# translation of katepart4.po to Persian
# Nazanin Kazemi اگر این گزینه علامت بخورد، هر نمای جدید نشانها را در میله لغزش عمودی "
#~ "نمایش میدهد. این نشانها برای نمونه، چوب الفها را نمایش میدهند. If this option is checked, every new view will display an icon border "
#~ "on the left hand side. The icon border shows bookmark signs, for "
#~ "instance. اگر این گزینه نشانگذاری شده باشد، هر نمای جدید، یک مرز شمایل در طرف "
#~ "دست چپ نمایش خواهد داد. مرز شمایل برای نمونه، نشانهای چوبالف را "
#~ "نشان میدهد. If this option is checked, every new view will show marks on the "
#~ "vertical scrollbar. These marks will show bookmarks, for instance."
#~ "p>"
#~ msgstr ""
#~ " اگر این گزینه علامت بخورد، هر نمای جدید نشانها را در میله لغزش عمودی "
#~ "نمایش میدهد. این نشانها برای نمونه، چوب الفها را نمایش میدهند. If this option is checked, hovering over the vertical scrollbar will "
#~ "show a preview of the text. اگر این گزینه علامت بخورد، هر نمای جدید نشانها را در میله لغزش عمودی "
#~ "نمایش میدهد. این نشانها برای نمونه، چوب الفها را نمایش میدهند. The entries are accessible through the submenu Commands in the "
#~ "Tools menu. For faster access it is possible to assign "
#~ "shortcuts in the shortcut configuration page after applying the "
#~ "changes. مدخلهایی که از طریق زیرگزینگان فرمانها در گزینگان ابزار "
#~ "قابل دستیابیاند. برای دستیابی سریعتر انتساب میانبرها در صفحه "
#~ "پیکربندی میانبرها پس از اعمال تغییرات، امکانپذیر است. This icon will be displayed in the menu and toolbar. این شمایل در گزینگان و میلهابزار نمایش داده میشود. Automatically start a new line of text when the current line exceeds "
#~| "the length specified by the Wrap words at: option. This "
#~| "option does not wrap existing lines of text - use the Apply Static "
#~| "Word Wrap option in the Tools menu for that purpose. If "
#~| "you want lines to be visually wrapped instead, according to the "
#~| "width of the view, enable Dynamic Word Wrap in the View "
#~| "Defaults config page. Automatically start a new line of text when the current line exceeds "
#~ "the length specified by the Wrap words at: option. This "
#~ "option does not wrap existing lines of text - use the Apply Static "
#~ "Word Wrap option in the Tools menu for that purpose. If "
#~ "you want lines to be visually wrapped instead, according to the "
#~ "width of the view, enable Dynamic Word Wrap in the Appearance"
#~ "b> config page. وقتی که خط جاری، از طول تعیینشده توسط محل سطربندی کلمات: فراتر "
#~ "رفت، به طور خودکار خط جدیدی از متن را آغاز کن. این گزینه، خطوط "
#~ "موجود متن را سطربندی نمیکند - برای آن منظور، از گزینهٔ اِعمال سطربندی "
#~ "ایستای واژه در گزینگان ابزارها استفاده کنید. در عوض اگر "
#~ "میخواهید خطوط، سطربندی دیداری شوند، طبق عرضِ نما سطربندی پویا"
#~ "b> را در پیشگزیدههای نما فعال کنید. If this option is checked, a vertical line will be drawn at the word "
#~ "wrap column as defined in the Editing properties."
#~ "p> Note that the word wrap marker is only drawn if you use a fixed "
#~ "pitch font. اگر این گزینه علامتگذاری شده باشد، یک خط عمودی در ستون سطربندی، طبق "
#~ "تعریف در ویزگیهای ویرایش، کشیده خواهد شد. به یاد "
#~ "داشته باشید که نشانگر سطربندی فقط در صورتی نمایش داده میشود که از قلمی با "
#~ "گام ثابت استفاده کنید. This string allows to configure Kate's settings for the files selected "
#~ "by this mimetype using Kate variables. Almost any configuration option "
#~ "can be set, such as highlight, indent-mode, encoding, etc. For a "
#~ "full list of known variables, see the manual. این رشته اجازه پیکربندی تنظیمات Kate را برای پروندههای برگزیده توسط "
#~ "این نوع مایم، با استفاده از متغیرهای Kate را میدهد. تقریباً هر گزینه "
#~ "پیکربندی میتواند تنظیم شود، نظیر مشخص کردن، حالت تورفتگی، کدبندی و غیره."
#~ "p> برای فهرست کاملی از متغیرهای ناشناخته، راهنما را ببینید. Tab "
#~| "key action (if no selection exists) Tab to "
#~| "align the current line in the current code block like in emacs, make "
#~| "Tab a shortcut to the action Align.\">More ... Tab key action (if no selection exists) Tab"
#~ "b> to align the current line in the current code block like in emacs, "
#~ "make Tab a shortcut to the action Align.\">More ..."
#~ "span> کنش "
#~ "کلید جهش )اگر گزینشی موجود نباشد( جهش با "
#~ "خط جاری در بلوک کد جاری مانند emacs، همتراز شود، جهش را میانبری "
#~ "به کنش همتراز کردن سازید.\">بیشتر... If the insertion "
#~| "point is at or before the first non-space character in the line, or if "
#~| "there is a selection, the current line is indented by the number of "
#~| "character positions specified in Indentation width. If the "
#~| "insertion point is located after the first non-space character in the "
#~| "line and there is no selection, white space is inserted so that the next "
#~| "tab postion is reached: if the option Insert spaces instead of "
#~| "tabulators in the section Editing is enabled, spaces are "
#~| "inserted; otherwise, a single tabulator is inserted."
#~ msgid ""
#~ "If this option is selected, the Tab key either indents the current "
#~ "line or advances to the next tab position. If the insertion point is "
#~ "at or before the first non-space character in the line, or if there is a "
#~ "selection, the current line is indented by the number of character "
#~ "positions specified in Indentation width. If the insertion "
#~ "point is located after the first non-space character in the line and "
#~ "there is no selection, white space is inserted so that the next tab "
#~ "position is reached: if the option Insert spaces instead of "
#~ "tabulators in the section Editing is enabled, spaces are "
#~ "inserted; otherwise, a single tabulator is inserted."
#~ msgstr ""
#~ "اگر این گزینه انتخاب شود، کلید جهش یا خط جاری را دندانه میگذارد، "
#~ "یا به موقعیت بعدیِ جهش پیشروی میکند. اگر نقطهٔ درج روی یا قبل از نخستین "
#~ "نویسهٔ غیرفاصلهٔ خط باشد، یا اگر انتخابی وجود داشته باشد، خط جاری به تعداد "
#~ "موقعیتهای نویسهٔ تعیینشده در عرض دندانهگذاری دندانهگذاری میشود. "
#~ "اگر نقطهٔ درج، پس از نخستین نویسهٔ غیرفاصله در خط قرار داشته باشد و انتخابی "
#~ "وجود نداشته باشد، سفیدفضا درج میشود تا به موقعیت جهش بعدی برسد: اگر گزینهٔ "
#~ "درج فاصله به جای جهشها در انتخاب ویرایش فعال باشد، فاصله "
#~ "درج میشود؛ در غیر این صورت، یک جهش تنها درج میشود."
#, fuzzy
#~| msgid "Increase indentation level if in leading blank space"
#~ msgid "Increase indentation level if in l&eading blank space"
#~ msgstr "افزایش سطح تورفتگی در صورت منجرشدن به فضای خالی"
#, fuzzy
#~| msgid " characters"
#~ msgid " character"
#~ msgid_plural " characters"
#~ msgstr[0] " نویسه"
#~ msgid "Indentation"
#~ msgstr "تورفتگی"
#, fuzzy
#~ msgid "Auto Completion"
#~ msgstr "تکمیل واژه"
#~ msgid "Spellcheck"
#~ msgstr "غلطیاب"
#, fuzzy
#~| msgctxt "Language Section"
#~| msgid "Configuration"
#~ msgid "Text Navigation"
#~ msgstr "پیکربندی"
#, fuzzy
#~| msgid " characters"
#~ msgctxt "Wrap words at (value is at 20 or larger)"
#~ msgid " character"
#~ msgid_plural " characters"
#~ msgstr[0] " نویسه"
#~ msgid "Editing"
#~ msgstr " ویرایش"
#~ msgid "Editing Options"
#~ msgstr "ویرایش گزینهها"
#~ msgid "Off"
#~ msgstr "خاموش"
#~ msgid "Follow Line Numbers"
#~ msgstr "پیروی از شماره خطوط"
#~ msgid "Appearance"
#~ msgstr "ظاهر"
#~ msgid ""
#~ "You did not provide a backup suffix or prefix. Using default suffix: '~'"
#~ msgstr ""
#~ "یک پسوند یا پیشوند پشتیبان فراهم نکردید. استفاده از پسوند پیشفرض: »~«"
#~ msgid "No Backup Suffix or Prefix"
#~ msgstr "بدون پسوند یا پیشوند پشتیبان"
#~ msgid "Open/Save"
#~ msgstr "باز کردن/ذخیره"
#~ msgid "File Opening & Saving"
#~ msgstr "باز کردن و ذخیره پرونده"
#~ msgid "Highlight Download"
#~ msgstr "مشخص کردن بارگیری"
#~ msgid "Select the syntax highlighting files you want to update:"
#~ msgstr ""
#~ "برگزیدن نحوی که مشخصکننده پروندههایی است که میخواهید بهروزرسانی شوند:"
#~ msgid "Installed"
#~ msgstr "نصبشده"
#~ msgid "Latest"
#~ msgstr "تازهترین"
#~ msgid "Note: New versions are selected automatically."
#~ msgstr "نکته: نسخههای جدید به طور خودکار گزینش میشوند."
#~ msgid "&Install"
#~ msgstr "&نصب"
#~ msgid "&Go to line:"
#~ msgstr "&رفتن به خط:"
#, fuzzy
#~| msgid "&Section:"
#~ msgid "Dictionary:"
#~ msgstr "&بخش:"
#, fuzzy
#~| msgid "&View Difference"
#~ msgid "View &Difference"
#~ msgstr "تفاوت &نما"
#, fuzzy
#~| msgid "Reloa&d"
#~ msgid "&Reload"
#~ msgstr "&بارگذاری مجدد"
#, fuzzy
#~| msgid ""
#~| "Reload the file from disk. If you have unsaved changes, they will be "
#~| "lost."
#~ msgid "Reload the file from disk. Unsaved changes will be lost."
#~ msgstr ""
#~ "بارگذاری مجدد پرونده از دیسک. اگر تغییرهای ذخیرهنشده دارید، از دست میروند."
#, fuzzy
#~| msgid "&Save File As..."
#~ msgid "&Save As..."
#~ msgstr "&ذخیره پرونده به عنوان..."
#~ msgid "Lets you select a location and save the file again."
#~ msgstr "به شما اجازه میدهد محلی را برگزینید، و پرونده را دوباره ذخیره کنید."
#~ msgid "&Ignore"
#~ msgstr "&چشمپوشی"
#, fuzzy
#~| msgid "Ignore the changes. You will not be prompted again."
#~ msgid "Ignores the changes on disk without any action."
#~ msgstr "چشمپوشی از تغییرها. دوباره به شما اعلان میشود."
#~ msgid ""
#~ "The diff command failed. Please make sure that diff(1) is installed and "
#~ "in your PATH."
#~ msgstr ""
#~ "خرابی در فرمان diff. لطفاً، مطمئن شوید که diff (۱) نصب میشود و در مسیرتان "
#~ "است."
#~ msgid "Error Creating Diff"
#~ msgstr "خطای ایجاد Diff"
#~ msgid "Diff Output"
#~ msgstr "خروجی Diff"
#~ msgid "Text Cursor Movement"
#~ msgstr "حرکت مکاننمای متن"
#~ msgid ""
#~ "When selected, pressing the home key will cause the cursor to skip "
#~ "whitespace and go to the start of a line's text. The same applies for the "
#~ "end key."
#~ msgstr ""
#~ "وقتی برگزیده شد، فشار کلید آغازه باعث پرش مکاننما به فضای سفید و رفتن به "
#~ "آغاز متن خطی میرود. همین کار برای کلید پایان اعمال میشود."
#~ msgid "Smart ho&me and smart end"
#~ msgstr "&آغازه هوشمند و پایان هوشمند"
#~ msgid ""
#~ "Selects whether the PageUp and PageDown keys should alter the vertical "
#~ "position of the cursor relative to the top of the view."
#~ msgstr ""
#~ "انتخاب میکند که آیا کلیدهای بالابر صفحه و پایینبر صفحه باید موقعیت عمودی "
#~ "مکاننما را نسبت به نمای بالا تغییر دهد."
#~ msgid "&PageUp/PageDown moves cursor"
#~ msgstr "&بالابر صفحه/پایینبر صفحه مکاننما را حرکت میدهد"
#, fuzzy
#~| msgid "&Autocenter cursor (lines):"
#~ msgid "&Autocenter cursor:"
#~ msgstr "مرکزی کردن &خودکار مکاننما )خطوط(:"
#~ msgid ""
#~ "Sets the number of lines to maintain visible above and below the cursor "
#~ "when possible."
#~ msgstr ""
#~ "تعداد خطوطی که بالا و پایین مکاننما را در صورت امکان مرئی نگه میدارد."
#~ msgid "Disabled"
#~ msgstr "غیرفعال"
#, fuzzy
#~| msgid "Inline"
#~ msgid " lines"
#~ msgstr "درونخط"
#~ msgid "Misc"
#~ msgstr "متفرقه"
#, fuzzy
#~| msgid "Text Selection Mode"
#~ msgid "Text selection mode:"
#~ msgstr "حالت گزینش متن"
#, fuzzy
#~| msgctxt "@title:column Text style"
#~| msgid "Normal"
#~ msgid "Normal"
#~ msgstr "عادی"
#, fuzzy
#~| msgid "P&ersistent"
#~ msgid "Persistent"
#~ msgstr "&ماندگار"
#~ msgid ""
#~ " Backing up on save will cause Kate to copy the disk file to '<"
#~ "prefix><filename><suffix>' before saving changes. The "
#~ "suffix defaults to ~ and prefix is empty by default."
#~ msgstr ""
#~ " تهیهٔ پشتیبان هنگام ذخیره باعث میشود Kate پروندهٔ دیسک را قبل از ذخیرهٔ "
#~ "تغییرات، به '<prefix><filename><suffix>' رونوشت بردارد."
#~ " پسوند به ~ پیشگزیده میشود و پیشوند به طور پیشگزیده "
#~ "خالی است."
#~ msgid "Backup on Save"
#~ msgstr "پشتیبان هنگام ذخیره"
#~ msgid ""
#~ "If this option is enabled, backups for local files will be created when "
#~ "saving."
#~ msgstr ""
#~ "اگر این گزینه فعال شود، پشتیبان پروندههای محلی هنگام ذخیره ایجاد میشود."
#~ msgid "&Local files"
#~ msgstr "پرونده &محلی"
#~ msgid ""
#~ "If this option is enabled, backups for remote files will be created when "
#~ "saving."
#~ msgstr ""
#~ "اگر این گزینه فعال شود، پشتیبان پروندههای دور هنگام ذخیره ایجاد میشود."
#~ msgid "&Remote files"
#~ msgstr "پروندههای &دور"
#~ msgid "&Prefix:"
#~ msgstr "&پیشوند:"
#~ msgid "Enter the prefix to prepend to the backup file names."
#~ msgstr "پیشوندی را برای پیشآویز کردن به نام پروندههای پشتیبان وارد کنید."
#~ msgid "&Suffix:"
#~ msgstr "&پسوند:"
#~ msgid "Enter the suffix to append to the backup file names."
#~ msgstr "پسوندی را برای پیوست کردن به نام پروندههای پشتیبان وارد کنید."
#, fuzzy
#~| msgid "New Filetype"
#~ msgid "Swap file:"
#~ msgstr "نوع جدید پرونده"
#, fuzzy
#~| msgid "Disabled"
#~ msgid "Disable"
#~ msgstr "غیرفعال"
#, fuzzy
#~| msgid "Folder Config File"
#~ msgid "Directory for swp files"
#~ msgstr "پرونده Config پوشه"
#, fuzzy
#~| msgid "as"
#~ msgid "s"
#~ msgstr "به عنوان"
#~ msgid "&Encoding:"
#~ msgstr "&کدبندی:"
#, fuzzy
#~| msgid "Encoding auto&detection:"
#~ msgid "&Encoding Detection:"
#~ msgstr "&آشکارسازی خودکار کدبندی:"
#, fuzzy
#~| msgid "&Encoding:"
#~ msgid "&Fallback Encoding:"
#~ msgstr "&کدبندی:"
#~ msgid "E&nd of line:"
#~ msgstr "&انتهای خط:"
#~ msgid "UNIX"
#~ msgstr "یونیکس"
#~ msgid "DOS/Windows"
#~ msgstr "داس/ویندوز"
#~ msgid "Macintosh"
#~ msgstr "مکینتاش"
#~ msgid ""
#~ "If this option is enabled the editor will autodetect the end of line "
#~ "type. The first found end of line type will be used for the whole file."
#~ msgstr ""
#~ "اگر این گزینه فعال باشد، ویرایشگر انتهای تحریر خط را به طور خودکار "
#~ "میشناسد. اولین انتهای پیداشده تحریر خط، برای تمام پرونده استفاده میشود."
#~ msgid "A&utomatic end of line detection"
#~ msgstr "آشکارسازی &خودکار انتهای خط"
#~ msgid "Unlimited"
#~ msgstr "نامحدود"
#, fuzzy
#~| msgid "Automatic Cleanups on Load/Save"
#~ msgid "Automatic Cleanups on Save"
#~ msgstr "پاکسازیهای خودکار هنگام بار کردن/ذخیره"
#, fuzzy
#~| msgid "Re&move trailing spaces"
#~ msgid "Re&move trailing spaces:"
#~ msgstr "&حذف فضاهای پشتبندی"
#, fuzzy
#~| msgid "Reverse"
#~ msgid "Never"
#~ msgstr "معکوس"
#, fuzzy
#~| msgid "Scroll Line Up"
#~ msgid "On Modified Lines"
#~ msgstr "لغزش خط به بالا"
#, fuzzy
#~ msgid "In Entire Document"
#~ msgstr "سند سطربندی &واژه"
#~ msgid ""
#~ "If this option is checked, the text lines will be wrapped at the view "
#~ "border on the screen."
#~ msgstr ""
#~ "اگر این گزینه علامت زده شود، خطوط متن در لبه نمای موجود بر روی پرده "
#~ "سطربندی خواهند شد."
#~ msgid "&Dynamic Word Wrap"
#~ msgstr "سطربندی &پویای واژه"
#~ msgid "Dynamic &word wrap indicators (if applicable):"
#~ msgstr "شاخصهای سطربندی پویای &واژه )اگر کاربردی باشد("
#~ msgid "Choose when the Dynamic Word Wrap Indicators should be displayed."
#~ msgstr "انتخاب زمانی که شاخصهای سطربندی پویای واژه باید نمایش داده شوند."
#~ msgid "Align dynamically wrapped lines to indentation depth:"
#~ msgstr "همتراز کردن پویای خطوط سطربندیشده با عمق تورفتگی."
#~ msgid ""
#~ " Enables the start of dynamically wrapped lines to be aligned "
#~ "vertically to the indentation level of the first line. This can help to "
#~ "make code and markup more readable. Additionally, this allows you "
#~ "to set a maximum width of the screen, as a percentage, after which "
#~ "dynamically wrapped lines will no longer be vertically aligned. For "
#~ "example, at 50%, lines whose indentation levels are deeper than 50% of "
#~ "the width of the screen will not have vertical alignment applied to "
#~ "subsequent wrapped lines. ابتدای خطوط سطربندیشده به طور پویا را قادر میسازد تا با سطح تورفتگی خط "
#~ "نخست، به طور عمودی همتراز شوند. این میتواند به خواناتر کردن کد و "
#~ "نشانگذاری کمک کند. به علاوه، این به شما اجازه میدهد تا عرض بیشینهٔ "
#~ "صفحه را، به درصد تنظیم کنید، که بعد از آن، خطوط سطربندیشده به طور پویا "
#~ "دیگر به طور عمودی همتراز نمیشوند. مثلاً در ۵۰٪، خطوطی که سطح تورفتگیشان "
#~ "عمیقتر از ۵۰٪ از عرض صفحه است، همترازی عمودی را به خطوط سطربندیشدهٔ بعدی "
#~ "اعمال نمیکنند. If enabled, line numbers will be printed on the left side of the "
#~ "page(s). اگر فعال شود، شماره خطوط در سمت چپ صفحه)ها( چاپ میشود. Print a box displaying typographical conventions for the document "
#~ "type, as defined by the syntax highlighting being used. چاپ جعبهای که در حال نمایش قراردادهای چاپی برای نوع سند است، همانطور "
#~ "که توسط مشخص کردن نحوی که استفاده میشود، تعریف شد. Format of the page header. The following tags are supported: قالب سرآیند صفحه. برچسبهای زیر پشتیبانی میشوند: Format of the page footer. The following tags are supported: قالب زیرنویس صفحه. برچسبهای زیر پشتیبانی میشوند: If enabled, the background color of the editor will be used."
#~ "p> This may be useful if your color scheme is designed for a dark "
#~ "background. اگر فعال شود، از رنگ زمینه ویرایشگر استفاده خواهد شد. اگر "
#~ "طرحواره رنگتان برای یک زمینه تیره طرح شود، ممکن است این مفید باشد. If enabled, a box as defined in the properties below will be drawn "
#~ "around the contents of each page. The Header and Footer will be separated "
#~ "from the contents with a line as well. اگر فعال شود، همانطور که در ویژگیهای زیر تعریف شده، جعبهای پیرامون "
#~ "محتویات هر صفحه ترسیم خواهد شد. سرآیند و زیرنویس هم توسط خطی از محتویات "
#~ "جدا میشوند. Sets the background color of the editing area. رنگ زمینه ناحیه ویرایش را تنظیم میکند. Sets the background color of the selection. To set the text "
#~| "color for selected text, use the \"Configure Highlighting\" "
#~| "dialog. Sets the background color of the selection. To set the text "
#~ "color for selected text, use the "Configure Highlighting"
#~ "b>" dialog. رنگ زمینه گزینش را تنظیم میکند. برای تنظیم رنگ متن برای متن "
#~ "برگزیده از محاوره ، »پیکربندی مشخص کردن« استفاده کنید. Sets the background color of the currently active line, which means "
#~ "the line where your cursor is positioned. رنگ زمینه خط فعال فعلی را تنظیم میکند، یعنی خطی که مکاننمای شما قرار "
#~ "دارد. Sets the background color of the editing area. Sets the background color of search results. رنگ زمینه ناحیه ویرایش را تنظیم میکند. Sets the background color of the editing area. Sets the background color of replaced text. رنگ زمینه ناحیه ویرایش را تنظیم میکند. Sets the background color of the editing area. Sets the background color of the icon border. رنگ زمینه ناحیه ویرایش را تنظیم میکند. This color will be used to draw the line numbers (if enabled) and the "
#~| "lines in the code-folding pane. This color will be used to draw the line numbers (if enabled). این رنگ برای ترسیم شماره خطوط )در صورت فعال بودن( و خطوط در قطعه "
#~ "تاکردن کد، استفاده میشود. This color will be used to draw the line numbers (if enabled) and the "
#~| "lines in the code-folding pane. This color will be used to draw the number of the current line (if "
#~ "enabled). این رنگ برای ترسیم شماره خطوط )در صورت فعال بودن( و خطوط در قطعه "
#~ "تاکردن کد، استفاده میشود. This color will be used to draw the line numbers (if enabled) and the "
#~| "lines in the code-folding pane. This color will be used to draw the line between line numbers and the "
#~ "icon borders, if both are enabled. این رنگ برای ترسیم شماره خطوط )در صورت فعال بودن( و خطوط در قطعه "
#~ "تاکردن کد، استفاده میشود. Sets the color of Word Wrap-related markers: رنگ نشانگرهای مربوط به سطربندی واژه را تنظیم میکند: Sets the background color of the editing area. Sets the color of the code folding bar. رنگ زمینه ناحیه ویرایش را تنظیم میکند. Sets the color of the tabulator marks. Sets the color of the line modification marker for modified lines. رنگ نشانهای جدولبند را تنظیم میکند. Sets the color of the tabulator marks. Sets the color of the line modification marker for saved lines. رنگ نشانهای جدولبند را تنظیم میکند. Sets the color of the tabulator marks. Sets the color of the line that is used to indicate spelling mistakes."
#~ " رنگ نشانهای جدولبند را تنظیم میکند. Sets the color of the tabulator marks. رنگ نشانهای جدولبند را تنظیم میکند. Sets the color of the tabulator marks. Sets the color of the vertical indentation lines. رنگ نشانهای جدولبند را تنظیم میکند. Sets the bracket matching color. This means, if you place the cursor e."
#~ "g. at a (, the matching ) will be highlighted with this "
#~ "color. رنگ کروشه مطابق را تنظیم میکند. یعنی، اگر مکاننما را مثلاً در ( "
#~ "قرار دهید، ) مطابق با این رنگ مشخص میشود. Sets the background color of the selected marker type. Note"
#~| "b>: The marker color is displayed lightly because of transparency. Sets the background color of mark type. Note: The marker "
#~ "color is displayed lightly because of transparency. رنگ زمینه را برای نوع نشانگرهای برگزیده تنظیم میکند. نکته"
#~ "b>: رنگ نشانگر به خاطر شفافیت، روشنتر به نظر میرسد. This list displays the default styles for the current schema and "
#~ "offers the means to edit them. The style name reflects the current style "
#~ "settings. To edit the colors, click the colored squares, or select "
#~ "the color to edit from the popup menu. You can unset the Background "
#~ "and Selected Background colors from the popup menu when appropriate. این فهرست، سبک پیشفرضها را برای طرحواره جاری نمایش میدهد، و وسایلی را "
#~ "برای ویرایش آنها ارائه میدهد. نام سبک، تنظیمات سبک جاری را منعکس میکند.."
#~ "p> برای ویرایش رنگها، مربعهای رنگی را فشار دهید، یا برای ویرایش از "
#~ "گزینگان بالاپر، رنگی را برگزینید. میتوانید زمینه و رنگهای زمینه "
#~ "برگزیده را در زمان مناسب از گزینگان بالاپر باز نشانید. This list displays the contexts of the current syntax highlight mode "
#~ "and offers the means to edit them. The context name reflects the current "
#~ "style settings. To edit using the keyboard, press <"
#~ "SPACE> and choose a property from the popup menu. To "
#~ "edit the colors, click the colored squares, or select the color to edit "
#~ "from the popup menu. You can unset the Background and Selected "
#~ "Background colors from the context menu when appropriate. این فهرست، متنهای حالت مشخص نحو جاری را نمایش میدهد، و وسایلی را برای "
#~ "ویرایش آنها ارائه میدهد. نام متن، تنظیمات سبک جاری را منعکس میکند."
#~ "p> برای ویرایش کاربرد صفحه کلید، <SPACE> را فشار "
#~ "دهید و یک ویژگی را از گزینگان بالاپر انتخاب کنید. برای ویرایش "
#~ "رنگها، مربعهای رنگی را فشار دهید، یا برای ویرایش رنگ را از گزینگان بالاپر "
#~ "برگزینید. میتوانید زمینه و رنگهای زمینه برگزیده را در زمان مناسب از "
#~ "گزینگان متن باز نشانید. Open the Print dialog to print the current document. Sets the background color of the editing area. رنگ زمینه ناحیه ویرایش را تنظیم میکند. For help on individual commands, do برای کمک در مورد فرمانهای شخصی، This is the Katepart command line. این خط فرمان Katepart است. Sets the background color of the selection. To set the text "
#~ "color for selected text, use the \"Configure Highlighting\" dialog."
#~ " رنگ زمینه گزینش را تنظیم میکند. برای تنظیم رنگ متن برای متن "
#~ "برگزیده از محاوره ، »پیکربندی مشخص کردن« استفاده کنید. Select the marker type you want to change. نوع نشانگذاری را که میخواهید تغییر دهید را انتخاب کنید. Sets the background color of the selected marker type. Note"
#~ "b>: The marker color is displayed lightly because of transparency. رنگ زمینه را برای نوع نشانگرهای برگزیده تنظیم میکند. نکته"
#~ "b>: رنگ نشانگر به خاطر شفافیت، روشنتر به نظر میرسد. This color will be used to draw the line numbers (if enabled) and the "
#~ "lines in the code-folding pane. این رنگ برای ترسیم شماره خطوط )در صورت فعال بودن( و خطوط در قطعه "
#~ "تاکردن کد، استفاده میشود. When on, moving the insertion cursor using the Left and "
#~ "Right keys will go on to previous/next line at beginning/end of "
#~ "the line, similar to most editors. When off, the insertion cursor "
#~ "cannot be moved left of the line start, but it can be moved off the line "
#~ "end, which can be very handy for programmers. هنگام روشن بودن، حرکت مکاننمای درج با استفاده از کلیدهای چپ و "
#~ "راست به خط قبلی/بعدی در ابتدا/انتهای خط میرود، مشابه اغلب "
#~ "ویرایشگرها. هنگام خاموش بودن، مکاننمای درج نمیتواند آغاز خط را رها "
#~ "کند ولی میتواند انتهای خط را کنار بگذارد، که برای برنامهتویسان بسیار "
#~ "سودمند است. Tab "
#~| "key action (if no selection exists) Tab*.txt; *.text"
#~ "code>. The string is a semicolon-separated list of masks."
#~ msgstr ""
#~ "نقاب نویسههای عام اجازه انتخاب پروندهها بر اساس نام پرونده را میدهد. نقاب "
#~ "نوعی، از یک ستاره و نام پرونده استفاده میکند، برای مثال *.txt; *."
#~ "text. رشته فهرستی جداشده با نقطه-واوک از نقابهاست."
#~ msgid "MIME &types:"
#~ msgstr "&انواع مایم:"
#~ msgid ""
#~ "The mime type mask allows to select files by mimetype. The string is a "
#~ "semicolon-separated list of mimetypes, for example text/plain; text/"
#~ "english."
#~ msgstr ""
#~ "نوع مایم اجازه انتخاب پروندهها بر اساس نوع مایم را میدهد. رشته فهرستی "
#~ "جداشده با نقطه-واوک از انواع مایم است، برای مثال text/plain; text/"
#~ "english."
#~ msgid "Displays a wizard that helps you easily select mimetypes."
#~ msgstr ""
#~ "جادوگری را که شما را انتخاب انواع مایم به راحتی کمک میکند، را نمایش میدهد."
#~ msgid "P&riority:"
#~ msgstr "&اولویت:"
#~ msgid ""
#~ "Sets priority for this file type. If more than one file type selects the "
#~ "same file, the one with the highest priority will be used."
#~ msgstr ""
#~ "اولویت را برای این نوع پرونده تنظیم میکند. اگر بیش از یک نوع پرونده همان "
#~ "پرونده را انتخاب کند، موردی با اولویت بالاتر استفاده خواهد شد."
#~ msgid "Download Highlighting Files..."
#~ msgstr "بارگیری پروندههای مشخص..."
#~ msgid "Default indentation mode:"
#~ msgstr "حالت تورفتگی پیشفرض:"
#~ msgid ""
#~ "This is a list of available indentation modes. The specified indentation "
#~ "mode will be used for all new documents. Be aware that it is also "
#~ "possible to set the indentation mode with document variables, modes or a ."
#~ "kateconfig file."
#~ msgstr ""
#~ "این فهرستی از حالتهای تورفتگی موجود است. حالت تورفتگی مشخصشده برای همه "
#~ "سندهای جدید استفاده میشود. آگاه باشید که تنظیم حالت تورفتگی با متغیرهای "
#~ "سند، حالتها یا پرونده kateconfig. نیز ممکن است."
#, fuzzy
#~| msgid "Indentation"
#~ msgid "Indent using"
#~ msgstr "تورفتگی"
#, fuzzy
#~| msgid "Tabulators"
#~ msgid "&Tabulators"
#~ msgstr "جدولبندها"
#, fuzzy
#~| msgid "Replace"
#~ msgid "&Spaces"
#~ msgstr "جایگزینی"
#, fuzzy
#~| msgid "Indentation width:"
#~ msgid "&Indentation width:"
#~ msgstr "عرض تورفتگی:"
#, fuzzy
#~| msgid "Tabulators"
#~ msgid "Tabulators &and Spaces"
#~ msgstr "جدولبندها"
#~ msgid "Tab wi&dth:"
#~ msgstr "&عرض تب:"
#~ msgid ""
#~ "The indentation width is the number of spaces which is used to indent a "
#~ "line. If the option Insert spaces instead of tabulators in the "
#~ "section Editing is disabled, a Tab character is inserted if "
#~ "the indentation is divisible by the tab width."
#~ msgstr ""
#~ "عرض تورفتگی تعداد فاصلههایی است که برای تورفتن خط استفاده میشود. اگر "
#~ "گزینه درج فاصلهها به جای جدولبندی در بخش ویرایش فعال شود، "
#~ "نویسه جهش در صورتی که تورفتگی قابل تقسیم بر عرض جهش باشد، درج "
#~ "میشود."
#~ msgid "Indentation Properties"
#~ msgstr "ویژگیهای تورفتگی"
#~ msgid ""
#~ "If this option is disabled, changing the indentation level aligns a line "
#~ "to a multiple of the width specified in Indentation width."
#~ msgstr ""
#~ "اگر این گزینه فعال شود، تغییر سطح تورفتگی، خطی را به چند عرض مشخصشده در "
#~ "عرض تورفتگی همتراز میکند."
#, fuzzy
#~| msgid "Keep extra spaces"
#~ msgid "&Keep extra spaces"
#~ msgstr "حفظ فاصلههای اضافی"
#~ msgid ""
#~ "If this option is selected, pasted code from the clipboard is indented. "
#~ "Triggering the undo-action removes the indentation."
#~ msgstr ""
#~ "اگر این گزینه برگزیده شود، کد چسباندهشده از تخته یادداشت تو میرود. زدن "
#~ "ضامن کنش واگرد تورفتگی را حذف میکند."
#, fuzzy
#~| msgid "Adjust indentation of code pasted from the clipboard"
#~ msgid "Adjust indentation of code &pasted from the clipboard"
#~ msgstr "میزان کردن تورفتگی کد چسباندهشده از تخته یادداشت"
#~ msgid "Indentation Actions"
#~ msgstr "کنشهای تورفتگی"
#~ msgid ""
#~ "If this option is selected, the Backspace key decreases the "
#~ "indentation level if the cursor is located in the leading blank space of "
#~ "a line."
#~ msgstr ""
#~ "اگر این گزینه برگزیده شود، کلید پسبر در صورتی که مکاننما در جلوی "
#~ "فاصله خالی خطی محلیابی شود، سطح تورفتگی را کاهش میدهد."
#, fuzzy
#~| msgid "Backspace key in leading blank space unindents"
#~ msgid "&Backspace key in leading blank space unindents"
#~ msgstr "کلید پسبر در جلوی فاصله خالی بدون تورفتگی است"
#, fuzzy
#~| msgid ""
#~| "\n"
#~| "
Check if you have read access to this file."
#~ msgstr ""
#~ "پرونده %1 را نمیتوان بارگذاری کرد، زیرا امکان خواندن به واسطه آن وجود "
#~ "نداشت.\n"
#~ "\n"
#~ "اگر دستیابی به این پرونده را خواندهاید، این را علامت بزنید."
#~ msgid ""
#~ "The file %1 could not be loaded, as it was not possible to read from it.\n"
#~ "\n"
#~ "Check if you have read access to this file."
#~ msgstr ""
#~ "پرونده %1 را نمیتوان بارگذاری کرد، زیرا امکان خواندن به واسطه آن وجود "
#~ "نداشت.\n"
#~ "\n"
#~ "اگر دستیابی به این پرونده را خواندهاید، این را علامت بزنید."
#, fuzzy
#~ msgid ""
#~ "The file %1 was opened with %2 encoding but contained invalid characters."
#~ "
It is set to read-only mode, as saving might destroy its content."
#~ "
Either reopen the file with the correct encoding chosen or enable "
#~ "the read-write mode again in the tools menu to be able to edit it."
#~ msgstr ""
#~ "پرونده %1 با کدبندی UTF-8 باز نمیشود، ولی شامل نویسههای نامعتبر است. به "
#~ "حالت فقط خواندنی تنظیم می شود، چرا که ذخیره ممکن است محتوای آن را خراب "
#~ "کند. یا پرونده را با انتخاب کدبندی درست مجدداً باز نموده یا حالت خواندنی "
#~ "نوشتنی را در گزینگان فعال سازید تا قادر به ویرایش آن باشید."
#, fuzzy
#~ msgid ""
#~ "The file %1 was opened with %2 encoding but contained invalid characters. "
#~ "It is set to read-only mode, as saving might destroy its content. Either "
#~ "reopen the file with the correct encoding chosen or enable the read-write "
#~ "mode again in the tools menu to be able to edit it."
#~ msgstr ""
#~ "پرونده %1 با کدبندی UTF-8 باز نمیشود، ولی شامل نویسههای نامعتبر است. به "
#~ "حالت فقط خواندنی تنظیم می شود، چرا که ذخیره ممکن است محتوای آن را خراب "
#~ "کند. یا پرونده را با انتخاب کدبندی درست مجدداً باز نموده یا حالت خواندنی "
#~ "نوشتنی را در گزینگان فعال سازید تا قادر به ویرایش آن باشید."
#~ msgid ""
#~ "Do you really want to save this unmodified file? You could overwrite "
#~ "changed data in the file on disk."
#~ msgstr ""
#~ "واقعاً میخواهید این پرونده تغییر دادهنشده را ذخیره کنید؟ میتوانستید داده "
#~ "تغییر دادهشده را در پرونده موجود در دیسک جاینوشت کنید."
#~ msgid "Trying to Save Unmodified File"
#~ msgstr "سعی برای ذخیره پرونده تغییر دادهنشده"
#~ msgid "Save Nevertheless"
#~ msgstr "با این حال ذخیره شود"
#~ msgid ""
#~ "Do you really want to save this file? Both your open file and the file on "
#~ "disk were changed. There could be some data lost."
#~ msgstr ""
#~ "واقعاً میخواهید این پرونده را ذخیره کنید؟ هم پرونده بازتان و هم پرونده "
#~ "موجود در دیسک تغییر داده شدند. ممکن بود مقداری داده از بین برود."
#~ msgid "Possible Data Loss"
#~ msgstr "اتلاف احتمالی داده"
#~ msgid ""
#~ "The selected encoding cannot encode every unicode character in this "
#~ "document. Do you really want to save it? There could be some data lost."
#~ msgstr ""
#~ "کدبندی برگزیده نمیتواند هر نویسه یونیکد موجود در این پرونده را کدبندی "
#~ "کند. واقعاً میخواهید آن را ذخیره کنید؟ ممکن بود مقداری از داده از بین برود."
#~ msgid ""
#~ "The document could not be saved, as it was not possible to write to %1.\n"
#~ "\n"
#~ "Check that you have write access to this file or that enough disk space "
#~ "is available."
#~ msgstr ""
#~ "سند را نمیتوان ذخیره کرد، زیرا امکان نوشتن در %1 نبود.\n"
#~ "\n"
#~ "بررسی کنید که دستیابی به این پرونده را نوشته باشید، یا این که فضای کافی "
#~ "در دیسک موجود باشد."
#~ msgid ""
#~ "For file %1 no backup copy could be created before saving. If an error "
#~ "occurs while saving, you might lose the data of this file. A reason could "
#~ "be that the media you write to is full or the directory of the file is "
#~ "read-only for you."
#~ msgstr ""
#~ "رونوشت پشتیبان برای پرونده %1 نتوانست قبل از ذخیره ایجاد شود. اگر هنگام "
#~ "ذخیره خطایی رخ دهد، ممکن است دادههای این پرونده را از دست بدهید. یک دلیل "
#~ "می تواند این باشد که رسانهای که در آن مینویسید پر باشد یا فهرست راهنمای "
#~ "پرونده برای شما فقط خواندنی است."
#~ msgid "Failed to create backup copy."
#~ msgstr "خرابی در ایجاد رونوشت پشتیبان."
#~ msgid "Try to Save Nevertheless"
#~ msgstr "با این وجود سعی در ذخیره"
#~ msgid ""
#~ "Do you really want to continue to close this file? Data loss may occur."
#~ msgstr ""
#~ "واقعاً میخواهید به بستن این پرونده ادامه دهید؟ ممکن است اتلاف داده صورت "
#~ "بگیرد."
#~ msgid "Close Nevertheless"
#~ msgstr "با این حال بسته شود"
#~ msgid "Save File"
#~ msgstr "ذخیره پرونده"
#~ msgid "Save failed"
#~ msgstr "خرابی در ذخیره"
#~ msgid "What do you want to do?"
#~ msgstr "میخواهید چه کار کنید؟"
#~ msgid "File Was Changed on Disk"
#~ msgstr "پرونده موجود در دیسک تغییر داده شد"
#~ msgid "&Reload File"
#~ msgstr "&بارگذاری مجدد پرونده"
#~ msgid "&Ignore Changes"
#~ msgstr "&چشمپوشی از تغییرات"
#, fuzzy
#~| msgid "Save File"
#~ msgid "Save Copy of File"
#~ msgstr "ذخیره پرونده"
#~ msgid "The file '%1' was modified by another program."
#~ msgstr "پرونده »%1« توسط برنامه دیگری تغییر داده شد."
#~ msgid "The file '%1' was created by another program."
#~ msgstr "پرونده »%1« توسط برنامه دیگری ایجاد شد."
#~ msgid "The file '%1' was deleted by another program."
#~ msgstr "پرونده »%1« توسط برنامه دیگری حذف شد."
#~ msgid ""
#~ "A file named \"%1\" already exists. Are you sure you want to overwrite it?"
#~ msgstr ""
#~ "در حال حاضر پروندهای با نام »%1« موجود است. مطمئن هستید که میخواهید آن "
#~ "را جاینوشت کنید؟"
#~ msgid "Overwrite File?"
#~ msgstr "پرونده جاینوشت شود؟"
#, fuzzy
#~ msgid "Close Document"
#~ msgstr "سند سطربندی &واژه"
#, fuzzy
#~| msgid "E&ncoding"
#~ msgid "recording"
#~ msgstr "&رمزبندی"
#~ msgid "
"
#~ msgid ""
#~ "
"
#~ msgstr ""
#~ "
"
#~ msgid "
"
#~ msgstr ""
#~ "
"
#, fuzzy
#~| msgid "&Code Folding"
#~ msgid "Code Folding"
#~ msgstr "تازنی &کد"
#, fuzzy
#~| msgid "
"
#~ msgstr ""
#~ "%1:: نحو نادرست. خصیصه )%2 ( با نام نمادی نشانی داده نمیشود
"
#~ msgid "%1: Deprecated syntax. Context %2 has no symbolic name
"
#~ msgstr "%1: نحو نادرست. متن %2 نام نمادی ندارد
"
#~ msgid ""
#~ "%1:Deprecated syntax. Context %2 not addressed by a symbolic name"
#~ msgstr "%1: نحو نادرست. متن %2 توسط نام نمادی، نشانی داده نمیشود"
#~ msgid ""
#~ "There were warning(s) and/or error(s) while parsing the syntax "
#~ "highlighting configuration."
#~ msgstr ""
#~ "اخطار)ها( و/یا خطا)ها( هنگام تجزیه پیکربندی مشخص کردن نحو وجود داشت."
#~ msgid "Kate Syntax Highlighting Parser"
#~ msgstr "تجزیهگر مشخصکننده نحو Kate"
#~ msgid ""
#~ "Since there has been an error parsing the highlighting description, this "
#~ "highlighting will be disabled"
#~ msgstr ""
#~ "از آنجا که خطای تجزیه مشخصکننده توصیف وجود داشته است، این مشخصکننده "
#~ "غیرفعال میشود"
#~ msgid ""
#~ "%1: Specified multiline comment region (%2) could not be "
#~ "resolved
"
#~ msgstr "%1: منطقه توضیح چند خطی مشخصشده )%2( نتوانست تفکیک شود
"
#~ msgid "Unable to open %1"
#~ msgstr "قادر به باز کردن %1 نیست"
#~ msgid ""
#~ "
has been detected in the file %1 at %2/%3"
#~ "qt>"
#~ msgstr "
در پرونده %1 در %2/%3 آشکار شده است
This is a static word wrap, meaning it is not updated when the "
#~ "view is resized."
#~ msgstr ""
#~ "استفاده از این فرمان برای سطربندی تمام خطوط سند جاری که برای متناسب بودن "
#~ "در این نما عرض طویلتری نسبت به عرض نمای جاری دارند.
این، یک "
#~ "سطربندی ایستای واژه است و به این معناست که زمانی که نما تغییر اندازه "
#~ "مییابد، بهروزرسانی نمیشود."
#~ msgid "&Clean Indentation"
#~ msgstr "&پاک کردن تورفتگی"
#, fuzzy
#~ msgid ""
#~ "Use this to clean the indentation of a selected block of text (only tabs/"
#~ "only spaces).
You can configure whether tabs should be honored "
#~ "and used or replaced with spaces, in the configuration dialog."
#~ msgstr ""
#~ "استفاده از این برای پاک کردن تورفتگی بلوک برگزیده متن )فقط تبها/فقط "
#~ "فاصلهها(
در محاوره پیکربندی میتوانید پیکربندی کنید، که آیا "
#~ "تبها باید پذیرفته و استفاده شوند، یا با فاصله جایگزین شوند."
#~ msgid "&Align"
#~ msgstr "&همتراز کردن"
#~ msgid ""
#~ "Use this to align the current line or block of text to its proper indent "
#~ "level."
#~ msgstr ""
#~ "استفاده از این برای همتراز کردن خط جاری یا بلوک جاری متن در سطح صحیح "
#~ "تورفتگی آن."
#~ msgid "C&omment"
#~ msgstr "&توضیح"
#~ msgid ""
#~ "This command comments out the current line or a selected block of text."
#~ "
The characters for single/multiple line comments are defined "
#~ "within the language's highlighting."
#~ msgstr ""
#~ "این فرمان، خط جاری یا بلوک برگزیده متن را توضیح میدهد.
نویسهها "
#~ "برای توضیحات خط تنها/چندگانه در مشخص کردن زبان تعریف میشوند."
#, fuzzy
#~| msgid "Move to Previous Line"
#~ msgid "Go to previous editing line"
#~ msgstr "حرکت به خط قبلی"
#, fuzzy
#~| msgid "Select to Next Line"
#~ msgid "Go to next editing line"
#~ msgstr "برگزیدن خط بعدی"
#~ msgid "Unco&mment"
#~ msgstr "&بدون توضیح"
#~ msgid ""
#~ "This command removes comments from the current line or a selected block "
#~ "of text.
The characters for single/multiple line comments are "
#~ "defined within the language's highlighting."
#~ msgstr ""
#~ "این فرمان، توضیحات را از خط جاری یا بلوک برگزیده متن حذف میکند.
نویسهها برای توضیحات خط تنها/چندگانه در مشخص کردن زبان تعریف میشوند."
#, fuzzy
#~| msgctxt "@item:intable Text context"
#~| msgid "Comment"
#~ msgid "Toggle Comment"
#~ msgstr "توضیح"
#~ msgid "&Read Only Mode"
#~ msgstr "حالت فقط &خواندنی"
#~ msgid "Lock/unlock the document for writing"
#~ msgstr "قفل کردن/باز کردن سند برای نوشتن"
#~ msgid "Uppercase"
#~ msgstr "حروف بزرگ"
#~ msgid ""
#~ "Convert the selection to uppercase, or the character to the right of the "
#~ "cursor if no text is selected."
#~ msgstr ""
#~ "اگر هیچ متنی برگزیده نشود، گزینش را به حروف بزرگ تبدیل میکند، یا نویسه را "
#~ "به سمت راست مکاننما میبرد."
#~ msgid "Lowercase"
#~ msgstr "حروف کوچک"
#~ msgid ""
#~ "Convert the selection to lowercase, or the character to the right of the "
#~ "cursor if no text is selected."
#~ msgstr ""
#~ "اگر هیچ متنی انتخاب نشود، گزینش را به حروف کوچک تبدیل میکند، یا نویسه را "
#~ "به سمت راست مکاننما میبرد."
#~ msgid "Capitalize"
#~ msgstr "با حروف درشت نوشتن"
#~ msgid ""
#~ "Capitalize the selection, or the word under the cursor if no text is "
#~ "selected."
#~ msgstr ""
#~ "اگر هیچ متنی انتخاب نشود، گزینش را با حروف درشت مینویسد، یا واژه را به "
#~ "زیر مکاننما میبرد."
#~ msgid "Join Lines"
#~ msgstr "پیوند خطوط"
#~ msgid "Invoke Code Completion"
#~ msgstr "درخواست تکمیل کد"
#~ msgid ""
#~ "Manually invoke command completion, usually by using a shortcut bound to "
#~ "this action."
#~ msgstr ""
#~ "درخواست تکمیل فرمان به صورت دستی، معمولاً با استفاده از میانبر محدود به "
#~ "این کنش."
#~ msgid "Print the current document."
#~ msgstr "چاپ سند جاری."
#, fuzzy
#~| msgid "Print the current document."
#~ msgid "Show print preview of current document"
#~ msgstr "چاپ سند جاری."
#~ msgid "Reloa&d"
#~ msgstr "&بارگذاری مجدد"
#~ msgid "Reload the current document from disk."
#~ msgstr "بارگذاری مجدد سند جاری از دیسک."
#~ msgid "Save the current document to disk, with a name of your choice."
#~ msgstr "سند جاری را با نام دلخواه خود در دیسک ذخیره کنید."
#, fuzzy
#~| msgid "&Save File As..."
#~ msgid "Save &Copy As..."
#~ msgstr "&ذخیره پرونده به عنوان..."
#, fuzzy
#~| msgid "Reload the current document from disk."
#~ msgid "Save a copy of the current document to disk."
#~ msgstr "بارگذاری مجدد سند جاری از دیسک."
#~ msgid ""
#~ "This command opens a dialog and lets you choose a line that you want the "
#~ "cursor to move to."
#~ msgstr ""
#~ "این فرمان، محاورهای را باز میکند، و به شما اجازه میدهد خطی که میخواهید "
#~ "مکاننما در آن حرکت کند را انتخاب کنید."
#, fuzzy
#~| msgid "Move to Previous Line"
#~ msgid "Move to Previous Modified Line"
#~ msgstr "حرکت به خط قبلی"
#, fuzzy
#~| msgid "Move to Matching Bracket"
#~ msgid "Move upwards to the previous modified line."
#~ msgstr "حرکت به کروشه مطابق"
#, fuzzy
#~| msgid "Move to Next Line"
#~ msgid "Move to Next Modified Line"
#~ msgstr "حرکت به خط بعدی"
#~ msgid "&Configure Editor..."
#~ msgstr "&پیکربندی ویرایشگر..."
#~ msgid "Configure various aspects of this editor."
#~ msgstr "پیکربندی جنبههای مختلف این ویرایشگر."
#~ msgid "&Mode"
#~ msgstr "&حالت"
#, fuzzy
#~ msgid ""
#~ "Here you can choose which mode should be used for the current document. "
#~ "This will influence the highlighting and folding being used, for example."
#~ msgstr ""
#~ "در اینجا حالتی که که باید برای سند جاری استفاده شود را میتوانید انتخاب "
#~ "کنید. برای مثال مشخص کردن و تا کردن استفادهشده را تحت تأثیر قرار میدهد."
#~ msgid "&Highlighting"
#~ msgstr "&مشخص کردن"
#~ msgid "Here you can choose how the current document should be highlighted."
#~ msgstr "در اینجا میتوانید انتخاب کنید که سند جاری چطور باید مشخص شود."
#~ msgid "&Schema"
#~ msgstr "&طرحواره"
#~ msgid "&Indentation"
#~ msgstr "&تورفتگی"
#~ msgid "Select the entire text of the current document."
#~ msgstr "برگزیدن تمام متن سند جاری."
#~ msgid ""
#~ "If you have selected something within the current document, this will no "
#~ "longer be selected."
#~ msgstr "اگر چیزی را در سند جاری انتخاب کردهاید، بیشتر از این انتخاب نمیشود."
#~ msgid "Enlarge Font"
#~ msgstr "بزرگ کردن قلم"
#~ msgid "This increases the display font size."
#~ msgstr "این، اندازه نمایش قلم را افزایش میدهد."
#~ msgid "Shrink Font"
#~ msgstr "کوچک شدن قلم"
#~ msgid "This decreases the display font size."
#~ msgstr "این، اندازه نمایش قلم را کاهش میدهد."
#~ msgid "Bl&ock Selection Mode"
#~ msgstr "حالت گزینش &بلوک"
#~ msgid ""
#~ "This command allows switching between the normal (line based) selection "
#~ "mode and the block selection mode."
#~ msgstr ""
#~ "این فرمان، اجازه سودهی بین حالت گزینش عادی )مبنی بر خط( و حالت گزینش بلوک "
#~ "را میدهد."
#, fuzzy
#~| msgid "Select to End of Line"
#~ msgid "Switch to the next input mode."
#~ msgstr "برگزیدن انتهای خط"
#~ msgid "Overwr&ite Mode"
#~ msgstr "حالت &جاینوشت"
#~ msgid ""
#~ "Choose whether you want the text you type to be inserted or to overwrite "
#~ "existing text."
#~ msgstr ""
#~ "انتخاب کنید که میخواهید متنی که تحریر میکنید، درج شود یا با متن موجود "
#~ "جاینوشت شود."
#~ msgid "Dynamic Word Wrap Indicators"
#~ msgstr "شاخصهای سطربندی پویای واژه"
#~ msgid "Choose when the Dynamic Word Wrap Indicators should be displayed"
#~ msgstr "انتخاب زمانی که شاخصهای سطربندی پویای واژه باید نمایش داده شوند"
#~ msgid "&Off"
#~ msgstr "&خاموش"
#~ msgid "Follow &Line Numbers"
#~ msgstr "دنبال کردن شماره &خطوط"
#~ msgid "&Always On"
#~ msgstr "&همیشه روشن"
#~ msgid "Show Folding &Markers"
#~ msgstr "نمایش &نشانهای تازنی"
#~ msgid ""
#~ "You can choose if the codefolding marks should be shown, if codefolding "
#~ "is possible."
#~ msgstr ""
#~ "میتوانید انتخاب کنید که در صورت امکان، تازنی کد، نشانهای تازنی کد باید "
#~ "نمایش داده شوند."
#~ msgid "Show &Icon Border"
#~ msgstr "نمایش لبه &شمایل"
#~ msgid ""
#~ "Show/hide the icon border.
The icon border shows bookmark "
#~ "symbols, for instance."
#~ msgstr ""
#~ "نمایش/مخفی کردن لبه شمایل.
لبه شمایل برای مثال، نمادهای چوب "
#~ "الف را نمایش میدهد."
#~ msgid "Show &Line Numbers"
#~ msgstr "نمایش شماره &خطوط"
#~ msgid "Show/hide the line numbers on the left hand side of the view."
#~ msgstr "نمایش/مخفی کردن شماره خطوط در سمت چپ نما."
#~ msgid "Show Scroll&bar Marks"
#~ msgstr "نمایش نشانهای &میله لغزش"
#, fuzzy
#~ msgid ""
#~ "Show/hide the marks on the vertical scrollbar.
The marks show "
#~ "bookmarks, for instance."
#~ msgstr ""
#~ "نمایش/مخفی کردن نشانها در میله لغزش عمودی.
نشانها برای نمونه، "
#~ "چوب الفها را نمایش میدهند."
#, fuzzy
#~| msgid "Show Scroll&bar Marks"
#~ msgid "Show Scrollbar Mini-Map"
#~ msgstr "نمایش نشانهای &میله لغزش"
#, fuzzy
#~ msgid ""
#~ "Show/hide the mini-map on the vertical scrollbar.
The mini-map "
#~ "shows an overview of the whole document."
#~ msgstr ""
#~ "نمایش/مخفی کردن نشانها در میله لغزش عمودی.
نشانها برای نمونه، "
#~ "چوب الفها را نمایش میدهند."
#~ msgid "Show Static &Word Wrap Marker"
#~ msgstr "نمایش نشانگر &سطربندی ایستا"
#~ msgid ""
#~ "Show/hide the Word Wrap Marker, a vertical line drawn at the word wrap "
#~ "column as defined in the editing properties"
#~ msgstr ""
#~ "نمایش/مخفی کردن نشانگر سطربندی، یک خط عمودی ترسیمشده در ستون سطربندی، "
#~ "چنانکه در ویژگیهای ویرایش تعریفشده"
#~ msgid "Switch to Command Line"
#~ msgstr "سودهی به خط فرمان"
#~ msgid "Show/hide the command line on the bottom of the view."
#~ msgstr "نمایش/مخفی کردن خط فرمان در پایین نما."
#~ msgid "&End of Line"
#~ msgstr "&انتهای خط"
#~ msgid "Choose which line endings should be used, when you save the document"
#~ msgstr "انتخاب کنید که هنگام ذخیره سند، از کدام انتهای خط باید استفاده شود"
#, fuzzy
#~| msgid "UNIX"
#~ msgctxt "@item:inmenu End of Line"
#~ msgid "&UNIX"
#~ msgstr "یونیکس"
#, fuzzy
#~| msgid "DOS/Windows"
#~ msgctxt "@item:inmenu End of Line"
#~ msgid "&Windows/DOS"
#~ msgstr "داس/ویندوز"
#, fuzzy
#~| msgid "Macintosh"
#~ msgctxt "@item:inmenu End of Line"
#~ msgid "&Macintosh"
#~ msgstr "مکینتاش"
#~ msgid "E&ncoding"
#~ msgstr "&رمزبندی"
#~ msgid ""
#~ "Look up the first occurrence of a piece of text or regular expression."
#~ msgstr "مراجعه به نخستین رخداد بخشی از متن یا عبارت منظم."
#~ msgid "Find Selected"
#~ msgstr "یافتن برگزیده"
#~ msgid "Finds next occurrence of selected text."
#~ msgstr "رخداد بعدی متن برگزیده را پیدا میکند."
#~ msgid "Find Selected Backwards"
#~ msgstr "یافتن روبهعقب برگزیده"
#~ msgid "Finds previous occurrence of selected text."
#~ msgstr "رخداد قبلی متن برگزیده را پیدا میکند."
#~ msgid "Look up the next occurrence of the search phrase."
#~ msgstr "مراجعه به رخداد بعدی عبارت جستجو."
#~ msgid "Look up the previous occurrence of the search phrase."
#~ msgstr "مراجعه به رخداد قبلی عبارت جستجو."
#~ msgid ""
#~ "Look up a piece of text or regular expression and replace the result with "
#~ "some given text."
#~ msgstr ""
#~ "مراجعه به بخشی از متن یا عبارت منظم و جایگزینی مقداری از متن دادهشده به "
#~ "جای نتیجه."
#~ msgid "Automatic Spell Checking"
#~ msgstr "بررسی خودکار هجی"
#~ msgid "Change Dictionary..."
#~ msgstr "تغییر واژهنامه..."
#~ msgid "Copy as &HTML"
#~ msgstr "رونوشت به عنوان &زنگام"
#~ msgid ""
#~ "Use this command to copy the currently selected text as HTML to the "
#~ "system clipboard."
#~ msgstr ""
#~ "استفاده از این فرمان برای رونوشت متنی که اخیراً به عنوان زنگام در تخته "
#~ "یادداشت سیستم انتخاب شده است."
#, fuzzy
#~| msgid "Export File as HTML"
#~ msgid "E&xport as HTML..."
#~ msgstr "صادرات پرونده به عنوان زنگام"
#~ msgid ""
#~ "This command allows you to export the current document with all "
#~ "highlighting information into a HTML document."
#~ msgstr ""
#~ "این فرمان به شما اجازه میدهد سند جاری را با تمام اطلاعات مشخصکننده در یک "
#~ "سند زنگام صادر کنید."
#~ msgid "Move Word Left"
#~ msgstr "حرکت واژه به چپ"
#~ msgid "Select Character Left"
#~ msgstr "برگزیدن نویسه چپ"
#~ msgid "Select Word Left"
#~ msgstr "برگزیدن واژه چپ"
#~ msgid "Move Word Right"
#~ msgstr "حرکت واژه به راست"
#~ msgid "Select Character Right"
#~ msgstr "برگزیدن نویسه راست"
#~ msgid "Select Word Right"
#~ msgstr "برگزیدن واژه راست"
#~ msgid "Move to Beginning of Line"
#~ msgstr "حرکت به ابتدای سطر"
#~ msgid "Move to Beginning of Document"
#~ msgstr "حرکت به ابتدای سند"
#~ msgid "Select to Beginning of Line"
#~ msgstr "برگزیدن ابتدای خط"
#~ msgid "Select to Beginning of Document"
#~ msgstr "برگزیدن ابتدای سند"
#~ msgid "Move to End of Line"
#~ msgstr "حرکت به انتهای خط"
#~ msgid "Move to End of Document"
#~ msgstr "حرکت به انتهای سند"
#~ msgid "Select to End of Line"
#~ msgstr "برگزیدن انتهای خط"
#~ msgid "Select to End of Document"
#~ msgstr "برگزیدن انتهای سند"
#~ msgid "Select to Previous Line"
#~ msgstr "برگزیدن خط قبلی"
#~ msgid "Scroll Line Up"
#~ msgstr "لغزش خط به بالا"
#~ msgid "Move to Next Line"
#~ msgstr "حرکت به خط بعدی"
#~ msgid "Move to Previous Line"
#~ msgstr "حرکت به خط قبلی"
#, fuzzy
#~| msgid "Move Word Right"
#~ msgid "Move Cursor Right"
#~ msgstr "حرکت واژه به راست"
#, fuzzy
#~| msgid "Move Word Left"
#~ msgid "Move Cursor Left"
#~ msgstr "حرکت واژه به چپ"
#~ msgid "Select to Next Line"
#~ msgstr "برگزیدن خط بعدی"
#~ msgid "Scroll Line Down"
#~ msgstr "لغزش خط به پایین"
#~ msgid "Scroll Page Up"
#~ msgstr "لغزش صفحه به بالا"
#~ msgid "Select Page Up"
#~ msgstr "برگزیدن صفحه بالا"
#~ msgid "Move to Top of View"
#~ msgstr "حرکت به بالای نما"
#~ msgid "Select to Top of View"
#~ msgstr "برگزیدن بالای نما"
#~ msgid "Scroll Page Down"
#~ msgstr "لغزش صفحه به پایین"
#~ msgid "Select Page Down"
#~ msgstr "برگزیدن صفحه پایین"
#~ msgid "Move to Bottom of View"
#~ msgstr "حرکت به پایین نما"
#~ msgid "Select to Bottom of View"
#~ msgstr "برگزیدن پایین نما"
#~ msgid "Move to Matching Bracket"
#~ msgstr "حرکت به کروشه مطابق"
#~ msgid "Select to Matching Bracket"
#~ msgstr "برگزیدن کروشه مطابق"
#~ msgid "Transpose Characters"
#~ msgstr "عقب و جلو کردن نویسهها"
#~ msgid "Delete Line"
#~ msgstr "حذف خط"
#~ msgid "Delete Word Left"
#~ msgstr "حذف واژه چپ"
#~ msgid "Delete Word Right"
#~ msgstr "حذف واژه راست"
#~ msgid "Delete Next Character"
#~ msgstr "حذف واژه بعدی"
#~ msgid "Backspace"
#~ msgstr "پسبر"
#, fuzzy
#~| msgid "Insert: %1"
#~ msgid "Insert Tab"
#~ msgstr "درج: %1"
#~ msgid "&Indent"
#~ msgstr "&تورفتگی"
#~ msgid ""
#~ "Use this to indent a selected block of text.
You can configure "
#~ "whether tabs should be honored and used or replaced with spaces, in the "
#~ "configuration dialog."
#~ msgstr ""
#~ "استفاده از این برای تورفته کردن بلوک برگزیده متن.
چه تبها "
#~ "قبول شوند و استفاده شوند چه با فاصله جایگزین شوند، میتوانید آنها را در "
#~ "محاوره پیکربندی، پیکربندی کنید."
#~ msgid "&Unindent"
#~ msgstr "&بدون تورفتگی"
#~ msgid "Use this to unindent a selected block of text."
#~ msgstr "استفاده از این برای ایجاد نکردن تورفتگی در بلوک برگزیده متن."
#, fuzzy
#~| msgid "Collapse Toplevel"
#~ msgid "Fold Toplevel Nodes"
#~ msgstr "فشردن سطح بالا"
#, fuzzy
#~| msgid "Expand Toplevel"
#~ msgid "Unfold Toplevel Nodes"
#~ msgstr "بسط سطح بالا"
#, fuzzy
#~| msgid "Current line:"
#~ msgid "Fold Current Node"
#~ msgstr "خط جاری:"
#~ msgid "Export File as HTML"
#~ msgstr "صادرات پرونده به عنوان زنگام"
#~ msgid "Available Commands"
#~ msgstr "فرمانهای موجود"
#~ msgid ""
#~ "'help <command>'"
#~ "code>'help <command>' را "
#~ "اجرا کنید
Syntax: "
#~ "command [ arguments ]
For a list of available "
#~ "commands, enter help list
For help for "
#~ "individual commands, enter help <command>
نحو: command "
#~ "[ arguments ]
برای فهرستی از فرمانهای موجود،"
#~ "فهرست کمک
را وارد کنید. برای کمک در مورد "
#~ "فرمانهای شخصی، help <command> را وارد کنید
Data Recovery (Help)
Could " #~ "not recover all data. The swap file was probably incomplete.
" #~ "html>" #~ msgstr "" #~ "\n" #~ "کنش " #~ "کلید جهش )اگر گزینشی موجود نباشد( جهش با " #~ "خط جاری در بلوک کد جاری مانند emacs، همتراز شود، جهش را میانبری " #~ "به کنش همتراز کردن سازید.\">بیشتر...
" #~ msgid "Overwrite" #~ msgstr "جاینوشت" #, fuzzy #~| msgid "" #~| "\n" #~| "Tab " #~| "key action (if no selection exists) Tab to " #~| "align the current line in the current code block like in emacs, make " #~| "Tab a shortcut to the action Align.\">More ...
" #~| "html>" #~ msgid "" #~ "\n" #~ "Data Recovery (Help)" #~ "p>
The file was not closed appropriately. Do you want to recover the " #~ "data?
" #~ msgstr "" #~ "\n" #~ "کنش " #~ "کلید جهش )اگر گزینشی موجود نباشد( جهش با " #~ "خط جاری در بلوک کد جاری مانند emacs، همتراز شود، جهش را میانبری " #~ "به کنش همتراز کردن سازید.\">بیشتر...
" #, fuzzy #~| msgid "Scope" #~ msgid "Stop" #~ msgstr "دامنه" #, fuzzy #~| msgid "Colors" #~ msgctxt "@title:column the color name" #~ msgid "Color Role" #~ msgstr "رنگها" #, fuzzy #~| msgid "Colors" #~ msgctxt "@title:column a color button" #~ msgid "Color" #~ msgstr "رنگها" #, fuzzy #~| msgid "Normal &Color..." #~ msgid "Export HlColors..." #~ msgstr "&رنگ عادی..." #, fuzzy #~| msgid "Normal &Color..." #~ msgid "Import HlColors..." #~ msgstr "&رنگ عادی..." #~ msgid "Template Background" #~ msgstr "زمینه قالب" #~ msgid "Collapse One Local Level" #~ msgstr "فشردن یک سطح محلی" #~ msgid "Expand One Local Level" #~ msgstr "بسط یک سطح محلی" #, fuzzy #~| msgid "Collapse Toplevel" #~ msgid "Collapse Level 1" #~ msgstr "فشردن سطح بالا" #, fuzzy #~| msgid "Collapse Toplevel" #~ msgid "Collapse Level 2" #~ msgstr "فشردن سطح بالا" #, fuzzy #~| msgid "Collapse Toplevel" #~ msgid "Collapse Level 3" #~ msgstr "فشردن سطح بالا" #, fuzzy #~| msgid "Collapse Toplevel" #~ msgid "Collapse Level 4" #~ msgstr "فشردن سطح بالا" #, fuzzy #~| msgid "Collapse Toplevel" #~ msgid "Collapse Level 5" #~ msgstr "فشردن سطح بالا" #, fuzzy #~| msgid "Collapse Toplevel" #~ msgid "Collapse Level 6" #~ msgstr "فشردن سطح بالا" #, fuzzy #~| msgid "Collapse Toplevel" #~ msgid "Collapse Level 7" #~ msgstr "فشردن سطح بالا" #, fuzzy #~| msgid "Collapse Toplevel" #~ msgid "Collapse Level 8" #~ msgstr "فشردن سطح بالا" #, fuzzy #~| msgid "Collapse Toplevel" #~ msgid "Collapse Level 9" #~ msgstr "فشردن سطح بالا" #, fuzzy #~| msgid "Expand Toplevel" #~ msgid "Expand Level 1" #~ msgstr "بسط سطح بالا" #, fuzzy #~| msgid "Expand Toplevel" #~ msgid "Expand Level 2" #~ msgstr "بسط سطح بالا" #, fuzzy #~| msgid "Expand Toplevel" #~ msgid "Expand Level 3" #~ msgstr "بسط سطح بالا" #, fuzzy #~| msgid "Expand Toplevel" #~ msgid "Expand Level 4" #~ msgstr "بسط سطح بالا" #, fuzzy #~| msgid "Expand Toplevel" #~ msgid "Expand Level 5" #~ msgstr "بسط سطح بالا" #, fuzzy #~| msgid "Expand Toplevel" #~ msgid "Expand Level 6" #~ msgstr "بسط سطح بالا" #, fuzzy #~| msgid "Expand Toplevel" #~ msgid "Expand Level 7" #~ msgstr "بسط سطح بالا" #, fuzzy #~| msgid "Expand Toplevel" #~ msgid "Expand Level 8" #~ msgstr "بسط سطح بالا" #, fuzzy #~| msgid "Expand Toplevel" #~ msgid "Expand Level 9" #~ msgstr "بسط سطح بالا" #, fuzzy #~| msgid "Collapse Toplevel" #~ msgid "&Collapse" #~ msgstr "فشردن سطح بالا" #, fuzzy #~ msgid "&Auto completion enabled" #~ msgstr "تکمیل واژه" #, fuzzy #~| msgid "&Format:" #~ msgid "Form" #~ msgstr "&قالب:" #~ msgid "" #~ "A KDE text-editor component could not be found;\n" #~ "please check your KDE installation." #~ msgstr "" #~ "مولفه ویرایش متن KDE نتوانست پیدا شود؛\n" #~ "لطفاً، نصب KDE خود را بررسی کنید." #~ msgid "Use this to close the current document" #~ msgstr "استفاده از این برای بستن سند جاری" #~ msgid "Use this command to create a new document" #~ msgstr "استفاده از این فرمان برای ایجاد یک سند جدید" #~ msgid "Use this command to open an existing document for editing" #~ msgstr "استفاده از این فرمان برای باز کردن سند موجود جهت ویرایش" #~ msgid "" #~ "This lists files which you have opened recently, and allows you to easily " #~ "open them again." #~ msgstr "" #~ "پروندههایی که اخیراً باز کردهاید را فهرست میکند، و به شما اجازه میدهد آنها " #~ "را به آسانی باز کنید." #~ msgid "&New Window" #~ msgstr "پنجره &جدید" #~ msgid "Create another view containing the current document" #~ msgstr "ایجاد نمای دیگر شامل سند جاری" #~ msgid "Choose Editor..." #~ msgstr "انتخاب ویرایشگر..." #, fuzzy #~ msgid "Override the system-wide setting for the default editing component" #~ msgstr "لفو تنظیم کل سیستم برای مولفه ویرایش پیشفرض" #~ msgid "Close the current document view" #~ msgstr "بستن نمای سند جاری" #~ msgid "Use this command to show or hide the view's statusbar" #~ msgstr "استفاده از این فرمان برای نمایش یا مخفی کردن میله وضعیت نما" #~ msgid "Sho&w Path" #~ msgstr "&نمایش مسیر" #~ msgid "Show the complete document path in the window caption" #~ msgstr "نمایش مسیر کامل سند در عنوان پنجره" #~ msgid "Configure the application's keyboard shortcut assignments." #~ msgstr "پیکربندی انتسلبهای میانبر صفحه کلید کاربرد." #~ msgid "Configure which items should appear in the toolbar(s)." #~ msgstr "پیکربندی فقرههایی که باید در میله ابزار)ها( ظاهر شود." #~ msgid "&About Editor Component" #~ msgstr "&درباره مؤلفه ویرایشگر" #~ msgid " INS " #~ msgstr " درج" #~ msgid " LINE " #~ msgstr " خط " #~ msgid "Open File" #~ msgstr "باز کردن پرونده" #~ msgid "" #~ "The given file could not be read, check if it exists or if it is readable " #~ "for the current user." #~ msgstr "" #~ "پرونده دادهشده نتوانست خوانده شود، در صورت وجود، یا اگر برای کاربر جاری " #~ "خوانا است آن را بررسی کنید." #~ msgid " BLOCK " #~ msgstr " بلوک " #~ msgid "Read the contents of stdin" #~ msgstr "خواندن محتویات stdin" #~ msgid "Set encoding for the file to open" #~ msgstr "تنظیم کدبندی برای پرونده جهت باز کردن" #~ msgid "Navigate to this line" #~ msgstr "ناوش به این خط" #~ msgid "Navigate to this column" #~ msgstr "ناوش به این ستون" #~ msgid "KWrite" #~ msgstr "KWrite" #~ msgid "KWrite - Text Editor" #~ msgstr "KWrite - ویرایشگر متن" #~ msgid "(c) 2000-2005 The Kate Authors" #~ msgstr "(ح) ۲۰۰۵ - ۲۰۰۰ سازندگان Kate" #~ msgid "Choose Editor Component" #~ msgstr "انتخاب مؤلفه ویرایشگر" #~ msgid "Directory containing tests, basedir and output directories." #~ msgstr "فهرست راهنمای شامل آزمونها، فهرست پایه و فهرستهای خروجی." #~ msgid "" #~ "Compare failures of this testrun against snapshotTab " #~| "key action (if no selection exists) Tab to " #~| "align the current line in the current code block like in emacs, make " #~| "Tab a shortcut to the action Align.\">More ...
" #~| "html>" #~ msgid "" #~ "\n" #~ "\n" #~ "When selected, vi " #~ "commands will override Kate's built-in commands. For example: Ctrl+R will " #~ "redo, and override the standard action (showing the search & replace " #~ "dialog).
" #~ msgstr "" #~ "\n" #~ "کنش " #~ "کلید جهش )اگر گزینشی موجود نباشد( جهش با " #~ "خط جاری در بلوک کد جاری مانند emacs، همتراز شود، جهش را میانبری " #~ "به کنش همتراز کردن سازید.\">بیشتر...
" #~ msgid "Shortcuts Configuration" #~ msgstr "پیکربندی میانبرها" #~ msgid "" #~ "You are trying to save a python file as non ASCII, without specifiying a " #~ "correct source encoding line for encoding \"%1\"" #~ msgstr "" #~ "سعی در ذخیره پرونده python به عنوان غیر اسکی دارید، بدون مشخص کردن خط " #~ "کدبندی منبع درست برای کدبندی »%1«" #~ msgid "No encoding header" #~ msgstr "بدون سرآیند کدبندی" #~ msgid "" #~ "The spelling program could not be started. Please make sure you have set " #~ "the correct spelling program and that it is properly configured and in " #~ "your PATH." #~ msgstr "" #~ "برنامه غلطیاب را نمیتوان آغاز کرد. لطفاً، مطمئن شوید که برنامه هجی صحیح را " #~ "تنظیم کردهاید، و به درستی پیکربندی شده و در مسیرتان است." #~ msgid "The spelling program seems to have crashed." #~ msgstr "به نظر میرسد برنامه هجی فروپاشی شده است." #~ msgid "" #~ "Use this to clean the indentation of a selected block of text (only tabs/" #~ "only spaces)If this option is checked, every new view will show marks on the " #~ "vertical scrollbar.
These marks will, for instance, show bookmarks." #~ "
" #~ msgstr "" #~ "اگر این گزینه علامت بخورد، هر نمای جدید نشانها را در میله لغزش عمودی " #~ "نمایش میدهد.
این نشانها برای نمونه، چوب الفها را نمایش میدهند.
" #~ msgid "unknown" #~ msgstr "ناشناخته" #~ msgid "Context '%1': Incorrect number of arguments in '%2'" #~ msgstr "متن »%1«: تعداد نادرست نشانوندها در »%2«" #~ msgid "Exception, line %1: %2" #~ msgstr "استثناء، خط %1: %2" #~ msgid "Could not access view." #~ msgstr "نتوانست به نما دست یابد." #~ msgid "Could not access lookup object." #~ msgstr "نتوانست به شیء مراجعه دست یابد." #~ msgid "Exception: Unable to find function '%1': %2" #~ msgstr "استثناء: قادر به یافتن تابع »%1« نیست: %2" #~ msgid "Exception in line %1: %2" #~ msgstr "استثناء در خط %1: %2" #~ msgid "Sort: None" #~ msgstr "مرتب کردن: هیچکدام" #~ msgid "Filter: None" #~ msgstr "پالایه: هیچکدام" #~ msgid "&Maximum undo steps:" #~ msgstr "&بیشینه گامهای واگرد:" #~ msgid "" #~ "The file %1 was opened with UTF-8 encoding but contained invalid " #~ "characters. It is set to read-only mode, as saving might destroy it's " #~ "content. Either reopen the file with the correct encoding chosen or " #~ "enable the read-write mode again in the menu to be able to edit it." #~ msgstr "" #~ "پرونده %1 با کدبندی UTF-8 باز نمیشود، ولی شامل نویسههای نامعتبر است. به " #~ "حالت فقط خواندنی تنظیم می شود، چرا که ذخیره ممکن است محتوای آن را خراب " #~ "کند. یا پرونده را با انتخاب کدبندی درست مجدداً باز نموده یا حالت خواندنی " #~ "نوشتنی را در گزینگان فعال سازید تا قادر به ویرایش آن باشید." #~ msgid " Static" #~ msgstr " ایستا" #~ msgid "Print syntax &guide" #~ msgstr "چاپ &راهنمای نحوی" #~ msgid "" #~ "Access " #~ "Grouping properties
" #~ msgstr "" #~ "ویژگیهای " #~ "گروهبندی دستیابی
" #~ msgid "" #~ "Item " #~ "Grouping properties
" #~ msgstr "" #~ "ویژگیهای " #~ "گروهبندی فقره
" #~ msgid "Print &selected text only" #~ msgstr "فقط چاپ متن &برگزیده" #~ msgid "" #~ "This option is only available if some text is selected in the document." #~ "
If available and enabled, only the selected text is printed.
" #~ msgstr "" #~ "اگر مقداری از متن موجود در سند گزینش شود، فقط این گزینه در دسترس است. " #~ "
اگر در دسترس باشد و فعال شود، فقط متن برگزیده چاپ میشود.
" #~ msgid "Print %1" #~ msgstr "چاپ %1" #~ msgid "Nowhere" #~ msgstr "هیچجا" #~ msgid "Selection Only" #~ msgstr "فقط گزینش" #~ msgid "Selection, then Current Word" #~ msgstr "گزینش، سپس واژه جاری" #~ msgid "Current Word Only" #~ msgstr "فقط واژه جاری" #~ msgid "Current Word, then Selection" #~ msgstr "واژه جاری، سپس گزینش" #~ msgid "Smart search t&ext from:" #~ msgstr "جستجوی هوشمند &متن از:" #~ msgid "NORM" #~ msgstr "عادی" #~ msgid " NORM " #~ msgstr " عادی" #~ msgid "&From cursor" #~ msgstr "&از مکاننما" #~ msgid "&Highlight all" #~ msgstr "&مشخص کردن همه" #~ msgid "Unspecified Scope" #~ msgstr "دامنه مشخصنشده" #~ msgid "Unspecified Access" #~ msgstr "دستیابی مشخصنشده" #~ msgid "Unspecified Item Type" #~ msgstr "نوع فقره مشخصنشده"