This is the Python interface to the Ifeffit library. It assumes that you have python 1.5.2 (or later) installed on your system. Installation instructions: Type 'python setup.py install' as root. Detailed Instructions: 1. build and INSTALL the ifeffit library. The ifeffit library must be installed for the python extension to work properly. If you're building this from the standard distribution, a site_install.py file should already be in this directory. If not (or if you are building this after the Ifeffit library has been installed) copy this files from the ifeffit directory: cp /usr/local/share/ifeffit/config/site_install.py . (the exact location may be different, depending on how ifeffit was built and installed). Normally, you should not need to alter site_install.py, but if you run into trouble, you may want to look at this file for hints of how it thinks Ifeffit is installed on your system. 2. type 'python setup.py build' this will build the python extension for your system. 3. type 'python setup.py install' (do this as root) to install. 4. If python has been installed with Tkinter capabilities (see notes on installing python), then gifeffit, the graphical user interface will be installed with the above installation. Since gifeffit requires the additional Pmw widgets, these will also be installed if needed. Matt Newville