/* * Header file for all AVC INTER prediction kernels * Copyright © <2010>, Intel Corporation. * * Permission is hereby granted, free of charge, to any person obtaining a * copy of this software and associated documentation files (the * "Software"), to deal in the Software without restriction, including * without limitation the rights to use, copy, modify, merge, publish, * distribute, sub license, and/or sell copies of the Software, and to * permit persons to whom the Software is furnished to do so, subject to * the following conditions: * * The above copyright notice and this permission notice (including the * next paragraph) shall be included in all copies or substantial portions * of the Software. * * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS * OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT. * IN NO EVENT SHALL PRECISION INSIGHT AND/OR ITS SUPPLIERS BE LIABLE FOR * ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, * TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION WITH THE * SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE. * * This file was originally licensed under the following license * * Licensed under the Apache License, Version 2.0 (the "License"); * you may not use this file except in compliance with the License. * You may obtain a copy of the License at * * http://www.apache.org/licenses/LICENSE-2.0 * * Unless required by applicable law or agreed to in writing, software * distributed under the License is distributed on an "AS IS" BASIS, * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. * See the License for the specific language governing permissions and * limitations under the License. * */ #if !defined(__INTER_HEADER__) // Make sure this file is only included once #define __INTER_HEADER__ // Module name: inter_header.inc // // Header file for all AVC INTER prediction kernels // #define INTER_KERNEL //------------------------------------------------------------------------------------------- // TODO: The followings will be merged with the above definitions later //------------------------------------------------------------------------------------------- //------------ Input parameters & bit masks // SW WA for weighted prediction - 2007/09/06 //.declare guwR1 Base=r1 ElementSize=2 Type=uw //.declare guwW128 Base=r63.13 ElementSize=2 Type=uw #ifdef DEV_ILK // #define SW_W_128 // Enable SW WA for special Weight=128 case. Can be commented to disable it #else // Pre DEV_ILK #define SW_W_128 // Enable SW WA for special Weight=128 case. #endif // DEV_ILK #ifdef SW_W_128 .declare gudW128 Base=r1.0 ElementSize=4 Type=ud #else #endif // SW_W_128 #define gORIX r3.4 // :ub, X origin #define gORIY r3.5 // :ub, Y origin #define gCBP r3.9 // :ub, CBP (0, 0, Y0, Y1, Y2, Y3, Cb, Cr) #define nCBPY_MASK 0x3c #define nCBPU_MASK 0x2 #define nCBPV_MASK 0x1 #define gFIELDFLAGS r3.1 // :uw - To compute message descriptor for write #define gMBTYPE r3.1 // :ub, MB type #define nMBTYPE_MASK 0x1f #define gFIELDMBFLAG r3.1 // :ub, Field MB flag #define nFIELDMB_MASK 0x40 #define gMBPARITY r3.3 // :ub, Bottom field flag #define nMBPARITY_MASK 0x01 #define gWPREDFLAG r3.0 // :ub, Weighted pred flag #define nWBIDIR_MASK 0xc0 #define gSUBMB_SHAPE r3.12 // :ub, Sub-MB shape #define gSUBMB_MODE r3.13 // :ub, Sub-MB prediction mode .declare guwSUBMB_SHAPE_MODE Base=r3.6 ElementSize=2 Type=uw #define gYWDENOM r3.14 // :ub, Luma log2 weight denom #define gCWDENOM r3.15 // :ub, Chroma log2 weight denom #define gADDR r3.24 // :ub, Register addresses of error data / MV .declare gubBIDX Base=r3.16 ElementSize=1 Type=ub #define gWGT r8 // Weights/offsets .declare gdWGT Base=r8 ElementSize=4 Type=d .declare gwWGT Base=r8 ElementSize=2 Type=w #define gMV r4 // MVs .declare gwMV Base=r4 ElementSize=2 Type=w .declare gdMV Base=r4 ElementSize=4 Type=d .declare gwERRORY Base=r10 ElementSize=2 Type=w // 16 GRFs .declare gubERRORY Base=r10 ElementSize=1 Type=ub .declare gwERRORC Base=r26 ElementSize=2 Type=w // 8 GRFs .declare gubERRORC Base=r26 ElementSize=2 Type=ub //------------ Address registers #define pMSGDSC a0.0 // ud: Must be the leading dword of the address register #define pREF a0.0 #define pBIDX a0.2 #define pWGT a0.3 #define pERRORYC a0.2 // :ud #define pERRORY a0.4 #define pERRORC a0.5 #define pMV a0.6 #define pWGT_BIDX a0.1 // :ud, WGT & BIDX #define pRECON_MV a0.3 // :ud, RECON & MV #define pREF0 a0.0 // :uw #define pREF0D a0.0 // :ud #define pREF1 a0.1 #define pREF2 a0.2 #define pREF2D a0.1 // :ud #define pREF3 a0.3 #define pREF4 a0.4 #define pREF4D a0.2 // :ud #define pREF5 a0.5 #define pREF6 a0.6 #define pREF6D a0.3 // :ud #define pREF7 a0.7 #define pRES a0.6 #define pRESD a0.3 // :ud #define pRESULT a0.7 #define p0 a0.0 #define p1 a0.1 //------------ Constants for static/inline/indirect #define nOFFSET_BIDX 112 // = 32*3+4*4 #define nOFFSET_WGT 256 // = 32*8 #define nOFFSET_WGT_BIDX 0x01000070 // = (256<<16)+112 #define nOFFSET_ERROR 0x03400140 // = (320+128*4)<<16+320=0x03400140 #define nOFFSET_ERRORY 0x0140 #define nOFFSET_ERRORC 0x0340 #define nOFFSET_MV 128 // = 32*4 #define nOFFSET_RECON_MV 0x04400080 // = (1088<<16)+128 // TODO: OFFSET_RECON is obsolete //------------ Constants for kernel internal variables #define nOFFSET_INTPY0 0x0640 // = 32*50 #define nOFFSET_INTPY1 0x0780 // = 32*60 #define nOFFSET_INTPC0 0x06c0 // = 32*54 #define nOFFSET_INTPC1 0x0480 // = 32*36 #define nOFFSET_INTP0 0x06c00640 #define nOFFSET_INTP1 0x04800780 #define nOFFSET_INTERIM 0x0480 // = 32*36 #define nOFFSET_INTERIM2 0x04A00480 // = ((32*37)<<16)|(32*36) #define nOFFSET_INTERIM3 0x04A00480 // = ((32*36+32)<<16)|(32*36) #define nOFFSET_INTERIM4 0x04A00490 // = ((32*37)<<16)|(32*36+16) #define nOFFSET_INTERIM4x4 0x04C0 // = 32*38 #define nOFFSET_INTERIM4x4_4 0x04E004D0 // = ((32*38+32)<<16)|(32*38+16) #define nOFFSET_INTERIM4x4_5 0x04D004C0 // = ((32*38+16)<<16)|(32*38) #define nOFFSET_INTERIM4x4_6 0x04E004C0 // = ((32*38+32)<<16)|(32*38) #define nOFFSET_INTERIM4x4_7 0x04D004C8 // = ((32*38+16)<<16)|(32*38+8) #define nOFFSET_INTERIM4x4_8 0x04E004D8 // = ((32*38+32)<<16)|(32*38+24) #define nOFFSET_INTERIM4x4_9 0x04F004E8 // = ((32*38+48)<<16)|(32*38+40) #define nOFFSET_RES 0x540 // = 32*42 #define nOFFSET_REF 0x560 // = 32*43 #define nOFFSET_REFC 0x700 // = 32*56 // Binding table index #define nBDIX_DESTY 0 #define nBDIX_DESTC 1 #define nBI_LC_DIFF 0x10 // Binding table index diff between luma and chroma #define nGRFWIB 32 #define nGRFHWIB 16 //------------ Regions .declare gudREF Base=r43 ElementSize=4 SrcRegion=<16;16,1> Type=ud .declare gubREF Base=r43 ElementSize=1 Type=ub .declare gudREFC Base=r56 ElementSize=4 SrcRegion=<16;16,1> Type=ud // 16x16 handling .declare gudREF21x21 Base=r58 ElementSize=4 SrcRegion=<16;16,1> Type=ud .declare gudREF18x10 Base=r66 ElementSize=4 SrcRegion=<16;16,1> Type=ud .declare gubREF18x10 Base=r66 ElementSize=1 SrcRegion=<16;16,1> Type=ub .declare gudREF16x16 Base=r38 ElementSize=4 Type=ud // 8 GRFs .declare gubREF16x16 Base=r38 ElementSize=1 Type=ub .declare gudREFC16x8 Base=r46 ElementSize=4 Type=ud // 4 GRFs .declare gubREFC16x8 Base=r46 ElementSize=1 Type=ub // TODO .declare gubAVG Base=r56 ElementSize=1 Type=ub .declare gubREFY_BWD Base=r64 ElementSize=1 Type=ub .declare gubREFC_BWD Base=r72 ElementSize=1 Type=ub .declare guwINTPY0 Base=r50 ElementSize=2 SrcRegion=<16;16,1> Type=uw .declare gudINTPY0 Base=r50 ElementSize=4 Type=ud .declare gubINTPY0 Base=r50 ElementSize=1 SrcRegion=<32;16,2> Type=ub .declare guwINTPY1 Base=r60 ElementSize=2 SrcRegion=<16;16,1> Type=uw .declare gudINTPY1 Base=r60 ElementSize=4 Type=ud .declare gubINTPY1 Base=r60 ElementSize=1 SrcRegion=<32;16,2> Type=ub .declare guwYPRED Base=r50 ElementSize=2 SrcRegion=<8;8,1> Type=uw .declare gubYPRED Base=r50 ElementSize=1 SrcRegion=<32;16,2> Type=ub .declare guwINTPC0 Base=r54 ElementSize=2 SrcRegion=<16;16,1> Type=uw .declare gwINTPC0 Base=r54 ElementSize=2 SrcRegion=<16;16,1> Type=w .declare gudINTPC0 Base=r54 ElementSize=4 Type=ud .declare gubINTPC0 Base=r54 ElementSize=1 SrcRegion=<32;16,2> Type=ub .declare guwINTPC1 Base=r36 ElementSize=2 SrcRegion=<16;16,1> Type=uw .declare gudINTPC1 Base=r36 ElementSize=4 Type=ud .declare gubINTPC1 Base=r36 ElementSize=1 SrcRegion=<32;16,2> Type=ub .declare guwCPRED Base=r54 ElementSize=2 SrcRegion=<16;8,2> Type=uw .declare gubCPRED Base=r54 ElementSize=1 SrcRegion=<32;8,4> Type=ub #define gINTERIM r36 .declare gubINTERIM_BUF Base=r36 ElementSize=1 SrcRegion=<32;16,2> Type=ub #define gINTERIM4x4 r38 .declare gubINTERIM4x4_BUF Base=r38 ElementSize=1 SrcRegion=<32;16,2> Type=ub .declare gwINTERIM4x4_BUF Base=r38 ElementSize=2 Type=w .declare gubINTERIM_BUF2 Base=r42 ElementSize=1 SrcRegion=<8;4,2> Type=ub .declare gwINTERIM_BUF2 Base=r42 ElementSize=2 SrcRegion=<16;16,1> Type=w .declare guwINTERIM_BUF2 Base=r42 ElementSize=2 Type=uw .declare gwINTERIM_BUF3 Base=r38 ElementSize=2 SrcRegion=<16;16,1> Type=w // 2 GRFs .declare gubINTERIM_BUF3 Base=r38 ElementSize=1 Type=ub .declare gwTEMP Base=r42 ElementSize=2 SrcRegion=<16;16,1> Type=w //------------ General registers #define gX r3.2 // w #define gY r3.3 // w #define gMSGDSC_R r3.6 // ud #define gMSGDSC_W r3.7 // ud #ifdef SW_W_128 .declare gwMBTYPE Base=r8.6 ElementSize=2 Type=w // Shared with gLOOP_SUBMB // TODO #define gLOOP_SUBMB r8.6 #define gLOOP_SUBMBPT r8.7 #define gLOOP_DIR r9.6 #define gLOOPCNT r9.7 // Loop counter for submodules #else .declare gwMBTYPE Base=r1.0 ElementSize=2 Type=w // Shared with gLOOP_SUBMB // TODO #define gLOOP_SUBMB r1.0 #define gLOOP_SUBMBPT r1.1 #define gLOOP_DIR r8.7 #define gLOOPCNT r9.7 // Loop counter for submodules #endif // SW_W_128 #define gW0 r34.6 // Temporary WORD #define gW1 r34.7 // Temporary WORD #define gW2 r34.8 // Temporary WORD #define gW3 r34.9 // Temporary WORD #define gD0 r34.3 // Temporary DWORD #define gW4 r34.15 // #define gMVX_INT r34.0 // :w #define gMVY_INT r34.1 // :w #define gMVX_FRAC r34.2 // :w #define gMVY_FRAC r34.3 // :w #define gMVX_FRACC r34.4 // :w #define gMVY_FRACC r34.5 // :w #define gpINTPY r34.10 #define gpINTPC r34.11 #define gpINTP r34.5 // DW #define gPREDFLAG r34.12 #define gBIDX r34.13 #define gREFPARITY r34.14 #define gCHRMVADJ r1.14 #define gPARITY r1.15 #define gCBP_MASK r1.1 #define gMVSTEP r1.13 #define gpADDR r1.2 // :uw (8 words) #define gSHAPETEMP r8.15 // :uw #define gCOEFA r42.0 #define gCOEFB r42.1 #define gCOEFC r42.2 #define gCOEFD r42.3 // Weighted prediction #define gPREDFLAG0 r46.0 #define gPREDFLAG1 r46.2 #define gWEIGHTFLAG r43.2 #define gBIPRED r43.3 #define gYADD r43.4 #define gCADD r43.5 #define gYSHIFT r43.6 #define gCSHIFT r43.7 #define gOFFSET r44.0 #define gUOFFSET r44.1 #define gVOFFSET r44.2 #define gWT0 r45.0 #define gO0 r45.1 #define gWT1 r45.2 #define gO1 r45.3 #define gUW0 r45.4 #define gUO0 r45.5 #define gUW1 r45.6 #define gUO1 r45.7 #define gVW0 r45.8 #define gVO0 r45.9 #define gVW1 r45.10 #define gVO1 r45.11 #define gWT0_D r45.0 #define gUW0_D r45.2 //------------ Message-related Registers & constants #define gMSGSRC r2 // Message Source #define mMSGHDR m1 #define mMSGHDRY m1 #define mMSGHDRC m2 #define mMSGHDR1 m1 #define mMSGHDR2 m2 #define mMSGHDR3 m3 #define mMSGHDR4 m4 #define mMSGHDRYW m1 #define mMSGHDRCW m10 #ifdef DEV_ILK // 0000 0100(read) 0001(msg len) xxxx(resp len) 1010 (sampler cache) xxxx (field/frame) xxxx xxxx (bidx) #define nDWBRMSGDSC_SC 0x0208A002 // DWORD Block Read Message Descriptor through Data Port, Sampler Cache #define nDWBRMSGDSC_SC_TF 0x0208E602 // DWORD Block Read Message Descriptor through Data Port, Sampler Cache #define nDWBRMSGDSC_SC_BF 0x0208E702 // DWORD Block Read Message Descriptor through Data Port, Sampler Cache // 0000 0101(write) 0001(msg len) xxxx(resp len) 0010 (render cache) xxxx (field/frame) xxxx xxxx (bidx) #define nDWBWMSGDSC 0x02082000 // DWORD Block Write Message Descriptor through Data Port, Render Cache #define nDWBWMSGDSC_TF 0x02082600 // DWORD Block Write Message Descriptor through Data Port, Render Cache #define nDWBWMSGDSC_BF 0x02082700 // DWORD Block Write Message Descriptor through Data Port, Render Cache #else // Pre DEV_ILK // 0000 0100(read) 0001(msg len) xxxx(resp len) 1010 (sampler cache) xxxx (field/frame) xxxx xxxx (bidx) #define nDWBRMSGDSC_SC 0x0410A002 // DWORD Block Read Message Descriptor through Data Port, Sampler Cache #define nDWBRMSGDSC_SC_TF 0x0410A602 // DWORD Block Read Message Descriptor through Data Port, Sampler Cache #define nDWBRMSGDSC_SC_BF 0x0410A702 // DWORD Block Read Message Descriptor through Data Port, Sampler Cache // 0000 0101(write) 0001(msg len) xxxx(resp len) 0010 (render cache) xxxx (field/frame) xxxx xxxx (bidx) #define nDWBWMSGDSC 0x05102000 // DWORD Block Write Message Descriptor through Data Port, Render Cache #define nDWBWMSGDSC_TF 0x05102600 // DWORD Block Write Message Descriptor through Data Port, Render Cache #define nDWBWMSGDSC_BF 0x05102700 // DWORD Block Write Message Descriptor through Data Port, Render Cache #endif // DEV_ILK #define nDWB_FIELD_MASK 0x0600 // message data payload .declare mbMSGPAYLOADY Base=m2 ElementSize=1 SrcRegion=REGION(16,1) Type=b .declare mbMSGPAYLOADC Base=m11 ElementSize=1 SrcRegion=REGION(16,1) Type=b // Destination registers for write commit #define gREG_WRITE_COMMIT_Y r10.0 #define gREG_WRITE_COMMIT_UV r11.0 #define RETURN_REG_INTER r1.5 // Return pointer for all sub-routine calls (type DWORD) #define CALL_INTER(subFunc, skipInst) add (1) RETURN_REG_INTER<1>:ud ip:ud 1+skipInst*INST_SIZE \n\ jmpi (1) subFunc #define RETURN_INTER mov (1) ip:ud RETURN_REG_INTER<0;1,0>:ud // Return to calling module // End of inter_header.inc #endif // !defined(__INTER_HEADER__)