/* * All Video Processing kernels * Copyright © <2010>, Intel Corporation. * * Permission is hereby granted, free of charge, to any person obtaining a * copy of this software and associated documentation files (the * "Software"), to deal in the Software without restriction, including * without limitation the rights to use, copy, modify, merge, publish, * distribute, sub license, and/or sell copies of the Software, and to * permit persons to whom the Software is furnished to do so, subject to * the following conditions: * * The above copyright notice and this permission notice (including the * next paragraph) shall be included in all copies or substantial portions * of the Software. * * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS * OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT. * IN NO EVENT SHALL PRECISION INSIGHT AND/OR ITS SUPPLIERS BE LIABLE FOR * ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, * TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION WITH THE * SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE. * * This file was originally licensed under the following license * * Licensed under the Apache License, Version 2.0 (the "License"); * you may not use this file except in compliance with the License. * You may obtain a copy of the License at * * http://www.apache.org/licenses/LICENSE-2.0 * * Unless required by applicable law or agreed to in writing, software * distributed under the License is distributed on an "AS IS" BASIS, * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. * See the License for the specific language governing permissions and * limitations under the License. * */ #include "PL4x8_Save_NV11.inc" mov (8) mMSGHDR<1>:ud rMSGSRC<8;8,1>:ud #if !defined(SAVE_UV_ONLY) // Save current planar frame Y block data (16x8) ------------------------------- mov (2) mMSGHDR.0<1>:d wORIX<2;2,1>:w // Block origin mov (1) mMSGHDR.2<1>:ud nDPW_BLOCK_SIZE_Y:ud // Block width and height (16x8) ///* Yoni - masking is not relevant for ILK?!? // // //Use the mask to determine which pixels shouldn't be over-written // cmp.ge.f0.0 (1) NULLREG BLOCK_MASK_D:ud 0x00FFFFFF:ud //Check if all pixels in the block need to be modified // (f0.0) jmpi WritePlanarToDataPort // // //If mask is not all 1's, then load the entire 16x8 block // //so that only those bytes may be modified that need to be (using the mask) // send (8) SRC_YD(0)<1> MSGHDR MSGSRC<8;8,1>:ud DWBRMSGDSC+0x00040000+BI_DEST_Y:ud //16x8 // // asr (2) MSGSRC.0<1>:ud ORIX<2;2,1>:w 1:w // U/V block origin should be half of Y's // mov (1) MSGSRC.2<1>:ud 0x00030007:ud // Block width and height (8x4) // send (8) SRC_UD(0)<1> MSGHDR MSGSRC<8;8,1>:ud DWBRMSGDSC+0x00010000+BI_DEST_U:ud // send (8) SRC_VD(0)<1> MSGHDR MSGSRC<8;8,1>:ud DWBRMSGDSC+0x00010000+BI_DEST_V:ud // // //Restore the origin information // mov (2) MSGSRC.0<1>:ud ORIX<2;2,1>:w // Block origin // mov (1) MSGSRC.2<1>:ud 0x0007000F:ud // Block width and height (16x8) // // //expand U and V to be aligned on word boundary // mov (16) SRC_UW(1)<1> SRC_U(0,16) // mov (16) SRC_UW(0)<1> SRC_U(0, 0) // mov (16) SRC_VW(1)<1> SRC_V(0,16) // mov (16) SRC_VW(0)<1> SRC_V(0, 0) // // //Merge the data // mov (1) f0.1:uw BLOCK_MASK_V:uw //Load the mask on flag reg // (f0.1) mov (8) TEMP0<1>:uw BLOCK_MASK_H:uw // (-f0.1) mov (8) TEMP0<1>:uw 0:uw // // // Destination is Word aligned // $for(0; // (-f0.1) mov (16) DEST_Y(0, %1*32)<2> SRC_Y(0, %1*16) // (-f0.1) mov (16) DEST_U(0, %1*8)<1> SRC_U(0, %1*8) //only works for Word aligned Byte data // (-f0.1) mov (16) DEST_V(0, %1*8)<1> SRC_V(0, %1*8) //only works for Word aligned Byte data // // mov (1) f0.1:uw TEMP(0,1+%1)<0;1,0> // (-f0.1) mov (16) DEST_Y(0, 1+%1*32)<2> SRC_Y(0, 1+%1*16) // // } // //*/ Yoni - masking is not relevant for ILK?!? WritePlanarToDataPort: $for(0,0; ub2DEST_Y(%1)REGION(16,2) mov (16) mubMSGPAYLOAD(%2,16)<1> ub2DEST_Y(%1+1)REGION(16,2) } send (8) dNULLREG mMSGHDR udDUMMY_NULL nDATAPORT_WRITE nDPMW_MSGDSC+nDPW_MSG_SIZE_Y+nBI_DESTINATION_Y:ud #endif // Save U/V data block in planar format (4x8) ---------------------------------- mov (2) rMSGSRC.0<1>:d wORIX<2;2,1>:w // Block origin asr (1) rMSGSRC.0<1>:d rMSGSRC.0<0;1,0>:d 1:w // U/V block origin should be half of Y's mov (8) mMSGHDR<1>:ud rMSGSRC<8;8,1>:ud $for(0,0; ub2DEST_U(%2)REGION(16,2) mov (16) mubMSGPAYLOAD(%2,1)<2> ub2DEST_V(%2)REGION(16,2) } send (8) dNULLREG mMSGHDR udDUMMY_NULL nDATAPORT_WRITE nDPMW_MSGDSC+nDPW_MSG_SIZE_UV+nBI_DESTINATION_UV:ud // End of PL4x8_Save_NV11