/* * Intra predict 16x16 luma block * Copyright © <2010>, Intel Corporation. * * Permission is hereby granted, free of charge, to any person obtaining a * copy of this software and associated documentation files (the * "Software"), to deal in the Software without restriction, including * without limitation the rights to use, copy, modify, merge, publish, * distribute, sub license, and/or sell copies of the Software, and to * permit persons to whom the Software is furnished to do so, subject to * the following conditions: * * The above copyright notice and this permission notice (including the * next paragraph) shall be included in all copies or substantial portions * of the Software. * * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS * OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT. * IN NO EVENT SHALL PRECISION INSIGHT AND/OR ITS SUPPLIERS BE LIABLE FOR * ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, * TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION WITH THE * SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE. * * This file was originally licensed under the following license * * Licensed under the Apache License, Version 2.0 (the "License"); * you may not use this file except in compliance with the License. * You may obtain a copy of the License at * * http://www.apache.org/licenses/LICENSE-2.0 * * Unless required by applicable law or agreed to in writing, software * distributed under the License is distributed on an "AS IS" BASIS, * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. * See the License for the specific language governing permissions and * limitations under the License. * */ // Module name: intra_Pred_16x16_Y.asm // // Intra predict 16x16 luma block // and (1) PINTRAPRED_Y<1>:w INTRA_PRED_MODE(0)REGION(1,0) 0x0F:w // WA for "jmpi" restriction mov (1) REG_INTRA_TEMP_1<1>:ud r[PINTRAPRED_Y, INTRA_16X16_OFFSET]:ub jmpi (1) REG_INTRA_TEMP_1<0;1,0>:d // Mode 0 INTRA_16x16_VERTICAL: $for(0; <16; 2) { mov (32) PRED_YW(%1)<1> INTRA_REF_TOP(0) {Compr} } jmpi (1) End_intra_Pred_16x16_Y // Mode 1 INTRA_16x16_HORIZONTAL: mov (1) PREF_LEFT_UD<1>:ud INTRA_REF_LEFT_ID*GRFWIB*0x00010001+0x00040000:ud // Set address registers for instruction compression $for(0,0; <16; 2,8) { mov (32) PRED_YW(%1)<1> r[PREF_LEFT,%2+3]<0;1,0>:ub {Compr} // Actual left column reference data start at offset 3 } jmpi (1) End_intra_Pred_16x16_Y // Mode 2 INTRA_16x16_DC: and.nz.f0.0 (8) NULLREG REG_INTRA_PRED_AVAIL_FLAG INTRA_PRED_UP_AVAIL_FLAG:ud // Top macroblock available for intra prediction? and (8) acc0<1>:ud REG_INTRA_PRED_AVAIL_FLAG INTRA_PRED_LEFT_TH_AVAIL_FLAG+INTRA_PRED_LEFT_BH_AVAIL_FLAG:ud // Left macroblock available for intra prediction? xor.z.f0.1 (8) NULLREG acc0:ud INTRA_PRED_LEFT_TH_AVAIL_FLAG+INTRA_PRED_LEFT_BH_AVAIL_FLAG:ud // Left macroblock available for intra prediction? // Rearrange reference samples for unified DC prediction code // (-f0.0.any8h) mov (8) INTRA_REF_TOP_W(0)<1> 0x8080:uw (-f0.1.any8h) mov (8) INTRA_REF_LEFT(0)<4> INTRA_REF_TOP(0)REGION(8,1) (-f0.1.any8h) mov (8) INTRA_REF_LEFT(1)<4> INTRA_REF_TOP(0,8)REGION(8,1) (-f0.0.any8h) mov (8) INTRA_REF_TOP(0)<1> INTRA_REF_LEFT(0)REGION(8,4) (-f0.0.any8h) mov (8) INTRA_REF_TOP(0,8)<1> INTRA_REF_LEFT(1)REGION(8,4) // Split due to HW limitation // Perform DC prediction // add (16) PRED_YW(15)<1> INTRA_REF_LEFT(0)REGION(8,4) INTRA_REF_TOP(0)REGION(16,1) add (8) PRED_YW(15)<1> PRED_YW(15)REGION(8,1) PRED_YW(15,8)REGION(8,1) add (4) PRED_YW(15)<1> PRED_YW(15)REGION(4,1) PRED_YW(15,4)REGION(4,1) add (2) PRED_YW(15)<1> PRED_YW(15)REGION(2,1) PRED_YW(15,2)REGION(2,1) add (32) acc0<1>:w PRED_YW(15)REGION(1,0) PRED_YW(15,1)REGION(1,0) {Compr} // Set up both acc0 and acc1 add (32) acc0<1>:w acc0:w 16:w {Compr} $for(0; <16; 2) { shr (32) PRED_YW(%1)<1> acc0:w 5:w {Compr} } jmpi (1) End_intra_Pred_16x16_Y // Mode 3 INTRA_16x16_PLANE: // Refer to H.264/AVC spec Section 8.3.3.4 #define A REG_INTRA_TEMP_2.0 // All are WORD type #define B REG_INTRA_TEMP_3.0 #define C REG_INTRA_TEMP_3.1 #define YP REG_INTRA_TEMP_0 // Store intermediate results of c*(y-7). Make sure it's an even GRF #define YP1 REG_INTRA_TEMP_1 // Store intermediate results of c*(y-7). Make sure it's an odd GRF, used in {Comp} #define XP REG_INTRA_TEMP_5 // Store intermediate results of a+b*(x-7)+16. Make sure it's an odd GRF // First Calculate constants H and V // H1 = sum((-x'-1)*p[8+x',-1]), x'=0,1,...7 // H2 = sum((-x'-1)*p[6-x',-1]), x'=7,6,...0 // H = -H1 + H2 // The same calculation holds for V // mul (8) H1(0)<1> INTRA_REF_TOP(0,8)REGION(8,1) 0x89ABCDEF:v mul (8) H2(0)<1> INTRA_REF_TOP(0,-1)REGION(8,1) 0xFEDCBA98:v mul (8) V1(0)<1> INTRA_REF_LEFT(0,8*4)REGION(8,4) 0x89ABCDEF:v mul (8) V2(0)<1> INTRA_REF_LEFT(0)REGION(8,4) 0x0FEDCBA9:v mul (1) V2(0,7)<1> INTRA_REF_TOP(0,-1)<0;1,0> -8:w // Replace 0*p[-1,7] with -8*p[-1,-1] // Now, REG_INTRA_TEMP_0 holds [H2, -H1] and REG_INTRA_TEMP_1 holds [V2, -V1] // Sum up [H2, -H1] and [V2, -V1] using instruction compression // ExecSize = 16 is restricted by B-spec for instruction compression // Actual intermediate results are in lower sub-registers after each summing step add (16) H1(0)<1> -H1(0) H2(0) {Compr} // Results in lower 8 WORDs add (16) H1(0)<1> H1(0) H1(0,4) {Compr} // Results in lower 4 WORDs add (16) H1(0)<1> H1(0) H1(0,2) {Compr} // Results in lower 2 WORDs add (16) H1(0)<1> H1(0) H1(0,1) {Compr} // Results in lower 1 WORD // Calculate a, b, c and further derivations mov (16) acc0<1>:w 32:w mac (2) acc0<1>:w H1(0)<16;1,0> 5:w shr (2) B<1>:w acc0:w 6:w // Done b,c mov (16) acc0<1>:w 16:w mac (16) acc0<1>:w INTRA_REF_TOP(0,15)<0;1,0> 16:w mac (16) A<1>:w INTRA_REF_LEFT(0,15*4)<0;1,0> 16:w // A = a+16 mac (16) XP<1>:w B<0;1,0>:w XY_7<16;16,1>:b // XP = A+b*(x-7) mul (8) YP<1>:w C<0;1,0>:w XY_7<16;8,2>:b // YP = c*(y-7), even portion mul (8) YP1<1>:w C<0;1,0>:w XY_7_1<16;8,2>:b // YP = c*(y-7), odd portion // Finally the intra_16x16 plane prediction $for(0,0; <16; 2,1) { add (32) acc0<1>:w XP<16;16,1>:w YP.%2<16;16,0>:w {Compr} // Set Width!= 1 to trick EU to use YP_1.%2 for 2nd instruction shr.sat (32) PRED_Y(%1)<2> acc0<16;16,1>:w 5:w {Compr} } End_intra_Pred_16x16_Y: // End of intra_Pred_16x16_Y