# # This file is provided under a dual BSD/GPLv2 license. When using or # redistributing this file, you may do so under either license. # # GPL LICENSE SUMMARY # # Copyright(c) 2017 Intel Corporation. # # This program is free software; you can redistribute it and/or modify # it under the terms of version 2 of the GNU General Public License as # published by the Free Software Foundation. # # This program is distributed in the hope that it will be useful, but # WITHOUT ANY WARRANTY; without even the implied warranty of # MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU # General Public License for more details. # # Contact Information: # Intel Corporation, www.intel.com # # BSD LICENSE # # Copyright(c) 2017 Intel Corporation. # # Redistribution and use in source and binary forms, with or without # modification, are permitted provided that the following conditions # are met: # # * Redistributions of source code must retain the above copyright # notice, this list of conditions and the following disclaimer. # * Redistributions in binary form must reproduce the above copyright # notice, this list of conditions and the following disclaimer in # the documentation and/or other materials provided with the # distribution. # * Neither the name of Intel Corporation nor the names of its # contributors may be used to endorse or promote products derived # from this software without specific prior written permission. # # THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS # "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT # LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR # A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT # OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, # SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT # LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, # DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY # THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT # (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE # OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. # HISTORY = .outdirs HISTORIC_TARGETS = $(patsubst %, %_clean, $(shell cat $(HISTORY) 2> /dev/null)) RPM_NAME := libpsm2 CONFIG_FILE := .config TEMP_INST_DIR := $(shell mktemp -d) ifeq ($(CONFIG_FILE), $(wildcard $(CONFIG_FILE))) include $(CONFIG_FILE) endif PSM_HAL_ENABLE ?= * PSM_HAL_ENABLE_D = $(wildcard $(addprefix psm_hal_,$(PSM_HAL_ENABLE))) PSM_HAL_INSTANCE_OBJFILES = $(addsuffix /*.o,$(PSM_HAL_ENABLE_D)) SUBDIRS = ptl_self ptl_ips ptl_am libuuid opa ${wildcard $(PSM_HAL_ENABLE_D)} top_srcdir := $(shell readlink -m .) # Default locations OUTDIR := $(top_srcdir)/build_release MOCK_OUTDIR := $(top_srcdir)/build_mock DEBUG_OUTDIR := $(top_srcdir)/build_debug # We need a temporary test variable, as the OUTDIR macro # can be overriden by the shell and thus not run. TESTOUTDIR= $(shell readlink -m $(OUTDIR)) ifeq ($(top_srcdir), $(TESTOUTDIR)) $(error OUTDIR cannot be the same as your source folder ${top_srcdir})) endif ifeq (/,$(TESTOUTDIR)) $(error OUTDIR cannot be the / folder )) endif # Forces any value to be full path. # We don't need to override MOCK_OUTDIR or DEBUG_OUTDIR # as they are recursive make invocations and use OUTDIR ifneq ($(MAKECMDGOALS), mock) ifneq ($(MAKECMDGOALS), debug) override OUTDIR := $(shell readlink -m $(OUTDIR)) endif endif PSM2_VERNO_MAJOR := $(shell sed -n 's/^\#define.*PSM2_VERNO_MAJOR.*0x0\?\([1-9a-f]\?[0-9a-f]\+\).*/\1/p' $(top_srcdir)/psm2.h) PSM2_VERNO_MINOR := $(shell sed -n 's/^\#define.*PSM2_VERNO_MINOR.*0x\([0-9]\?[0-9a-f]\+\).*/\1/p' $(top_srcdir)/psm2.h) PSM2_LIB_MAJOR := $(shell printf "%d" ${PSM2_VERNO_MAJOR}) PSM2_LIB_MINOR := $(shell printf "%d" `sed -n 's/^\#define.*PSM2_VERNO_MINOR.*\(0x[0-9a-f]\+\).*/\1/p' $(top_srcdir)/psm2.h`) LINKER_SCRIPT_FILE = ${OUTDIR}/psm2_linker_script.map SOURCES_CHKSUM_FILES = Makefile buildflags.mak $(LINKER_SCRIPT_FILE) \ `find . -regex '\(.*\.h\|.*\.c\)' -not -path "./test/*" -not -path "./tools/*" -not -path "_revision.c" | sort` SOURCES_CHKSUM_VALUE = $(shell cat ${SOURCES_CHKSUM_FILES} | sha1sum | cut -d' ' -f 1) OPA_LIB_MAJOR := 4 OPA_LIB_MINOR := 0 export PSM2_VERNO_MAJOR export PSM2_LIB_MAJOR export PSM2_VERNO_MINOR export PSM2_LIB_MINOR export OPA_LIB_MAJOR export OPA_LIB_MINOR export CCARCH ?= gcc export FCARCH ?= gfortran export AR ?= ar include $(top_srcdir)/buildflags.mak # We need to unexport these environs as during mock testing and normal calls, # if they are exported then during each submake they will be evaulated again. # This is costly and the LINKER_SCRIPT_FILE doesn't exist until after its # target rule runs. unexport SOURCES_CHKSUM_FILES unexport SOURCES_CHKSUM_VALUE unexport LINKER_SCRIPT_FILE INCLUDES += -I$(top_srcdir) -I$(top_srcdir)/ptl_ips -I$(OUTDIR) ifneq (x86_64,$(arch)) ifneq (i386,$(arch)) $(error Unsupported architecture $(arch)) endif endif ifndef LIBDIR ifeq (${arch},x86_64) INSTALL_LIB_TARG=/usr/lib64 else INSTALL_LIB_TARG=/usr/lib endif else INSTALL_LIB_TARG=${LIBDIR} endif export DESTDIR export INSTALL_LIB_TARG TARGLIB := libpsm2 COMPATMAJOR := $(shell sed -n 's/^\#define.*PSM2_VERNO_COMPAT_MAJOR.*0x0\?\([1-9a-f]\?[0-9a-f]\+\).*/\1/p' \ $(top_srcdir)/psm2.h) COMPATLIB := libpsm_infinipath MAJOR := $(PSM2_LIB_MAJOR) MINOR := $(PSM2_LIB_MINOR) nthreads := $(shell echo $$(( `nproc` * 2 )) ) # The following line sets the DISTRO variable to: # 'rhel' if the host is running RHEL. # 'suse' if the host is running SUSE. # 'fedora' if the host is running Fedora. # 'ubuntu' if the host is running Ubuntu. # # The DISTRO variable is used subsequently for variable # behaviors of the 3 distros. DISTRO := $(shell . /etc/os-release; if [ "$$ID" = "sle_hpc" ]; then ID="sles"; fi; echo $$ID) # By default the following two variables have the following values: LIBPSM2_COMPAT_CONF_DIR := /etc LIBPSM2_COMPAT_SYM_CONF_DIR := /etc # We can't set SPEC_FILE_RELEASE_DIST to an empty value, a space will result. # It then messes up sed operations for PSM_CUDA=1. # So leaving the commented out line here as documentation to NOT set it. # SPEC_FILE_RELEASE_DIST := UDEV_40_PSM_RULES := %{_udevrulesdir}/40-psm.rules ifeq (fedora,$(DISTRO)) # On Fedora, we change these two variables to these values: LIBPSM2_COMPAT_CONF_DIR := /usr/lib LIBPSM2_COMPAT_SYM_CONF_DIR := %{_prefix}/lib SPEC_FILE_RELEASE_DIST := %{?dist} UDEV_40_PSM_RULES :=# else ifeq (rhel,${DISTRO}) # Insert code specific to RHEL here. else ifeq (sles,${DISTRO}) # Insert code specific to SLES here. endif ifdef PSM_CUDA #Value needs to be something without spaces or dashes '-' SPEC_FILE_RELEASE_DIST += cuda endif export LIBPSM2_COMPAT_CONF_DIR # The desired version number comes from the most recent tag starting with "v" ifeq (true, false) ISGIT := 1 # Cache the result for later # Note, we don't define ISGIT if we are not in a git folder VERSION := $(shell git describe --tags --abbrev=0 --match='psm-v*' | sed -e 's/^psm-v//' -e 's/-/_/') else ISGIT := 0 VERSION := version endif # If we have a file called 'rpm_release_extension' (as on github), # we take the release extension number from this file RELEASE_EXT := $(shell if [ -e rpm_release_extension ] ;\ then cat rpm_release_extension; fi) CURRENTSHA := $(shell if [ $(ISGIT) = 1 -a -f rpm_release_extension ] ;\ then git log --pretty=format:'%h' -n 1; fi) RPMEXTHASH := $(shell if [ $(ISGIT) = 1 -a -f rpm_release_extension ] ;\ then git log --pretty=format:'%h' -n 1 rpm_release_extension; fi) # This logic should kick-in only on github ifdef RELEASE_EXT ifneq ($(CURRENTSHA), $(RPMEXTHASH)) # On github, the last commit for each release should be the one to bump up # the release extension number in 'rpm_release_extension'. Further commits # are counted here and appended to the final rpm name to distinguish commits # present only on github NCOMMITS := $(shell if [ $(ISGIT) = 1 -a -f rpm_release_extension ] ;\ then git log --children $(RPMEXTHASH)..$(CURRENTSHA) \ --pretty=oneline . | wc -l; fi) RELEASE := $(RELEASE_EXT)_$(NCOMMITS) endif endif # The desired release number comes the git describe following the version which # is the number of commits since the version tag was planted suffixed by the g ifndef RELEASE RELTAG := "psm-v$(VERSION)" RELEASE := $(shell if [ -f rpm_release_extension ]; then cat rpm_release_extension;\ elif [ $(ISGIT) = 1 ] ; then git rev-list $(RELTAG)..HEAD -- . | wc -l; \ else echo "release" ; fi) endif DIST_SHA := ${shell if [ $(ISGIT) = 1 ] ; then git log -n1 --pretty=format:%H .; \ else echo DIST_SHA ; fi} # Concatenated version and release ifndef VERSION_RELEASE_OVERRIDE VERSION_RELEASE := $(VERSION).$(RELEASE) else VERSION_RELEASE := ${VERSION_RELEASE_OVERRIDE} endif LDLIBS := -lrt -ldl -lnuma ${EXTRA_LIBS} -pthread PKG_CONFIG ?= pkg-config UDEVDIR := $(shell $(PKG_CONFIG) --variable=udevdir udev 2>/dev/null) ifndef UDEVDIR UDEVDIR = /lib/udev endif export UDEVDIR # The DIST variable is a name kernel corresponding to: # 1. The name of the directory containing the source code distribution # (see dist: target below). # 2. The basename of the filename of the tar file created in the dist: # target. DIST := ${RPM_NAME}-${VERSION_RELEASE} # If user has empty RPM NAME BASEEXT (defined or not), then attempt to # see if we are running on SLES 12.3 or newer. # If we are, then change the base package name, but not the supporting # packages to libpsm2-2. Do note this requires support both in the Makefile # specfile target rule as well as changes in the libpsm2.spec.in # file as well. ifeq ($(RPM_NAME_BASEEXT),) # Detect current version of the OS OS := $(shell grep -m1 NAME /etc/os-release | cut -f 2 -d\") OSVERSION := $(shell grep VERSION_ID /etc/os-release | cut -f 2 -d\" | cut -f 1 -d.) OSSUBVERSION := $(shell grep VERSION_ID /etc/os-release | cut -f 2 -d\" | cut -f 2 -d.) override RPM_NAME_BASEEXT := $(shell \ if [ "$(OS)" = "SLES" -o "$(OS)" = "SLE_HPC" ]; then \ if [ $(OSVERSION) -gt 11 ]; then \ if [ $(OSVERSION) -eq 12 ]; then \ if [ $(OSSUBVERSION) -gt 2 ]; then \ echo "-2"; \ fi \ else \ echo "-2"; \ fi \ fi \ fi) endif HALDECLFILE=$(OUTDIR)/psm2_hal_inlines_d.h HALIMPLFILE=$(OUTDIR)/psm2_hal_inlines_i.h all: symlinks $(HALDECLFILE) $(HALIMPLFILE) | $(OUTDIR) @if [ ! -e $(HISTORY) ] || [ -z "`grep -E '^$(OUTDIR)$$' $(HISTORY)`" ]; then \ echo $(OUTDIR) >> $(HISTORY); \ fi # Our buildflags.mak exports all variables, all are propogated to submakes. @for subdir in $(SUBDIRS); do \ mkdir -p $(OUTDIR)/$$subdir; \ $(MAKE) -j $(nthreads) -C $$subdir OUTDIR=$(OUTDIR)/$$subdir; \ if [ $$? -ne 0 ]; then exit 1; fi ;\ done $(MAKE) -j $(nthreads) $(OUTDIR)/${TARGLIB}.so $(MAKE) -j $(nthreads) $(OUTDIR)/${TARGLIB}.a @mkdir -p $(OUTDIR)/compat $(MAKE) -j $(nthreads) -C compat OUTDIR=$(OUTDIR)/compat $(HALDECLFILE): | $(OUTDIR) @test -f $(HALDECLFILE) || ( \ n_hal_insts=$(words $(wildcard $(PSM_HAL_ENABLE_D)));\ echo "#define PSMI_HAL_INST_CNT $$n_hal_insts" > $(HALDECLFILE);\ if [ $$n_hal_insts -eq 1 ]; then \ echo "#define PSMI_HAL_INLINE inline" >> $(HALDECLFILE);\ hal_inst_dir=$(PSM_HAL_ENABLE_D); \ echo "#define PSMI_HAL_CAT_INL_SYM(KERNEL) hfp_$(subst psm_hal_,,$(PSM_HAL_ENABLE_D))" \ "## _ ## KERNEL" >> $(HALDECLFILE);\ echo "#include \"psm2_hal_inline_t.h\"" >> $(HALDECLFILE);\ else \ echo "#define PSMI_HAL_INLINE /* nothing */" >> $(HALDECLFILE);\ fi ) $(HALIMPLFILE): | $(OUTDIR) @test -f $(HALIMPLFILE) || ( \ n_hal_insts=$(words $(wildcard $(PSM_HAL_ENABLE_D)));\ if [ $$n_hal_insts -eq 1 ]; then\ hal_inst=$(PSM_HAL_ENABLE_D);\ echo "#include \"$$hal_inst/psm_hal_inline_i.h\"" >> $(HALIMPLFILE);\ else\ echo "/* no inlining since more than 1 hal instance" >> $(HALIMPLFILE);\ echo " is included in the libpsm2 linkage. */" >> $(HALIMPLFILE);\ fi ) %_clean: make OUTDIR=$* clean clean: cleanlinks rm -rf ${OUTDIR} @if [ -e $(HISTORY) ]; then \ grep -v -E "^$(OUTDIR)$$" $(HISTORY) > $(HISTORY)_tmp; \ mv $(HISTORY)_tmp $(HISTORY); \ if [ "`wc -c $(HISTORY) | cut -d ' ' -f 1`" -eq 0 ]; then \ rm -f $(HISTORY); \ fi; \ fi rm -fr $(TEMP_INST_DIR) # Easily add more items to config target if more options need # to be cached. config: $(CONFIG_FILE) $(CONFIG_FILE): @echo PSM_HAL_ENABLE=$(PSM_HAL_ENABLE) > $(CONFIG_FILE) @echo CCARCH=$(CCARCH) >> $(CONFIG_FILE) @echo HFI_BRAKE_DEBUG=$(HFI_BRAKE_DEBUG) >> $(CONFIG_FILE) @echo PSM_DEBUG=$(PSM_DEBUG) >> $(CONFIG_FILE) @echo PSM_AVX512=$(PSM_AVX512) >> $(CONFIG_FILE) @echo PSM_LOG=$(PSM_LOG) >> $(CONFIG_FILE) @echo PSM_LOG_FAST_IO=$(PSM_LOG_FAST_IO) >> $(CONFIG_FILE) @echo PSM_PERF=$(PSM_PERF) >> $(CONFIG_FILE) @echo PSM_HEAP_DEBUG=$(PSM_HEAP_DEBUG) >> $(CONFIG_FILE) @echo PSM_PROFILE=$(PSM_PROFILE) >> $(CONFIG_FILE) @echo PSM_CUDA=$(PSM_CUDA) >> $(CONFIG_FILE) @echo Wrote $(CONFIG_FILE) mock: OUTDIR := $(MOCK_OUTDIR) mock: $(MAKE) OUTDIR=$(OUTDIR) PSM2_MOCK_TESTING=1 debug: OUTDIR := $(DEBUG_OUTDIR) debug: $(MAKE) OUTDIR=$(OUTDIR) PSM_DEBUG=1 test_clean: if [ -d ./test ]; then \ $(MAKE) -C test clean; \ fi specfile_clean: rm -f ${OUTDIR}/${RPM_NAME}.spec distclean: specfile_clean cleanlinks $(HISTORIC_TARGETS) test_clean rm -f $(CONFIG_FILE) rm -rf ${OUTDIR}/${DIST} rm -f ${OUTDIR}/${DIST}.tar.gz rm -fr temp.* *.rej.patch $(OUTDIR): mkdir -p ${OUTDIR} symlinks: @test -L $(top_srcdir)/include/linux-x86_64 || \ ln -sf linux-i386 $(top_srcdir)/include/linux-x86_64 cleanlinks: rm -rf $(top_srcdir)/include/linux-x86_64 install: all for subdir in $(SUBDIRS) ; do \ mkdir -p $(OUTDIR)/$$subdir ; \ $(MAKE) -j $(nthreads) -C $$subdir OUTDIR=$(OUTDIR)/$$subdir install ; \ done $(MAKE) -j $(nthreads) $(OUTDIR)/${TARGLIB}.so OUTDIR=$(OUTDIR) $(MAKE) -j $(nthreads) -C compat OUTDIR=$(OUTDIR)/compat install install -D $(OUTDIR)/${TARGLIB}.so.${MAJOR}.${MINOR} \ ${DESTDIR}${INSTALL_LIB_TARG}/${TARGLIB}.so.${MAJOR}.${MINOR} (cd ${DESTDIR}${INSTALL_LIB_TARG} ; \ ln -sf ${TARGLIB}.so.${MAJOR}.${MINOR} ${TARGLIB}.so.${MAJOR} ; \ ln -sf ${TARGLIB}.so.${MAJOR} ${TARGLIB}.so) install -D $(OUTDIR)/${TARGLIB}.a \ ${DESTDIR}${INSTALL_LIB_TARG}/${TARGLIB}.a install -m 0644 -D psm2.h ${DESTDIR}/usr/include/psm2.h install -m 0644 -D psm2_mq.h ${DESTDIR}/usr/include/psm2_mq.h install -m 0644 -D psm2_am.h ${DESTDIR}/usr/include/psm2_am.h ifneq (fedora,${DISTRO}) install -m 0644 -D 40-psm.rules ${DESTDIR}$(UDEVDIR)/rules.d/40-psm.rules endif # The following files and dirs were part of the noship rpm: mkdir -p ${DESTDIR}/usr/include/hfi1diag mkdir -p ${DESTDIR}/usr/include/hfi1diag/linux-x86_64 install -m 0644 -D include/linux-x86_64/bit_ops.h ${DESTDIR}/usr/include/hfi1diag/linux-x86_64/bit_ops.h install -m 0644 -D include/linux-x86_64/sysdep.h ${DESTDIR}/usr/include/hfi1diag/linux-x86_64/sysdep.h install -m 0644 -D include/opa_udebug.h ${DESTDIR}/usr/include/hfi1diag/opa_udebug.h install -m 0644 -D include/opa_debug.h ${DESTDIR}/usr/include/hfi1diag/opa_debug.h install -m 0644 -D include/opa_intf.h ${DESTDIR}/usr/include/hfi1diag/opa_intf.h for h in opa_user_gen1.h opa_service_gen1.h opa_common_gen1.h ; do \ sed -e 's/#include "opa_user_gen1.h"/#include "opa_user.h"/' \ -e 's/#include "opa_common_gen1.h"/#include "opa_common.h"/' \ -e 's/#include "hfi1_deprecated_gen1.h"/#include "hfi1_deprecated.h"/' \ -e 's/#include "opa_service_gen1.h"/#include "opa_service.h"/' psm_hal_gen1/$$h \ > $(TEMP_INST_DIR)/$$h ; \ done cat include/opa_user.h $(TEMP_INST_DIR)/opa_user_gen1.h > $(TEMP_INST_DIR)/opa_user.h cat include/opa_service.h $(TEMP_INST_DIR)/opa_service_gen1.h > $(TEMP_INST_DIR)/opa_service.h install -m 0644 -D $(TEMP_INST_DIR)/opa_user.h ${DESTDIR}/usr/include/hfi1diag/opa_user.h install -m 0644 -D $(TEMP_INST_DIR)/opa_service.h ${DESTDIR}/usr/include/hfi1diag/opa_service.h install -m 0644 -D $(TEMP_INST_DIR)/opa_common_gen1.h ${DESTDIR}/usr/include/hfi1diag/opa_common.h install -m 0644 -D include/opa_byteorder.h ${DESTDIR}/usr/include/hfi1diag/opa_byteorder.h install -m 0644 -D include/psm2_mock_testing.h ${DESTDIR}/usr/include/hfi1diag/psm2_mock_testing.h install -m 0644 -D include/opa_revision.h ${DESTDIR}/usr/include/hfi1diag/opa_revision.h install -m 0644 -D psmi_wrappers.h ${DESTDIR}/usr/include/hfi1diag/psmi_wrappers.h install -m 0644 -D psm_hal_gen1/hfi1_deprecated_gen1.h ${DESTDIR}/usr/include/hfi1diag/hfi1_deprecated.h rm -fr $(TEMP_INST_DIR) specfile: specfile_clean | $(OUTDIR) sed -e 's/@VERSION@/'${VERSION_RELEASE}'/g' libpsm2.spec.in | \ sed -e 's/@TARGLIB@/'${TARGLIB}'/g' \ -e 's/@RPM_NAME@/'${RPM_NAME}'/g' \ -e 's/@RPM_NAME_BASEEXT@/'${RPM_NAME_BASEEXT}'/g' \ -e 's/@COMPATLIB@/'${COMPATLIB}'/g' \ -e 's/@COMPATMAJOR@/'${COMPATMAJOR}'/g' \ -e 's;@UDEVDIR@;'${UDEVDIR}';g' \ -e 's/@MAJOR@/'${MAJOR}'/g' \ -e 's/@MINOR@/'${MINOR}'/g' \ -e 's:@LIBPSM2_COMPAT_CONF_DIR@:'${LIBPSM2_COMPAT_CONF_DIR}':g' \ -e 's:@LIBPSM2_COMPAT_SYM_CONF_DIR@:'${LIBPSM2_COMPAT_SYM_CONF_DIR}':g' \ -e 's;@SPEC_FILE_RELEASE_DIST@;'${SPEC_FILE_RELEASE_DIST}';g' \ -e 's/@DIST_SHA@/'${DIST_SHA}'/g' > \ ${OUTDIR}/${RPM_NAME}.spec if [ -f /etc/redhat-release ] && [ `grep -o "[0-9.]*" /etc/redhat-release | cut -d"." -f1` -lt 7 ]; then \ sed -i 's;@40_PSM_RULES@;'${UDEVDIR}'/rules.d/40-psm.rules;g' ${OUTDIR}/${RPM_NAME}.spec; \ else \ sed -i 's;@40_PSM_RULES@;'${UDEV_40_PSM_RULES}';g' ${OUTDIR}/${RPM_NAME}.spec; \ fi # We can't totally prevent two make dist calls in a row from packaging # the previous make dist, unless we switch to using a dedicated ./src folder # That will come in the next major revision of the Makefile for now we can # prevent the easy and default cases # # Notes on PRUNE_LIST: # To make the dist, we always eliminate the psm_hal_MOCK dir. # we also eliminate the psm hal instances that are not enabled via the PSM_HAL_ENABLE variable. # To implement this, we build the prune list in two passes: # 1. The first pass includes all of the common items we want to exclude. # 2. The second pass we include the differnce of # (all of the PSM HAL instances) minus (the PSM hal instances that are enabled) # The final prune list is supplied to find, and the dist is created. dist: distclean mkdir -p ${OUTDIR}/${DIST} PRUNE_LIST=""; \ for pd in ".git" "cscope*" "$(shell realpath --relative-to=${top_srcdir} ${OUTDIR})" \ "*.orig" "*~" "#*" ".gitignore" "doc" "libcm" "psm.supp" "test" "psm_hal_MOCK" \ "psm_test" "tools" "artifacts" "*.rej.patch"; do \ PRUNE_LIST="$$PRUNE_LIST -name $$pd -prune -o"; \ done; \ for hid in psm_hal_* ; do \ found=0; \ for ehid in $(PSM_HAL_ENABLE_D) ; do \ if [ "$$hid" = "$$ehid" ]; then \ found=1; \ break; \ fi; \ done; \ if [ $$found -eq 0 ]; then \ PRUNE_LIST="$$PRUNE_LIST -name $$hid -prune -o"; \ fi; \ done; \ for x in $$(/usr/bin/find . \ $$PRUNE_LIST \ -print); do \ dir=$$(dirname $$x); \ mkdir -p ${OUTDIR}/${DIST}/$$dir; \ [ ! -d $$x ] && cp $$x ${OUTDIR}/${DIST}/$$dir; \ done if [ $(ISGIT) = 1 ] ; then git log -n1 --pretty=format:%H . > ${OUTDIR}/${DIST}/COMMIT ; fi echo ${RELEASE} > ${OUTDIR}/${DIST}/rpm_release_extension cd ${OUTDIR}; tar czvf ${DIST}.tar.gz ${DIST} @echo "${DIST}.tar.gz is located in ${OUTDIR}/${DIST}.tar.gz" ofeddist: $(MAKE) -j $(nthreads) dist # rebuild the cscope database, skipping sccs files, done once for # top level cscope: find * -type f ! -name '[ps].*' \( -iname '*.[cfhs]' -o \ -iname \\*.cc -o -name \\*.cpp -o -name \\*.f90 \) -print | cscope -bqu -i - sources-checksum: @echo ${SOURCES_CHKSUM_VALUE} ${TARGLIB}-objs := ptl_am/am_reqrep_shmem.o \ ptl_am/am_reqrep.o \ ptl_am/ptl.o \ ptl_am/cmarwu.o \ ptl_am/am_cuda_memhandle_cache.o \ psm_context.o \ psm_ep.o \ psm_ep_connect.o \ psm_error.o \ psm_utils.o \ psm_sysbuf.o \ psm_timer.o \ psm_am.o \ psm_mq.o \ psm_mq_utils.o \ psm_mq_recv.o \ psm_mpool.o \ psm_stats.o \ psm_memcpy.o \ psm_mock.o \ psm.o \ psm_perf.o \ libuuid/psm_uuid.o \ libuuid/parse.o \ libuuid/pack.o \ libuuid/unpack.o \ libuuid/unparse.o \ ptl_ips/ptl.o \ ptl_ips/ptl_rcvthread.o \ ptl_ips/ips_scb.o \ ptl_ips/ips_epstate.o \ ptl_ips/ips_recvq.o \ ptl_ips/ips_recvhdrq.o \ ptl_ips/ips_proto.o \ ptl_ips/ips_proto_recv.o \ ptl_ips/ips_proto_connect.o \ ptl_ips/ips_proto_expected.o \ ptl_ips/ips_tid.o \ ptl_ips/ips_tidcache.o \ ptl_ips/ips_tidflow.o \ ptl_ips/ips_crc32.o \ ptl_ips/ips_proto_dump.o \ ptl_ips/ips_proto_mq.o \ ptl_ips/ips_proto_am.o \ ptl_ips/ips_path_rec.o \ ptl_ips/ips_opp_path_rec.o \ ptl_ips/ips_writehdrq.o \ ptl_self/ptl.o \ opa/*.o \ psm_diags.o \ psm2_hal.o \ $(PSM_HAL_INSTANCE_OBJFILES) \ psmi_wrappers.o ${TARGLIB}-objs := $(patsubst %.o, ${OUTDIR}/%.o, ${${TARGLIB}-objs}) DEPS:= $(${TARGLIB}-objs:.o=.d) -include $(DEPS) ${OUTDIR}/${TARGLIB}.so: ${OUTDIR}/${TARGLIB}.so.${MAJOR} ln -fs ${TARGLIB}.so.${MAJOR}.${MINOR} $@ ${OUTDIR}/${TARGLIB}.so.${MAJOR}: ${OUTDIR}/${TARGLIB}.so.${MAJOR}.${MINOR} ln -fs ${TARGLIB}.so.${MAJOR}.${MINOR} $@ # when we build the shared library, generate a revision and date # string in it, for easier id'ing when people may have copied the # file around. Generate it such that the ident command can find it # and strings -a | grep OPA does a reasonable job as well. $(OUTDIR)/${TARGLIB}.so.${MAJOR}.${MINOR}: ${${TARGLIB}-objs} $(LINKER_SCRIPT_FILE) echo "char psmi_hfi_IFS_version[]=\"`printenv RELEASE_TAG`\";" > ${OUTDIR}/_revision.c date -u -d@$${SOURCE_DATE_EPOCH:-$$(date +%s)} +'char psmi_hfi_build_timestamp[] ="%F %T%:z";' >> ${OUTDIR}/_revision.c echo "char psmi_hfi_sources_checksum[] =\"${SOURCES_CHKSUM_VALUE}\";" >> ${OUTDIR}/_revision.c echo "char psmi_hfi_git_checksum[] =\"`git rev-parse HEAD`\";" >> ${OUTDIR}/_revision.c $(CC) -c $(CFLAGS) $(BASECFLAGS) $(INCLUDES) ${OUTDIR}/_revision.c -o $(OUTDIR)/_revision.o $(CC) $(LINKER_SCRIPT) $(LDFLAGS) -o $@ -Wl,-soname=${TARGLIB}.so.${MAJOR} -shared \ ${${TARGLIB}-objs} $(OUTDIR)/_revision.o $(LDLIBS) $(OUTDIR)/${TARGLIB}.a: $(OUTDIR)/${TARGLIB}.so.${MAJOR}.${MINOR} $(AR) rcs $(OUTDIR)/${TARGLIB}.a ${${TARGLIB}-objs} $(OUTDIR)/_revision.o ${OUTDIR}/%.o: ${top_srcdir}/%.c $(CC) $(CFLAGS) $(BASECFLAGS) $(INCLUDES) -MMD -c $< -o $@ $(LINKER_SCRIPT_FILE): psm2_linker_script_map.in sed "s/_psm2_additional_globals_;/$(PSM2_ADDITIONAL_GLOBALS)/" \ psm2_linker_script_map.in > ${OUTDIR}/psm2_linker_script.map .PHONY: all %_clean clean config mock debug distclean symlinks cleanlinks install specfile dist ofeddist cscope sources-checksum