/* * Header file for all AVC intra prediction kernels * Copyright © <2010>, Intel Corporation. * * Permission is hereby granted, free of charge, to any person obtaining a * copy of this software and associated documentation files (the * "Software"), to deal in the Software without restriction, including * without limitation the rights to use, copy, modify, merge, publish, * distribute, sub license, and/or sell copies of the Software, and to * permit persons to whom the Software is furnished to do so, subject to * the following conditions: * * The above copyright notice and this permission notice (including the * next paragraph) shall be included in all copies or substantial portions * of the Software. * * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS * OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT. * IN NO EVENT SHALL PRECISION INSIGHT AND/OR ITS SUPPLIERS BE LIABLE FOR * ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, * TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION WITH THE * SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE. * * This file was originally licensed under the following license * * Licensed under the Apache License, Version 2.0 (the "License"); * you may not use this file except in compliance with the License. * You may obtain a copy of the License at * * http://www.apache.org/licenses/LICENSE-2.0 * * Unless required by applicable law or agreed to in writing, software * distributed under the License is distributed on an "AS IS" BASIS, * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. * See the License for the specific language governing permissions and * limitations under the License. * */ #if !defined(__INTRA_HEADER__) // Make sure this file is only included once #define __INTRA_HEADER__ // Module name: intra_header.inc // // Header file for all AVC intra prediction kernels // // This header file defines everything that's specific to intra macroblock kernels // ----------- Various data buffers and pointers ------------ // // I_PCM data buffer // #define I_PCM_BUF_Y 4 #define I_PCM_BUF_UV 12 #define REG_I_PCM_BUF_Y r4 #define REG_I_PCM_BUF_UV r12 .declare I_PCM_Y Base=REG_I_PCM_BUF_Y ElementSize=1 SrcRegion=REGION(16,1) Type=ub // 8-bit I_PCM Y data .declare I_PCM_UV Base=REG_I_PCM_BUF_UV ElementSize=1 SrcRegion=REGION(16,1) Type=ub // 8-bit I_PCM U/V data // Intra macroblock error data blocks // #define ERRBUF 4 // Starting GRF index for error data #define REG_ERRBUF r4 .declare MBBLOCKW Base=REG_ERRBUF ElementSize=2 SrcRegion=REGION(16,1) Type=w // For 16-bit inter MB .declare MBBLOCKD Base=REG_ERRBUF ElementSize=2 SrcRegion=REGION(16,1) Type=uw // For use in "send" command #define PERROR a0.2 // Pointer to macroblock error data #define PERROR1 a0.3 // Pointer to macroblock error data used by instruction compression #define PERROR_UD a0.1 // Pointer to macroblock error data in DWORD unit // Intra macroblock reference data // #define REG_INTRA_REF_TOP r49 // Must be an odd numbered GRF register .declare INTRA_REF_TOP0 Base=REG_INTRA_REF_TOP ElementSize=1 SrcRegion=REGION(16,1) Type=ub .declare INTRA_REF_TOP Base=REG_INTRA_REF_TOP.4 ElementSize=1 SrcRegion=REGION(16,1) Type=ub // Actual top row reference data start at offset 4 in BYTE .declare INTRA_REF_TOP_W Base=REG_INTRA_REF_TOP.2 ElementSize=2 SrcRegion=REGION(16,1) Type=uw // Actual top row reference data start at offset 2 in WORD .declare INTRA_REF_TOP_D Base=REG_INTRA_REF_TOP ElementSize=4 DstRegion=<1> Type=ud // Only used in "send" instruction #define INTRA_REF_LEFT_ID 50 #define REG_INTRA_REF_LEFT r50 .declare INTRA_REF_LEFT0 Base=REG_INTRA_REF_LEFT ElementSize=1 SrcRegion=REGION(8,4) Type=ub .declare INTRA_REF_LEFT Base=REG_INTRA_REF_LEFT.3 ElementSize=1 SrcRegion=REGION(8,4) Type=ub // Actual left column reference data are located at offset 3 in BYTE .declare INTRA_REF_LEFT_UV Base=REG_INTRA_REF_LEFT.2 ElementSize=1 SrcRegion=REGION(8,4) Type=ub // Actual left column U/V reference data are located at offset 2 in BYTE .declare INTRA_REF_LEFT_W Base=REG_INTRA_REF_LEFT.1 ElementSize=2 SrcRegion=REGION(8,2) Type=uw // Actual left column reference data are located at offset 1 in WORD .declare INTRA_REF_LEFT_D Base=REG_INTRA_REF_LEFT ElementSize=4 DstRegion=<1> Type=ud // Only used in "send" instruction #define PREF_LEFT a0.4 // Pointer to left reference data #define PREF_LEFT_UD a0.2 // Pointer in DWORD to left reference data #define INTRA_TEMP_0 52 #define INTRA_TEMP_1 53 #define INTRA_TEMP_2 54 #define INTRA_TEMP_3 55 #define INTRA_TEMP_4 56 #define INTRA_TEMP_5 57 #define INTRA_TEMP_6 58 #define REG_INTRA_TEMP_0 r52 #define REG_INTRA_TEMP_1 r53 #define REG_INTRA_TEMP_2 r54 #define REG_INTRA_TEMP_3 r55 #define REG_INTRA_TEMP_4 r56 #define REG_INTRA_TEMP_5 r57 #define REG_INTRA_TEMP_6 r58 #define REG_INTRA_TEMP_7 r59 #define REG_INTRA_TEMP_8 r60 // Destination registers for write commit #define REG_WRITE_COMMIT_Y r60.0 #define REG_WRITE_COMMIT_UV r61.0 // ----------- Various data buffers and pointers ------------ // R32 - R47 for predicted picture buffer (for both Y and U/V blocks) // #define PREDBUF 32 // Starting GRF index for predicted buffer #define REG_PREDBUF r32 .declare PRED_Y Base=REG_PREDBUF ElementSize=1 SrcRegion=REGION(16,1) Type=ub // Predicted Y picture .declare PRED_YW Base=REG_PREDBUF ElementSize=2 SrcRegion=REGION(16,1) Type=uw // Predicted Y picture stored in WORD .declare PRED_Y_FM Base=REG_PREDBUF ElementSize=1 SrcRegion=REGION(16,1) Type=ub // Predicted Y picture frame .declare PRED_Y_TF Base=REG_PREDBUF ElementSize=1 SrcRegion=REGION(16,1) Type=ub // Predicted Y picture Top field .declare PRED_UV Base=REG_PREDBUF ElementSize=1 SrcRegion=REGION(16,1) Type=ub // Predicted U/V picture .declare PRED_UVW Base=REG_PREDBUF ElementSize=2 SrcRegion=REGION(16,1) Type=uw // Predicted U/V picture stored in WORD .declare PRED_UV_FM Base=REG_PREDBUF ElementSize=1 SrcRegion=REGION(16,1) Type=ub // Predicted U/V picture frame .declare PRED_UV_TF Base=REG_PREDBUF ElementSize=1 SrcRegion=REGION(16,1) Type=ub // Predicted U/V picture top field .declare PRED_UV_BF Base=REG_PREDBUF.16 ElementSize=1 SrcRegion=REGION(16,1) Type=ub // Predicted U/V picture bottom field // The same region will also be used as finally decoded Y blocks shared with U/V blocks // #define DECBUF 32 #define REG_DECBUF r32 .declare DEC_Y Base=REG_DECBUF ElementSize=1 SrcRegion=REGION(16,1) Type=ub // Decoded Y picture .declare DEC_UV Base=REG_DECBUF ElementSize=1 SrcRegion=REGION(16,1) Type=ub // Decoded U/V P-/B-picture .declare DEC_UD Base=REG_DECBUF ElementSize=4 SrcRegion=REGION(8,1) Type=ud // Decoded buffer in UD type // Reference buffer for intra_NxN prediction // #define PRED_MODE REG_INTRA_TEMP_0 .declare REF_TOP0 Base=REG_INTRA_TEMP_5 ElementSize=1 SrcRegion=REGION(16,1) Type=ub .declare REF_TOP Base=REG_INTRA_TEMP_5.4 ElementSize=1 SrcRegion=REGION(16,1) Type=ub // Actual top reference data start from offset 3,i.e. p[-1,-1] .declare REF_TOP_W Base=REG_INTRA_TEMP_5 ElementSize=2 SrcRegion=REGION(16,1) Type=uw .declare REF_TOP_D Base=REG_INTRA_TEMP_5 ElementSize=4 SrcRegion=REGION(8,1) Type=ud .declare REF_LEFT Base=REG_INTRA_TEMP_6 ElementSize=1 SrcRegion=REGION(16,1) Type=ub .declare REF_LEFT_D Base=REG_INTRA_TEMP_6 ElementSize=4 SrcRegion=REGION(8,1) Type=ud // For intra prediction plane mode // .declare H1 Base=REG_INTRA_TEMP_0 ElementSize=2 SrcRegion=REGION(8,1) Type=w // Make sure it's an even GRF .declare H2 Base=REG_INTRA_TEMP_0.8 ElementSize=2 SrcRegion=REGION(8,1) Type=w .declare V1 Base=REG_INTRA_TEMP_1 ElementSize=2 SrcRegion=REGION(8,1) Type=w // Make sure it's the following odd GRF .declare V2 Base=REG_INTRA_TEMP_1.8 ElementSize=2 SrcRegion=REGION(8,1) Type=w .declare CP Base=REG_INTRA_TEMP_2 ElementSize=2 SrcRegion=REGION(16,1) Type=w #define PINTRAPRED_Y a0.7 // Used as luma intra prediction mode pointer #define PINTRAPRED_UV a0.7 // Used as chroma intra prediction mode pointer #define PINTRA4X4_Y a0.4 // Used as luma intra_4x4 prediction mode pointer #define PBWDCOPY_4 a0.4 // a0.4 - a0.7 used in intra_4x4 prediction for moving data backward #define PBWDCOPY_8 a0.6 // a0.6 - a0.7 used in intra_8x8 prediction for moving data backward // For Intra_4x4 prediction mode // .declare INTRA_4X4_MODE Base=REG_INTRA_TEMP_1 ElementSize=4 SrcRegion=REGION(1,0) DstRegion=<1> Type=d // Actually only need 1 DWORD // ----------- Intra CURBE constants ------------ // #define REG_CURBE1 r1 #define REG_CURBE2 r2 #define INTRA_4X4_OFFSET 1*GRFWIB // 9 Bytes #define INTRA_8X8_OFFSET 1*GRFWIB+12 // 9 Bytes starting sub-register r1.3:ud #define INTRA_16X16_OFFSET 1*GRFWIB+24 // 4 Bytes starting sub-register r1.6:ud #define INTRA_CHROMA_OFFSET 1*GRFWIB+28 // 4 Bytes starting sub-register r1.7:ud #define TOP_REF_OFFSET REG_CURBE1.10 // r1.5:w // Constants used in plane intra prediction mode #define XY_3 REG_CURBE2.4 // Stored BYTE constants x-3 for x=0...7, i.e. -3,-2,...3,4 for U/V, need duplicate to every other byte #define XY_3_1 REG_CURBE2.5 // Stored BYTE constants x-3 for x=0...7, i.e. -3,-2,...3,4 for 2nd instruction in {Comp} #define XY_7 REG_CURBE2.0 // Stored BYTE constants x-7 for x=0...15, i.e. -7,-6,...7,8 for Y #define XY_7_1 REG_CURBE2.1 // Stored BYTE constants x-7 for x=0...15, i.e. -7,-6,...7,8 for 2nd instruction in {Comp} #define INV_SHIFT REG_CURBE2.16 #define INV_TRANS4 REG_CURBE2.20 // For reverse data transfer for intra_4x4 (0x00020406) #define INV_TRANS48 REG_CURBE2.22 // For reverse data transfer for intra_4x4 (0x0002) #define INV_TRANS8 REG_CURBE1.22 // For reverse data transfer for intra_8x8 (0x0001) #define INTRA_MODE REG_CURBE2.24 // Offset to intra_Pred_4x4_Y from each sub-block // ----------- In-line parameters ------------ // #define REG_INLINE r3 #define INLINE_DW0 REG_INLINE.0<0;1,0>:ud #define INLINE_DW1 REG_INLINE.1<0;1,0>:ud #define INLINE_DW2 REG_INLINE.2<0;1,0>:ud #define INLINE_DW3 REG_INLINE.3<0;1,0>:ud #define INLINE_DW4 REG_INLINE.4<0;1,0>:ud #define INLINE_DW5 REG_INLINE.5<0;1,0>:ud #define INLINE_DW6 REG_INLINE.6<0;1,0>:ud #define INLINE_DW7 REG_INLINE.7<0;1,0>:ud // Intra macroblock in-line data // // In-line DWORD 0 #define REG_MBAFF_FIELD REG_INLINE.1 // :uw, can be added directly to lower-word of MSGDSC #define MBAFF_FIELD BIT26+BIT25 // Bits 26:25 - MBAFF field macroblock flag // 00 = Current macroblock is not an MBAFF field macroblock // 11 = Current macroblock is an MBAFF field macroblock #define REG_FIELD_PARITY INLINE_DW0 #define FIELD_PARITY BIT24 // Bit 24 - Macroblock field parity flag // 0 = Current field is a top field // 1 = Current field is a bottom field #define REG_FIELD_MACROBLOCK_FLAG INLINE_DW0 #define FIELD_MACROBLOCK_FLAG BIT14 // Bit 14 - Field macroblock flag // 0 = Current macroblock is not a field macroblock // 1 = Current macroblock is a field macroblock #define REG_MACROBLOCK_TYPE INLINE_DW0 #define MACROBLOCK_TYPE BIT12+BIT11+BIT10+BIT9+BIT8 // Bit 12:8 - Intra macroblock flag #define REG_CHROMA_FORMAT_IDC INLINE_DW0 #define CHROMA_FORMAT_IDC BIT3+BIT2 // Bit 3:2 - Chroma format // 00 = Luma only (Monochrome) // 01 = YUV420 // 10 = YUV422 // 11 = YUV444 #define REG_MBAFF_PIC INLINE_DW0 #define MBAFF_PIC BIT1 // Bit 1 - MBAFF Frame picture // 0 = Not an MBAFF frame picture // 1 = An MBAFF frame picture #define REG_INTRA_PRED_8X8_BLK2_AVAIL_FLAG INLINE_DW0 #define INTRA_PRED_8X8_BLK2_AVAIL_FLAG BIT4 // Bit 4: Pixel available for block 2 in an intra_8x8 MB. // In-line DWORD 1 #define ORIX REG_INLINE.4 // :ub, H. origin of the macroblock in macroblock unit #define ORIY REG_INLINE.5 // :ub, V. origin of the macroblock in macroblock unit // In-line DWORD 2 #define REG_CBPCYB REG_INLINE.9 // :ub, Coded block pattern #define REG_CBPCY INLINE_DW2 // Bits 13:8 - Coded block pattern // reflect Y0, Y1, Y2, Y3, Cb4, Cr5 // Bit 13 - Y0 // Bit 12 - Y1 // Bit 11 - Y2 // Bit 10 - Y3 // Bit 9 - U4 // Bit 8 - V5 #define CBP_MASK 0x3F00:ud // Bit mask for all CBP bits #define CBP_Y_MASK 0x3C00:ud // Bit mask for CBP Y bits #define CBP_UV_MASK 0x0300:ud // Bit mask for CBP U/V bits #define CBP_Y0_MASK BIT13:ud // Bit mask for CBP Y0 bit #define CBP_Y1_MASK BIT12:ud // Bit mask for CBP Y1 bit #define CBP_Y2_MASK BIT11:ud // Bit mask for CBP Y2 bit #define CBP_Y3_MASK BIT10:ud // Bit mask for CBP Y3 bit #define CBP_U_MASK BIT9:ud // Bit mask for CBP U bit #define CBP_V_MASK BIT8:ud // Bit mask for CBP V bit // In-line DWORD 3 #define REG_INTRA_CHROMA_PRED_MODE REG_INLINE.12 // :ub - Intra chroma prediction mode #define INTRA_CHROMA_PRED_MODE BIT7+BIT6 // Bit 7:6 - Intra chroma prediction mode // 00 = Intra DC prediction // 01 = Intra horizontal prediction // 10 = Intra vertical prediction // 11 = Intra plane prediction #define INTRA_CHROMA_PRED_MODE_SHIFT 6 // Intra chroma prediction mode shift #define REG_INTRA_PRED_AVAIL_FLAG INLINE_DW3 #define INTRA_PRED_AVAIL_FLAG BIT4+BIT3+BIT2+BIT1+BIT0 // Bits 4:0 - Intra prediction available flag // Bit 0: Macroblock A (the left neighbor) entire or top half // Bit 1: Macroblock B (the upper neighbor) // Bit 2: Macroblock C (the above-right neighbor) // Bit 3: Macroblock D (the above-left neighbor) // Bit 4: Macroblock A (the left neighbor) bottom half // Each bit is defined below // 0 = The macroblock is not available for intra prediction // 1 = The macroblock is available for intra prediction #define INTRA_PRED_LEFT_TH_AVAIL_FLAG BIT0 // Bit 0: Macroblock A (the left neighbor) entire or top half #define INTRA_PRED_UP_AVAIL_FLAG BIT1 // Bit 1: Macroblock B (the upper neighbor) #define INTRA_PRED_UP_RIGHT_AVAIL_FLAG BIT2 // Bit 2: Macroblock C (the above-right neighbor) #define INTRA_PRED_UP_LEFT_AVAIL_FLAG BIT3 // Bit 3: Macroblock D (the above-left neighbor) #define INTRA_PRED_LEFT_BH_AVAIL_FLAG BIT4 // Bit 4: Macroblock A (the left neighbor) bottom half //#define INTRA_PRED_8X8_BLK2_AVAIL_FLAG BIT5 // Bit 5: Pixel available for block 2 in an intra_8x8 MB. #define REG_INTRA_PRED_AVAIL_FLAG_BYTE REG_INLINE.12 // Byte location of Intra_Pred_Avail_Flag #define REG_INTRA_PRED_AVAIL_FLAG_WORD REG_INLINE.6 // Word location of Intra_Pred_Avail_Flag .declare INTRA_PRED_MODE Base=REG_INLINE.16 ElementSize=1 SrcRegion=REGION(16,1) Type=ub // Intra prediction mode // End of intra_header.inc #endif // !defined(__INTRA_HEADER__)