/testing/guestbin/swan-prep --nokeys Creating empty NSS database east # cp policies/* /etc/ipsec.d/policies/ east # echo "192.1.3.0/24" >> /etc/ipsec.d/policies/clear east # ipsec start Redirecting to: [initsystem] east # ../../guestbin/wait-until-pluto-started east # # give OE policies time to load east # ../../guestbin/wait-for.sh --match 'loaded 10' -- ipsec auto --status Total IPsec connections: loaded 10, active 0 east # echo "initdone" initdone east # ../../guestbin/ipsec-kernel-state.sh east # ../../guestbin/ipsec-kernel-policy.sh src 192.1.2.23/32 dst 192.1.2.253/32 dir out priority PRIORITY ptype main src 192.1.2.23/32 dst 192.1.2.254/32 dir out priority PRIORITY ptype main src 192.1.2.23/32 dst 192.1.3.253/32 dir out priority PRIORITY ptype main src 192.1.2.23/32 dst 192.1.3.254/32 dir out priority PRIORITY ptype main src 192.1.2.253/32 dst 192.1.2.23/32 dir fwd priority PRIORITY ptype main src 192.1.2.253/32 dst 192.1.2.23/32 dir in priority PRIORITY ptype main src 192.1.2.254/32 dst 192.1.2.23/32 dir fwd priority PRIORITY ptype main src 192.1.2.254/32 dst 192.1.2.23/32 dir in priority PRIORITY ptype main src 192.1.3.253/32 dst 192.1.2.23/32 dir fwd priority PRIORITY ptype main src 192.1.3.253/32 dst 192.1.2.23/32 dir in priority PRIORITY ptype main src 192.1.3.254/32 dst 192.1.2.23/32 dir fwd priority PRIORITY ptype main src 192.1.3.254/32 dst 192.1.2.23/32 dir in priority PRIORITY ptype main src 192.1.2.23/32 dst 192.1.3.0/24 dir out priority PRIORITY ptype main src 192.1.3.0/24 dst 192.1.2.23/32 dir fwd priority PRIORITY ptype main src 192.1.3.0/24 dst 192.1.2.23/32 dir in priority PRIORITY ptype main east # # should not show any hits east # grep "initiate on-demand" /tmp/pluto.log east #