Antal Novak sent these instructions for imwheel on FreeBSD, plus a few patches...ENJOY! (slightly edited for content and to fit your screen) I currenly have FreeBSD-3.0 (although this should work with 2.2.6, or even earlier) and a Microsoft IntelliMouse PS/2. I did the following to get it to work: 1) To run moused, use the -t sysmouse (NOT PS/2!!!) argument for a ps/2 mouse, or -t intellimouse for the serial version (note, i've never tried the serial version, so i'm not *positive* it will work... I'd like some feedback on this if possible) 2) Run imwheel using method #1 as described in the imwheel README. However, your XF86Config *must* be set up as follows (since there is no FreeBSD XFree86 support for IMPS/2 because it can't preinitialize the ps/2 port): Section "Pointer" Protocol "IntelliMouse" Device "/dev/sysmouse" ZAxisMapping 4 5 EndSection You can add other options if you want; however, it is important that you use the IntelliMouse protocol and read from /dev/sysmouse (this is the passthrough device for moused). Basically, the way moused works is that you can use *ANY* protocol for reading /dev/sysmouse. Therefore, since we can't use IMPS/2, we simply use IntelliMouse, so X thinks it's a serial IntelliMouse, and everything is passed through! Oh yeah, one final note, gpm is NOT needed (nor will it even compile) on FreeBSD.