# Note: # # This example may require additional features to be added to LAMMPS. If # LAMMPS complains about an "Invalid pair_style", then download copy the # "additional_lammps_code" from moltemplate.org, unpack it into your LAMMPS # "src" directory and recompile LAMMPS. # # -------- Description -------- # # This example contains an implementation of the DPPC lipid bilayer described in # G. Brannigan, P.F. Philips, and F.L.H. Brown, # Physical Review E, Vol 72, 011915 (2005) # and: # M.C. Watson, E.S. Penev, P.M. Welch, and F.L.H. Brown # J. Chem. Phys. 135, 244701 (2011) # # As in Watson(JCP 2011), rigid bond-length constraints have been replaced # by harmonic bonds. # # --- DLPC lipids --- # A truncated version of the DPPC lipid (named "DLPC") has also been added. # Unlike the original "DPPC" molecule model, "DLPC" has not been carefully # parameterized to reproduce the correct behavior in a lipid bilayer/mixture. # (You may need to stiffen the bond-angle forces to make it behave correctly, # but I did not do this here.) # # Units: # # The "epsilon" parameter in their model is approximately 2.75 kJ/mole # ( = 0.657265774378585 kcal/mole, using 1kcal=4.184kJ) # The "sigma" parameter corresponds to 7.5 angstroms. # # # The new DLPC model is a truncated version of DPPC, # (Its behaviour has not been rigorously tested.) CGLipidBr2005 { write_once("In Init") { # -- Default styles for "CGLipidBr2005" -- units real atom_style full # (Hybrid force field styles were used for portability.) bond_style hybrid harmonic angle_style hybrid cosine/delta # <- used in the original article #angle_style hybrid harmonic # <- prevents unphysical acute angle turns # Explanation: # angle_style cosine/delta: U(theta) = k*(1-cos(theta-theta0)) # angle_style harmonic: U(theta) = k*(theta-theta0)^2 dihedral_style none improper_style none pair_style hybrid table linear 1130 & lj/charmm/coul/charmm/inter es4k4l 14.5 15 pair_modify mix arithmetic special_bonds lj 0.0 0.0 1.0 # turn off pairs if "less than 3 bonds" } DPPC { write("Data Atoms") { $atom:h $mol:. @atom:head 0.0 0.00 0.00 33.75 # DPPC head atom $atom:i $mol:. @atom:../int 0.0 -1.00 0.00 26.25 $atom:t1 $mol:. @atom:../tail 0.0 1.00 0.00 18.75 $atom:t2 $mol:. @atom:../tail 0.0 -1.00 0.00 11.25 $atom:t3 $mol:. @atom:../tail 0.0 1.00 0.00 3.75 } write("Data Bonds") { $bond:b1 @bond:../backbone $atom:h $atom:i $bond:b2 @bond:../backbone $atom:i $atom:t1 $bond:b3 @bond:../backbone $atom:t1 $atom:t2 $bond:b4 @bond:../backbone $atom:t2 $atom:t3 } write("Data Angles") { $angle:a1 @angle:../backbone $atom:h $atom:i $atom:t1 $angle:a2 @angle:../backbone $atom:i $atom:t1 $atom:t2 $angle:a3 @angle:../backbone $atom:t1 $atom:t2 $atom:t3 } # Define properties of the local (lipid-specific) atom:head type atom: write_once("Data Masses") { @atom:head 200.0 } write_once("In Settings") { pair_coeff @atom:head @atom:head lj/charmm/coul/charmm/inter 0.1643 7.5 0.4 0 pair_coeff @atom:../int @atom:head lj/charmm/coul/charmm/inter 0.1643 7.5 0.4 0 pair_coeff @atom:../tail @atom:head lj/charmm/coul/charmm/inter 0.1643 7.5 0.4 0 } } #DPPC DLPC { write("Data Atoms") { $atom:h $mol:. @atom:head 0.0 0.00 0.00 30.00 # DLPC head atom $atom:i $mol:. @atom:../int 0.0 -1.00 0.00 22.50 $atom:t1 $mol:. @atom:../tail 0.0 1.00 0.00 15.00 $atom:t2 $mol:. @atom:../tail 0.0 -1.00 0.00 7.50 } write("Data Bonds") { $bond:b1 @bond:../backbone $atom:h $atom:i $bond:b2 @bond:../backbone $atom:i $atom:t1 $bond:b3 @bond:../backbone $atom:t1 $atom:t2 } write("Data Angles") { $angle:a1 @angle:../backbone $atom:h $atom:i $atom:t1 $angle:a2 @angle:../backbone $atom:i $atom:t1 $atom:t2 } # Define properties of the local (lipid-specific) atom:head type atom: write_once("Data Masses") { @atom:head 200.0 } write_once("In Settings") { pair_coeff @atom:head @atom:head lj/charmm/coul/charmm/inter 0.1643 7.5 0.4 0 pair_coeff @atom:../int @atom:head lj/charmm/coul/charmm/inter 0.1643 7.5 0.4 0 pair_coeff @atom:../tail @atom:head lj/charmm/coul/charmm/inter 0.1643 7.5 0.4 0 } } #DLPC # Particles and properties shared by all lipid types: write_once("Data Masses") { @atom:int 200.0 @atom:tail 200.0 } write_once("In Settings") { # -- Default settings/parameters for "CGLipidBr2005" -- # (Hybrid bond & angle styles were used for portability.) # As in Watson(JCP 2011), rigid bond-length constraints # have been replaced by harmonic bonds. # The k_theta parameter should lie in between 5*epsilon and 10*epsilon. bond_coeff @bond:backbone harmonic 116.847 7.5 #<--2*5000*eps/sig^2 } write_once("In Settings") { # cosine/delta: U(theta) = k*(1-cos(theta-theta0)) angle_coeff @angle:backbone cosine/delta 4.60086042 180 #<-- 7*eps ## Alternately, to stiffen the bond-angles, try this: ##angle_coeff @angle:backbone cosine/delta 6.57265774 180 #<-- 10*eps ## harmonic: U(theta) = k*(theta-theta0)^2 not (k/2)*(theta-theta0)^2 ##angle_coeff @angle:backbone harmonic 9.85898661 180 #<-->30*eps } # Note: You may want to use a stiffer bond-angle than the original # Brannigan&Brown 2005 paper if you want to mix two different lipids together. # (The mixture of lipids introduces a great deal of disorder into the bilayer # which would not be present in a DPPC bilayer. This caused pores to form # in my simulations. But increasing the angle stiffness prevents this.) write_once("In Settings") { # The interaction of "atom:int" with other "atom:int" atoms is given by # epsilon*(0.4*(sigma/r)^12 - 3.0*(sigma/r)^2), shifted and cutoff at # r=3*sigma. This was implemented using pair_style table. # Unfortunately, mixing lj/charmm and "table" pair styles in the same # simulation is very inneficient. pair_coeff @atom:int @atom:int table table_int.dat INT # The interaction of tail beads with eachother is given by the formula below # and with other atoms ...using Lorenz-Berthelot and "repulsive wins" rules: # epsilon*(0.4*(sigma/r)^12 - 1.0*(sigma/r)^6), pair_coeff @atom:tail @atom:tail lj/charmm/coul/charmm/inter 0.1643 7.5 0.4 -1 pair_coeff @atom:int @atom:tail lj/charmm/coul/charmm/inter 0.1643 7.5 0.4 -1 # The interaction between head beads from different types of lipids # is (currently) repulsive: pair_coeff @atom:DPPC/head @atom:DLPC/head lj/charmm/coul/charmm/inter 0.1643 7.5 0.4 0 } # write_once("In Settings") # Note: I divided epsilon by 4 to get "0.1643" because we are using the # "es4k4l" coeffstyle, corresponding to U(r)=eps(4*K*(s/r)^12 + 4*L*(s/r)^6) # (The "es4k4l" coeffstyle is the default.) Using this convention makes it # easier to mix this coarse-grained lipid model with other molecular models. } # CGLipidBr2005 # Note: This example has not been optimized for speed. # # Unfortunately, using both lj/charmm and "table" pair styles in the same # simulation seems to be very inneficient. (The simulation is twice as slow # as using only the "lj/charmm" pair styles for every pairwise interaction, # ...and about 25% slower than using "table" for every pairwise interaction. # However the lennard-jones pair styles support mixing, so we use them to # make it easier to run these molecules with other molecules which don't use # pair_table. I felt that portability was worth the extra 25% slow down.)