/* * All Video Processing kernels * Copyright © <2010>, Intel Corporation. * * Permission is hereby granted, free of charge, to any person obtaining a * copy of this software and associated documentation files (the * "Software"), to deal in the Software without restriction, including * without limitation the rights to use, copy, modify, merge, publish, * distribute, sub license, and/or sell copies of the Software, and to * permit persons to whom the Software is furnished to do so, subject to * the following conditions: * * The above copyright notice and this permission notice (including the * next paragraph) shall be included in all copies or substantial portions * of the Software. * * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS * OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT. * IN NO EVENT SHALL PRECISION INSIGHT AND/OR ITS SUPPLIERS BE LIABLE FOR * ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, * TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION WITH THE * SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE. * * This file was originally licensed under the following license * * Licensed under the Apache License, Version 2.0 (the "License"); * you may not use this file except in compliance with the License. * You may obtain a copy of the License at * * http://www.apache.org/licenses/LICENSE-2.0 * * Unless required by applicable law or agreed to in writing, software * distributed under the License is distributed on an "AS IS" BASIS, * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. * See the License for the specific language governing permissions and * limitations under the License. * */ // Module name: PL8x4_Save_NV12.asm // // Save entire current planar frame data block of size 16x8 //--------------------------------------------------------------- // Symbols needed to be defined before including this module // // DWORD_ALIGNED_DEST: only if DEST_Y, DEST_U, DEST_V data are DWord aligned // ORIX: //--------------------------------------------------------------- #include "PL8x4_Save_NV12.inc" mov (8) mMSGHDR<1>:ud rMSGSRC<8;8,1>:ud #if !defined(SAVE_UV_ONLY) // Save current planar frame Y block data (16x8) ------------------------------- mov (2) mMSGHDR.0<1>:d wORIX<2;2,1>:w // Block origin mov (1) mMSGHDR.2<1>:ud nDPW_BLOCK_SIZE_Y:ud // Block width and height (16x8) #endif //Use the mask to determine which pixels shouldn't be over-written and (1) acc0<1>:ud udBLOCK_MASK<0;1,0>:ud 0x00FFFFFF:ud cmp.ge.f0.0 (1) dNULLREG acc0<0;1,0>:ud 0x00FFFFFF:ud //Check if all pixels in the block need to be modified (f0.0) jmpi WritePlanarToDataPort //If mask is not all 1's, then load the entire 16x8 block //so that only those bytes may be modified that need to be (using the mask) send (8) udSRC_Y(0)<1> mMSGHDR udDUMMY_NULL nDATAPORT_READ nDPMR_MSGDSC+nDPR_MSG_SIZE_Y+nBI_DESTINATION_Y:ud //16x8 asr (1) rMSGSRC.1<1>:ud wORIY<0;1,0>:w 1:w { NoDDClr } // U/V block origin should be half of Y's mov (1) rMSGSRC.2<1>:ud nDPW_BLOCK_SIZE_UV:ud { NoDDChk } // Block width and height (16x4) mov (8) mMSGHDR<1>:ud rMSGSRC<8;8,1>:ud //move message desrcptor to the message header send (8) udSRC_U(0)<1> mMSGHDR udDUMMY_NULL nDATAPORT_READ nDPMR_MSGDSC+nDPR_MSG_SIZE_UV+nBI_DESTINATION_UV:ud //Restore the origin information mov (2) rMSGSRC.0<1>:ud wORIX<2;2,1>:w // Block origin mov (1) rMSGSRC.2<1>:ud nDPW_BLOCK_SIZE_Y:ud // Block width and height (16x8) mov (8) mMSGHDR<1>:ud rMSGSRC<8;8,1>:ud //move message desrcptor to the message header //Merge the data mov (1) f0.1:uw ubBLOCK_MASK_V:ub //Load the mask on flag reg (f0.1) mov (8) rMASK_TEMP<1>:uw uwBLOCK_MASK_H:uw (-f0.1) mov (8) rMASK_TEMP<1>:uw 0:uw //convert the mask from 16bits to 8bits by selecting every other bit mov (1) udMASK_TEMP1(0,0)<1> 0x00040001:ud mov (1) udMASK_TEMP1(0,1)<1> 0x00400010:ud mov (1) udMASK_TEMP1(0,2)<1> 0x04000100:ud mov (1) udMASK_TEMP1(0,3)<1> 0x40001000:ud //merge the loaded block with the current block $for(0,0; (-f0.1) mov (16) ubDEST_Y(0,%1*32)<2> ubSRC_Y(0,%1*16) and.nz.f0.1 (8) wNULLREG uwMASK_TEMP(0,%1)<0;1,0> uwMASK_TEMP1(0,0) //change the mask by selecting every other bit (-f0.1) mov (8) ubDEST_U(0, %2*16)<2> ub2SRC_U(0, %1*8)<16;8,2> (-f0.1) mov (8) ubDEST_V(0, %2*16)<2> ub2SRC_U(0, %1*8+1)<16;8,2> mov (1) f0.1:uw uwMASK_TEMP(0,1+%1)<0;1,0> (-f0.1) mov (16) ubDEST_Y(0, (1+%1)*32)<2> ubSRC_Y(0, (1+%1)*16) } WritePlanarToDataPort: #if !defined(SAVE_UV_ONLY) $for(0,0; ub2DEST_Y(%1)REGION(16,2) mov (16) mubMSGPAYLOAD(%2,16)<1> ub2DEST_Y(%1+1)REGION(16,2) } send (8) dNULLREG mMSGHDR udDUMMY_NULL nDATAPORT_WRITE nDPMW_MSGDSC+nDPW_MSG_SIZE_Y+nBI_DESTINATION_Y:ud #endif //** Save 8x4 packed U and V ----------------------------------------------------- // we could write directly wORIX to mMSGHDR and then execute asr on it, that way we could // avoid using rMSGSRC as a buffer and have one command less in code, but it is unknown whether //it is possible to do asr on mMSGHDR so we use rMSGSRC. mov (2) rMSGSRC.0<1>:d wORIX<2;2,1>:w // Block origin asr (1) rMSGSRC.1<1>:d rMSGSRC.1<0;1,0>:d 1:w // U/V block origin should be half of Y's mov (1) rMSGSRC.2<1>:ud nDPW_BLOCK_SIZE_UV:ud // U/V block width and height (16x4) mov (8) mMSGHDR<1>:ud rMSGSRC<8;8,1>:ud $for(0,0; ub2DEST_U(%2)REGION(16,2) mov (16) mubMSGPAYLOAD(%2,1)<2> ub2DEST_V(%2)REGION(16,2) } send (8) dNULLREG mMSGHDR udDUMMY_NULL nDATAPORT_WRITE nDPMW_MSGDSC+nDPW_MSG_SIZE_UV+nBI_DESTINATION_UV:ud // End of PL8x4_Save_NV12