or CD/RW writer and you are running Linux kernel >= 2.6 # you can specify directly your CDR or CD/RW recorder device by it's name on the # /dev file system, e.g. /dev/cdrom, /dev/hdc, etc. # $config_cdr_dev = "/dev/cdrom"; # # CDR SPEED # # Configure here the burn speed supported by your CD/RW recorder, if you don't # know the maximum compatible burning speed of your CD/RW recorder I suggest to # use 4 as burning speed value. Use -1 to let choose cdrecord. # $config_cdr_speed = -1; # # CDR DUMMY # # With this option you can enable or disable the cdrecord dummy mode, when dummy # mode is enabled (option set to 1) cdrecord will perform all operations with # laser turned off, I've added this option for testing purposes so leave it # disabled in doubt. # $config_cdr_dummy = 0; # # CDR DAO # # Use this option to record a CD in disk-at-once mode. # This allows live CD tracks to be burned with no gaps between them. # $config_cdr_dao = 0; # # CDR BURNFREE # # Configure here whether you want your drive to use burnfree technology to # prevent buffer underruns. # $config_cdr_burnfree = 1; # # TEMP DIR # # Configure here the temporary directory to use by MP3Roaster, this directory # will hold all uncompressed WAV files during the burning process so it should # be big enough to hold all the songs for your audio CD, after successful burning # all the WAV files in this directory will be removed. # $config_temp_dir = "/tmp/wav"; # # MP3 DECODER # # Choose your favorite mp3 decoder: mpg321 or mpg123. # $config_mp3_decoder = "mpg123"; # # CHECK FILES # # Here you can enable or disable the check files tasks. # $config_check_lowercase = 0; $config_check_spaces = 0; $config_check_brackets = 0; $config_check_quotes = 0; $config_check_questions = 0; # # WAV NORMALIZE # # Enable or disable the wav normalizing support, when this option is enabled (1) # then all the wav files will be normalized to the same audio level, in order to # do this you need normalize installed on your system. # $config_wav_normalize = 1;