/* * * Copyright (C) 2000 Silicon Graphics, Inc. All Rights Reserved. * * This library is free software; you can redistribute it and/or * modify it under the terms of the GNU Lesser General Public * License as published by the Free Software Foundation; either * version 2.1 of the License, or (at your option) any later version. * * This library is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU * Lesser General Public License for more details. * * Further, this software is distributed without any warranty that it is * free of the rightful claim of any third person regarding infringement * or the like. Any license provided herein, whether implied or * otherwise, applies only to this software file. Patent licenses, if * any, provided herein do not apply to combinations of this program with * other software, or any other product whatsoever. * * You should have received a copy of the GNU Lesser General Public * License along with this library; if not, write to the Free Software * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA * * Contact information: Silicon Graphics, Inc., 1600 Amphitheatre Pkwy, * Mountain View, CA 94043, or: * * http://www.sgi.com * * For further information regarding this notice, see: * * http://oss.sgi.com/projects/GenInfo/NoticeExplan/ * */ /*---------------------------------------------------------------- * This is an example from the Inventor Mentor Programming Guide, * chapter 8, example 4. * * This example creates and displays a Bezier Surface * with trim curves. The surface is identical to the * surface in example 08.3.BezSurf. The SoNurbsProfile * class is used to define the trims. * * One trim curve makes a counter-clockwise square around * the whole surface. Two other trim curves are combined * end to end to cut a hole from the surface. The outside * trim curve and the first inside trim curve are both * order 2 curves and are therefore sets of straight lines * in parameter space. The second inside curve is a * Bezier curve. *----------------------------------------------------------------*/ #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include static char *floorData = "#Inventor V2.0 ascii\n" "Separator {\n" " SpotLight {\n" " cutOffAngle 0.9\n" " dropOffRate 0.2\n" " location 6 12 2\n" " direction 0 -1 0\n" " }\n" " ShapeHints {\n" " faceType UNKNOWN_FACE_TYPE\n" " }\n" " Texture2Transform {\n" " #rotation 1.57\n" " scaleFactor 8 8\n" " }\n" " Texture2 {\n" " filename /usr/share/src/Inventor/examples/data/oak.rgb\n" " }\n" " NormalBinding {\n" " value PER_PART\n" " }\n" " Material { diffuseColor 1 1 1 specularColor 1 1 1 shininess 0.4 }\n" " DEF FloorPanel Separator {\n" " DEF FloorStrip Separator {\n" " DEF FloorBoard Separator {\n" " Normal { vector 0 1 0 }\n" " TextureCoordinate2 {\n" " point [ 0 0, 0.5 0, 0.5 2, 0.5 4, 0.5 6,\n" " 0.5 8, 0 8, 0 6, 0 4, 0 2 ] }\n" " Coordinate3 {\n" " point [ 0 0 0, .5 0 0, .5 0 -2, .5 0 -4, .5 0 -6,\n" " .5 0 -8, 0 0 -8, 0 0 -6, 0 0 -4, 0 0 -2, ]\n" " }\n" " FaceSet { numVertices 10 }\n" " BaseColor { rgb 0.3 0.1 0.0 }\n" " Translation { translation 0.125 0 -0.333 }\n" " Cylinder { parts TOP radius 0.04167 height 0.002 }\n" " Translation { translation 0.25 0 0 }\n" " Cylinder { parts TOP radius 0.04167 height 0.002 }\n" " Translation { translation 0 0 -7.333 }\n" " Cylinder { parts TOP radius 0.04167 height 0.002 }\n" " Translation { translation -0.25 0 0 }\n" " Cylinder { parts TOP radius 0.04167 height 0.002 }\n" " }\n" " Translation { translation 0 0 8.03 }\n" " USE FloorBoard\n" " Translation { translation 0 0 8.04 }\n" " USE FloorBoard\n" " }\n" " Translation { translation 0.53 0 -0.87 }\n" " USE FloorStrip\n" " Translation { translation 0.53 0 -2.3 }\n" " USE FloorStrip\n" " Translation { translation 0.53 0 1.3 }\n" " USE FloorStrip\n" " Translation { translation 0.53 0 1.1 }\n" " USE FloorStrip\n" " Translation { translation 0.53 0 -0.87 }\n" " USE FloorStrip\n" " Translation { translation 0.53 0 1.7 }\n" " USE FloorStrip\n" " Translation { translation 0.53 0 -0.5 }\n" " USE FloorStrip\n" " }\n" " Translation { translation 4.24 0 0 }\n" " USE FloorPanel\n" " Translation { translation 4.24 0 0 }\n" " USE FloorPanel\n" "}"; //////////////////////////////////////////////////////////// // CODE FOR The Inventor Mentor STARTS HERE // The array of trim coordinates float tpts[12][2] = { {0.0, 0.0}, {1.0, 0.0}, {1.0, 1.0}, {0.0, 1.0}, {0.2, 0.2}, {0.2, 0.7}, {0.9, 0.7}, {0.9, 0.2}, {0.7, 0.0}, {0.4, 0.8}}; // The 16 coordinates defining the Bezier surface. float pts[16][3] = { {-4.5, -2.0, 8.0}, {-2.0, 1.0, 8.0}, { 2.0, -3.0, 6.0}, { 5.0, -1.0, 8.0}, {-3.0, 3.0, 4.0}, { 0.0, -1.0, 4.0}, { 1.0, -1.0, 4.0}, { 3.0, 2.0, 4.0}, {-5.0, -2.0, -2.0}, {-2.0, -4.0, -2.0}, { 2.0, -1.0, -2.0}, { 5.0, 0.0, -2.0}, {-4.5, 2.0, -6.0}, {-2.0, -4.0, -5.0}, { 2.0, 3.0, -5.0}, { 4.5, -2.0, -6.0}}; // The 3 knot vectors for the 3 trim curves. float tknots1[7] = {0, 0, 1, 2, 3, 4, 4}; float tknots2[6] = {0, 0, 1, 2, 3, 3}; float tknots3[8] = {0, 0, 0, 0, 1, 1, 1, 1}; // The Bezier knot vector for the surface. // This knot vector is used in both the U and // V directions. float knots[8] = {0, 0, 0, 0, 1, 1, 1, 1}; // Create the nodes needed for the Bezier patch // and its trim curves. SoSeparator * makeSurface() { SoSeparator *surfSep = new SoSeparator(); surfSep->ref(); // Define the Bezier surface including the control // points, trim curve, and a complexity. SoComplexity *complexity = new SoComplexity; SoCoordinate3 *controlPts = new SoCoordinate3; SoNurbsSurface *surface = new SoNurbsSurface; complexity->value = 0.7; controlPts->point.setValues(0, 16, pts); surface->numUControlPoints.setValue(4); surface->numVControlPoints.setValue(4); surface->uKnotVector.setValues(0, 8, knots); surface->vKnotVector.setValues(0, 8, knots); surfSep->addChild(complexity); surfSep->addChild(controlPts); SoProfileCoordinate2 *trimPts = new SoProfileCoordinate2; SoNurbsProfile *nTrim1 = new SoNurbsProfile; SoNurbsProfile *nTrim2 = new SoNurbsProfile; SoNurbsProfile *nTrim3 = new SoNurbsProfile; int32_t trimInds[5]; trimPts->point.setValues(0, 12, tpts); trimInds[0] = 0; trimInds[1] = 1; trimInds[2] = 2; trimInds[3] = 3; trimInds[4] = 0; nTrim1->index.setValues(0, 5, trimInds); nTrim1->knotVector.setValues(0, 7, tknots1); trimInds[0] = 4; trimInds[1] = 5; trimInds[2] = 6; trimInds[3] = 7; nTrim2->linkage.setValue(SoProfile::START_NEW); nTrim2->index.setValues(0, 4, trimInds); nTrim2->knotVector.setValues(0, 6, tknots2); trimInds[0] = 7; trimInds[1] = 8; trimInds[2] = 9; trimInds[3] = 4; nTrim3->linkage.setValue(SoProfile::ADD_TO_CURRENT); nTrim3->index.setValues(0, 4, trimInds); nTrim3->knotVector.setValues(0, 8, tknots3); surfSep->addChild(trimPts); surfSep->addChild(nTrim1); surfSep->addChild(nTrim2); surfSep->addChild(nTrim3); surfSep->addChild(surface); surfSep->unrefNoDelete(); return surfSep; } // CODE FOR The Inventor Mentor ENDS HERE //////////////////////////////////////////////////////////// int main(int, char **argv) { // Initialize Inventor and Xt Widget appWindow = SoXt::init(argv[0]); if (appWindow == NULL) exit(1); SoSeparator *root = new SoSeparator; root->ref(); SoRotation *rot = new SoRotation; rot->rotation.setValue(SbRotation(SbVec3f(0.0, 1.0, 0.0), M_PI/2.0)); root->addChild(rot); // Create the scene graph for the carpet; SoSeparator *carpet = new SoSeparator; SoSeparator *surf = makeSurface(); SoTexture2 *tex = new SoTexture2; tex->ref(); tex->filename.setValue("/usr/share/src/Inventor/examples/data/diamondRug.rgb"); carpet->addChild(tex); carpet->addChild(surf); root->addChild(carpet); // Create the scene graph for the floor SoSeparator *floor = new SoSeparator; SoTranslation *xlate = new SoTranslation; SoScale *scale = new SoScale; SoInput in; SoNode *result; in.setBuffer(floorData, strlen(floorData)); SoDB::read(&in, result); xlate->translation.setValue(SbVec3f(-12.0, -5.0, -5.0)); scale->scaleFactor.setValue(SbVec3f(2.0, 1.0, 2.0)); floor->addChild(xlate); floor->addChild(scale); floor->addChild(result); root->addChild(floor); // Create the scene graph for the carpet's shadow SoSeparator *shadow = new SoSeparator; SoLightModel *shmdl = new SoLightModel; SoMaterial *shmtl = new SoMaterial; SoBaseColor *shclr = new SoBaseColor; SoTranslation *shxl = new SoTranslation; SoScale *shscl = new SoScale; shmdl->model = SoLightModel::BASE_COLOR; shclr->rgb.setValue(SbColor(0.21, 0.15, 0.09)); shmtl->transparency = 0.3; shxl->translation.setValue(SbVec3f(0.0, -4.9, 0.0)); shscl->scaleFactor.setValue(SbVec3f(1.0, 0.0, 1.0)); shadow->addChild(shmtl); shadow->addChild(shmdl); shadow->addChild(shclr); shadow->addChild(shxl); shadow->addChild(shscl); shadow->addChild(surf); root->addChild(shadow); // Initialize an Examiner Viewer SoXtExaminerViewer *viewer = new SoXtExaminerViewer(appWindow); viewer->setSceneGraph(root); viewer->setTitle("Trimmed Nurbs Surface"); SoCamera *cam = viewer->getCamera(); cam->position.setValue(SbVec3f(-8.5, 13.0, 23.0)); cam->pointAt(SbVec3f(-2.0, -2.0, -4.0)); viewer->show(); SoXt::show(appWindow); SoXt::mainLoop(); }