# translation of kcachegrind.po to Dutch
# translation of kcachegrind.po to
# Rinse de Vries This is a purely fictional 'most probable' "
"call stack. It is built up by starting with the current selected function "
"and adds the callers/callees with highest cost at the top and to bottom."
"p> The Cost and Calls columns show the cost used for all "
"calls from the function in the line above. Deze lijst is een lijst met "
"fictieve, meest waarschijnlijke kosten. De lijst is opgebouwd, beginnend met "
"de huidig geselecteerde functie en voegt de aanroepers/aangeroepenen met de "
"hoogste kosten van boven naar beneden in. De kolommen voor kosten"
"b> en aanroepen tonen de kosten die worden gebruikt voor alle "
"aanroepen van de functie in de regel erboven. This dockable shows in the top part the list of "
"loadable profile dumps in all subdirectories of:
The "
"list is sorted according to the target command profiled in the corresponding "
"dump.
On selecting a profile dump, information for it is shown in the " "bottom area of the dockable:
Dit venster toont in het bovenste gedeelte de lijst " "van laadbare profielbronnen in alle submappen van:
Door een profielbron te selecteren wordt de informatie " "in het onderste gedeelte van het venster getoond:
Make a copy of the current layout.
" msgstr "" "Huidige layout duplicerenMaak een kopie van de huidige layout.
" #: kcachegrind/toplevel.cpp:372 #, kde-format msgid "&Remove" msgstr "&Verwijderen" #: kcachegrind/toplevel.cpp:374 #, kde-format msgid "" "Remove Current LayoutDelete current layout and make the previous " "active.
" msgstr "" "Huidige layout verwijderenVerwijder de huidige layout en maak de " "vorige actief.
" #: kcachegrind/toplevel.cpp:379 #, kde-format msgid "&Go to Next" msgstr "&Ga naar volgende" #: kcachegrind/toplevel.cpp:382 #, kde-format msgid "Go to Next Layout" msgstr "Ga naar volgende layout" #: kcachegrind/toplevel.cpp:386 #, kde-format msgid "&Go to Previous" msgstr "&Ga naar vorige" #: kcachegrind/toplevel.cpp:389 #, kde-format msgid "Go to Previous Layout" msgstr "Ga naar de vorige layout" #: kcachegrind/toplevel.cpp:393 #, kde-format msgid "&Restore to Default" msgstr "Te&rugzetten naar standaard" #: kcachegrind/toplevel.cpp:395 #, kde-format msgid "Restore Layouts to Default" msgstr "Layouts terugzetten naar standaard" #: kcachegrind/toplevel.cpp:399 #, kde-format msgid "&Save as Default" msgstr "Op&slaan als standaard" #: kcachegrind/toplevel.cpp:401 #, kde-format msgid "Save Layouts as Default" msgstr "Layouts opslaan als standaard" #: kcachegrind/toplevel.cpp:412 #, kde-format msgid "NewOpen new empty KCachegrind window.
" msgstr "NieuwOpent een nieuw leeg venster.
" #: kcachegrind/toplevel.cpp:416 #, kde-format msgid "&Add..." msgstr "&Toevoegen..." #: kcachegrind/toplevel.cpp:418 #, kde-format msgid "" "Add Profile DataThis opens an additional profile data file in the " "current window.
" msgstr "" "Voeg profiel gegevens toeDit opent een additioneel " "profielbronbestand in het huidige venster.
" #: kcachegrind/toplevel.cpp:424 #, kde-format msgctxt "Reload a document" msgid "&Reload" msgstr "He&rladen" #: kcachegrind/toplevel.cpp:427 #, kde-format msgid "Reload Profile DataThis loads any new created parts, too.
" msgstr "" "Trace herladenDit laadt tevens alle nieuw-aangemaakte " "profielbronnen.
" #: kcachegrind/toplevel.cpp:432 #, kde-format msgid "&Export Graph" msgstr "Grafiek &exporteren" #: kcachegrind/toplevel.cpp:435 #, kde-format msgid "" "Export Call GraphGenerates a file with extension .dot for the " "tools of the GraphViz package.
" msgstr "" "Aanroepgrafiek exporterenGenereert een bestand met de extensie ." "dot, dat kan worden geopend met hulpprogramma's uit het pakket GraphViz.
" #: kcachegrind/toplevel.cpp:443 #, kde-format msgid "&Force Dump" msgstr "Dump &forceren" #: kcachegrind/toplevel.cpp:446 #, kde-format msgid "" "Force DumpThis forces a dump for a Callgrind profile run in the " "current directory. This action is checked while KCachegrind looks for the " "dump. If the dump is finished, it automatically reloads the current trace. " "If this is the one from the running Callgrind, the new created trace part " "will be loaded, too.
Force dump creates a file 'callgrind.cmd', and " "checks every second for its existence. A running Callgrind will detect this " "file, dump a trace part, and delete 'callgrind.cmd'. The deletion is " "detected by KCachegrind, and it does a Reload. If there is no " "Callgrind running, press 'Force Dump' again to cancel the dump request. This " "deletes 'callgrind.cmd' itself and stops polling for a new dump.
Note: " "A Callgrind run only detects existence of 'callgrind.cmd' when " "actively running a few milliseconds, i.e. not sleeping. Tip: For a " "profiled GUI program, you can awake Callgrind e.g. by resizing a window of " "the program.
" msgstr "" "Dump forcerenDit forceert een dump voor een Callgrind " "profileringsactie in de huidige map. Deze actie wordt gecontroleerd terwijl " "KCachegrind de dump zoekt. Als de dump klaar is wordt de trace automatisch " "herladen. Als dit er een is van de lopende Cachegrind, dan wordt de nieuwe " "trace part ook geladen.
Dump forceren maakt een bestand 'callgrind." "cmd' en controleert elke seconde of dit bestand bestaat. Een lopende " "Callgrind zal dit bestand ontdekken, een trace dumpen en het bestand " "'callgrind.cmd' verwijderen. Als het bestand is verwijderd zal KCachegrind " "dit ontdekken en herladen. Als er geen lopend Cachegrind proces " "bestaat drukt u nogmaals op 'Dump forceren' om het dumpverzoek af te breken. " "Dit verwijderd het bestand 'cachegrind.cmd' en beëindigt de controle op " "nieuwe dumps.
Opmerking: een Callgrind-run ontdekt het bestaan van het " "cachegrind.cmd' bestand alleen als het te profileren programma een " "aantal milliseconden loopt, dat is: niet slaapt. Tip: in een " "programma met een grafische gebruikersinterface kunt u Callgrind dwingen te " "lopen door bijvoorbeeld het venster van het programma van afmeting te " "veranderen.
" #: kcachegrind/toplevel.cpp:471 #, kde-format msgid "" "Open Profile DataThis opens a profile data file, with possible " "multiple parts
" msgstr "" "Trace openenDit opent een trace-bestand, waarbij eventuele " "bijhorende profielbronnen ook worden geopend.
" #: kcachegrind/toplevel.cpp:486 #, kde-format msgid "Show/Hide the Parts Overview Dockable" msgstr "Overzicht van geladen Trace-profielbronnen tonen/verbergen" #: kcachegrind/toplevel.cpp:491 #, kde-format msgid "Call Stack" msgstr "Aanroeplijst" #: kcachegrind/toplevel.cpp:494 #, kde-format msgid "Show/Hide the Call Stack Dockable" msgstr "Aanroeplijst tonen/verbergen" #: kcachegrind/toplevel.cpp:499 #, kde-format msgid "Function Profile" msgstr "Functieprofiel" #: kcachegrind/toplevel.cpp:502 #, kde-format msgid "Show/Hide the Function Profile Dockable" msgstr "Functieprofieloverzicht tonen/verbergen" #: kcachegrind/toplevel.cpp:510 #, kde-format msgid "Show/Hide the Profile Dumps Dockable" msgstr "Lijst met laadbare profielbronnen tonen/verbergen" #: kcachegrind/toplevel.cpp:517 #, kde-format msgid "Relative" msgstr "Relatief" #: kcachegrind/toplevel.cpp:519 #, kde-format msgid "Show relative instead of absolute costs" msgstr "Relatieve in plaats van absolute kosten tonen" #: kcachegrind/toplevel.cpp:525 #, kde-format msgid "Relative to Parent" msgstr "Relatief ten opzichte van hoger element" #: kcachegrind/toplevel.cpp:528 #, kde-format msgid "Show percentage costs relative to parent" msgstr "Procentuele kosten gebaseerd op de kosten van het hogere element tonen" #: kcachegrind/toplevel.cpp:532 #, kde-format msgid "" "Show percentage costs relative to parentIf this is switched off, " "percentage costs are always shown relative to the total cost of the profile " "part(s) that are currently browsed. By turning on this option, percentage " "cost of shown cost items will be relative to the parent cost item." "p>
| Cost Type | Parent Cost | " "tr>
| Function Cumulative | Total |
| Function Self" "td> | Function Group (*) / Total |
| Call | Function " "Inclusive |
| Source Line | Function Inclusive |
| Kostentype | Kosten hoger element" "td> |
| Cumulatief voor functie | Totaal | " "tr>
| Alleen voor functie | Functiegroep (*) / Totaal | " "tr>
| Aanroep | Cumulatief voor functie | " "tr>
| Broncoderegel | Cumulatief voor functie |
(*) Uitsluitend als functiegroepering is ingeschakeld (bijv. ELF-" "object groepering).
" #: kcachegrind/toplevel.cpp:549 #, kde-format msgid "Cycle Detection" msgstr "Cyclusbepaling" #: kcachegrind/toplevel.cpp:552 #, kde-format msgid "" "Detect recursive cyclesIf this is switched off, the treemap " "drawing will show black areas when a recursive call is made instead of " "drawing the recursion ad infinitum. Note that the size of black areas often " "will be wrong, as inside recursive cycles the cost of calls cannot be " "determined; the error is small, however, for false cycles (see " "documentation).
The correct handling for cycles is to detect them and " "collapse all functions of a cycle into an artificial function, which is done " "when this option is selected. Unfortunately, with GUI applications, this " "often will lead to huge false cycles, making the analysis impossible; " "therefore, there is the option to switch this off.
" msgstr "" "Cycli van recursieve aanroepen ontdekkenAls dit is uitgeschakeld " "zal de 'treemap'-tekening zwarte gebieden vertonen waar een recursieve " "aanroep wordt gedaan in plaats van de afzonderlijke aanroepen te tekenen. " "Merk op dat de zwarte gebieden vaak van een verkeerde afmeting zullen zijn " "omdat in recursieve cycli de kosten van een aanroep niet kunnen worden " "berekend. De fout is echter klein voor foute cycli (zie de documentatie)." "p>
De correcte afhandeling voor cycli is om ze te ontdekken en samen te " "voegen in een virtuele functie. Als deze optie aanstaat gebeurt dat. Helaas " "leidt dit bij programma's met een grafische gebruikersinterface vaak tot een " "groot aantal foute cycli waardoor een goede analyse niet kan worden gemaakt. " "Daarom bestaat de mogelijkheid om dit uit te schakelen.
" #: kcachegrind/toplevel.cpp:568 #, kde-format msgid "Shorten Templates" msgstr "Sjablonen voor verkleinen" #: kcachegrind/toplevel.cpp:570 #, kde-format msgid "Hide Template Parameters in C++ Symbols" msgstr "Sjabloonparameters in C++ Symbolen verbergen" #: kcachegrind/toplevel.cpp:571 #, kde-format msgid "" "Hide Template Parameters in C++ SymbolsIf this is switched on, " "every symbol displayed will have any C++ template parameters hidden, just " "showing <> instead of a potentially nested template parameter." "p>
In this mode, you can hover the mouse pointer over the activated symbol " "label to show a tooltip with the unabbreviated symbol.
" msgstr "" "Sjabloonparameters in C++ Symbolen verbergenAls dit is " "ingeschakeld, dan zijn van elk getoond symbool alle C++ sjabloonparameters " "verborgen, alleen tonend <> in plaats van een potentieel geneste " "sjabloonparameter.
In this modus, kunt met de muiswijzer over het " "geactiveerde symboollabel gaan om een tekstballon te tonen met het niet " "afgekorte symbool.
" #: kcachegrind/toplevel.cpp:587 #, kde-format msgid "&Up" msgstr "&Omhoog" #: kcachegrind/toplevel.cpp:596 #, kde-format msgid "" "Go UpGo to last selected caller of current function. If no caller " "was visited, use that with highest cost.
" msgstr "" "Ga omhoogGa naar de laatst geselecteerde aanroeper van de huidige " "functie. Als geen aanroeper is bezocht, gebruik dan degene met de hoogste " "kosten.
" #: kcachegrind/toplevel.cpp:613 #, kde-format msgid "Go back in function selection history" msgstr "Ga terug in functieselectiegeschiedenis" #: kcachegrind/toplevel.cpp:627 #, kde-format msgid "Go forward in function selection history" msgstr "Ga vooruit in functieselectiegeschiedenis" #: kcachegrind/toplevel.cpp:632 kcachegrind/toplevel.cpp:1503 #, kde-format msgid "Primary Event Type" msgstr "Primair gebeurtenistype" #: kcachegrind/toplevel.cpp:633 #, kde-format msgid "Select primary event type of costs" msgstr "Primair gebeurtenistype van kosten selecteren" #: kcachegrind/toplevel.cpp:655 kcachegrind/toplevel.cpp:1508 #, kde-format msgid "Secondary Event Type" msgstr "Secundair gebeurtenistype" #: kcachegrind/toplevel.cpp:656 #, kde-format msgid "Select secondary event type for cost e.g. shown in annotations" msgstr "" "Secundair gebeurtenistype voor kosten bijvoorbeeld getoond in annotaties" #: kcachegrind/toplevel.cpp:665 #, kde-format msgid "Grouping" msgstr "Groepering" #: kcachegrind/toplevel.cpp:667 #, kde-format msgid "Select how functions are grouped into higher level cost items" msgstr "Selecteer hoe functies worden gegroepeerd in hogere kostenelementen" #: kcachegrind/toplevel.cpp:673 #, kde-format msgid "(No Grouping)" msgstr "(Geen groepering)" #: kcachegrind/toplevel.cpp:685 #, kde-format msgid "Split" msgstr "Splitsen" #: kcachegrind/toplevel.cpp:688 #, kde-format msgid "Show two information panels" msgstr "Laat twee informatiepanelen zien" #: kcachegrind/toplevel.cpp:694 #, kde-format msgid "Split Horizontal" msgstr "Horizontaal splitsen" #: kcachegrind/toplevel.cpp:697 #, kde-format msgid "Change Split Orientation when main window is split." msgstr "Wijzig de splitsingoriëntatie als het hoofdvenster gesplitst is." #: kcachegrind/toplevel.cpp:891 #, kde-format msgid "Select Callgrind Profile Data" msgstr "Cachegrind-profielgegevens kiezen" #: kcachegrind/toplevel.cpp:893 kcachegrind/toplevel.cpp:961 #, kde-format msgid "Callgrind Profile Data (cachegrind.out* callgrind.out*);;All Files (*)" msgstr "" "Profielgegevens van Callgrind (cachegrind.out* callgrind.out*);;Alle " "bestanden (*)" #: kcachegrind/toplevel.cpp:921 kcachegrind/toplevel.cpp:950 #, kde-format msgid "" "Could not open the file \"%1\". Check it exists and you have enough " "permissions to read it." msgstr "" "Kon het bestand \"%1\" niet openen. Controleer of het bestaat en of u genoeg " "rechten hebt om het te lezen." #: kcachegrind/toplevel.cpp:959 #, kde-format msgid "Add Callgrind Profile Data" msgstr "Cachegrind profielgegevens toevoegen" #: kcachegrind/toplevel.cpp:1129 kcachegrind/toplevel.cpp:1456 #, kde-format msgid "(Hidden)" msgstr "(Verborgen)" #: kcachegrind/toplevel.cpp:1513 #, kde-format msgid "Hide" msgstr "Verbergen" #: kcachegrind/toplevel.cpp:1555 #, kde-format msgid "Show Absolute Cost" msgstr "Absolute kosten tonen" #: kcachegrind/toplevel.cpp:1558 #, kde-format msgid "Show Relative Cost" msgstr "Relatieve kosten tonen" #: kcachegrind/toplevel.cpp:1593 #, kde-format msgid "Go Back" msgstr "Ga terug" #: kcachegrind/toplevel.cpp:1594 #, kde-format msgid "Go Forward" msgstr "Ga verder" #: kcachegrind/toplevel.cpp:1595 #, kde-format msgid "Go Up" msgstr "Ga omhoog" #: kcachegrind/toplevel.cpp:1807 #, kde-format msgid "Layout Count: %1" msgstr "Aantal layouts: %1" #: kcachegrind/toplevel.cpp:1814 #, kde-format msgid "No profile data file loaded." msgstr "Geen profielgegevensbestand geladen." #: kcachegrind/toplevel.cpp:1823 #, kde-format msgid "Total %1 Cost: %2" msgstr "Totaal %1 kosten %2" #: kcachegrind/toplevel.cpp:1835 #, kde-format msgid "No event type selected" msgstr "Geen gebeurtenistype geselecteerd" #: kcachegrind/toplevel.cpp:2013 #, kde-format msgid "Cannot determine receiver PID for dump request" msgstr "Kan de PID van de ontvanger voor het dumpverzoek niet bepalen" #: kcachegrind/toplevel.cpp:2059 #, kde-format msgid "Error running callgrind_control" msgstr "Fout bij het uitvoeren van callgrind_control" #: kcachegrind/toplevel.cpp:2098 kcachegrind/toplevel.cpp:2135 #: kcachegrind/toplevel.cpp:2172 #, kde-format msgid "(No Stack)" msgstr "(Geen stack)" #: kcachegrind/toplevel.cpp:2104 #, kde-format msgid "(No next function)" msgstr "(Geen volgende functie)" #: kcachegrind/toplevel.cpp:2141 #, kde-format msgid "(No previous function)" msgstr "(Geen vorige functie)" #: kcachegrind/toplevel.cpp:2177 #, kde-format msgid "(No Function Up)" msgstr "(Geen bovenliggende functie)" #: kcachegrind/toplevel.cpp:2309 kcachegrind/toplevel.cpp:2323 #, kde-format msgid "Loading %1" msgstr "%1 wordt geladen" #: kcachegrind/toplevel.cpp:2317 #, kde-format msgid "Error loading %1: %2" msgstr "Fout bij het laden van %1: %2" #~ msgid "" #~ "...that the What's this... help for every GUI widget\n" #~ "in KCachegrind contains detailed usage information for this widget?\n" #~ "It is highly recommend to read at least these help texts on first\n" #~ "use. Request What's this... help by pressing\n" #~ "Shift-F1 and clicking on the widget.
\n" #~ msgstr "" #~ "de Wat is dit?-hulp bevat voor elk interface-element\n" #~ "in KCachegrind gedetailleerde informatie omtrent het gebruik van het " #~ "interface-element1\n" #~ "Het is raadzaam om tenminste deze helpteksten te lezen voordat u het " #~ "interface-element voor\n" #~ " het eerst gebruikt. Gebruik Wat is dit? door Shift+F1 in te " #~ "drukken en te klikken op het interface-element
\n" #~ msgid "" #~ "...that you can get profile information at instruction level\n" #~ "with Calltree when you provide the option --dump-instr=yes?\n" #~ "Use the Assembler View for the instruction annotations.\n" #~ "
\n" #~ msgstr "" #~ "U kunt profielinformatie op instructieniveau\n" #~ "met Calltree krijgen met de optie --dump-instr=yes.\n" #~ "Gebruik het Assembler-venster voor geannoteerde instructies.\n" #~ "
\n" #~ msgid "" #~ "...that you can use Alt-Left/Right keys of your keyboard to go\n" #~ "back/forward in the active object history ?
\n" #~ msgstr "" #~ "U kunt de toetsen Alt-Links en Alt-Rechts gebruiken om\n" #~ "door de geschiedenis van actieve objecten te lopen.
\n" #~ msgid "" #~ "...that you can navigate in the Callee/Caller Map View using\n" #~ "arrow keys? Use Left/Right to change to siblings of the current\n" #~ "item; use Up/Down to go one nesting level up/down. To select\n" #~ "the current item, press Space, and to activate it, press Return.\n" #~ "
\n" #~ msgstr "" #~ "U kunt met de pijltjestoetsen navigeren in de aanroepenkaart en\n" #~ "de aanroeperskaart met de pijltjestoetsen. Gebruik Links/Rechts om in\n" #~ "het gelijke niveau te navigeren en Omhoog/Omlaag om het nestingniveau te\n" #~ "wijzigen. Druk op Spatie om het huidige element te selecteren, druk op " #~ "Return\n" #~ "om het huidige element te activeren.
\n" #~ msgid "" #~ "...that you can navigate in the Call Graph View using\n" #~ "arrow keys? Use Up/Down to go one calling level up/down, alternating\n" #~ "between calls and functions. Use Left/Right to change to siblings of a " #~ "current\n" #~ "selected call. To activate the current item, press Return.\n" #~ "
\n" #~ msgstr "" #~ "U kunt in de aanroepengrafiek navigeren met de pijltjestoetsen.\n" #~ "Gebruik Omhoog/Omlaag om het aanroepniveau te wijzigen terwijl u " #~ "gelijktijdig\n" #~ "afwisselt tussen aanroepen en functies. Gebruik Links/Rechts om te " #~ "veranderen van\n" #~ "aanroepen en functies op hetzelfde niveau. Om een huidig item te " #~ "activeren\n" #~ "drukt u op Return.\n" #~ "
\n" #~ msgid "" #~ "...that you can rapidly locate a function by entering part of its\n" #~ "name (case-insensitive) into the edit line of the toolbar\n" #~ "and hit return?
\n" #~ msgstr "" #~ "U kunt snel een functie zoeken door een deel van de\n" #~ "naam (niet hoofdlettergevoelig) in de invoerregel op de taakbals\n" #~ "te tikken en op Return te drukken.
\n" #~ msgid "" #~ "...that you can assign custom colors to \n" #~ "ELF objects/C++ Classes/Source Files for graph coloring\n" #~ "in Settings->Configure KCachegrind...?
\n" #~ msgstr "" #~ "U kunt eigen kleuren aan\n" #~ "ELF objecten/C++ klassen/Broncodebestanden toekennen\n" #~ "voor het gebruik in grafieken in \n" #~ "Instellingen->Configureer KCachegrind...
\n" #~ msgid "" #~ "...that you can see if debug info is available for a selected \n" #~ "function by looking at the location label in the Info tab or\n" #~ "the source listing header in the source tab?
\n" #~ "There must be the name of the source file (with extension).\n" #~ "If KCachegrind still does not show the source, make sure that you\n" #~ "have added the directory of the source file to the\n" #~ "Source Directories list in the configuration.\n" #~ msgstr "" #~ "
U kunt zien of debug informatie aanwezig is voor een geselecteerde\n" #~ "functie door te kijken naar de locatieaanduiding in het Informatie " #~ "tabblad of\n" #~ "de broncodelijst in het Broncode tabblad.
\n" #~ "Daar moet de naam van het broncodebestand (met extensie) aanwezig " #~ "zijn.\n" #~ "Als KCachegrind toch niet de broncode laat zien dient u te controleren " #~ "of\n" #~ "u de map met het broncodebestand hebt toegevoegd aan de\n" #~ "Broncodemappen lijst in de configuratie.\n" #~ msgid "" #~ "
...that you can configure whether KCachgrind should\n" #~ "show absolute event counts or relative ones (percentage display)?
\n" #~ msgstr "" #~ "U kunt instellen of KCachegrind absolute of relatieve " #~ "gebeurtenistellingen\n" #~ "laat zien (percentageafbeelding).
\n" #~ msgid "" #~ "...that you can configure the maximum number of items\n" #~ "for all function lists in KCachegrind? Limiting the number\n" #~ "of items is done to get a fast reacting GUI. The last item in\n" #~ "the list will show you the number of skipped functions, together\n" #~ "with a cost condition for these skipped functions.
\n" #~ "To activate a function with small costs, search for it and select\n" #~ "it in the flat profile. Selecting functions with small cost will\n" #~ "temporarily add them to the flat profile list.
\n" #~ msgstr "" #~ "U kunt het maximum aantal elementen voor alle functielijsten in\n" #~ "KCachegrind instellen. Het beperken van het maximum aantal elementen\n" #~ "zorgt ervoor dat de gebruikersinterface sneller wordt. Het laatste " #~ "element\n" #~ "in de lijst beeld het aantal overgeslagen functies af, samen met een \n" #~ "kostenconditie voor deze overgeslagen functies.
\n" #~ "Om een functie met lage kosten te activeren kunt u naar \n" #~ "deze functie zoeken en in de platte profiel selecteren. Het selecteren\n" #~ "van deze functies voegt hen tijdelijk toe aan het profiel.
\n" #~ msgid "" #~ "...that the Coverage tab - in contrast to the Call Lists tab -\n" #~ "shows all functions that are calling the selected function\n" #~ "(upper part) / are called by the selected function (bottom part),\n" #~ "no matter how many function are between them on the stack?
\n" #~ "Examples:
\n" #~ "An entry in the upper list for function foo1() with a value of 50%\n" #~ "with function bar() selected means that 50% of all the cost of function\n" #~ "bar() happened while called from function foo1().
\n" #~ "An entry in the bottom list for function foo2() with a value of 50%\n" #~ "with function bar() selected means that 50% of all the cost of function\n" #~ "bar() happened while calling foo2() from bar().
\n" #~ msgstr "" #~ "Het tabblad Dekking - in tegenstelling tot tabblad Aanroepen - laat \n" #~ "alle functies zien die de geselecteerde functie-aanroepen " #~ "(bovenste deel)\n" #~ "en alle functies die aangeroepen worden door de geselecteerde functie " #~ "(onderste deel),\n" #~ "onafhankelijk van het aantal tussenliggende functies daartussen.\n" #~ "Voorbeelden:
\n" #~ "Een element in de bovenste lijst voor functie foo1() met een waarde " #~ "van 50%\n" #~ "met functie bar() geselecteerd betekent dat 50 van alle kosten van " #~ "functie bar()\n" #~ "gespendeerd zijn terwijl ze vanuit functie foo1() zijn aangeroepen.
\n" #~ "Een element in de onderste lijst voor functie foo2() met een waarde " #~ "van 50%\n" #~ "met functie bar() geselecteerd betekent dat 50% van alle kosten zijn " #~ "gespendeerd\n" #~ "in functie bar() terwijl deze functie foo2() aanriep.
\n" #~ msgid "" #~ "...that waiting for the tool tip inside of a tree map\n" #~ "shows the list of names of the nested rectangles the mouse\n" #~ "pointer is over?
\n" #~ "Items from this list can be selected by pressing the right\n" #~ "mouse button.
\n" #~ msgstr "" #~ "Als u met de muisaanwijzer boven een rechthoek in de treemap\n" #~ "wacht krijgt u een tekstballon met alle namen van geneste rechthoeken op " #~ "die positie.
\n" #~ "Elementen in deze lijst kunnen worden geselecteerd door\n" #~ "de rechtermuisknop te bedienen.
\n" #~ msgid "" #~ "...that you can constrain the cost counts shown to only a\n" #~ "few parts of the whole trace by selecting these parts in the\n" #~ "\"Trace Selection\" Dockable?
\n" #~ "To generate multiple parts in a profiling run with\n" #~ "cachegrind, use e.g. option --cachedumps=xxx for parts\n" #~ "of a length of xxx basic blocks (A basic block is a run\n" #~ "of not-branching assembler statements inside of your program\n" #~ "code).
\n" #~ msgstr "" #~ "U kunt de kostentellingen beperken door het aantal geselecteerde\n" #~ "profieldelen te beperken in de Trace Selectie venster.
\n" #~ "Om meerdere profieldelen te genereren met cachegrind kunt u de optie\n" #~ "'--cachedumps=xxx' voor profieldelen met een lengte van xxx basisblokken\n" #~ "gebruiken. Een basisblok is een aaneensluiting van niet vertakkende " #~ "assembler\n" #~ "statements binnen uw programma.
\n" #~ msgid "&OK" #~ msgstr "&OK" #~ msgid "&Cancel" #~ msgstr "&Annuleren" #~ msgid "Source Files" #~ msgstr "Broncodebestanden" #~ msgid "C++ Classes" #~ msgstr "C++ klassen" #~ msgid "Function (no Grouping)" #~ msgstr "Functie (niet gegroepeerd)" #~ msgid "KCachegrind Configuration" #~ msgstr "KCachegrind configuratie" #~ msgid "(Placeholder for list of event types)" #~ msgstr "(Plaatshouder voor lijst van gebeurtenistypen)" #~ msgid "Active call to '%1'" #~ msgstr "Actieve aanroep naar '%1'" #~ msgid "%1 call to '%2'" #~ msgid_plural "%1 calls to '%2'" #~ msgstr[0] "%1 aanroep naar '%2'" #~ msgstr[1] "%1 aanroepen naar '%2'" #~ msgid "Jump %1 of %2 times to 0x%3" #~ msgstr "Sprong %1 van %2 maal naar 0x%3" #~ msgid "Jump %1 times to 0x%2" #~ msgstr "Sprong %1 maal naar 0x%2" #~ msgid "(cycle)" #~ msgstr "(cyclus)" #~ msgid "Abstract Item" #~ msgstr "Abstract element" #~ msgid "Cost Item" #~ msgstr "Kostenelement" #~ msgid "Part Source Line" #~ msgstr "Regel in profielbron" #~ msgid "Source Line" #~ msgstr "Broncoderegel" #~ msgid "Part Line Call" #~ msgstr "Aanroep in regel van profielbron" #~ msgid "Line Call" #~ msgstr "Aanroep in regel" #~ msgid "Part Jump" #~ msgstr "Sprong in profielbron" #~ msgid "Jump" #~ msgstr "Sprong" #~ msgid "Part Instruction" #~ msgstr "Instructie in profielbron" #~ msgid "Instruction" #~ msgstr "Instructie" #~ msgid "Part Instruction Jump" #~ msgstr "Instructiesprong in profielbron" #~ msgid "Instruction Jump" #~ msgstr "Instructiesprong" #~ msgid "Part Instruction Call" #~ msgstr "Aanroep in instructie in profielbron" #~ msgid "Instruction Call" #~ msgstr "Aanroep in instructie" #~ msgid "Part Call" #~ msgstr "Aanroep in profielbron" #~ msgid "Call" #~ msgstr "Aanroep" #~ msgid "Part Function" #~ msgstr "Functie in profielbron" #~ msgid "Function Source File" #~ msgstr "Broncodebestand van functie" #~ msgid "Function Cycle" #~ msgstr "Functiecyclus" #~ msgid "Part Class" #~ msgstr "Klasse in profielbron" #~ msgid "Class" #~ msgstr "Klasse" #~ msgid "Part Source File" #~ msgstr "Broncodebestand in profielbron" #~ msgid "Source File" #~ msgstr "Broncodebestand" #~ msgid "Part ELF Object" #~ msgstr "ELF-object in profielbron" #~ msgid "ELF Object" #~ msgstr "ELF-object" #~ msgid "Profile Part" #~ msgstr "Profielbron" #~ msgid "Program Trace" #~ msgstr "Programma-trace" #~ msgid "%1 from %2" #~ msgstr "%1 van %2" #~ msgid "(unknown)" #~ msgstr "(onbekend)" #~ msgid "(no caller)" #~ msgstr "(geen aanroeper)" #~ msgid "%1 via %2" #~ msgstr "%1 via %2" #~ msgid "(no callee)" #~ msgstr "(geen aangeroepene)" #~ msgid "(not found)" #~ msgstr "(niet gevonden)" #~ msgid "Recalculating Function Cycles..." #~ msgstr "Functiecycli worden opnieuw berekend..." #~ msgctxt "A thing's name" #~ msgid "Name" #~ msgstr "Naam" #~ msgid "Cost" #~ msgstr "Kosten" #~ msgid "Profile Part Overview: Current is '%1'" #~ msgstr "Overzicht van profielbronnen: huidige is '%1'" #~ msgid "Deselect '%1'" #~ msgstr "'%1' deselecteren" #~ msgid "Select '%1'" #~ msgstr "Selecteer '%1'" #~ msgid "Select All Parts" #~ msgstr "Alle profielbronnen selecteren" #~ msgid "Visible Parts" #~ msgstr "Zichtbare profielbronnen" #~ msgid "Hide Selected Parts" #~ msgstr "Geselecteerde profielbronnen verbergen" #~ msgid "Unhide Hidden Parts" #~ msgstr "Verborgen profielbronnen tonen" #~ msgid "Go to '%1'" #~ msgstr "Ga naar %1" #~ msgid "Visualization" #~ msgstr "Visualisatie" #~ msgid "Partitioning Mode" #~ msgstr "Weergavemodus voor details" #~ msgid "Diagram Mode" #~ msgstr "Diagrammodus" #~ msgid "Zoom Function" #~ msgstr "Alleen functiekosten" #~ msgid "Show Direct Calls" #~ msgstr "Directe aanroepen tonen" #~ msgid "Increment Shown Call Levels" #~ msgstr "Getoonde aanroepniveaus verhogen" #~ msgid "Draw Names" #~ msgstr "Namen tonen" #~ msgid "Draw Costs" #~ msgstr "Kosten tonen" #~ msgid "Ignore Proportions" #~ msgstr "Proporties negeren" #~ msgid "Draw Frames" #~ msgstr "Frames tekenen" #~ msgid "Allow Rotation" #~ msgstr "Rotatie toestaan" #~ msgid "Hide Info" #~ msgstr "Informatie verbergen" #~ msgid "Show Info" #~ msgstr "Informatie tonen" #~ msgid "(no trace loaded)" #~ msgstr "(geen trace geladen)" #~ msgid "Jump %1 of %2 times to %3" #~ msgstr "Sprong %1 van %2 naar %3" #~ msgid "Jump %1 times to %2" #~ msgstr "Sprong %1 naar %2" #~ msgid "(%1 item skipped)" #~ msgid_plural "(%1 items skipped)" #~ msgstr[0] "(%1 item overgeslagen)" #~ msgstr[1] "(%1 items overgeslagen)" #~ msgid "No description available" #~ msgstr "Geen beschrijving beschikbaar" #~ msgid "" #~ "The Parts OverviewA trace consists of multiple trace parts when " #~ "there are several profile data files from one profile run. The Trace Part " #~ "Overview dockable shows these, horizontally ordered in execution time; " #~ "the rectangle sizes are proportional to the total cost spent in the " #~ "parts. You can select one or several parts to constrain all costs shown " #~ "to these parts only.
The parts are further subdivided: there is a " #~ "partitioning and an callee split mode:
Een trace bestaat vaak uit verschillende " #~ "trace-parts wanneer er meerdere profieldata-bestanden zijn binnen de " #~ "profieluitvoering. Dit aankoppelbare venster toont deze horizontaal " #~ "geordend op uitvoertijd. De rechthoekgroottes zijn proportioneel aan de " #~ "totale kosten uitgegeven in de profielbronnen. U kunt een of meerdere " #~ "profielbronnen selecteren om alle kosten te beperken tot die " #~ "profielbronnen.
De uit de profielbronnen ontstane rechthoeken zijn " #~ "op weergavemodus verder onderverdeeld:
The flat profile contains a group and a " #~ "function selection list. The group list contains all groups where costs " #~ "are spent in, depending on the chosen group type. The group list is " #~ "hidden when group type 'Function' is selected.
The function list " #~ "contains the functions of the selected group (or all for 'Function' group " #~ "type), ordered by the costs spent therein. Functions with costs less than " #~ "1% are hidden on default.
" #~ msgstr "" #~ "Het kostenprofielHet kostenprofiel bevat een gesorteerde lijst " #~ "voor functiegroepen en functies. De groepenlijst bevat alle groepen met " #~ "de daarin uitgegeven kosten, afhankelijk van het gekozen groepstype. De " #~ "groepenlijst is verborgen wanneer het groepstype 'Functie' is " #~ "geselecteerd.
De functielijst bevat de functies van de " #~ "geselecteerde groep (of alle voor groepstype 'Functie'), geordend op de " #~ "erin uitgegeven kosten. Functies met kosten minder dan 1% worden " #~ "standaard verborgen.
" #~ msgid "Show Relative Costs" #~ msgstr "Relatieve kosten tonen" #~ msgid "Show Absolute Costs" #~ msgstr "Absolute kosten tonen" #~ msgid "Skip Cycle Detection" #~ msgstr "Cyclusbepaling overslaan" #~ msgid "Cost 2" #~ msgstr "Kosten 2" #~ msgid "Hex" #~ msgstr "Hex" #~ msgid "Assembler" #~ msgstr "Assembler" #~ msgid "Source Position" #~ msgstr "Broncodepositie" #~ msgid "" #~ "Annotated AssemblerThe annotated assembler list shows the " #~ "machine code instructions of the current selected function together with " #~ "(self) cost spent while executing an instruction. If this is a call " #~ "instruction, lines with details on the call happening are inserted into " #~ "the source: the cost spent inside of the call, the number of calls " #~ "happening, and the call destination.
The disassembler output shown " #~ "is generated with the 'objdump' utility from the 'binutils' package." #~ "p>
Select a line with call information to make the destination function " #~ "of this call current.
" #~ msgstr "" #~ "Geannoteerde machinecodeDe geannoteerde machinecodelijst laat " #~ "de machinecode-instructies van de huidig geselecteerde functie zien, " #~ "samen met (de eigen) kosten gespendeerd gedurende het uitvoeren van een " #~ "instructie. Als het een aanroepinstructie betreft worden regels die " #~ "details bevatten over de aanroep ingevoegd in de broncode. Dit zijn de " #~ "(cumulatieve) kosten gespendeerd binnen de aanroep, het aantal aanroepen " #~ "en het doel van de aanroep.
De gedisassembleerde uitvoer die wordt " #~ "getoond is met de 'objdump' utility uit het pakket 'binutils' gegenereerd." #~ "
Selecteer een regel met aanroepinformatie om de aangeroepen " #~ "functie de huidige functie te maken
" #~ msgid "Go to Address %1" #~ msgstr "Ga naar adres %1" #~ msgid "Hex Code" #~ msgstr "Hexcode" #~ msgid "There is no instruction info in the profile data file." #~ msgstr "" #~ "Er bevindt zich geen instructie-informatie in het profielgegevens-bestand." #~ msgid "For the Valgrind Calltree Skin, rerun with option" #~ msgstr "Om de Valgrind Calltree Skin te gebruiken, herstart met optie" #~ msgid " --dump-instr=yes" #~ msgstr " --dump-instr=yes" #~ msgid "To see (conditional) jumps, additionally specify" #~ msgstr "Om (conditionele) sprongen te zien specificeer aanvullend" #~ msgid " --trace-jump=yes" #~ msgstr " --trace-jump=yes" #~ msgid "There is an error trying to execute the command" #~ msgstr "Er is een fout opgetreden bij het uitvoeren van het commando" #~ msgid "Check that you have installed 'objdump'." #~ msgstr "Controleer of u 'objdump' op deze machine hebt geïnstalleerd." #~ msgid "This utility can be found in the 'binutils' package." #~ msgstr "Dit gereedschap bevindt zich in het 'binutils' pakket." #~ msgid "(No Assembler)" #~ msgstr "(Geen assembler)" #~ msgid "There is %1 cost line without assembler code." #~ msgid_plural "There are %1 cost lines without assembler code." #~ msgstr[0] "Er is %1 kostenregel zonder assemblercode." #~ msgstr[1] "Er zijn %1 kostenregels zonder assemblercode." #~ msgid "This happens because the code of" #~ msgstr "Dit gebeurt omdat de code van" #~ msgid "does not seem to match the profile data file." #~ msgstr "niet overeenkomstig lijkt te zijn met het profielgegevens-bestand." #~ msgid "Are you using an old profile data file or is the above mentioned" #~ msgstr "" #~ "Gebruikt u een oud profielgegevens-bestand of is het hierboven vermelde" #~ msgid "ELF object from an updated installation/another machine?" #~ msgstr "ELF-object van een bijgewerkte installatie of een andere machine?" #~ msgid "There seems to be an error trying to execute the command" #~ msgstr "" #~ "Er is blijkbaar een fout opgetreden bij het uitvoeren van het commando" #~ msgid "Check that the ELF object used in the command exists." #~ msgstr "" #~ "Controleer of het ELF-object dat u gebruikt in het commando bestaat." #~ msgid "Call(s) from %1" #~ msgstr "Aanroep(en) van %1" #~ msgid "Call(s) to %1" #~ msgstr "Aanroep(en) naar %1" #~ msgid "(unknown call)" #~ msgstr "(onbekende aanroep)" #~ msgid "" #~ "Call Graph around active FunctionDepending on configuration, " #~ "this view shows the call graph environment of the active function. Note: " #~ "the shown cost is only the cost which is spent while the active " #~ "function was actually running; i.e. the cost shown for main() - if it is " #~ "visible - should be the same as the cost of the active function, as that " #~ "is the part of inclusive cost of main() spent while the active function " #~ "was running.
For cycles, blue call arrows indicate that this is an " #~ "artificial call added for correct drawing which actually never happened." #~ "p>
If the graph is larger than the widget area, an overview panner is " #~ "shown in one edge. There are similar visualization options to the Call " #~ "Treemap; the selected function is highlighted.
" #~ msgstr "" #~ "Aanroepgrafiek rond actieve functieAfhankelijk van de " #~ "configuratie laat dit venster een aanroepgrafiek van de actieve functie " #~ "zien. Opmerking: de getoonde kosten zijn alleen de kosten " #~ "gespendeerd terwijl de actieve functie uitgevoerd werd, dat wil zeggen " #~ "dat de getoonde kosten voor main() - als main() zichtbaar is - dezelfde " #~ "zouden moeten zijn als de kosten van de actieve functie, omdat dat de " #~ "inclusieve kosten zijn voor main() gespendeerd terwijl de actieve functie " #~ "uitgevoerd werd.
Voor cycli geven de blauwe pijlen aan dat dit een " #~ "kunstmatige aanroep is die is toegevoegd om correct te kunnen tekenen, " #~ "maar die in feite niet is uitgevoerd.
Als de grafiek groter is dan " #~ "het oppervlak van het venster, wordt een overzichtsvenster getoond aan " #~ "één kant van de grafiek. Er zijn vergelijkbare visualisatieopties voor de " #~ "aanroepen-treemap; de geselecteerde functie is gemarkeerd.
" #~ msgid "" #~ "Warning: a long lasting graph layouting is in progress.\n" #~ "Reduce node/edge limits for speedup.\n" #~ msgstr "" #~ "Waarschuwing: een langdurig grafisch proces is in uitvoering.\n" #~ "Reduceer node/edge limits om het sneller te laten verlopen.\n" #~ msgid "Layouting stopped.\n" #~ msgstr "Opmaken onderbroken.\n" #~ msgid "The call graph has %1 nodes and %2 edges.\n" #~ msgstr "De grafische aanroep heeft %1 nodes en %2 edges.\n" #~ msgid "No item activated for which to draw the call graph." #~ msgstr "" #~ "Geen element geactiveerd waarvoor de aanroepgraaf kan worden getoond." #~ msgid "No call graph can be drawn for the active item." #~ msgstr "Geen aanroepgraaf kan getoond worden voor het actieve item." #~ msgid "" #~ "No call graph is available because the following\n" #~ "command cannot be run:\n" #~ "'%1'\n" #~ msgstr "" #~ "Geen aanroepgraaf is beschikbaar doordat het volgende\n" #~ "commando niet uitgevoerd kan worden:\n" #~ "'%1'\n" #~ msgid "Please check that 'dot' is installed (package GraphViz)." #~ msgstr "Controleer of 'dot' is geïnstalleerd (pakket GraphViz)." #~ msgid "Error running the graph layouting tool.\n" #~ msgstr "Fout bij het uitvoeren van het grafische hulpprogramma.\n" #~ msgid "" #~ "There is no call graph available for function\n" #~ "\t'%1'\n" #~ "because it has no cost of the selected event type." #~ msgstr "" #~ "Er is geen graaf van aanroepen beschikbaar voor functie\n" #~ "\t'%1'\n" #~ "omdat er geen kosten van het geselecteerde gebeurtenistype zijn." #~ msgid "Unlimited" #~ msgstr "Onbeperkt" #~ msgctxt "Depth 0" #~ msgid "None" #~ msgstr "Geen" #~ msgid "max. 2" #~ msgstr "max. 2" #~ msgid "max. 5" #~ msgstr "max. 5" #~ msgid "max. 10" #~ msgstr "max. 10" #~ msgid "max. 15" #~ msgstr "max. 15" #~ msgid "No Minimum" #~ msgstr "Geen minimum" #~ msgid "50 %" #~ msgstr "50 %" #~ msgid "20 %" #~ msgstr "20 %" #~ msgid "10 %" #~ msgstr "10 %" #~ msgid "5 %" #~ msgstr "5 %" #~ msgid "2 %" #~ msgstr "2 %" #~ msgid "1 %" #~ msgstr "1 %" #~ msgid "Same as Node" #~ msgstr "Als knoop" #~ msgid "50 % of Node" #~ msgstr "50 % van knoop" #~ msgid "20 % of Node" #~ msgstr "20 % van knoop" #~ msgid "10 % of Node" #~ msgstr "10 % van knoop" #~ msgid "Top Left" #~ msgstr "Linksboven" #~ msgid "Top Right" #~ msgstr "Rechtsboven" #~ msgid "Bottom Left" #~ msgstr "Linksonder" #~ msgid "Bottom Right" #~ msgstr "Rechtsonder" #~ msgid "Top to Down" #~ msgstr "Van boven naar beneden" #~ msgid "Left to Right" #~ msgstr "Links naar rechts" #~ msgid "Circular" #~ msgstr "Cirkelvormig" #~ msgid "Stop Layouting" #~ msgstr "Stop opmaken" #~ msgid "As PostScript" #~ msgstr "Als Postscript" #~ msgid "As Image ..." #~ msgstr "Als afbeelding..." #~ msgid "Export Graph" #~ msgstr "Grafiek exporteren" #~ msgid "Caller Depth" #~ msgstr "Aanroeperdiepte" #~ msgid "Callee Depth" #~ msgstr "Aanroepdiepte" #~ msgid "Min. Node Cost" #~ msgstr "Min. knoopkosten" #~ msgid "Min. Call Cost" #~ msgstr "Min. aanroepkosten" #~ msgid "Arrows for Skipped Calls" #~ msgstr "Pijlen voor overgeslagen aanroepen" #~ msgid "Inner-cycle Calls" #~ msgstr "Intra-cyclus aanroepen" #~ msgid "Cluster Groups" #~ msgstr "Clustergroepen" #~ msgid "Compact" #~ msgstr "Compact" #~ msgid "Normal" #~ msgstr "Normaal" #~ msgid "Tall" #~ msgstr "Hoog" #~ msgid "Graph" #~ msgstr "Grafiek" #~ msgid "Layout" #~ msgstr "Indeling" #~ msgid "Birds-eye View" #~ msgstr "Vogelvlucht" #~ msgid "(%1 function skipped)" #~ msgid_plural "(%1 functions skipped)" #~ msgstr[0] "(%1 functie overgeslagen)" #~ msgstr[1] "(%1 functies overgeslagen)" #~ msgid "Move to Top" #~ msgstr "Ga naar het begin" #~ msgctxt "Move to Top" #~ msgid "Top" #~ msgstr "Boven" #~ msgid "Move to Right" #~ msgstr "Ga naar rechts" #~ msgctxt "Move to Right" #~ msgid "Right" #~ msgstr "Rechts" #~ msgid "Move to Bottom" #~ msgstr "Ga naar het einde" #~ msgctxt "Move to Bottom" #~ msgid "Bottom" #~ msgstr "Onder" #~ msgid "Move to Bottom Left" #~ msgstr "Ga naar linksonder" #~ msgctxt "Move to Bottom Left" #~ msgid "Bottom Left" #~ msgstr "Linksonder" #~ msgid "Move Area To" #~ msgstr "Gebied verplaatsen naar" #~ msgid "Hide This Tab" #~ msgstr "Dit tabblad verbergen" #~ msgid "Hide Area" #~ msgstr "Gebied verbergen" #~ msgctxt "Show on Top" #~ msgid "Top" #~ msgstr "Boven" #~ msgctxt "Show on Right" #~ msgid "Right" #~ msgstr "Rechts" #~ msgctxt "Show on Bottom" #~ msgid "Bottom" #~ msgstr "Onder" #~ msgctxt "Show on Bottom Left" #~ msgid "Bottom Left" #~ msgstr "Linksonder" #~ msgid "Show Hidden On" #~ msgstr "Verborgen tonen" #~ msgid "(No profile data file loaded)" #~ msgstr "(Geen profielgegevensbestand geladen)" #~ msgid "Types" #~ msgstr "Typen" #~ msgid "Callers" #~ msgstr "Aanroepers" #~ msgid "All Callers" #~ msgstr "Alle aanroepers" #~ msgid "Caller Map" #~ msgstr "Aanroeperskaart" #~ msgid "Source Code" #~ msgstr "Broncode" #~ msgid "Parts" #~ msgstr "Profieldelen" #~ msgid "Call Graph" #~ msgstr "Aanroepgrafiek" #~ msgid "Callees" #~ msgstr "Aangeroepenen" #~ msgid "All Callees" #~ msgstr "Alle aangeroepenen" #~ msgid "Callee Map" #~ msgstr "Aangeroepenenkaart" #~ msgid "Assembly Code" #~ msgstr "Assemblercode" #~ msgid "" #~ "Information TabsThis widget shows information for the current " #~ "selected function in different tabs:
De volgende tabbladen geven informatie over " #~ "de geselecteerde functie:
The annotated source list shows the source " #~ "lines of the current selected function together with (self) cost spent " #~ "while executing the code of this source line. If there was a call in a " #~ "source line, lines with details on the call happening are inserted into " #~ "the source: the cost spent inside of the call, the number of calls " #~ "happening, and the call destination.
Select a inserted call " #~ "information line to make the destination function current.
" #~ msgstr "" #~ "Geannoteerde broncodeDe geannoteerde broncode laat de broncode " #~ "van de geselecteerde functie zien, samen met de kosten, gespendeerd voor " #~ "het uitvoeren van de regel broncode. Als er een aanroep in de broncode is " #~ "geschied zullen er extra regels worden ingevoegd met details betreffende " #~ "de aanroep. Deze details zijn de (cumulatieve) kosten van de aanroep, het " #~ "aantal uitgevoerde aanroepen en het doel van de aanroep.
Selecteer " #~ "een ingevoegde aanroepregel om de doelfunctie te selecteren.
" #~ msgid "Go to Line %1" #~ msgstr "Ga naar regel %1" #~ msgid "(No Source)" #~ msgstr "(Geen broncode)" #~ msgid "There is no cost of current selected type associated" #~ msgstr "Er zijn geen kosten van het geselecteerde type verbonden" #~ msgid "with any source line of this function in file" #~ msgstr "aan een regel in de broncode voor deze functie in het bestand" #~ msgid "Thus, no annotated source can be shown." #~ msgstr "Daarom kan geen geannoteerde broncode worden getoond." #~ msgid "Source ('%1')" #~ msgstr "Broncode (%1)" #~ msgid "--- Inlined from '%1' ---" #~ msgstr "--- inline van %1 ---" #~ msgid "--- Inlined from unknown source ---" #~ msgstr "--- Inline van onbekende bron ---" #~ msgid "There is no source available for the following function:" #~ msgstr "Er is geen broncode beschikbaar voor de volgende functie:" #~ msgid "This is because no debug information is present." #~ msgstr "Dit komt omdat er geen debug-informatie aanwezig is." #~ msgid "Recompile source and redo the profile run." #~ msgstr "Hercompileer de broncode en maak een nieuw profiel." #~ msgid "The function is located in this ELF object:" #~ msgstr "De functie bevindt zich in dit ELF-object:" #~ msgid "This is because its source file cannot be found:" #~ msgstr "Dit komt omdat haar broncodebestand niet kan worden gevonden:" #~ msgid "Add the folder of this file to the source folder list." #~ msgstr "Voeg de map toe van dit bestand aan de broncodemappenlijst." #~ msgid "The list can be found in the configuration dialog." #~ msgstr "De lijst kan worden gevonden in de instellingendialoog." #~ msgid " (Thread %1)" #~ msgstr "(Thread %1)" #~ msgid "(none)" #~ msgstr "(geen)" #~ msgid "Unknown Type" #~ msgstr "Onbekend type" #~ msgid "Show All Items" #~ msgstr "Alle elementen tonen" #~ msgid "No Grouping" #~ msgstr "Geen groepering" #~ msgid "Distance" #~ msgstr "Afstand" #~ msgid "Caller" #~ msgstr "Aanroeper" #~ msgid "Self" #~ msgstr "Zelf" #~ msgid "Calling" #~ msgstr "Aanroepen" #~ msgid "Callee" #~ msgstr "Aangeroepene" #~ msgid "" #~ "List of all CallersThis list shows all functions calling the " #~ "current selected one, either directly or with several functions in-" #~ "between on the stack; the number of functions in-between plus one is " #~ "called the Distance (e.g. for function A,B,C there exists a call " #~ "from A to C when A calls B and B calls C, i.e. A => B => C. The distance " #~ "here is 2).
Absolute cost shown is the cost spent in the selected " #~ "function while a listed function is active; relative cost is the " #~ "percentage of all cost spent in the selected function while the listed " #~ "one is active. The cost graphic shows logarithmic percentage with a " #~ "different color for each distance.
As there can be many calls from " #~ "the same function, the distance column sometimes shows the range of " #~ "distances for all calls happening; then, in parentheses, there is the " #~ "medium distance, i.e. the distance where most of the call costs happened." #~ "
Selecting a function makes it the current selected one of this " #~ "information panel. If there are two panels (Split mode), the function of " #~ "the other panel is changed instead.
" #~ msgstr "" #~ "Lijst van alle aanroepersDeze lijst laat alle functies zien die " #~ "de geselecteerde functie aanroepen, hetzij direct, hetzij door " #~ "tussenkomst van andere functies. Het aantal functies tussen een " #~ "aanroepende functie en de geselecteerde functie plus 1 is de Afstand" #~ "em>, dat wil zeggen, als er voor functies A, B en C een aanroep van A " #~ "naar C bestaat, zodanig dat functie A functie B aanroept en functie B " #~ "functie C aanroept, dan is de afstand gelijk aan 2.
De absolute " #~ "kosten voor de functie zijn de kosten gespendeerd terwijl de " #~ "geselecteerde functie actief was; de relatieve kosten is het percentage " #~ "van alle kosten gespendeerd in de geselecteerde functie terwijl de " #~ "aangegeven functie actief was. De kostengrafiek laat een logaritmisch " #~ "percentage met een afzonderlijke kleur voor elke afstand zien." #~ "p>
Omdat het mogelijk is dat een functie zeer vaak wordt aangeroepen " #~ "wordt er soms een afstandsbereik getoond met tussen haakjes de mediale " #~ "afstand van de functies die in dat bereik vallen. De mediale afstand is " #~ "die afstand vanwaar de meeste aanroepen worden gedaan.
Als u een " #~ "functie selecteert wordt deze de huidig geselecteerde functie. Als er " #~ "twee panelen zijn (gesplitste modus) dan wordt de functie in het andere " #~ "paneel als geselecteerd gekozen.
" #~ msgid "" #~ "List of all CalleesThis list shows all functions called by the " #~ "current selected one, either directly or with several function in-between " #~ "on the stack; the number of function in-between plus one is called the " #~ "Distance (e.g. for function A,B,C there exists a call from A to " #~ "C when A calls B and B calls C, i.e. A => B => C. The distance here is 2)." #~ "
Absolute cost shown is the cost spent in the listed function while " #~ "the selected is active; relative cost is the percentage of all cost spent " #~ "in the listed function while the selected one is active. The cost graphic " #~ "always shows logarithmic percentage with a different color for each " #~ "distance.
As there can be many calls to the same function, the " #~ "distance column sometimes shows the range of distances for all calls " #~ "happening; then, in parentheses, there is the medium distance, i.e. the " #~ "distance where most of the call costs happened.
Selecting a " #~ "function makes it the current selected one of this information panel. If " #~ "there are two panels (Split mode), the function of the other panel is " #~ "changed instead.
" #~ msgstr "" #~ "Lijst van alle aangeroepenenDeze lijst laat alle functies zien " #~ "die door de geselecteerde functie worden aanroepen, hetzij direct hetzij " #~ "door tussenkomst van andere functies. Het aantal functies tussen een " #~ "aanroepende functie en de geselecteerde functie plus 1 is de Afstand" #~ "em>, dat wil zeggen, als er voor functies A, B en C een aanroep van A " #~ "naar C bestaat zodanig dat functie A functie B aanroept en functie B " #~ "functie C aanroept, dan is de afstand gelijk aan 2.
De absolute " #~ "kosten voor de aangegeven functie zijn de kosten gespendeerd terwijl de " #~ "geselecteerde functie actief was; de relatieve kosten is het percentage " #~ "van alle kosten gespendeerd in de aangegeven functie terwijl de huidig " #~ "geselecteerde functie actief was. De kostengrafiek laat een logaritmisch " #~ "percentage met een afzonderlijke kleur voor elke afstand zien." #~ "p>
Omdat het mogelijk is dat een functie zeer vaak wordt aangeroepen " #~ "wordt er soms een afstandsbereik getoond met tussen haakjes de mediale " #~ "afstand van de functies die in dat bereik vallen. De mediale afstand is " #~ "die afstand vanwaar de meeste aanroepen worden gedaan.
Als u een " #~ "functie selecteert wordt deze de huidig geselecteerde functie. Als er " #~ "twee panelen zijn (gesplitste modus) dan wordt de functie in het andere " #~ "paneel als geselecteerd gekozen.
" #~ msgid "Instruction Fetch" #~ msgstr "Instructie fetch" #~ msgid "Data Read Access" #~ msgstr "Gegevensleestoegang" #~ msgid "Data Write Access" #~ msgstr "Gegevensschrijftoegang" #~ msgid "L1 Instr. Fetch Miss" #~ msgstr "L1 Instr.Fetch Mis" #~ msgid "L1 Data Read Miss" #~ msgstr "L1 Data Lees mis" #~ msgid "L1 Data Write Miss" #~ msgstr "L1 Data Schrijf mis" #~ msgid "L2 Instr. Fetch Miss" #~ msgstr "L2 Instr fetch mis" #~ msgid "L2 Data Read Miss" #~ msgstr "L2 Data Lees mis" #~ msgid "L2 Data Write Miss" #~ msgstr "L2 Data Schrijf mis" #~ msgid "Samples" #~ msgstr "Steekproeven" #~ msgid "System Time" #~ msgstr "Systeemtijd" #~ msgid "User Time" #~ msgstr "Gebruikerstijd" #~ msgid "L1 Miss Sum" #~ msgstr "L1 Gemist totaal" #~ msgid "L2 Miss Sum" #~ msgstr "L2 Gemist totaal" #~ msgid "Cycle Estimation" #~ msgstr "Cyclusschatting" #~ msgid "&Search:" #~ msgstr "&Zoeken:" #~ msgid "Group" #~ msgstr "Groep" #~ msgid "(no trace parts)" #~ msgstr "(geen profieldelen)" #~ msgid "Stack Selection" #~ msgstr "Stack selectie" #~ msgid "Cost2" #~ msgstr "Kosten2" #~ msgid "Text %1" #~ msgstr "Tekst %1" #~ msgid "Recursive Bisection" #~ msgstr "Recursieve bisectie" #~ msgid "Columns" #~ msgstr "Kolommen" #~ msgid "Rows" #~ msgstr "Rijen" #~ msgid "Always Best" #~ msgstr "Altijd beste" #~ msgid "Best" #~ msgstr "Beste" #~ msgid "Alternate (V)" #~ msgstr "Alternatief (V)" #~ msgid "Alternate (H)" #~ msgstr "Alternatief (H)" #~ msgid "Horizontal" #~ msgstr "Horizontaal" #~ msgid "Vertical" #~ msgstr "Verticaal" #~ msgid "Nesting" #~ msgstr "Genest" #~ msgid "Border" #~ msgstr "Rand" #~ msgid "Correct Borders Only" #~ msgstr "Alleen randen corrigeren" #~ msgid "Width %1" #~ msgstr "Breedte %1" #~ msgid "Shading" #~ msgstr "Schaduw" #~ msgid "Visible" #~ msgstr "Zichtbaar" #~ msgid "Take Space From Children" #~ msgstr "Ruimte van subitems gebruiken" #~ msgid "Top Center" #~ msgstr "Middenboven" #~ msgid "Bottom Center" #~ msgstr "Middenonder" #~ msgid "No %1 Limit" #~ msgstr "Geen limiet voor %1" #~ msgid "No Area Limit" #~ msgstr "Geen gebiedslimiet" #~ msgid "Area of '%1' (%2)" #~ msgstr "Gebied van '%1' (%2)" #~ msgid "1 Pixel" #~ msgid_plural "%1 Pixels" #~ msgstr[0] "1 pixel" #~ msgstr[1] "%1 pixels" #~ msgid "Double Area Limit (to %1)" #~ msgstr "Gebiedslimiet verdubbelen (naar %1)" #~ msgid "Halve Area Limit (to %1)" #~ msgstr "Gebiedslimiet halveren (tot %1)" #~ msgid "No Depth Limit" #~ msgstr "Geen dieptelimiet" #~ msgid "Depth of '%1' (%2)" #~ msgstr "Diepte van '%1' (%2)" #~ msgid "Depth %1" #~ msgstr "Diepte %1" #~ msgid "Decrement (to %1)" #~ msgstr "Verminderen (tot %1)" #~ msgid "Increment (to %1)" #~ msgstr "Vermeerderen (tot %1)" #~ msgid "" #~ "Caller MapThis graph shows the nested hierarchy of all callers " #~ "of the current activated function. Each colored rectangle represents a " #~ "function; its size tries to be proportional to the cost spent therein " #~ "while the active function is running (however, there are drawing " #~ "constrains).
" #~ msgstr "" #~ "AanroeperskaartDeze grafiek laat een geneste hiërarchie zien " #~ "van alle aanroepers van de huidig geselecteerde functie. Elke gekleurde " #~ "rechthoek representeert een functie. De afmeting tracht proportioneel te " #~ "zijn met de kosten gespendeerd in die functie terwijl de actieve functie " #~ "loopt (hoewel er beperkingen zijn aan de accuratesse van de afbeelding)" #~ "p>" #~ msgid "" #~ "Call Map
This graph shows the nested hierarchy of all callees of " #~ "the current activated function. Each colored rectangle represents a " #~ "function; its size tries to be proportional to the cost spent therein " #~ "while the active function is running (however, there are drawing " #~ "constrains).
" #~ msgstr "" #~ "AanroepenkaartDeze grafiek laat een geneste hiërarchie zien van " #~ "alle aangeroepen functies van de huidige geselecteerde functie. Elke " #~ "gekleurde rechthoek representeert een functie. De afmeting tracht " #~ "proportioneel te zijn met de kosten gespendeerd in die functie terwijl de " #~ "actieve functie loopt (hoewel er beperkingen zijn aan de accuratesse van " #~ "de afbeelding)
" #~ msgid "" #~ "Appearance options can be found in the in the context menu. To get " #~ "exact size proportions, choose 'Hide incorrect borders'. As this mode can " #~ "be very time consuming, you may want to limit the maximum drawn " #~ "nesting level before. 'Best' determinates the split direction for " #~ "children from the aspect ratio of the parent. 'Always Best' decides on " #~ "remaining space for each sibling. 'Ignore Proportions' takes space for " #~ "function name drawing before drawing children. Note that size " #~ "proportions can get heavily wrong.
This is a TreeMap" #~ "em> widget. Keyboard navigation is available with the left/right arrow " #~ "keys for traversing siblings, and up/down arrow keys to go a nesting " #~ "level up/down. Return activates the current item.
" #~ msgstr "" #~ "Weergave-opties kunnen worden gevonden in het contextmenu. Om exacte " #~ "afmetingen te krijgen kiest u 'Verberg incorrecte randen'. Omdat het " #~ "tekenen in deze modus zeer tijdrovend kan zijn is het raadzaam " #~ "het maximale aantal nestingniveaus van tevoren beperken. 'Beste' bepaalt " #~ "de splitsingrichting van de kinderen aan de hand van de " #~ "afbeeldingverhouding van het bovenliggende element. 'Altijd beste' " #~ "bepaalt op basis van de voor kinderen overgebleven ruimte. 'XXXIgnore " #~ "Proporties' gebruikt ruimte om de functienaam te tekenen voordat " #~ "de kinderen worden getekend. Merk op dat de afbeeldingproporties " #~ "bijzonder kunnen afwijken van de daadwerkelijke proporties." #~ "p>
Dit is een treemap interface-element. Toetsenbordnavigatie " #~ "is mogelijk met de toetsen cursor rechts en cursor links om te itereren " #~ "binnen een gelijk generatieniveau terwijl de toetsen cursor omhoog en " #~ "cursor omlaag worden gebruikt om een nestingniveau omhoog en omlaag " #~ "bewerkstelligen. De Return toets activeert het huidige element." #~ "p>" #~ msgid "Go To" #~ msgstr "Ga naar" #~ msgid "Stop at Depth" #~ msgstr "Stoppen bij diepte" #~ msgid "Depth 10" #~ msgstr "Diepte 10" #~ msgid "Depth 15" #~ msgstr "Diepte 15" #~ msgid "Depth 20" #~ msgstr "Diepte 20" #~ msgid "Decrement Depth (to %1)" #~ msgstr "Verminder diepte (tot %1)" #~ msgid "Increment Depth (to %1)" #~ msgstr "Vermeerder diepte (tot %1)" #~ msgid "Stop at Function" #~ msgstr "Stop bij functie" #~ msgid "No Function Limit" #~ msgstr "Geen functielimiet" #~ msgid "Stop at Area" #~ msgstr "Stoppen bij gebied" #~ msgid "50 Pixels" #~ msgstr "50 pixels" #~ msgid "100 Pixels" #~ msgstr "100 pixels" #~ msgid "200 Pixels" #~ msgstr "200 pixels" #~ msgid "500 Pixels" #~ msgstr "500 pixels" #~ msgid "Half Area Limit (to %1)" #~ msgstr "Gebiedslimiet halveren (tot %1)" #~ msgid "Split Direction" #~ msgstr "Splits richting" #~ msgid "Skip Incorrect Borders" #~ msgstr "Foute randen overslaan" #~ msgid "Border Width" #~ msgstr "Randbreedte" #~ msgid "Border 0" #~ msgstr "Rand 0" #~ msgid "Border 1" #~ msgstr "Rand 1" #~ msgid "Border 2" #~ msgstr "Rand 2" #~ msgid "Border 3" #~ msgstr "Rand 3" #~ msgid "Draw Symbol Names" #~ msgstr "Teken symboolnamen" #~ msgid "Draw Cost" #~ msgstr "Teken kosten" #~ msgid "Draw Location" #~ msgstr "Teken locatie" #~ msgid "Draw Calls" #~ msgstr "Teken aanroepen" #~ msgid "Call Map: Current is '%1'" #~ msgstr "Aanroepkaart: Huidige is '%1'" #~ msgid "(no function)" #~ msgstr "(geen functie)" #~ msgid "(no call)" #~ msgstr "(geen aanroep)" #~ msgid "Event Type" #~ msgstr "Gebeurtenistype" #~ msgid "Short" #~ msgstr "Kort" #~ msgid "Formula" #~ msgstr "Formule" #~ msgid "" #~ "Cost Types List
This list shows all cost types available and " #~ "what the self/inclusive cost of the current selected function is for that " #~ "cost type.
By choosing a cost type from the list, you change the " #~ "cost type of costs shown all over KCachegrind to be the selected one.
" #~ msgstr "" #~ "Lijst met kostentypesDeze lijst toont alle beschikbare " #~ "kostentypes en wat de inclusieve en exclusieve kosten zijn van de " #~ "momenteel geselecteerde functie.
Door een kostentype te selecteren " #~ "in de lijst verandert u het type van alle kosten die in KCachegrind " #~ "worden getoond in die van het geselecteerde type.
" #~ msgid "Set Secondary Event Type" #~ msgstr "Secundair gebeurtenistype instellen" #~ msgid "Remove Secondary Event Type" #~ msgstr "Secundair gebeurtenistype verwijderen" #~ msgid "Edit Long Name" #~ msgstr "Lange naam bewerken" #~ msgid "Edit Short Name" #~ msgstr "Korte naam bewerken" #~ msgid "Edit Formula" #~ msgstr "Formule bewerken" #~ msgid "Remove" #~ msgstr "Verwijderen" #~ msgid "New Cost Type ..." #~ msgstr "Nieuw kostentype..." #~ msgid "New%1" #~ msgstr "Nieuw%1" #~ msgid "New Cost Type %1" #~ msgstr "Nieuw kostentype %1" #~ msgid "Import filter for Cachegrind/Callgrind generated profile data files" #~ msgstr "" #~ "Importfilter voor door Cachegrind/Callgrind gegenereerde profielgegevens-" #~ "bestanden" #~ msgid "Count" #~ msgstr "Aantal" #~ msgid "" #~ "List of direct CallersThis list shows all functions calling the " #~ "current selected one directly, together with a call count and the cost " #~ "spent in the current selected function while being called from the " #~ "function from the list.
An icon instead of an inclusive cost " #~ "specifies that this is a call inside of a recursive cycle. An inclusive " #~ "cost makes no sense here.
Selecting a function makes it the current " #~ "selected one of this information panel. If there are two panels (Split " #~ "mode), the function of the other panel is changed instead.
" #~ msgstr "" #~ "Lijst van directe aanroepersDeze lijst laat alle functies zien " #~ "die de huidig geselecteerde functie zonder tussenkomst van andere " #~ "functies aanroepen samen met het aantal aanroepen en de (cumulatieve) " #~ "kosten gespendeerd in de huidig geselecteerde functie terwijl zij is " #~ "aangeroepen uit de functie in de lijst.
Een icoon in plaats van " #~ "cumulatieve kosten specificeert dat dit een aanroep binnen een recursieve " #~ "cyclus is. Cumulatieve kosten hebben hier geen betekenis
Als u een " #~ "functie selecteert wordt dit de huidig geselecteerde functie. Als er twee " #~ "panelen zijn (Gesplitste modus) wordt de functie in het andere paneel de " #~ "huidig geselecteerde functie in dat paneel.
" #~ msgid "" #~ "List of direct CalleesThis list shows all functions called by " #~ "the current selected one directly, together with a call count and the " #~ "cost spent in this function while being called from the selected function." #~ "
Selecting a function makes it the current selected one of this " #~ "information panel. If there are two panels (Split mode), the function of " #~ "the other panel is changed instead.
" #~ msgstr "" #~ "Lijst van directe aanroepersDeze lijst laat alle functies zien " #~ "die zonder tussenkomst van andere functies worden aangeroepen samen met " #~ "het aantal aanroepen en de (cumulatieve) kosten gespendeerd in deze " #~ "functie gedurende de aanroep van de huidige geselecteerde functie." #~ "p>
Als u een functie selecteert wordt dit de huidig geselecteerde " #~ "functie. Als er twee panelen zijn (Gesplitste modus) wordt de functie in " #~ "het andere paneel de huidig geselecteerde functie in dat paneel.
" #~ msgid "Profile Part %1" #~ msgstr "Profieldeel %1" #~ msgid "(no trace)" #~ msgstr "(geen trace)" #~ msgid "(no part)" #~ msgstr "(geen profieldeel)" #~ msgid "Comment" #~ msgstr "Opmerking" #~ msgid "" #~ "Trace Part ListThis list shows all trace parts of the loaded " #~ "trace. For each part, the self/inclusive cost of the current selected " #~ "function, spent in the part, is shown; percentage costs are always " #~ "relative to the total cost of the part (not to the whole trace " #~ "as in the Trace Part Overview). Also shown are the calls happening to/" #~ "from the current function inside of the trace part.
By choosing one " #~ "or more trace parts from the list, the costs shown all over KCachegrind " #~ "will only be the ones spent in the selected part(s). If no list selection " #~ "is shown, in fact all trace parts are selected implicitly.
This is " #~ "a multi-selection list. You can select ranges by dragging the mouse or " #~ "use SHIFT/CTRL modifiers. Selection/Deselection of trace parts can also " #~ "be done by using the Trace Part Overview Dockable. This one also supports " #~ "multiple selection.
Note that the list is hidden if only one trace " #~ "part is loaded.
" #~ msgstr "" #~ "Lijst van profieldelenDeze lijst laat alle profieldelen van de " #~ "geladen trace zien. Voor elk deel worden de eigen/gecumuleerde kosten " #~ "getoond van het geselecteerde element in dat deel. De procentuele kosten " #~ "worden altijd relatief ten opzichte van de totale kosten van dat " #~ "deel getoond in tegenstelling tot de gehele trace zoals in het Trace " #~ "deel overzicht). Ook het aantal aanroepen van en naar de huidig " #~ "geselecteerde functie binnen het profieldeel worden getoond.
Door " #~ "één of meer profieldelen te kiezen uit de lijst worden de kosten in " #~ "KCachegrind getoond voor de geselecteerde delen. Als geen delen worden " #~ "geselecteerd worden impliciet alle delen gebruikt voor de " #~ "kostencalculatie.
Dit is een lijst waar u meerdere delen kunt " #~ "selecteren. U kunt een bereik van delen selecteren door de muis over de " #~ "delen te slepen of de Shift/Ctrl toetsen te gebruiken terwijl u delen " #~ "selecteert. Selectie en deselectie kan ook worden gedaan in het Trace " #~ "deel window. Ook deze lijst staat u toe meerdere delen te selecteren." #~ "p>
Merk op dat de lijst verborgen is als er maar één tracedeel " #~ "beschikbaar is.
" #~ msgid "Hide '%1'" #~ msgstr "Verberg '%1'" #~ msgid "Hide Selected" #~ msgstr "Verberg geselecteerde elementen" #~ msgid "Show All" #~ msgstr "Alles tonen"