/* * This file is part of the MicroPython project, http://micropython.org/ * * The MIT License (MIT) * * Copyright (c) 2023 Arduino SA * * Permission is hereby granted, free of charge, to any person obtaining a copy * of this software and associated documentation files (the "Software"), to deal * in the Software without restriction, including without limitation the rights * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell * copies of the Software, and to permit persons to whom the Software is * furnished to do so, subject to the following conditions: * * The above copyright notice and this permission notice shall be included in * all copies or substantial portions of the Software. * * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN * THE SOFTWARE. */ #include "py/mphal.h" #include "r_sce.h" // Key code for writing PRCR register. #define BSP_PRV_PRCR_KEY (0xA500U) #define BSP_PRV_PRCR_PRC1_UNLOCK ((BSP_PRV_PRCR_KEY) | 0x2U) #define BSP_PRV_PRCR_LOCK ((BSP_PRV_PRCR_KEY) | 0x0U) #define BOOT_DOUBLE_TAP_DATA (0x07738135) #define BOOT_DOUBLE_TAP_ADDR (*((volatile uint32_t *)&R_SYSTEM->VBTBKR[0])) void PORTENTA_C33_board_startup() { // Enable USB_BASE R_SYSTEM->PRCR = (uint16_t)BSP_PRV_PRCR_PRC1_UNLOCK; R_MSTP->MSTPCRB &= ~(1U << 11U); R_MSTP->MSTPCRB &= ~(1U << 12U); R_SYSTEM->PRCR = (uint16_t)BSP_PRV_PRCR_LOCK; // Re-enable IRQs after jump from the bootloader. __enable_irq(); } void PORTENTA_C33_board_enter_bootloader(void) { R_SYSTEM->PRCR = (uint16_t)BSP_PRV_PRCR_PRC1_UNLOCK; BOOT_DOUBLE_TAP_ADDR = BOOT_DOUBLE_TAP_DATA; R_SYSTEM->PRCR = (uint16_t)BSP_PRV_PRCR_LOCK; NVIC_SystemReset(); }