../../guestbin/algo.sh /etc/ipsec.conf ... config setup ikev1-policy=drop # put the logs in /tmp for the UMLs, so that we can operate # without syslogd, which seems to break on UMLs logfile=/tmp/pluto.log logtime=no logappend=no dumpdir=/tmp plutodebug=all conn algo # IKE keyexchange=ikev2 ike=aes128-sha1-ecp384 left=192.1.2.45 right=192.1.2.23 authby=secret leftid=@west rightid=@east # CHILD leftsubnet=192.0.1.0/24 rightsubnet=192.0.2.0/24 #phase2= #phase2alg= #type= #compress= /etc/ipsec.d/ipsec.secrets ... @west @east : PSK "ABCDEFGHIJKLMNOPQRSTUVWXYZ1234567890" starting pluto ... Redirecting to: [initsystem] "algo": added IKEv2 connection west # ipsec auto --up algo "algo" #1: initiating IKEv2 connection to 192.1.2.23 using UDP "algo" #1: sent IKE_SA_INIT request to 192.1.2.23:UDP/500 "algo" #1: processed IKE_SA_INIT response from 192.1.2.23:UDP/500 {cipher=AES_CBC_128 integ=HMAC_SHA1_96 prf=HMAC_SHA1 group=DH20}, initiating IKE_AUTH "algo" #1: sent IKE_AUTH request to 192.1.2.23:UDP/500 "algo" #1: initiator established IKE SA; authenticated peer using authby=secret and ID_FQDN '@east' "algo" #2: initiator established Child SA using #1; IPsec tunnel [192.0.1.0/24===192.0.2.0/24] {ESP/ESN=>0xESPESP <0xESPESP xfrm=AES_GCM_16_256-NONE DPD=passive} west # ../../guestbin/ping-once.sh --up -I 192.0.1.254 192.0.2.254 up west # ipsec whack --trafficstatus #2: "algo", type=ESP, add_time=1234567890, inBytes=84, outBytes=84, maxBytes=2^63B, id='@east' west #