/* Copyright (c) 2002 Finger Lakes Instrumentation (FLI), L.L.C. All rights reserved. Redistribution and use in source and binary forms, with or without modification, are permitted provided that the following conditions are met: Redistributions of source code must retain the above copyright notice, this list of conditions and the following disclaimer. Redistributions in binary form must reproduce the above copyright notice, this list of conditions and the following disclaimer in the documentation and/or other materials provided with the distribution. Neither the name of Finger Lakes Instrumentation (FLI), LLC nor the names of its contributors may be used to endorse or promote products derived from this software without specific prior written permission. THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. ====================================================================== Finger Lakes Instrumentation, L.L.C. (FLI) web: http://www.fli-cam.com email: support@fli-cam.com */ #include #include #include #include #if (LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,14)) #include #else #if (LINUX_VERSION_CODE < KERNEL_VERSION(2,6,14)) #include #include #else #include #endif #endif #include #include #include #include #include "libfli-libfli.h" #include "libfli-sys.h" #include "libfli-mem.h" #include "libfli-usb.h" #include "fliusb_ioctl.h" long linux_usb_connect(flidev_t dev, fli_unixio_t *io, char *name) { struct usb_device_descriptor usbdesc; fliusb_string_descriptor_t strdesc; int confg, r; if ((io->fd = open(name, O_RDWR)) == -1) { xfree(io); return -errno; } if (ioctl(io->fd, FLIUSB_GET_DEVICE_DESCRIPTOR, &usbdesc) == -1) { debug(FLIDEBUG_FAIL, "%s: Could not read descriptor: %s", __PRETTY_FUNCTION__, strerror(errno)); return -EIO; } if (usbdesc.idVendor != FLIUSB_VENDORID) { debug(FLIDEBUG_INFO, "%s: Not a FLI device!", __PRETTY_FUNCTION__); return -ENODEV; } switch (usbdesc.idProduct) { /* These are valid product IDs */ case FLIUSB_CAM_ID: case FLIUSB_FOCUSER_ID: case FLIUSB_FILTER_ID: case FLIUSB_PROLINE_ID: break; default: /* Anything else is unknown */ return -ENODEV; } DEVICE->devinfo.devid = usbdesc.idProduct; DEVICE->devinfo.fwrev = usbdesc.bcdDevice; strdesc.index = 3; if (ioctl(io->fd, FLIUSB_GET_STRING_DESCRIPTOR, &strdesc) != 0) { debug(FLIDEBUG_FAIL, "%s: Could not read descriptor: %s", __PRETTY_FUNCTION__, strerror(errno)); } else { DEVICE->devinfo.serial = xstrndup((char *) strdesc.buf, sizeof(strdesc.buf)); } confg = 0; r = ioctl (io->fd, USBDEVFS_SETCONFIGURATION, &confg); debug(FLIDEBUG_INFO, "USBDEVFS_SETCONFIGURATION return %i", r); confg = 1; r = ioctl (io->fd, USBDEVFS_SETCONFIGURATION, &confg); debug(FLIDEBUG_INFO, "USBDEVFS_SETCONFIGURATION return %i", r); return 0; } long linux_bulktransfer(flidev_t dev, int ep, void *buf, long *len) { fli_unixio_t *io; fliusb_bulktransfer_t bulkxfer; size_t remaining; int err = 0; #define _DEBUG #ifdef _DEBUG debug(FLIDEBUG_INFO, "%s: attempting %ld bytes %s", __PRETTY_FUNCTION__, *len, (ep & USB_DIR_IN) ? "in" : "out"); #endif io = DEVICE->io_data; #ifdef _DEBUG if ((ep & 0xf0) == 0) { char buffer[1024]; int i; sprintf(buffer, "OUT %6ld: ", *len); for (i = 0; i < ((*len > 16)?16:*len); i++) { sprintf(buffer + strlen(buffer), "%02x ", ((unsigned char *) buf)[i]); } debug(FLIDEBUG_INFO, buffer); } #endif /* _DEBUG */ remaining = *len; while (remaining) /* read up to USB_READ_SIZ_MAX bytes at a time */ { int bytes; bulkxfer.ep = ep; bulkxfer.count = MIN(remaining, USB_READ_SIZ_MAX); bulkxfer.timeout = DEVICE->io_timeout; bulkxfer.buf = buf + *len - remaining; /* This ioctl returns the number of bytes transferred */ bytes = ioctl(io->fd, (ep & USB_DIR_IN) ? FLIUSB_BULKREAD : FLIUSB_BULKWRITE, &bulkxfer); if (bytes < 0) break; remaining -= bytes; if (bytes < bulkxfer.count) break; } /* Set *len to the number of bytes actually transfered */ if (remaining) err = -errno; *len -= remaining; #ifdef _DEBUG if ((ep & 0xf0) != 0) { char buffer[1024]; int i; sprintf(buffer, " IN %6ld: ", *len); for (i = 0; i < ((*len > 16)?16:*len); i++) { sprintf(buffer + strlen(buffer), "%02x ", ((unsigned char *) buf)[i]); } debug(FLIDEBUG_INFO, buffer); } #endif /* _DEBUG */ return err; } long linux_bulkwrite(flidev_t dev, void *buf, long *wlen) { int ep; switch (DEVICE->devinfo.devid) { case FLIUSB_CAM_ID: case FLIUSB_FOCUSER_ID: case FLIUSB_FILTER_ID: ep = 0x02; break; case FLIUSB_PROLINE_ID: ep = 0x01; break; default: debug(FLIDEBUG_FAIL, "Unknown device type."); return -EINVAL; } return linux_bulktransfer(dev, ep | USB_DIR_OUT, buf, wlen); } long linux_bulkread(flidev_t dev, void *buf, long *rlen) { int ep; switch (DEVICE->devinfo.devid) { case FLIUSB_CAM_ID: case FLIUSB_FOCUSER_ID: case FLIUSB_FILTER_ID: ep = 0x02; break; case FLIUSB_PROLINE_ID: ep = 0x01; break; default: debug(FLIDEBUG_FAIL, "Unknown device type."); return -EINVAL; } return linux_bulktransfer(dev, ep | USB_DIR_IN, buf, rlen); } long linux_usb_disconnect(flidev_t dev) { fli_unixio_t *io; io = DEVICE->io_data; long err = 0; if (io->fd != (-1)) err = close(io->fd); return err; }