// SPDX-License-Identifier: GPL-2.0 /* * Copyright 2022 Google LLC */ #include "socfpga_arria10.dtsi" / { model = "Enclustra Mercury+ AA1"; compatible = "enclustra,mercury-aa1", "altr,socfpga-arria10", "altr,socfpga"; aliases { ethernet0 = &gmac0; serial1 = &uart1; spi0 = &qspi; }; memory@0 { name = "memory"; device_type = "memory"; reg = <0x0 0x80000000>; /* 2GB */ }; chosen { stdout-path = "serial1:115200n8"; }; /* Adjusted the i2c labels to use generic base-board dtsi files for * Enclustra Arria10 and Cyclone5 SoMs. * * The set of i2c0 and i2c1 labels defined in socfpga_cyclone5.dtsi and in * socfpga_arria10.dtsi do not allow for using the same base-board .dtsi * fragments. Thus define generic labels here to match the correct i2c * bus in a generic base-board .dtsi file. */ soc { i2c_encl: i2c@ffc02300 { }; i2c_encl_fpga: i2c@ffc02200 { }; }; }; &i2c_encl { status = "okay"; i2c-sda-hold-time-ns = <300>; clock-frequency = <100000>; atsha204a: crypto@64 { compatible = "atmel,atsha204a"; reg = <0x64>; }; isl12022: rtc@6f { compatible = "isil,isl12022"; reg = <0x6f>; }; }; &i2c_encl_fpga { i2c-sda-hold-time-ns = <300>; status = "disabled"; }; &gmac0 { status = "okay"; phy-mode = "rgmii-id"; phy-addr = <0xffffffff>; /* probe for phy addr */ max-frame-size = <3800>; phy-handle = <&phy3>; /delete-property/ mac-address; mdio { #address-cells = <1>; #size-cells = <0>; compatible = "snps,dwmac-mdio"; phy3: ethernet-phy@3 { reg = <3>; /* Add 2ns RX clock delay (1.2ns + 0.78ns)*/ rxc-skew-ps = <1680>; /* 780ps */ rxd0-skew-ps = <420>; /* 0ps */ rxd1-skew-ps = <420>; /* 0ps */ rxd2-skew-ps = <420>; /* 0ps */ rxd3-skew-ps = <420>; /* 0ps */ rxdv-skew-ps = <420>; /* 0ps */ /* Add 1.38ns TX clock delay (0.96ns + 0.42ns)*/ txc-skew-ps = <1860>; /* 960ps */ txd0-skew-ps = <0>; /* -420ps */ txd1-skew-ps = <0>; /* -420ps */ txd2-skew-ps = <0>; /* -420ps */ txd3-skew-ps = <0>; /* -420ps */ txen-skew-ps = <0>; /* -420ps */ }; }; }; &gpio0 { status = "okay"; }; &gpio1 { status = "okay"; }; &gpio2 { status = "okay"; }; &uart0 { status = "disabled"; }; &uart1 { status = "okay"; }; /* Following mappings are taken from arria10 socdk dts */ &mmc { status = "okay"; cap-sd-highspeed; broken-cd; bus-width = <4>; clk-phase-sd-hs = <0>, <135>; }; &osc1 { clock-frequency = <33330000>; }; &eccmgr { sdmmca-ecc@ff8c2c00 { compatible = "altr,socfpga-sdmmc-ecc"; reg = <0xff8c2c00 0x400>; altr,ecc-parent = <&mmc>; interrupts = <15 IRQ_TYPE_LEVEL_HIGH>, <47 IRQ_TYPE_LEVEL_HIGH>, <16 IRQ_TYPE_LEVEL_HIGH>, <48 IRQ_TYPE_LEVEL_HIGH>; }; }; &qspi { status = "okay"; flash0: flash@0 { u-boot,dm-pre-reloc; #address-cells = <1>; #size-cells = <1>; compatible = "jedec,spi-nor"; reg = <0>; spi-rx-bus-width = <4>; spi-tx-bus-width = <4>; spi-max-frequency = <10000000>; cdns,read-delay = <4>; cdns,tshsl-ns = <50>; cdns,tsd2d-ns = <50>; cdns,tchsh-ns = <4>; cdns,tslch-ns = <4>; partition@raw { label = "Flash Raw"; reg = <0x0 0x4000000>; }; }; }; &watchdog1 { status = "disabled"; }; &usb0 { status = "okay"; dr_mode = "host"; };