/* * Copyright 2000-2011 Intel Corporation All Rights Reserved * * Permission is hereby granted, free of charge, to any person obtaining a * copy of this software and associated documentation files (the * "Software"), to deal in the Software without restriction, including * without limitation the rights to use, copy, modify, merge, publish, * distribute, sub license, and/or sell copies of the Software, and to * permit persons to whom the Software is furnished to do so, subject to * the following conditions: * * The above copyright notice and this permission notice (including the * next paragraph) shall be included in all copies or substantial portions * of the Software. * * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS * OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT. * IN NO EVENT SHALL PRECISION INSIGHT AND/OR ITS SUPPLIERS BE LIABLE FOR * ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, * TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION WITH THE * SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE. * * This file was originally licensed under the following license * * Licensed under the Apache License, Version 2.0 (the "License"); * you may not use this file except in compliance with the License. * You may obtain a copy of the License at * * http://www.apache.org/licenses/LICENSE-2.0 * * Unless required by applicable law or agreed to in writing, software * distributed under the License is distributed on an "AS IS" BASIS, * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. * See the License for the specific language governing permissions and * limitations under the License. */ // 7 // Total instruction count // 1 // Total kernel count // Module name: common.inc // // Common header file for all Video-Processing kernels // .default_execution_size (16) .default_register_type :ub .reg_count_total 128 .reg_count_payload 7 //========== Common constants ========== //========== Macros ========== //Fast Jump, For more details see "Set_Layer_N.asm" //========== Defines ==================== //========== Static Parameters (Common To All) ========== //r1 //r2 // e.g. byte0 byte1 byte2 // YUYV 0 1 3 // YVYU 0 3 1 //Color Pipe (IECP) parameters //ByteCopy //r4 // e.g. byte0 byte1 byte2 // YUYV 0 1 3 // YVYU 0 3 1 //========== Inline parameters (Common To All) =========== //============== Binding Index Table=========== //Common between DNDI and DNUV //================= Common Message Descriptor ===== // Message descriptor for thread spawning // Message Descriptors // = 000 0001 (min message len 1 ) 0,0000 (resp len 0 -add later) // 0000,0000,0000 // 0001(Spawn a root thread),0001 (Root thread spawn thread) // = 0x02000011 // Thread Spawner Message Descriptor // Message descriptor for atomic operation add // Message Descriptors // = 000 0110 (min message len 6 ) 0,0000 (resp len 0 -add later) // 1(header present)001,10(typed atomic operation)0(return enabled)0(slot group, low 8 bits),0111 (AOP_Add) // 0000,0000 (Binding table index, added later) // = 0x02000011 // Atomic Operation Add Message Descriptor // Message descriptor for dataport media write // Message Descriptors // = 000 0001 (min message len 1 - add later) 00000 (resp len 0) // 1 (header present 1) 0 1010 (media block write) 000000 // 00000000 (binding table index - set later) // = 0x020A8000 // Message Length defines // Response Length defines // Block Width and Height Size defines // Extended Message Descriptors // Common message descriptors: //===================== Math Function Control =================================== //============ Message Registers =============== // buf4 starts from r28 //#define mMSGHDR_EOT r43 // Dummy Message Register for EOT .declare mubMSGPAYLOAD Base=r30 ElementSize=1 SrcRegion=<16;16,1> Type=ub .declare muwMSGPAYLOAD Base=r30 ElementSize=2 SrcRegion=<16;16,1> Type=uw .declare mudMSGPAYLOAD Base=r30 ElementSize=4 SrcRegion=<8;8,1> Type=ud .declare mfMSGPAYLOAD Base=r30 ElementSize=4 SrcRegion=<8;8,1> Type=f //=================== End of thread instruction =========================== //=====================Pointers Used===================================== //======================================================================= //r11-r17 // Define temp space for any usages // Common Buffers // temp space for rotation .declare fROBUF Base=r11.0 ElementSize=4 SrcRegion=<8;8,1> DstRegion=<1> Type=f .declare udROBUF Base=r11.0 ElementSize=4 SrcRegion=<8;8,1> DstRegion=<1> Type=ud .declare uwROBUF Base=r11.0 ElementSize=2 SrcRegion=<16;16,1> DstRegion=<1> Type=uw .declare ubROBUF Base=r11.0 ElementSize=1 SrcRegion=<16;16,1> DstRegion=<1> Type=ub .declare ub4ROBUF Base=r11.0 ElementSize=1 SrcRegion=<32;8,4> DstRegion=<4> Type=ub // End of common.inc //Module Name: Set_AVS_Buf_0123_YUVA.asm // Module Name : Set_Buf_0123_VUYA // Description: Includes all definitions explicit to Fast Composite. // End of common.inc //========== GRF partition ========== // r0 header : r0 (1 GRF) // Static parameters : r1 - r6 (6 GRFS) // Inline parameters : r7 - r8 (2 GRFs) // MSGSRC : r27 (1 GRF) //=================================== //Interface: //========== Static Parameters (Explicit To Fast Composite) ========== //r1 //CSC Set 0 .declare udCSC_CURBE Base=r1.0 ElementSize=4 Type=ud //Constant alpha //r2 // Gen7 AVS WA // WiDi Definitions //Colorfill // 0: 0-degree, 1: 90, 2: 180, 3: 270-degree, clockwise. .declare ubCOLOR_PIXEL_VAL Base=r2.20 ElementSize=1 SrcRegion=<0;1,0> DstRegion=<1> Type=ub //r3 //Normalised Ratio of Horizontal step size with main video for all layers //Normalised Ratio of Horizontal step size with main video for all layers becomes //Normalised Horizontal step size for all layers in VP_Setup.asm //r4 //Normalised Vertical step size for all layers //r5 //Normalised Vertical Frame Origin for all layers //r6 //Normalised Horizontal Frame Origin for all layers //========== Inline Parameters (Explicit To Fast Composite) ========== //Main video Step X //====================== Binding table (Explicit To Fast Composite)========================================= //Used by Interlaced Scaling Kernels //========== Sampler State Table Index (Explicit To Fast Composite)========== //Sampler Index for AVS/IEF messages //Sampler Index for SIMD16 sampler messages //============================================================================= .declare fBUFFER_0 Base=r64.0 ElementSize=4 SrcRegion=<8;8,1> DstRegion=<1> Type=f .declare fBUFFER_1 Base=r80.0 ElementSize=4 SrcRegion=<8;8,1> DstRegion=<1> Type=f .declare fBUFFER_2 Base=r96.0 ElementSize=4 SrcRegion=<8;8,1> DstRegion=<1> Type=f .declare fBUFFER_3 Base=r112.0 ElementSize=4 SrcRegion=<8;8,1> DstRegion=<1> Type=f .declare fBUFFER_4 Base=r28.0 ElementSize=4 SrcRegion=<8;8,1> DstRegion=<1> Type=f .declare fBUFFER_5 Base=r46.0 ElementSize=4 SrcRegion=<8;8,1> DstRegion=<1> Type=f .declare udBUFFER_0 Base=r64.0 ElementSize=4 SrcRegion=<8;8,1> DstRegion=<1> Type=ud .declare udBUFFER_1 Base=r80.0 ElementSize=4 SrcRegion=<8;8,1> DstRegion=<1> Type=ud .declare udBUFFER_2 Base=r96.0 ElementSize=4 SrcRegion=<8;8,1> DstRegion=<1> Type=ud .declare udBUFFER_3 Base=r112.0 ElementSize=4 SrcRegion=<8;8,1> DstRegion=<1> Type=ud .declare udBUFFER_4 Base=r28.0 ElementSize=4 SrcRegion=<8;8,1> DstRegion=<1> Type=ud .declare udBUFFER_5 Base=r46.0 ElementSize=4 SrcRegion=<8;8,1> DstRegion=<1> Type=ud .declare uwBUFFER_0 Base=r64.0 ElementSize=2 SrcRegion=<16;16,1> DstRegion=<1> Type=uw .declare uwBUFFER_1 Base=r80.0 ElementSize=2 SrcRegion=<16;16,1> DstRegion=<1> Type=uw .declare uwBUFFER_2 Base=r96.0 ElementSize=2 SrcRegion=<16;16,1> DstRegion=<1> Type=uw .declare uwBUFFER_3 Base=r112.0 ElementSize=2 SrcRegion=<16;16,1> DstRegion=<1> Type=uw .declare uwBUFFER_4 Base=r28.0 ElementSize=2 SrcRegion=<16;16,1> DstRegion=<1> Type=uw .declare uwBUFFER_5 Base=r46.0 ElementSize=2 SrcRegion=<16;16,1> DstRegion=<1> Type=uw .declare ubBUFFER_0 Base=r64.0 ElementSize=1 SrcRegion=<16;16,1> DstRegion=<1> Type=ub .declare ubBUFFER_1 Base=r80.0 ElementSize=1 SrcRegion=<16;16,1> DstRegion=<1> Type=ub .declare ubBUFFER_2 Base=r96.0 ElementSize=1 SrcRegion=<16;16,1> DstRegion=<1> Type=ub .declare ubBUFFER_3 Base=r112.0 ElementSize=1 SrcRegion=<16;16,1> DstRegion=<1> Type=ub .declare ubBUFFER_4 Base=r28.0 ElementSize=1 SrcRegion=<16;16,1> DstRegion=<1> Type=ub .declare ubBUFFER_5 Base=r46.0 ElementSize=1 SrcRegion=<16;16,1> DstRegion=<1> Type=ub .declare ub4BUFFER_0 Base=r64.0 ElementSize=1 SrcRegion=<32;8,4> DstRegion=<4> Type=ub .declare ub4BUFFER_1 Base=r80.0 ElementSize=1 SrcRegion=<32;8,4> DstRegion=<4> Type=ub .declare ub4BUFFER_2 Base=r96.0 ElementSize=1 SrcRegion=<32;8,4> DstRegion=<4> Type=ub .declare ub4BUFFER_3 Base=r112.0 ElementSize=1 SrcRegion=<32;8,4> DstRegion=<4> Type=ub .declare ub4BUFFER_4 Base=r28.0 ElementSize=1 SrcRegion=<32;8,4> DstRegion=<4> Type=ub .declare ub4BUFFER_5 Base=r46.0 ElementSize=1 SrcRegion=<32;8,4> DstRegion=<4> Type=ub //Pointer to mask reg //r18 //Always keep Cannel Pointers and Offsets in same GRF, so that we can use // NODDCLR, NODDCHK flags. -rT .declare udCSC_COEFF_0 Base=r18.0 ElementSize=4 Type=ud // 1 GRF //r19 .declare udCSC_COEFF_1 Base=r19.0 ElementSize=4 Type=ud // 1 GRF //r20 .declare uwALPHA_MASK_REG_TEMP Base=r20.0 ElementSize=2 SrcRegion=<16;16,1> Type=uw // 1 GRF //r21 .declare uwALPHA_MASK_REG Base=r21.0 ElementSize=2 SrcRegion=<16;16,1> Type=uw // 1 GRF //r22 //Always keep Cannel Pointers and Offsets in same GRF, so that we can use // NODDCLR, NODDCHK flags. -rT //Keep fORIGIN_X_NLAS, fY_OFFSET_2ND_BLOCK, fSTEP_X_NLAS, pMSGDSC_COPY, ubCONST_ALPHA_COPY as //sub registers of same GRF to enable using NODDCLR NODDCHK. -rT //r23 //Lumakey //r24 //r25 //r26 //defines to generate LABELS during compile time. //For AVS: We use surface state as R8G8B8A8_UNORM and hence set pointers to VUYA. //AVS LAYOUT:(VVUUYYAA) //Assign buffer channel order for Buffer 0123 in the order AUYV a0.3>A, a0.2>U, a0.1>Y, a0.0>V //V = 0, Y= 8, U = 4, A = 12. mov (4) acc0.0<1>:w 0x6E2A:v add (4) acc0.0<1>:w acc0<4;4,1>:w 70:uw shl (4) r22.0<1>:w acc0<4;4,1>:w 5:uw //Used by Shuffle. //SU LAYOUT:(VUYAVUYA) //V = 0, Y = 4, U = 2, A = 6 mov (4) acc0.0<1>:w 0x6240:v add (4) acc0.0<1>:w acc0<4;4,1>:w 64:uw shl (4) r18.0<1>:w acc0<4;4,1>:w 5:uw { NoDDClr } //Convert to BYTE address. //OFFSET: mov (1) r18.4<1>:ud 0x1000100:ud { NoDDChk }